How To Create VBA To Delete Previous VBA Modules
Jan 27, 2010I would like to create some VBA that looks for sub's or modules and delete them.
View 9 Replies
ADVERTISEMENT
Delete All Modules
Apr 17, 2008I was looking for code that actually deletes ALL modules in the VBA code after I terminate a particular program.
View 2 Replies View RelatedCreate Userform With Existing Modules?
May 12, 2014I wrote some macros that allow me to check info when i input employee number and dates on a worksheet. There are three buttons in my macro which are "Prepare" (do some preparation for the origional data in order to perform check ups later on), "Clear" (clear info in order to perform next check up), "Check" ( Check the info that i need). I already finished the code for all three buttons and they are all functioning.
My question is how to create a userform that allows me to do the same thing as a macro. for example, on the userform window, there should also be three command buttons ("Prepare","Clear","Check") and also there should be three textbox labeled as "Employee Number","DateFrom","Date To" and the value of these textboxes are just the same as the input value for the macro( ie. In the macro, these three inputs are located at cells "B2","C2","D2")
Delete Multiple Modules
Sep 29, 2007I have successfully rewritten all code in one workbook project. I have cut my Standard modules from 17 to just 4 modules.
Is there a way to remove all 17 modules at once so I can replace them with the 4 new ones?
I know that right clicking on the module and then click on "Remove...." will do it, but I would have to do that 17 times.
Not too bad if this was just one workbook to do. I have about 10 other books to do the same thing to. So that would be doing the right click 170 times.
I'm not even sure if this is possible. And if it is, I was thinking at probably having the code in a workbook open event to delete the Standard Modules??? Then I could just import the new modules.
Dynamically Create Userform Through Class Modules?
Feb 15, 2013I have a problem with a dynamic userform that I need to create.
I need a userform in which the number of controls are determined by the some values in the worksheet. The users of the workbook must be able to add new controls to the form, so I do not know the number of controls in advance. I therefore can not create the userform through the design module but must create it through code instead.
I need a userform with a number of comboboxes and a commandbutton, which when clicked sends the content of the comboboxes to the first empty row in a worksheet.
My problem is that I can't assign any commands to the comboboxes (which are created at runtime), nor can I use the values of the comboboxes in any commands assigned to other controls in the userform (e.g. the commandbutton).
I have read as far that I probably need some form of class module to create the controls at runtime, but since I am relatively new at VBA, I'm having trouble getting the class module to work in connection with the userform.
Delete Modules From Multiple Files
Dec 6, 2006I have several organized folders which contain contain, in total, hundreads of files all created from the same master file. The Master file contains several macros used to sort and organize data copied from our engineering database (web-based).
After a file is created the macro is no longer needed. I am looking for some direction on how to go about opening and saving the files which are located on a network drive.
I have found some good starting point here for the actual removal, and I am working on a new master file which doesn't keep the macro when saved (save as...).
Delete Previous Months Data
Feb 15, 2009OK essentially this is my problem:
I have a daily spreadsheet, uou update for inputs and outputs each day and the spreadsheet gets to an overperformance figure (sorry if the spreadsheet is a lottle unclear, it is a simplified version)
On the first day of each month, the opening target is adjusted and you start again. The probelm is you dont know what the opening target is until roughly 21st of the month.
I created a macro that deletes the opening target and removes all the previous days before the start of the month.
The way i done this was:
Create a copy of "daily" tab, change b5 to equals c2 and copy and paste special as values. Then in d5-d58 and f5 - f58, vlookup values from old "daily" tab , and then copy and paste special as values. Then delete old "daily" tab and remname daily(2) as "daily"
What i have done is essentially created a new tab on 21st March, looking back to data only as far back as 1st Mar and the new opening bal and target is found. The macro can be used on the 21st of each month.
but...macro doesnt work, i have tried a few times and i think it is because i am vlookuping up data from a tab that i later delete...please help!! - thanks a mil to anybody that can give me a steer in the right direction.
Macro To Delete Previous Date
Jun 23, 2007I need a macro to loop through a column and delete any date prior to todays date, as well as all cells in the deleted date's row.
View 2 Replies View RelatedCreate Graph Showing Previous 8 Weeks Of Data?
Sep 29, 2011I have used sumif statement to set up a value by week and then used the drop down list cell reference to display what i want ie week 25 data
What I would like is to display the 8 previous weeks and then use this in a graph, so every time i change the drop down week I see all the data showing the current week and previous weeks.
Now the problem is which formula do i use to to identify previous weeks
ie
WK No 21 22 23 24 25
Visits 100 200 250 300 400
Create Data Validation List From Previous Selection?
Nov 15, 2011I have a large set of data that I need to use for data validation in drop down lists. The data is arranged in 4 columns and entries within each column may repeat numerous times. The four columns are as this..
Category Subcategory 1 Subcategory2 Subcategory3
The first data validation will come from the first column. Once this is chosen the second drop down should populate with the subcategory that correspond to that category stored in column 2. once that is chosen the thrid data validation should populate with the corresponding subcategory from column three etc.. This is a small sample of the data in the columns.
Move Every Other Cell In A Column To Row Above It Then Delete Previous Row
Jul 11, 2014I have a spreadsheet that I need to rearrange to improve readability. I have an example attache, which is easier to understand than describing it, but I'll try:
I want to start in a1, move to a2
copy a2 to b1
delete line 2 (the previous lrow 3 now becomes row 2
if a2 > 0.01, skip it and
move & select cell a3
... and repeat the above logic, on the next series of cells...
E.g.
copy a3 to b2
delete line 3 (the previous lrow 4 now becomes row 3
if a3 > 0.01, skip it and
move & select cell a4
...and repeat the sequence again.
Create Macro That Filter Date In A Column From One Week Previous Till Current Date
Mar 14, 2014I have an excel sheet wherin there is a column that has the data where in the dates are displayed and many other columns.
I get this excel every Thursday so i want to filter this date column in such a way that it give me the data related to the date of the previous week only yet there is a catch here. When i say previous week i mean.
Suppose today is 03/14/14 then i want the data from 03/07/14 till today ie Last week friday to this week full( so cant use Current week option) and then paste it in a new sheet.
I tried the Record part but in that it is taking a hard coded value as i am selecting the date myself. I dont want to change the date manually every time.
this was the macro that was created
Code:
ActiveSheet.Range("$A$1:$BX$58").AutoFilter Field:=1, Operator:= _
xlFilterValues, Criteria2:=Array(1, "3/10/2014")
Range("A59").Select
ActiveCell.FormulaR1C1 = "=COUNT(R[-4]C:R[-1]C)"
Range("A60").Select
Find Last Previous Non Blank Value And Summarize Previous 6 Months?
Dec 10, 2012see attached file. Need to find latest non blank value - in attached file it is highlighted in yellow. From there, want to summarise 26 weeks back so, in the attached file:
Row 2 would be finding 750 and summarised back 26 weeks from 30 sep 2012
Row 3 would be finding 2250 and summarised back 26 weeks from 2 dec 2012
Row 4 would be finding 5000 and summarised back 26 weeks from 4 nov 2012
How To Remove Ws Create/delete Residue From A Wb
May 28, 2008My first VBA project continues, and what I thought would be a short-term diversion is becoming a career.
I have a couple of places where a worksheet needs to be built from scratch. I thought I was being a good programmer by deleting the sheet and creating a fresh new one each time (Worksheet.Delete and Worksheets.Add). Not.
I just happened to run across a post that referred to "residue" that's left in the workbook when you delete a worksheet. Thanks, mikerickson. I noticed the workbook size increasing, and it seemed to be increasing too much for the code and controls that I was adding as I developed this thing, but then that's Microsoft for ya.
My workbook is now at 400KB and I don't even have much data in it yet. If it exceeds 500KB, I have to upgrade a free Web hosting account to a paid account (max file size is 500KB for the free account).
Therefore, in addition to wanting to be a good programmer, and wanting to save disk space, bandwidth, and download time, I also have a financial interest in removing all that "residue". Emptying my recycle bin, you might say, except that I can't recycle this particular trash. That's now #1 on my to-do list.
Create Delete Checkbox For Each Data Row
Jun 10, 2007I currently have a macro which will copy a row of data from one sheet and paste it into the first blank row on another sheet "Invoices".
Now I want to write some code that will insert a checkbox to the left of each new row of data, (presumably in column A). I'm getting confused because I have never worked with checkboxes before and when I search the net for info. I'm getting some hits on Userforms (which I don't want), others on ActiveX controls and still others on form controls (what I think I need).
Here is some more info on what I'll be doing with them:
I am writing a second macro to see which boxes are checked. For any checked boxes I want the respective data to be sent to a mail merge and then the entire row, data and checkbox, to be deleted.
This adds a minor complication because if I delete a row, then all rows and checkboxes below it will need to move up. Is this something that will happen naturally or do I need to create some special code to handle that.
The final complication is that the data is data is going to sorted sometime between the creation of the checkbox and its later deletion. I'm wondering whether its necessary to keep a checkbox associated with a particular row, or if I can just tell the checkbox to figure out which row it exists at.
So, to sum up. I need to:
First - Learn how to create a checkbox
Second - Scan through all existing checkboxes and see which ones are checked
Third - Delete rows and sort the data while maintaining one checkbox for each row of data.
Modules In VBA
Feb 26, 2009Can i know how many modules can be used in a VBA Program
View 9 Replies View RelatedCreate Userform Which Can Add Or Delete Master Data
May 11, 2009I am making planning & status board for each project(yard). But in my 1st Stage I am having a problem for creation of Userform & List Box for my Display Sheet.
Problem-1) I want to create userform which can Add or Delete my MasterData.
Problem-2) I want to display & change Block Status of Yard in List View. Yard No will be selected using combo box.
List View Should allow addition & Deletion of record.
Note: I am a bit new user for VBA but can copy codes from sample file to use in the files.
Class Modules?
Oct 14, 2008I'm wondering about class modules and what they can be used for etc etc? i want to continue developing my VBA and feel that this area is the next step?
View 2 Replies View RelatedIgnoring 1 Of Two Modules
Jan 28, 2010I have managed to get it almost done with lots of help from here the last issue I have is this:
The module I want transferred is working the assigning of the macro within that module to the button is working, however, when it gets to the FillSalesSheet section it opens the said workbook but then jumps to the module and the FillSalesSheet in that.
Module 1 which I would like ignored on the newly formed workbooks looks like this: ...
Removing Modules
Nov 16, 2006It seems like I am asking a question at least once a day. I searched the net and forums and could not find an answer to this question. Thanks to everyone for the help I am making a lot of progress because all of you. Basically, I have a read-only workbook which the user gets a prompt to save as a new workbook for editing purposes. I have a autorun macro so now when the user opens their workbook, it contains my autorun macro. I do not want this. Is there a way to remove modules so that the users copy has no macro information?
View 9 Replies View RelatedOn Open Run Two Modules
Apr 16, 2008I have two modules I wish to run when I open a workbook. The reason I have them as modules is they are required to be run manually, also.
Is it possible for me to set a Workbook_Open() sub that will run these two modules?
The modules names are Module1 and Module2.
The modules stipulate what sheets etc they have to act on, I only need the modules to be initiated.
Web Queries In Modules
Aug 8, 2006I'm trying to produce a spreadsheet that pulls infomation from different web pages throughout the day. It needs to pull quite a large amount of information from different web pages hence I wanted to produce a subroutine which could be called with different variables for each web page, i.e. url, field, destination, etc.
To actually produce the query I recorded a macro and then used the code it produced. I then changed the URL to url, a string variable which holds the urls of the pages. The destion address was changed to destination, a range variable to store the destionation location, and the webTable was changed to table also a string variable to store the table number. This is shown below.
With ActiveSheet.QueryTables.Add(Connection:= _
url, Destination:= destination)
.Name = "q?s=%5EFTSE&m=L_137"
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = False
.BackgroundQuery = True
.RefreshStyle = xlInsertDeleteCells
.SavePassword = False
.SaveData = True
.AdjustColumnWidth = True.............................
Export All Modules
Feb 11, 2008I had a search and look around, but couldn't find any information on how to quickly (automatedly) export all the modules in a workbook to text files.
View 3 Replies View RelatedHow To Create Macros Buttons To Add Or Delete Columns And Rows
May 21, 2014So I'm trying my hand at creating VBA buttons and functions that do the following.
Button 1 :
to add a column with every click. The button will create one extra column. So by design there will be at least 1 column. Example if the button is clicked twice it will create 3 columns. I just need a buffer col. (contains no data)
Button 2 :
to delete empty columns leaving only one empty buffer column. That is this button will purge empty columns except the buffer column. OR if ALL the columns are filled, Button2 will create the buffer column.
Eg. I click Button 1 three times. It creates four columns. I only fill two columns. When Button 2 is clicked it will delete all the empty colums except the buffer column. OR I fill in all four columns, there is no buffer column, when I click Button2 it will insert the buffer col.
Button 3 :
to add a row with every click. The button will create one extra row. So by design there will be at least 1 row. Example if the button is clicked twice it will create 3 rows. I just need a buffer row. (contains no data)
Button 4 :
to delete empty row leaving only one empty buffer row. That is this button will purge empty row except the buffer row. OR if ALL the columns are filled, Button4 will create the buffer column.
Eg. I click Button 3 three times. It creates four rows. I only fill two rows. When Button 4 is clicked it will delete all the empty rows except the buffer rows. OR I fill in all four rows, there is no buffer rows, when I click Button4 it will insert the buffer row.
In the sample file there are six columns filled with data. The 7th col is empty(the buffer column). The column after that calculates the average of data in filled columns. There are eight rows with data and the ninth row is the empty buffer row.
The "add" buttons must be able copy the format/formula of the column/rows BEFORE the buffer colums/rows and insert it before the buffer column/row.
Keeping Last Row Variable Across Modules?
Jun 11, 2014I'm trying to make it so that a lastrow I defined in one module will still be defined in another macro.
My background for this - my macro is too large for one module, therefore, I split it in two. However, the new module uses defined variables (multiple lastrow definitions) from the original module.
So, is there a way to make it so when I originally define a lastrow in one module, other modules will recognize it?
Call Modules From Array?
Sep 14, 2012I have a number of modules that I want to call is it possible to call them from an array
For example
myarray = Array("Outstanding_Per_Agent", "Unique_Records")
Call myarray
This doesn't work as it says it expects a sub function or property
Do I need to define "myarray" as something or is it even possible.
How To Dim A Response (from Input Box) Throughout Different Modules
Jan 21, 2014I'm working with a substantial amount of code (which, due to its size, has been spread out into different modules). Whenever I transition from one module to the other, I have placed a msg at the beginning of each module to prompt the user to simply insert an integer to signify which version of the automation that is run. The following is an excerpt of a sample msg
[CODE]
Dim Msg, Title As String
Dim MyInput As Integer
' Define message."
[Code].....
Where, whatever report is being run, will be the same throughout all of the modules (for example, if you run the "Day" Report" at the beginning, the rest of the automation should be run using the "Day Report" code, not the "Night Report").
Is there a way to do one of the following
1. Label the input of "Day Report" or "Night Report" at the beginning of the automation (where the above except of code is how that would be done), and that can then be the determinant through the rest of the modules
2. Set my code in a specific module to, when it completes, automatically go to the same style of report (Day or Night) in the next module.
Running Modules Together On Same Worksheet
May 25, 2014Can you run 2 modules at the same time on the same worksheet.
View 2 Replies View RelatedVba: Difference Between Sheet And Modules
Aug 12, 2008If I put:
Sub t1()
Worksheets("sheet1").Cells(1, 1).Value = "abc"
End Sub
on sheet1, it works. But if I put it on module1, then it does not work. What do I miss here?
Pass Variable Between Modules
Dec 11, 2009I created the following sub to signal when a macro in Module 1 is complete:
Public Sub Done()
Dim complete As Boolean
complete = True
End Sub
I placed this just before the end sub in the macro for which I am trying to detect that it has finished executing:
Call Done
End Sub
In the Sheet 1 Module, the code fails at the statement:
If complete = True Then
The error returned is "Variable not defined." All three subs are declared as Public. Why does the Sheet1 sub not recognize the variable "complete" from the Module 1 macro?