I have a column of references I wish to standardize. Contained within a general text description there is also an order-specific reference number, which is not relevant for my purposes. I wish to find all of these numbers and replace them with nothing (i.e. retain the rest of the description).
The reference numbers are always in the format "P#####/##". Unfortunately these references are in the middle of the text field, not at the start or end, so I can't use a LEFT or RIGHT formula to delete them.
Once these reference numbers have been deleted I will then be able to filter for unique records only. When I do this at the moment the filtering has no effect due to these specific reference numbers.
For example this function is as follows: =IF(OR(AND(X1=4674,Q1="YES"),AND(X1=5400,Q2="YES". I wanna replace every "YES" in the worksheet with the letter Y for example.
i want to replace the letter A,B,C,D,E, with numbers from 1-5. When I take of the """" and replace the letter with the numbers the formula does not work.
Column A has cells showing either Y or N I want Column B to take a Y and convert it to a Yes and N to No. I tried an IF statement but it wont seem to work.
I want to replace all numbers in the worksheet which are greater than 200 with 200. I mean all numbers greater than 200 should be set to 200. values are not all in the same column or same row, they are spread throughout the worksheet. I tried using the Find and Replace, but it can replace only a specified value with only another specified value. I want to use some kind of a filter which will choose all numbers greater than 200, and make them 200.
I have a workbook with a bunch of sheets and I am interested in the sheets that begin with the letter "P". Each of these sheets is named "P###" with #s ranging from 0-9 and not consecutively.
On each of these sheets, the various formulas link to the cell O37. I would like to replace the value in cell O37 with the name of the sheet "P###" for all sheets that begin with P.
This problem has come up fairly frequently lately, and I'm not sure how to fix it, or if this is by design...but in Excel 2003 I can't seem to do a "Find and Replace" based on the value of a cell. I can do a find, based on cell value, but the moment I change to the replace tab, the "values" and "comments" are missing from the "look in" dropdown.
I've only noticed this when I'm trying to replace on a filtered list, so I'm not sure if that is part of the issue.
Perhaps an alternative way of arriving at the same goal. Basically I have a worksheet with a number of filtered columns. They are filtered just right, using custom filtering, and so I do not want to undo the filters. In some columns I have formulas that are returning #VALUE! errors. I'd like to replace all of these cells with NA.
I recently became owner of a spreadsheet with some issues, and I am trying to make it useful. Each row has a URL of a blog post, and I want to extract the date from it (which is present in each URL) while getting rid of the rest of the URL. I was able to get rid of everything up to the year (which comes first), but then the URL continues, for example, 2013/05/16/the-rest-of-the-url/ and I would like to just have 2013/05/16 remain.
I am trying to use find and replace with the find box reading 2013/??/??/*/ and replacing it with 2013/??/?? which effectively erases everything else in the url, but leaves ?? instead of the numbers. Is there any way to have it so that it keeps whatever was in the original box?
Trying to repeat a 550 or so character statement with a find/replace however I am getting type mismatch errors. When I use a smaller message in the "replace" it works.
I need it to post a message exactly as long as what I have in there. How do I get it to work?
Need assistance with the code for catching errors when using the find / replace function in excel? In particular, I am trying to write code to break to an error message when the value or string searched for isn't found in the find / replace. At the minute I have just copied the standard code using a macro and all this does is return a message box saying X entries replaced.
I am trying to create a macro where it finds a a certain word in a column for example C. What i want it to do is find anything that says FWD_EUR and then replace that cell (e.g C2) with CASH_EUR_FWD and after it has done that it replaces the adjacent cell (e.g. D2) with EUR_FWD. I then want this to do the same with FWD_USD to CASH_USD_FWD and adjacent cell to USD_FWD.
Range B3:B1000 is text strings. Column C2:C50 is a list of words that I would like to "Find" in Column B and replace with it's lowercase values unless they start off the string.
Example
Find all occurences of And or AND and replace with and Find all occurences of With or WITH and replace with with. Find all occurences of Or or OR and replace with or
I have letter and number combination code in two collumns and they differ for 10.000 numbers:
BAM98314 BAM88314 BAM90000 BAM80000
As you can see the left code is for 10000 numbers higher. the letters are allways the same. In the event that this isn't so, if difference between codes in same row is more or less than 10000 numbers. I was thinking on making conditional formating so the cells with wrong difference would be marked red, but I do not know how to make formula for this difference.
How to translate a specific number into a specific letter related to the number itself.
I have lots of different numbers for example all going down a specific cell (These numbers I want to separate into 3 different catagories. The positive numbers I want to be calculated as the same Letter that is next to that row directly over to the left of that cell.
So if the letter
B / cell / cell / +9 / Then I want if its a positive number like +9 to answer in the formula with the same letter (B) listed to the right in the same row in a different cell of course
B / cell / cell / -6 / Then I want if its any negative number like -6 to answer in the formula as the opposite Letter of (P) listed to the right in the same row in a different cell of course
P / cell / cell / +17 / Then I want if its a positive number like +17 to answer in the formula as the same letter (P) listed to the right in the same row in a different cell of course
P / cell / cell / -3 / Then I want if its a negative number like -3 to answer in the formula as the opposite Letter of (B) listed to the right in the same row in a different cell of course
and thirdly if its a (0) zero and only (zero's) Then I want the answer to stay (0) zero.
The number can be any numbers it doesn't matter. Only distinction is that positive number of +1 and up repeat and stay the same letter that the cell on the far left is already stated.
and all the negative number of -1 amd below all reverse the letter to the opposite letter of (B to a P) or (P to a B) listed to the right in the same row in a different cell of course
and of course (0) zero would be listed as a positive number and only return a (0) zero as the result of the formula.
How to create a formula in cell M2 that looks at the second row of numbers (0 and 500s) and tells me the rightmost value that is greater than zero. In this example it would return 12.
Second Question: Is there a way to return any counted value, for example the second-to-last number that is over 0?
I'm trying to write a macro where I match specific letters from one cell, with a column in another sheet so I can copy/paste adjacent cells. As an example I have a list of part numbers in column A of my Document1:
ex. C12932-1 C13226-2
I want to be able to find the corresponding part number in column A in Document2: ex. C-12932 C-13226
However the proplem is clearly that the part numbers are written differently. So I need to just search for "12932" or "13226"
I have a value in E12, and i need a formula that looks at the value and if it is equal to or greater than 5, then the output should be E12 x 500 +1000, but if the value in E12 is greater than 5, then the output needs to add the original 5 x $500 and now include all greater than 5 to be x by $250 + 1000. I got this far, but if the value is greater than 5, i don't get the original 5 * 500 that i also need.
My data has a bunch of near 0 figures followed by values I actually need followed by more irrelevant 0's than once again followed by values I need and again irrelevant 0's. Looks like
0.1 0.12 3.2 3.4 0.1 0.3 4.5 4.2 0.3 0.11
but with many more rows and numbers. I'm graphing the start and end values before/after zero's.
The first block of numbers I figured out using
=MATCH(TRUE,INDEX($C8:$C150>1,0),0)+7 I then index from that given row.
The span of relevant values I'm looking for constantly changes, so once my numbers deviate too much I stop, using another index formula.
Now for finding my beginning and end points for the next block of data I've combined using VBA with excel formulas. I can't quite figure this part out. I've created Variables for ranges and then used them to find max and min Values.
Public Sub RunCurrent() ' ' RunCurrent Macro Dim upEnd As Integer Dim dnStart As Integer Dim dnEnd As Integer
I have a spreadsheet that I need a formula so that when a number appears in one column, then automatically it will put text (only) in the adjacent column. I have attached the sample spreadsheet for review. What I need is if there is a number in column A then, put a " / " (forward slash) in column B. If there is only a 0.00 in column A, then put nothing in column B. I tried the IF function an it errored out stating that the " / " was not a number.
