I am trying to create a formula to count a range relative to a dynamic reference (at least I think that's you would phrase it).
I thought I was on to a winner with this:
Formula:
[Code] .....
But it doesn't seem to accept the : as a legal operator.
I suspect the answer is to use SUMPRODUCT somehow.
I have a data that is split into multiple cells and needs to concatenated. Unfortunately, the number of columns wherein lies the data varies throughout the workbook. As such, I wanted to select a range of cells, define this range as the reference point for the macro, run the macro, then move on (selecting a different number of columns on the next try).
For example, I have this:
A
B
C
D
E
1
No
Not Very Far
[Code] .....
I want to select cells A1:B1, run a macro concatenated the two columns, then select cells C1:E and run the same macro to get this:
A
B
1
No
Not Very Far
[Code] ........
So far, I have this:
Code:
ActiveCell.Columns("A:A").EntireColumn.Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
ActiveCell.Offset(5, 0).Range("A1").Select
ActiveCell.FormulaR1C1 = "=CONCATENATE(RC[1],RC[2])" '
I'm trying to use relative references and am have having trouble with selecting a range for the fill down command.
I'd like to copy a formula down in the last column from row 1 to the last row with data. Column D is static so I can always use it to find the last row. The last column will vary; sometimes it might be G another time it might be X. I'm able to get the formula entered into the proper cell but I can't figure out how to select the range for a fill down.
If I was not using relative references and cell X1 always had the formula then Id code it like this:
'*** Find last row with data
Range("D1").Select
LastRow = Range("D65536").End(xlUp).Row
'*** Calculate length of cell in previous column
[Code]....
It's the last range statement that stops me. I haven't come up with a variation that allows me to select a range from the cell on the first row of the last column and select the last row with data for the same column.
I've been trying to get the sum of a range of cells based on their relation to the active cell. Here is the Pseudo
If the SUM of (the cell 2 rows up THROUGH the cell 2 rows up and 2 columns to the left) = 0 then .......
*****end pseudo
I think that activecell.offset is the best way to do it, but I can't figure out how to work that in a range....
Here is my code so far:
Worksheets("Generic SPC").Activate
Worksheets("Generic SPC").Range("c2").Select
'Do for all cells in the row
Do
ActiveCell.Offset(0, 1).Select
If Application.WorksheetFunction.Sum(Range( _
ActiveCell.Offset(-2, 0), ActiveCell.Offset(-2, 2))) = 0 Then
ActiveCell.Value = 0
ElseIf Application.WorksheetFunction.Sum(Range _
("ActiveCell.Offset(-2, 1), ActiveCell.Offset(-2, 3)")) = 0 Then
ActiveCell.Value = ActiveCell.Offset(-2, 0).Value
Else: ActiveCell.Value = 0
End If
Loop Until IsEmpty(ActiveCell.Offset(0, 1)) = True
******End Code
Range doesn't like activecell.offset. Does anyone know how to do this?
In my data validation I have the following formula as the Source: =INDIRECT(SUBSTITUTE($F$2," ","_")). I want to be able to copy the cell and paste it into another cell and have the formula update to reference the new cell. Currently the validation is for cell G2 and references F2. I want to be able to copy G2 and paste it in G3-G6 having the formula update so it refrences F3-F6.
View 3 Replies View RelatedI have encountered some difficulty in modifying a macro I wrote into what I need. I created a macro that searches a column (Column C) for a cell value of, "stop", and then it copies everything above that cell and pastes it onto another sheet. In the sample data set that I was using, "stop" first occurred in cell C541, so the macro copies C1:C540 and pastes it onto another sheet. The problem is that the macro created an absolute reference to C540. What I desire is for the macro to use the 'Find' function to locate the first occurrence of, "stop", offset one cell above that cell, and then reference the active cell (which was positioned by these last two steps) in the range that should be copied. Basically, I'm hoping to have cells C1 through the active cell copied and then pasted onto another sheet.
Code below.
Sub FAIL()
'
' FAIL Macro
'
'
Sheets("Reformatted").Select
Columns("C:C").Select
Selection.Find(What:="stop", After:=ActiveCell, LookIn:=xlValues, LookAt _
[Code] .......
I have a sumproduct function that is aimed at a big block of data. Is there a way that I can write the function to where it will always find the last row of the data set and adjust accordingly?
For example if right now the range is A1:G2000 and next month I add 20 rows of data I want the sumproduct ranges to automatically adjust to A1:G2020.
In the attached spreadsheet I am trying to always reference the sum column from Qty in Det Est.
This is because the number of roads changes for each project.
I created a dynamic range name surfacing with the following formula:
=offset(qty!$a$1,0,0,counta(qty!$A$A), counta(qty!$1$1)).
My question is what formula do I use to reference the sum column for each row on the Det Est Sheet.
I have a problem creating a circular reference with dynamic ranges. I have searched already but can't find the specifc problem. I have a spreadsheet where I use vba code to insert extra columns. Within the worksheet there are sum calculations at the end of each row. When I add a new column within the table I would like the sum calculation to expand to account for this extra column.
Now, I thought that dynamic ranges would be the way to go but the only way I can see to do it creates a circular reference as the CountA function trys to count the cell with the sum function in it.
I am trying to create a pivot table on a new sheet names as 4x4
I am getting following error:
Error : 1004
Reference Not Valid
I am not sure where is the problem. I have generated this code by using macro recorder and just changed the source and destination of the pivot generation code.
I want to count blanks in a horizontal range (all in one row) that will change (dynamic range). The values in the range could be numbers or words. Some values may be added to the end, but there may still be some empty cells to the right of the last value. My goal is to count blanks in the range up to the last entered value, but no beyond that. As an example:
A6 = 2
B6 = empty cell
C6 = 2
D6 = empty cell
E6 = tt
F6 = empty cell
The range for the count blanks would be A6:E6. F6 is not included because the last entered value is in cell E6.
The answer (count blanks in dynamic range) should be 2.
I have got these 3 formulas to work, but it seems that there must be a better (shorter, faster calculating, more elegant) formula than these:
=COUNTBLANK(OFFSET(A6,,,,MATCH(9.9E+307,MATCH(A6:F6,A6:F6)+TRANSPOSE(ROW(INDIRECT(""1:""&COLUMNS(A6:F6)))))))
=COUNTBLANK(OFFSET(A6,,,,MATCH(9.9E+307,MATCH(A6:F6,A6:F6)+{1,2,3,4,5,6})))
=COUNTBLANK(A6:INDEX(A6:F6,MATCH(9.9E+307,MATCH(A6:F6,A6:F6)+TRANSPOSE(ROW(INDIRECT(""1:""&COLUMNS(A6:F6)))))))
I have created a Macro in VBA which takes a data set, puts in in a pivot table which I then use to sort/select etc. after that I copy the data in a new sheet as ' values only' with paste special.
As the source date is variable (number of lines can vary) I have set the macro to take the variable number of rows into account.
Evertyhing works as it should.
Now my question:
in the final sheet, I want to fill the first empty column at the end of all filled-in columns with a count function. selecting the last column works, but I have problems with making the COUNT function variable. It should count the number of cells with a value in it. However as the number of columns can vary, the count function should take that into account. Furthermore, it should never take the first and last column into account.
Here's where I got stuck: ...
Assume this Data in a spreadsheet
I want to count blank "PI" based on "Product name" & "Product date" occurence together
So I created intermediate field "IS Blank", and I dunno what formula can give me the below results
My obective to get this result
CountBlank for PI = 3
--------------------------------------------------------------------------------
Product Name..... Product Date.... PI...... IsBlank "PI" [Desired Formula output]
xxx .......................ddd ...............Blank.................. 1
xxx .......................ddd ...............Blank.................. 0 (counted above for same xxx&ddd)
xxx .......................ddd222 ..........Blank.................. 1 (PD changed to ddd222)
yyy ......................ttt............... Blank....................1 (another product,yyy)
yyy .....................ttt ...............Blank......................0 (same product and date, so not counting again)
I have a function which copy pastes data into a sheet based on a filter criteria. It is also pasted in a specific layout(shown below) starting from Cell A1 in the top left corner. Therefore the destination sheet could have a different number of rows with values each time.
What I would like to do is count the sum of 'Values' in the destination sheet, and add a total below it.
For example, the [=TOTAL] cell is where I want the total to appear. Below the answer would be 26. But say if Peter wasnt in the record, the formula should still work in identifying the Total as 20.
Title:
Sheridan
Owner
Petrov G
[Code]....
Is there a way I can achieve the desired result? I figured I had to somehow count from the first record by Peter, to the last one, whichever that may be.
I want to apply conditional formatting to a range, but only to the number of rows in the sheet (to avoid formatting blank rows). I am not sure how to insert the row count into the range select.
NumRows = Application.WorksheetFunction.CountA(Range("A1:A65536")) gives me the number of rows, but how do I get that into
Range("A5:F18").Select
18 being the number I want to substitute the row count for.
I am running Excel 2003 on a Win7 system.
Here is my situation:
Each of my data sets spans roughly 75 columns by 250 rows at present, but this could expand. The first 7 rows contain metadata. Columns 2-25 or so contain the raw data, from which everything to the right is calculated. The data sets have most columns in common, but not necessarily all.
In order to tease out the most meaningful information from my data, I frequently sort all or part of it based on varying criteria. When I find a useful sorting criterion, I create a new column with a header that describes the criterion and populate it with a formula that returns a 1 if the condition of interest is met for that row, or a 0 if it is not. For example, if I am doing this in column AA, I might enter
=--(AND($AX8>$AA$4,$Y8>0))
and copy it down to the end of the data. The resulting vector of 1s and 0s quickly re-identify data that meets that criterion even after subsequent resorting. It also makes locating data that meets multiple sorting criteria extremely simple. Essentially, I create a truth table.
Cell $AA$4 in the above example contains a "comparator" value I might wish to change at some point, which would change the subset of data the condition selects for.
Here's the first hard part:
For each data set, I need the ability to generate meaningful plots that includes separate series based on the criteria I have described. However, I also need to retain the ability to resort the data or change the comparator value without disrupting these plots. In other words, the plots must NOT change when the order of the data is changed, but MUST change to display the appropriate data when the comparator changes.
Here's the 2nd hard part:
Once I have this working for one data set, I need to be able to port it to other data sets (which are contained in other workbooks), so that I can compare equivalent plots from each. I also need to minimize the number of manual steps involved in doing so, to avoid human errors and excessive time consumption.
The only other possible complication I can think of at the moment is that, to this point, I have been inserting blank rows to isolate subsets that I do not wish to perform further sorting on from each other.
Right now I am angling toward VBA code that loops through the entire data set to generate base dynamic ranges using the column header row (row 1) as the names, and the entire column of data for the rangeloops through the truth table columns to generate "branch" row ranges for each of the sorting conditions,loops through the entire data set one more time to create "branch" ranges for each of the base ranges.
I could generate some code to accomplish a one-off solution for a given configuration of a single data set (provided there is not a list length limit in a chart series that I'd be violating)...but without a dynamic named range, I don't know how to get to something that would update appropriately. So in essence, I am still stuck at the dynamic range part of this.
a user i'm assisting wants to calculate totals by recording a macro that sums all the rows in a column using relative cell references. this is because the user runs a report that pulls in data that varies. one week the report may contain 40 rows that need to be totaled, and the next week there may be 60 rows that need to be totaled.
here's what i did:place cursor in cell where i want total to appear
go to VIEW menu, MACROS tab, and click USE RELATIVE REFERENCES
click RECORD MACRO
enter name, description, assign shortcut key
go to FORMULAS menu and click AUTOSUM
press RETURN
when i test the macro out on columns containing the same amount of rows, it works fine. but when i run the macro on a column with more rows, it only totals the amount of rows contained in the original macro. see attached.
Creating a named range relative to the active cell? So that I can click on any cell and a named range is created in the adjacent column for 5 rows.
e.g. click cell c5, and a named range from cells d5:d10 is created when i run the macro ...
From a formula, how can I reference other sheets in my workbook via a relative reference as opposed to needing to know the sheet name? I know I can write a macro, but looking for a non-VBA solution.
View 9 Replies View RelatedIm trying to get a message box to pop up if the result of a count formula is greater than one; ie. in a list of data to warn of repeats of a certain key reference.
Ive never had a drama with putting a message box in before but ive only based it off a constant reference whereas in this case, it will be based on a relative reference; for example, when inputted a value in A2, that has the same value in A1, the count formula in B2 will be 2, so i want a message box to come up. Same goes if the same value was put in A3, and B3 was greater than
This is what I need to be doing:
Write cell K5 as a relative reference, absolute reference, mixed reference with the row varying, and mixed reference with the column varying.
How do I do that?
I have recorded macros in the attached file to highlight cells that contain matching initials by using conditional formatting on the first cell and copying it to the remaining cells. The problem is that if rows are inserted above that change the first cell reference then the macro no longer works properly. Is there a way to use a relative cell reference within the macro? The macro buttons are in cells A4 to A13. I have no VB experience and created the macros by recording keystrokes and using tips found in this forum.
View 14 Replies View RelatedI'm trying to do is delete a row of chosen cells in my form (form is locked with a password) using a macro then return back to the first cell below the deleted row. When I run the macro what's happening is that it's returning back to the cell chosen while writing the macro (which is at the very top A7). So if I'm several rows below A7, it deletes the row and then returns all the way back to the top of the form causing the user to have to scroll back down to where they were
View 3 Replies View RelatedI seem to be having problems with using relative RC in vba within an automated reporting spreadsheet..
in my 'left lookup' below.. the R seems to point to row 1 no matter what row i am writing to..
I need to drag a cell using a macro and using relative reference.
i.e. drag activecell to activecell.offset(1,-1)
I have an Excel workbook with multiple worksheets. One of the worksheets has a live data feed for stock updates. I extract data from the live feed (it's in multiple sentences) and pull it into 6 columns. In another worksheet, I pull those 6 columns into the sheet through the use of Index / Match. That second sheet has additional formulas that essentially analyze the data. As the data refreshes, the existing data moves down the column.
What I didn't think about was the fact that at times, a stock may be listed several times because different brokers are offering updates. Because I used Index / Match, it will look for the first match from the top and display that data in the relevant columns. Unfortunately, some of the data needs to stay with the matching row (and stock ticker) but because of the way I wrote the formulas in Index / Match, it just finds the first matching target and displays that data.
I can correct this by using an absolute reference ($) but I can't find a way to "copy down" formulas using absolute references. I also have one column of cells that contain 1 absolute reference and one relative reference.
I'll re-write this manually if I have to but I have 1,800 cells to change.
I went to record a macro but I can't seem to get the relative reference button anywhere. I am using Excel 97 - does anyone know why this might be or how I can get it back?
View 9 Replies View RelatedI am dealing with a workbook that will hold an undetermined amount of worksheets. Each of these worksheets will have have a series of numbers that are summed to a total within one cell. Lets say cell A10. For every spreadsheet, no matter what, this number will be stored in cell A10.
My first sheet will then be a master listing of all the other sheets in the workbook. In column A I will have the names of each sheet and in column B I want excel to list the value of A10 for the corresponding sheet listed in column A
So normally it would look like this on the master sheet
A | B
Sheet 2 | =Sheet2!A10
Sheet 3 | =Sheet3!A10
Sheet 4 | =Sheet4!A10
Where the formula would give me the value of A10 in the respective sheet.
What I would like to do is, within column B, I want to replace the sheet reference with the cell that contains the name of the sheet. So it would then be a formula similar to the below setup(Although this does not work because I have tried it)
A | B
Sheet 2 | =A1!A10
Sheet 3 | =A2!A10
Sheet 4 | =A3!A10
The hope is that excel would substitute in Sheet 2 for A1 and there by give me the sheet reference that I need. This way I can continuosly add sheets to the workbook and as long as I have the correct Sheet names in column A, all I need to do is drag the formula down column B and I will pull all of the necessary information without having to retype the formula each time.
This is one of about 25 sheets in one excel file, and I will be receiving about 5 different files a week, so a macro is necessary to save time. I tried to create a macro just by recording, and it was not able to adjust to the variances in the number of lines between the sheets.
I need it to do the following, and more or less in this order:
-Delete Column A
-Create text and format A1:C1
-Sort rows 2 through the last row based on column C values (from largest to smallest, although its not shown in the picture above)
-Create a sum at the bottom
-Apply grid lines to all the data
I don't have a problem with the first two, but I cannot figure out how to adjust for the number of rows for sorting, offset 1 cell down to create the sum formula below the data, or how to properly write the macro for the sum formula itself. When I recorded the macro, it used cell references like Range("C5").Select and others which do not adapt to the varying number of rows.
I tried using the offset command in this thread without much luck.
This is some of the macro I have:
Columns("A:A").Select
Selection.Delete Shift:=xlToLeft
Range("A1").Select
ActiveCell.FormulaR1C1 = "Customer ID"
Range("B1").Select
ActiveCell.FormulaR1C1 = "Customer Name"........
I have a workbook with 50 worksheets, each worksheet has an Alpha name (ie names of people). Rather than write some code to go through each worksheet to create a report, is it possible to write a formula in a "Reports" worksheet that reads something like
=worksheet10!f2
where worksheet10! is the number of the worksheet (as seen in the VBA project window) while the name is "Billy".