I have a number of buttons on a daashboard that run different macros.
Is it possible to have the most of the buttons deactivated until a cell on a different sheet has a value in the there (Text or number) turning them active?
I was wondering if there is a way to enable a button when a cell is filled in. the button is disable by default.
I have an index page with hundreds of worksheets (poor spreadsheet design i know) I am looking for a button to go next to the sheet name on the index sheet, read the cell in the button's macro code and when pushed go to that sheet's location. I can easily make a button to go to one sheet but with hundreds of sheets this becomes a monotonous task. Example
Index Sheet
Sheet 2 (Button) <-- Button reads the text, takes you to the "Sheet 2" location
Sheet 3 (Button)
Sheet 4 (Button
Sheet 5 (Button)
I want to click a specific button on a webpage but there is different buttons with same name (in view source) but tabindex is different.I want to click a button where tabindex = 7.
Here is the button related HTML Code.
I am trying to write a macro that activates the following funtion in cell D1.
=HYPERLINK("#"&C2,"")
I have recorded the following macro but it only jumps to the cell the function is in rather than actually activating the function and jumping to reference which has been selected in C2.
I know that I can assign a keyboard shortcut to run a macro, but I have multiple items that are activated by command buttons and would like to be able to trigger them all with one keystroke.
View 6 Replies View RelatedHow would you activate a button, if one hits enter while in the cell that contains the button?
View 9 Replies View RelatedVBA Code To Activate/Press Button On Web Page. press a button on web page using VBA
View 4 Replies View RelatedI have a button on a sheet which needs to remain protected.
However, the button code does not activate when the sheet is protected...
Any hints on how to "unprotect" just the button?
is it possible to deactivate an activecell?
the following code works well i have a range of cells(e1:o17) i click on one of those cells to enter a score into (a2) the next cell i click enters a score into (b2) ok so far but if i need to enter the same score consecutively as needs to be done from time to time i cant do it because the cell is still active.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Range("d1") = Range("d1") + 1
If Range("D1") = 2 Then Range("a2") = ActiveCell.Value: Range("c2") = 501 - Range("a2")
If Range("D1") = 3 Then Range("a3") = ActiveCell.Value: Range("c3") = Range("c2") - Range("a3")
If Range("D1") = 4 Then Range("a4") = ActiveCell.Value: Range("c4") = Range("c3") - Range("a4")
If Range("D1") = 5 Then Range("a5") = ActiveCell.Value: Range("c5") = Range("c4") - Range("a5")
I have developed a Userform button in Excel 2010 using the developer icons, which when clicked on with my mouse it runs my super dooper macro. It works great!
But one thing I want to have happen is to have the choice of using the Enter key to start the macro or use the left mouse button
For example, I place data in (say) cell A1 and the userform button is in cell A2. When I place the data in A1 and press the Enter key, the cursor moves down to A2, but doesn't highlight the user button. When I press the Enter key again, the cursor moves to cell A3.
What I want is when I fill in the data in A1 and press the Enter key, the cursor moves to cell A2 and selects the button, so that when I press the Enter key again, it activates the macro.
I have placed the following code in my spreadsheet but it's not working!
the code after option explicit (now at the bottom) works, (thanks to Andy on here!) but all the disabling the right click and cut/copy/paste etc doesn't.
I have a workbook with the following:
Code:
Private Sub Workbook_Activate()
Application.CommandBars("Ply").Enabled = False
Application.ExecuteExcel4Macro "SHOW.TOOLBAR(""RIBBON"",FALSE)"
End Sub
Code:
Private Sub Workbook_Deactivate()
Application.CommandBars("Ply").Enabled = True
Application.ExecuteExcel4Macro "SHOW.TOOLBAR(""RIBBON"",TRUE)"
End Sub
All of a sudden my right-click isn't enabling when I reopen Excel. I can run the macro
Code:
Application.CommandBars("Ply").Enabled = True
once opened, but once I close it out again, the right-click is disabled.
I have an excel sheet with date as the first column and all other data being numeric. I put in a code to increment by 1 everytime the user clicks on a cell, the contents within it. the code is below.
VB:
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
If Not Intersect(Target, Range("B2:H100")) Is Nothing Then
Cancel = True
Range(Target.Address).Value = Val(Range(Target.Address).Value) + 1
End If
End Sub
This does its job for the time being, but I want to allow changes only to the row which has the current date and deactivate all other rows for any editing. So that if I click anywhere else but the row with the current date nothing happens.
I have some code in the BeforeClose event of the workbook - it worked the first time I tried to shut down the wb, but never since. I opened a new wb and copied in the code and again, it worked first time, but not since. The code is just calling a function, nothing heavy. I've tried the Deactivate event as well. I'm more of an Access VBA kind of gal, so don't know if I'm missing something big here.
View 5 Replies View RelatedI need to perform an action (unhide all columns) whenever I switch to a different worksheet.
Detail: I have a file with 2 tabs (worksheets). Tab 1 contains daily data, and when people are done with the current week they group and hide the columns for that week. This allows them to only view the new week and do an easy copy/paste into other applications. Tab 2 totals up the daily data from Tab 1 and shows monthly totals. The problem is that when they hide Tab 1 columns for past days, the formulas in Tab 2 don't "find" that hidden data. I would like to write a basic code that unhides all Tab 1 columns when I switch to Tab 2 so the formulas on Tab 2 reflect accurate totals. My thought is that it would be Worksheet code on Tab 1 using "Deactivate". I've tried to piece together different bits of code but can't get anything to work properly. I don't want them to have to run a macro or click a button, I'd like it to be automated when they switch tabs.
The following code does a sort on a worksheet whenever you click another sheet but it also returns you to the original sheet (where the sort takes place i.e. the sheet with Range "Sort1"). How do I get the code to do the sort but not keep returning to the sheet?
Private Sub Worksheet_Deactivate()
Application.Goto Reference:="Sort1"
Selection.Sort Key1:=Range("A3"), Order1:=xlAscending,
End Sub
I have an Offset of a range I am testing the value of with an If statement.
For some reason, even though the value fed in is 1 and it should bypass the If statement, it doesn't. However, if I assign the offset value to a variable first, the If statement works...
This does not work...
The following code for a custom menu is used in a workbook which has two sheets with
embedded charts, two chart sheets and several sheets for calculations
and information
In This Workbook
Private Sub Workbook_Activate() 'Changed Activate to Open
Run "AddMenus"
End Sub
and
Private Sub Workbook_Deactivate() 'Changed Deactivate to Close
Run "DeleteMenu"
End Sub
and
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Run "DeleteMenu"
End Sub
Basically, I'd like my macro to be activated whenever the value in cell A4 changes. Cell A4 has a numerical value between 1 and 10. The macro clears a contents table. Here it is:
Sub Clear()
Sheets('Form').Select
Range("H4:L10").Select
Selection.ClearContents
End Sub
How to get the (module) macro to be activated whenever cell A4 changes value?
I have code that calls a dataform when I click on a command button. Regardless of where I am in the row, the command button is in column A. I want the selected cell to move to column B in the same row so that when the userform displays it will show the correct data. (I have used
Private Sub UserForm_Initialize()
Container.Value = ActiveCell.Value
PONumbers.Value = ActiveCell.Offset(0, -1).Value
SizeType.Value = ActiveCell.Offset(0, 1).Value
Vessel.Value = ActiveCell.Offset(0, 2).Value
'etc
End Sub
to populate my userform.
Can I add something in my call code to also select the cell I want? Or alter the initialization code to start at the beginning of that row?
I have an excel file that I want a macro to run when the cell changes to "Yes" (location B21). The cell options right now in a drop down list is "Yes" or "No". The Macro is called helper. How do I get this to work when they pick yes or no from the drop down list. I wanted to attach the file in this post, but it will not let me. I can email it to anyone who would like to work on it.
View 9 Replies View Relatedi'm trying to combine vlookup and activecell here.
based on value that the user enter it'll activate the first cell on the row.
example:
a1:id
a2:1
a3:2
a4:3
b1:name
b2:josh
b3:alex
b4:ray
the user will input the id, and using vlookup i want to find the id and set the first column as an activecell. So for example the user input is 3, i want a3 to be the activecell.
What code can one use to Activate a worksheet on a workbook by using a Cell value on a worksheet.
View 4 Replies View RelatedI am trying to activate a window and the name of the window to be in a cell. lets say: Windows(file2.xls).Active
I want something like this: The name of the file is in B2 cell in tab Sheet1 in file file1.xls so the line will be like:
Windows(.............).Active
i do not know what function to use.
I'm trying to do something quite simple but I can't seem to see the forest thru the trees.
All I want to do is when I deactivate a worksheet (sheet2) I want it to sort a predfined range. I keep getting a "Select Method of Range Class Failed" error message on the line of code with ******
The code is as follows: ...
I have a user form containing a calendar. What I'm trying to do is that if any cells are selected in a range - D4:E83 - then I want to run the userform therein forcing the user to use the calendar and ensure the date is correctly formatted.
The userform is named frmCalendar.
i need a VBA code to activate workbook (which is already opened) with reference to name in cell A1
in Cell A1 is "masterworksheet.xls"
I want to activate the sheet based on my cell value but the prog is not working.
Sub emptest()
Dim tempname As String
Worksheets("team").Select
Range("c24").Select
Do While ActiveCell.Value ""
If ActiveCell.Value = tempname Then
Worksheets(tempname).Select
Else
MsgBox "no sheet"
End If
ActiveCell.Offset(1, 0).Select
Loop
End Sub
When I select a specific sheet I would like cell A1 to be selected using VBA.
View 2 Replies View Related