How To Translate Number Into Specific Letter Related To Number
Feb 3, 2014
How to translate a specific number into a specific letter related to the number itself.
I have lots of different numbers for example all going down a specific cell (These numbers I want to separate into 3 different catagories. The positive numbers I want to be calculated as the same Letter that is next to that row directly over to the left of that cell.
So if the letter
B / cell / cell / +9 / Then I want if its a positive number like +9 to answer in the formula with the same letter (B) listed to the right in the same row in a different cell of course
B / cell / cell / -6 / Then I want if its any negative number like -6 to answer in the formula as the opposite Letter of (P) listed to the right in the same row in a different cell of course
P / cell / cell / +17 / Then I want if its a positive number like +17 to answer in the formula as the same letter (P) listed to the right in the same row in a different cell of course
P / cell / cell / -3 / Then I want if its a negative number like -3 to answer in the formula as the opposite Letter of (B) listed to the right in the same row in a different cell of course
and thirdly if its a (0) zero and only (zero's) Then I want the answer to stay (0) zero.
The number can be any numbers it doesn't matter. Only distinction is that positive number of +1 and up repeat and stay the same letter that the cell on the far left is already stated.
and all the negative number of -1 amd below all reverse the letter to the opposite letter of (B to a P) or (P to a B) listed to the right in the same row in a different cell of course
and of course (0) zero would be listed as a positive number and only return a (0) zero as the result of the formula.
View 9 Replies
ADVERTISEMENT
Jul 11, 2009
I want to apply Data Validation to a cell, so that only the following combination of letters and numbers can be entered.
Letter Letter Number Number Number Number Number Number Letter.
e.g AB123456C.
View 14 Replies
View Related
Jul 9, 2008
I have a column of references I wish to standardize. Contained within a general text description there is also an order-specific reference number, which is not relevant for my purposes. I wish to find all of these numbers and replace them with nothing (i.e. retain the rest of the description).
The reference numbers are always in the format "P#####/##". Unfortunately these references are in the middle of the text field, not at the start or end, so I can't use a LEFT or RIGHT formula to delete them.
Once these reference numbers have been deleted I will then be able to filter for unique records only. When I do this at the moment the filtering has no effect due to these specific reference numbers.
View 9 Replies
View Related
Apr 3, 2014
I'm trying to write an IF formula that will return a number if the word in the adjacent cell begins with a specific letter. Here's what I want to show:
City
01
Express
02
Overnight
03
So "C" would return 01, "E" would return 02 and "O" would return 03.
View 3 Replies
View Related
Jun 15, 2009
I have some delivery ratings from suppliers, and I want to assign a specific letter to each rating, depending of the obtained number. Criteria is:.........
View 4 Replies
View Related
Apr 9, 2009
I have 3 columns of data, column C has a number representing a length of time in months. I need to add a number to the end of each row (Column D), depending on the number in column C. Example:
If column C has a number between 0 and 3, the number to go in D would be 1. If column C has a number between 4 and 6, the number to go in D would be 2. Here are the list of possiblities (only 5):
0-3 = 1
4-6 = 2
7-9 = 3
10-12 = 4
12+ = 5
This will form part of a macro, so a VBA solution would be ideal. I thought of having a named range and looking up each row with a list of all possiblities. But i see that as rather crude. I'm hoping someone has a more logical solution they could share.
View 2 Replies
View Related
Nov 5, 2013
I would like to change a number to a letter and then drop a digit from the end.
Say my data in A1 reads 81234568, and I would like it to display in cell A2 as h123456.
View 3 Replies
View Related
Dec 9, 2009
I've developed a spreadsheet in Excel 2000 where one of the cells contains the number of months a quantity will last, calculated by taking the total amount and dividing it by the amount used each month (a constant).
I would like to have another cell where that number is translated into the future date that number of months represents, so that in addition to seeing how many months the total amount will last, one can see when the amount will be depleted.
For example, suppose it is December 9, 2009 (as it is now) and the number in the number-of-months cell is 6. Then, is there a way that when 6 is calculated, in another cell appears something like June 9 2010 or 6/9/2010 or 6/9/10 (assuming the computer's clock is correct)?
It would be nice if the formula would handle decimals too, such as the date for 6.4 months, but that's not essential.
View 9 Replies
View Related
Dec 21, 2012
I have letter and number combination code in two collumns and they differ for 10.000 numbers:
BAM98314
BAM88314
BAM90000
BAM80000
As you can see the left code is for 10000 numbers higher. the letters are allways the same. In the event that this isn't so, if difference between codes in same row is more or less than 10000 numbers. I was thinking on making conditional formating so the cells with wrong difference would be marked red, but I do not know how to make formula for this difference.
View 2 Replies
View Related
May 15, 2014
I have data one sheet which is
Date Ref No Type %complete
Monday 1 Erect 75
Monday 2 Erect 50
Tuesday 1 Erect 95
Wednesday 1 Erect 100
On the next tab I am consolidating all the reference numbers and want to capture the latest % complete
I have been trying =Max(if ref no=1 and type = Erect, % complete),1
But when I try it for reference number 2, it just says 100% aswell, when that should be 50%.
View 1 Replies
View Related
Nov 26, 2008
The database is for a Prison, and an obvious item to search for on a userform is Prison number. I have a serach option that generates an array listing in a listbox, selecting that item then populates the userform - no problem.
The problem occurs when an individual has more than once instance that has been recorded, is it possible to have more than one row generated in a listbox that can be selected, I only want indiviudal rows selected. The coding I am using for one of the single instance listbox is etc etc etc has been used to demonstrate that the coding continues to the length of the array requied
Private Sub FindAll()
Dim FirstAddress As String
Dim strFind As String 'what to find
Dim rSearch As Range 'range to search
Dim fndA, fndB, fndC, fndD, fndE, 'etc etc etc' As String
Dim i As Integer
i = 1
Set rSearch = Sheet1.Range("ChargeNo.")
strFind = Me.CbAdjFind.Value 'find Charge No
With rSearch
Set c = .Find(strFind, LookIn:=xlValues)..............
View 4 Replies
View Related
Jan 8, 2014
I am working on a concrete pour summary, I would like to have the specific codes on each tab be affected from one summary page. So when I enter a certain number on sheet 1 , it will affect that same number section that is on a different sheet. It will be adding a certain amount to that code section every time its entered. What functions need to be used to make this work..?
View 6 Replies
View Related
Feb 12, 2009
I wrote an excel program in Excel'03 for a dental office to manage state assistance patients and one of the table columns is the state assistance number. The problem is that the program defaults to a number format when it is entered instead of a text format, which is what I want. The issue is that state assistance numbers are always 8 digits and when it defaults to a number field the program drops the required preceeding zeros.
For example the number 00123456 will sometimes show up as 123456, which is wrong. It's like sometimes it will show up right and other times it gets a butterfly in its brain and deletes those zeros irritating the receptionist here. So, how do I get the table to either stay in text format or set up a number format that keeps the preceeding zeros?
View 3 Replies
View Related
Jan 8, 2014
I am working on a concrete pour summary, I would like to have the specific codes on each tab be affected from one summary page. So when I enter a certain number on sheet 1 , it will affect that same number section that is on a different sheet. It will be adding a certain amount to that code section every time its entered. What functions need to be used to make this work..?
View 3 Replies
View Related
Aug 14, 2014
Please see attached the Workbook. I need to check the policy Numbers in Column A to be present in Access Table. If yes then write the corresponding ScanDate and BatchNo in columns I and J.
Sun Project.xls
View 13 Replies
View Related
Jun 3, 2014
I have attached an example. If I have a set of numbers such as the one attached, is it possible to create a formula that will show me all the combinations of numbers that add up to 55.52? In the attached I have highlighted in different colours all the number combinations that add up to 55.52. The numbers highlighted in blue appear within more then one combination. Is there a formula that can do this for me, instead of randomly adding numbers hoping they add up to 55.52.
View 1 Replies
View Related
Jun 4, 2014
I have attached an example. If I have a set of numbers such as the one attached, is it possible to create a formula that will show me all the combinations of numbers that add up to 55.52? In the attached I have highlighted in different colours all the number combinations that add up to 55.52. The numbers highlighted in blue appear within more then one combination. Is there a formula that can do this for me, instead of randomly adding numbers hoping they add up to 55.52.
examples.xlsx
View 1 Replies
View Related
Mar 10, 2014
I would like to create a vba script when ran an input.box comes up and asks you to "enter number you want to start numbering from" and when the number is entered in the input box. e.g "7654", excel starts numbering each cell in column A from 7654 until there is an empty cell in column B.
View 7 Replies
View Related
Jun 7, 2009
Is there any way to name cells with same letter but different number?
e.g i need to name the first row A1 to A100.
View 8 Replies
View Related
Dec 11, 2012
I need to make a series of numbers and letter auto fill in a spread sheet
Example
2650A
2650B
2650C
And so on.
View 3 Replies
View Related
Aug 14, 2013
I have a table like this.........
Item Code
Ice A
Ice A
Ice B
water D
water A
water C
water A
milk B
milk D
milk C
milk C
milk C
milk B
And I would like to count the number of each letter to look like........
_______ A B C D
Ice ___ 2 1 0 0
water _ 2 0 1 1
milk ___0 2 3 1
View 2 Replies
View Related
Jul 23, 2009
Is there simple function that anyone knows of (or has written) that will convert a letter to its alpha-numeric equivalent?
For instance, A = 1, B = 2, AA = 27, etc (a = 1, b = 2, aa = 27)
View 6 Replies
View Related
Dec 19, 2011
I have records combined with letter in column A: number is always on left and letter always on right, such as 456UI, 4689746COMPREH. How can split the combination into number in column B and letter in column C?
View 2 Replies
View Related
May 4, 2012
I made a calendar, and I need a letter next to the daynumber. How could I put a letter next to the number? The problem is that I have a formula for the daynumbers, how could I add the letter?
View 9 Replies
View Related
Sep 7, 2013
I'm trying to add plus 1 to a cell from another cell but it doesn't work because the number starts with a letter. I do want to keep the letter in there for a reason so removing the letter to make it work is not what I want.
Example:
Code:
ThisWorkbook.Sheets("Invoice").Range("H5").Value = ActiveCell.Value + 1
Is it that I need to declare and set the ActiveCell value as a string or something?
View 2 Replies
View Related
Dec 13, 2013
The following displays a name and number as the Chart title with VBA...how do I change the code so that is it name plus letter...instead of being Group 1 , Group 2 etc..etc.. it will be Group A , Group B etc..
Code:
.ChartTitle.Text = "Group " & lng + 1
View 3 Replies
View Related
Nov 13, 2006
Is there a way to get the column Letter, instead of Number?
like in A1 Column() would equal 1 in B1 Column() would equal 2
I would like
in A1 Column() to equal A and in B1 Column() to equal B
View 9 Replies
View Related
Oct 14, 2008
I have a list of names and I need to know how many names are greater than 6 characters in length. What is the formula I need to enter?
View 9 Replies
View Related
Jul 26, 2006
is there a way to make the following code return the letter of the column instead of the number? currently if the 'String' value that is in 'ColumnFind' is in column B this code returns a value of 2. i Need the 'B' for later code to work.
ColumnLetter = ColumnFind.Column
View 5 Replies
View Related
May 26, 2007
I need to figure out the number of occurrance of a letter in a word written in a cell. For Example i am writing "pattern" in a Excel cell. I want to know the marco/vba code that will give me the number of occurrance of each letter. The output should be:
p=1
a=1
t=2
e=1
r=1
n=1
View 8 Replies
View Related
