I want to replace all numbers in the worksheet which are greater than 200 with 200. I mean all numbers greater than 200 should be set to 200. values are not all in the same column or same row, they are spread throughout the worksheet. I tried using the Find and Replace, but it can replace only a specified value with only another specified value. I want to use some kind of a filter which will choose all numbers greater than 200, and make them 200.
This problem has come up fairly frequently lately, and I'm not sure how to fix it, or if this is by design...but in Excel 2003 I can't seem to do a "Find and Replace" based on the value of a cell. I can do a find, based on cell value, but the moment I change to the replace tab, the "values" and "comments" are missing from the "look in" dropdown.
I've only noticed this when I'm trying to replace on a filtered list, so I'm not sure if that is part of the issue.
Perhaps an alternative way of arriving at the same goal. Basically I have a worksheet with a number of filtered columns. They are filtered just right, using custom filtering, and so I do not want to undo the filters. In some columns I have formulas that are returning #VALUE! errors. I'd like to replace all of these cells with NA.
I have values in row A and I have values in row C. I want to create a loop to look up xxx and replace it with the values consecutively in row C. Look at example for a better Idea. I found a way to find and replace, but I not sure how to use it with qoutes. I was thinking maybe I dont even need row A and just supply a list and excel could have the chunk of data in the code itself.
In columns A and B, I have a list of time values. Format: [h]:mm:ss. Column C is B-A. Last row of Column C is the sum of all time values of column C. Sometimes A>B, or either A or B is blank. In such casescorresponding C value becomes ##### (negative date and time) And hence sum of all C values which is in last row of C becomes ####.
I have set of data in multiple range ,need to fill the and replace the old values depends upon two column values (AH & AL)
IF Active Calls is "TATA" In AH:AH, and IF Action Onwer Col is "Blank",in AL:AL Then Fill the Blank cells by Values "SVC" in the col Action Owner,Then Replace Old values by "Updates Awaited" in Status Col(AM:AM)
Find the attachment & basic code take this code for this task
I want to look to a range and if there is a value greater than zero I want to count it. I keep going round in circles trying to do this and now I give up.
Members in our club enter competitions each month and receive scores. I want to be able to average the top five scores from the last ten competitions each member entered, keeping in mind that not all members enter all competitions and will score 0 in this situation.
Its easy if members enter every competition, but I want a formula that will work also for when members may only enter 10 of the last say 15 competitions and I still need to find the average of the top 5 scores.
Member Name is in A1, and then scores are in A2-A25.
I have a column of values. If a row's value is greater than 0, I want to count it as a value of 100 and add the result. I can get this far: =SUMIF(H11:H12,">0")
...but I don't understand what would come next. What I am trying to do is to use the above formula to total the actual sum of an array and then to also create a second column which assigns a maximum value total based on each row's non-zero result being worth up to 100. Using the above formula as a reference again, the formula that I am seeking would return a total value of 200 if both H11 and H12 contained any value greater than 0. I plan to use these two results then to calc a percentage.
My question is how do I write the formula so that it looks up a radius of 3500 by looking up a value slightly smaller than 3500, in this case 3440 and return the value of 4.4
I have 2 sheets, i need to transfer every cell value criteria >0 from sheet2 to sheet1. See the code below
Sub datatransfer() Dim rngqty As Range Dim nextcell As Range Set nextcell = Sheet1.Cells(Sheet1.Rows.Count, 1).End(xlUp).Offset(1, 0) Sheets("Reqorder").Activate For Each rngqty In Sheets("Reqorder").Range("c4", "n57") Do While rngqty>0 Cells(rngqty.Row, 1).Copy nextcell.PasteSpecial (xlPasteValues) Cells(1, rngqty.Column).Copy nextcell.Offset(0, 1).PasteSpecial (xlPasteValues) rngqty.Copy nextcell.Offset(0, 2).PasteSpecial (xlPasteValues) Loop Next rngqty End Sub
I am trying to replace a range of cells with certain values but I can not figure it out. I'm almost there I think but don't know how to get the varying values I'm looking for. So I have a column (AJ in this instance) that has a bunch of "xx" values at different spots within the column. I want to replace those xx values with numbers 01 through 36. What I have below gets me just about there but it replaces every xx value with 01. How do I get it to go 01 on the first one, 02 on the second one, etc?
/code Dim cell As Range For Each cell In Range("AJ1", Cells(Rows.Count, "AJ").End(xlUp)) If cell.Value = "xx" Then _ cell.Value = "01" Next cell /code
I am creating a spreadsheet that allocates hours to different categories of work - for example, "Fire Protection". I need the allocated hours for all of the different Fire Protection duties to only show up when a value greater than zero is entered in the column at the top of this category entitled "Fire Protection". If "Fire Protection" has a value of zero, then all fire protection-related duties will automatically be zero as well - in effect, this category of hours is nullified.
I want to divide the numbers from 2 cells, down a long column. Let's further say that in some instances there aren't any numbers in either of the cells. You get a divide by zero error.
So you have values in a1 and b1 through a10 and b10. You want to divide the value in the a column by the value in the b column and return the answer in the adjacent c column. You've copied the formula all the way down to c20.
All the cells from c11 to c20 will have divide by zero errors.
What is the syntax to check if both cells in columns a and b are greater than zero so that either an answer will be returned or just a blank cell will result, (when nothing is in one of the cells from a or b?
The following formula works for checking the status of cell A, how do I also check the value in cell B? =(IF(A5>0,A5/B5,""))
I have two columns A and B. I need a count of how many times a value in B is greater than the same row in A. I don't want to insert a new column (e.g. for if statements to add up).
Can I insert a countif at the top to do that? I tried various countif variations but could not find the right one. Additionally any other option that does not involve adding new columns/rows.
How can I extract the unique values from the original list but only those whose their SUMIFS is greater than zero? in my example "Blue" , "Yellow" & "Red" should not be extracted.
I've two columns in an excel sheet... In column A, I have years & in column B, I've amounts... Now I have made pivot table for the same to have an exact picture of this table... Now, I need a formula applying on pivot table that may identify the amounts in specific years great that 50,000 then great that 50,001 to 100,000 then 100,001 to 150,000....
I have a spreadsheet that contains dates in column A and numbers in column B. For some dates I do not have data available but I must include all of the dates, so a date with no data available has a 0 in column B. I need to come up with a way to average the total of my data with the total number of weeks with data (ones without a 0) that will recalculate everytime I add new data. How do I write a function that will check column B for a number greater than 0 and then based on that result either count or ignore column A, and then total the number of times A is counted?
I am trying to build a report based on data in a separate worksheet. The report must only show the name of the value and qty associated with it only if the qty is greater than 0.
As an example, the values can be colors.
Column A = Names of Colors: Red, Blue, Green, Yellow, Black Column B = Qty of each Color: 5,4,0,1,0
The report is held on a separate spreadsheet. I would like to only show the values that have qty's greater than 0, not any values that have a value of 0.
In the file I have attached, this code works great taking information that has a value greater than zero from Sheet2 and putting it onto Sheet3. I tried to use this code to take information from Sheet1 from different cells than Sheet2 and also put it onto Sheet3, but I can not get the code to do anything.
I am working on a Golf League score sheet, and each week there may be a different amount of players that play. I have a weekly worksheet (attached) that contains the full list of golfers that had played that week and I only want to sort the columns for those golfers who have a score greater than 0 (this would be the ones who played that week). You can see that in week 1 I had more players than in week 2. So in my weekly worksheet I sort these sub grids by Score first. However I ONLY want to sort the rows that have a score greater than 0. Can this be done in VBA or am I stuck doing this manually every week?
How can I use COUNTIF to count the values in a range which are greater than 0?
I put =COUNTIF(B2:B100000)>0 but that didn't work?
(I'm using XL 2007 hence the range greater than 65000 rows. But I don't think COUNTIFs syntax has been changed in 2007 so I assume I'm having a brain fart.)
I have a problem which is beyond my capabilities. I need excel to sum amount column (See example table below) by unique values in company column then conditionally sum those values based on the year of investment, stage of company and finally, the kicker, the summed Amount by unique companies value has to be less than a certain threshold.
For example, I want companies in Stage Column of Exit only and in year 2004 only BUT only if the sum of the Amounts by unique company values is less than 100. So in the example table this would return 0. I have code and criteria written to sum unique values based on similar criteria such as sum if company Stage is Seed and Year is 2004 but for the life of me I can't seem to make the jump further.
For Unique values I used this function: =SUMPRODUCT(($B$2:$B2=Year04)*($D$2:$D2=StageS)*($A$2:$A2=$A2))=1 Then: =DCOUNTA($A$1:$D9999,2, Criteria) or =DSUM($A$1:$D9999,2, Criteria)
This along with criteria explained before returns the number of unique companies that are Stage=Seed and Year=2004 or sum of amounts with that criteria.
I am trying to adapt this technique to get what I want but to this point have been unsuccessful. My best guess is that I will need to create an array of the unique companies (New Sheet column A) with the Summed Amounts (New sheet column B) and then run functions again with the easier equations and criteria? I am trying to avoid combining company records as each investment needs to remain individual and there are 16000 records. Any help would be greatly appreciated.
Company Year Amount Stage XYZ 2004 10 Seed XYZ 2004 20 Seed ABC 2004 5 Early ABC 2004 25 Early DEV 2004 14 Later DEV 2004 19 Later TRU 2004 100 Exit TRU 2004 120 Exit TRU 2004 100 Exit
Below is what I currently have on my excel spreadsheet:
1. 2. Input Column 3 3. 0 No 4. 2 Yes_2 5. 0 NO 6. 0 NO 7. 0 NO 8. 2 YES_6 9. 0 NO 10. 1 YES_8 11. 0 NO
The spreadsheet starts by the user inputting numbers ONLY in column 1 (under input). The rest is done automatically by implementing equations. Column 2's equation is easy, if the value of column 1 is greater than 0, return YES_(row number). In addition, the maximum number of Yes's in column 2 is three (constraint).
My problem is that I need a 3rd column, consisting of only 3 rows that search for YES_1, YES_2, and YES_3. The 3rd column's equation is easy, I will simply use the Vlookup function for YES_1, Yes_2, and Yes_3. Therefore the PROBLEM IS: I need column 2 to output YES_1 (in row 4, from the example above), YES_2 (in row 8) ...etc. This would mean chaning the basic IF equation that I have which simply sees if the value in column 1 is greater than 0 then outputting "YES_the row number".
I have a yearly running log (attached). At the bottom in cell [B88] I would like to develop a formula that gives me the number of times I ran in that specific month. Dates are in Column A and running distances are in Column B. If a distance is zero, I don't want to count it. I have attempted to solve this using the =COUNTIFS formula, but I am not able to structure it properly. Maybe =COUNTIFS is not what I should be using.
