How To Get Chart Legend Back If Deleted
Apr 8, 2012So i deleted a chart legend - is there a way to get this back or do you have to start all over again?
View 4 Replies
ADVERTISEMENT
Add Chart Legend
Jul 30, 2007how can I add an legend entry that has been removed by error?
View 3 Replies View RelatedDynamic Chart Legend Using VBA?
Jun 28, 2005I am creating a chart where the number of data series used on the chart will change every time the code runs depending on what information people are looking for. That part works fine. I need a legend that shows which data series were added to the chart. Is there a way to get a dynamic legend on the chart that matches the data series, without manually adding it?
View 6 Replies View Related#Ref Error In Chart Legend
Dec 18, 2008I'm running Excel 2003 and I'm getting a #REF error in the legend of a chart! It displays the #REF and then the label. Anyone any idea what causes this - I can't find anything in Help.
View 2 Replies View RelatedStandard Legend In Chart
Jul 2, 2006I want to include a legend to a bubble chart in the folowing format: the smallest bubble in this legend should represent values between A and B, the second (somewhat bigger bubble) should represent values between B and C,and so on. Is it possible to produce a standard legend in a bubble chart?
View 2 Replies View RelatedDifferent Fonts In Chart Legend
Jan 15, 2007I have a chart graphing different series, which includes a legend to label each series. The labels are linked to particular cells in the worksheet.
Most of the chart has Arial font formatting, but I need to change the formatting of a few characters in the legend:
I know that i can change the formatting of the whole legend, and even different entries in the legend. Is it possible to change the font of just a couple of characters in one legend entry?
Elements I need to change are:
Font type (eg from arial to symbol)
Size (varying from 8 to 14)
Bolding etc.
Change Title In Legend On Chart?
Jul 31, 2014How do i change a title in legend on a chart. i.e. I want the label to be MGRS 2%
Job Category
Category %
EE Total
Mgrs
2%
15
Supvr
6%
51
[code]....
Chart - Only Show Legend Elements With Values?
Nov 22, 2013I have 10 graphs with more than 20 legend entries. However, each graph only needs 3-4 elements out of the 20 legend entries in the graph. Is there any way to force Excel to only show those legend entries that have a value? (without deleting them manually)
View 12 Replies View RelatedExcel 2010 :: Labels For Legend In Chart?
Dec 16, 2011I have a chart with 20 series labels that are series 1, series 2.... etc. I want to label them with 20 corresponding cells but can't find how to do this in Excel 2010 (I seem to remember this being easy to do in older versions). At the moment I am having to click on source data and edit each label individually... Is there a quicker way?
View 2 Replies View RelatedLegend Overlaps The Plot Area Of Chart
May 4, 2007I have charts that needs to be placed on specific position and have specific sizes on a chartsheet. I use chartobjects(i).plotarea (top, left, width, height) for that.
Unfortunately when I set these values they still change and get antoher value, there is some scaling going on in Excel and I do not know where that comes from. I have been looking on the internet and finally I found a piece of code which works, but still not good enough, because the legend is also not good positioned.
De data for resizing the charts (ChtNew), the legends and the charttitle I get from other charts (ChtOrig). The legend.legendposition of ChtOrig does not have a value but it still have a top,left,height en width which I use.
I show you my code, the part with the for-next is taken from the internet.
With ChtNew.legend
.Top = ChtOrig.Legend.Top
.Height = ChtOrig.Legend.Height
.Left = ChtOrig.Legend.Left
.Width = ChtOrig.Legend.Width '* 1.1
.Top = ChtOrig.Legend.Top + ChtOrig.ChartTitle.Top
End With
Change Order Of Chart Legend Freely
Sep 25, 2007see this example of a chart: see Image1.gif (the right thumbnail) as you can see 2 different types of graphs are combined: "lines with markers" and "clustered column".
in the legend one can see that the order inside the legend is clustered by the two types. within a type i can change the order easily (right click on a line or column - format data series - series order - up or down).
question: i would like to change the order freely. how to do this? for the order inside the legend i actually do not care at all, whether a representation of the data is a line or a column. i only want to make it as readable as possible. example what i'd like to get (made by handmodifing the picture with a drawing program): see Image3.gif (the left thumbnail)
Building Legend Of Chart Titles Linked To Charts
May 14, 2014I have a sheet with about 50-60 charts and I am hoping to have a master list of chart titles on the side, how can I link these titles with the charts themselves?
View 1 Replies View RelatedSeries Order In Legend, Multiple Chart Types
Aug 4, 2006I have a chart that combines 2 xy plots and a set of stacked columns ( total of 4 series).
I can adjust the series ordering between the 2 xy plots, and between the stacked columns, but not for all 4 at the same time.
I'd like the legend to show up as:
Series1, Series2, Series3, Series4
where 1 and 2 are the xy plots and 3 & 4 are the components of the stacked columns.
It is currently:
Series3, Series4, Series1, Series2
Any idea how to re-order the legend entries?
Chart Legend Text, Linked To Cell, Not Displaying
Jun 18, 2008Has anyone ever seen a problem like this? The Legend text is not displaying what is in the cell reference and I cannot figure out why.
View 9 Replies View RelatedSorting Chart Legend To Match Source Data Order
Feb 23, 2012The order of entries in my chart legend make no sense to me. Why is it not matching the order of the source data?
View 1 Replies View RelatedExcel 2010 :: Detecting When Chart Is Deleted
May 30, 2013I need to detect when some Chart is being deleted. This is part of an XL2010 VSTO addin I an developping. I could not find any event matching my need.
Did I miss some event somewhere? Would you know a (simple) method to detect when some Chart is being deleted by the user?
Macro Runs Fast When Rows Added / Deleted Slow When No Rows Added / Deleted
Jun 27, 2013We have created a macro that basically looks for rows that contain an "H" and hides the row if it does.
Users can add new rows throughtout the year to this spreadsheet. and based on certain criteria, an H or U will be placed in a hidden column which the macro looks at and hides any row it finds an H.
The user has to click on the button that has the macro assigned to it once they have finished working on the spreadsheet.
The problem we're finding is that for users who insert/delete rows, once they click the button it takes up to 15 seconds to run through macro (which is ok). However, users who haven't added or deleted any rows and who click the button, they have to wait upto 5 minutes (which isn't ok) for the macro ro run.
We can't figure out why the macro takes longer to run when no changes have been made?
Calculating Distances Between Back-to-back Locations
Aug 11, 2012I have a layout something like the following:
A1
A2
A3
[Code]....
Where each (i.e., A1) represents a location. I have tried to use a coordinate system but this will not work for the back-to-back locations. (Assuming each location is 2 feet wide, For example A1 to C1 is 4 feet apart, not 2 feet (as Euclidean or rectilinear would calculate it as).
Would there be a way to incorporate an if statement for those locations that are back-to-back? As a rectilinear distance calculation would work as long as the locations are not part of the same "block".
Ultimately I am looking to have a matrix which contains all the distances between each location:
A1
A2
A3
B1
[Code].....
Get Legend Along With The Result Of A Formula
Sep 30, 2008I'm working on an evaluating spreadsheet where I give for several items a rate of 1 to 3 and at the end it calculates an average rate. The average rate would range from 1 to 3 as well and their meaning is:
1 - poor
2 - average
3 - good
How can I work on the formula so when the result is equal 1, 2 or 3 it automatically gives in the cell right beside the related legend?
Legend To Go In Alphabetical Order,
Mar 2, 2009For Instance i might have a cell with the value 30KDPA
the one right below this needs to be 30KDPB
then 30KDPC
basically the last letter is going through the alphabetical order. Once it hits Z it should go to AA, AB, AC . Just like an excel file.
If i select the first cell and just drag it down it copies that exact same cell value.
Resizing Charts And Positioning Legend
May 4, 2007I have made charts in VBA charts that needs to be placed on specific position and have specific sizes on a chartsheet. I use plotarea (top, left, width, height) for that. Unfortunately when I set these values they keep chaning, there is some scaling going on in Excel and they won't get the specified size. I have been looking on the internet and finally I found a piece of code which works, but still not good enough, because the legend is also not good positioned
De data for resizing the new charts (ChtNew), the legends and the charttitle I get from other charts (ChtOrig). The legend.legendposition of ChtOrig does not have a value but it still have a top,left,height en width which I use.
I show you my code, the part with the for-next is taken from the internet.
I am trying to find a solution now for 3 days and now I only dream of huge charts (which is not good). So please can someone help me with this? This is the last forum, that I can try, I didn't get reactions from others.
with ChtNew.legend
.Top = ChtOrig.Legend.Top
.Height = ChtOrig.Legend.Height
.Left = ChtOrig.Legend.Left
.Width = ChtOrig.Legend.Width '* 1.1
.Top = ChtOrig.Legend.Top + ChtOrig.ChartTitle.Top
end with
With ChtNew.Plotarea
.Top = ChtOrig.PlotArea.Top
.Height = ChtOrig.PlotArea.Height
.Width = ChtOrig.PlotArea.Width
.Left = ChtOrig.PlotArea.Left
For i = 1 To ChtOrig.PlotArea.Top........
Legend - Position Property In 2007
Jun 17, 2008I have a 2003 vs. 2007 problem that I've spent a week or so trying to resolve, to no avail. I have created a fairly complex "dictator application" in Excel 2003. The application performs a bunch of calculations, and stores this inforamtion in a template workbook. The template itself contains one worksheet (to hold the data), and twelve empty "chart-sheets" which I later use to create plots. Of course, everything works fine and life is good in Excel 2003.
Flash forward two years, and half of my company is running 2007. When a 2007 user fires the plot creation routine, he is greated with a lovely error message (# 2147467259): "Method 'Position' of object 'Legend' failed".
Here's the full procedure I'm running to create the plots and position the legends:
Function bChartSumFileData(ByVal lTotalPlots As Long)
Const sSOURCE As String = "bChartSumFileData" 'Procedure Name (error-handling)
Dim bReturn As Boolean
Dim i As Long, j As Long, lNumSeries As Long
Dim sTemp As String, sPlotSetting As String
Dim chtTemp As Chart
Dim wksData As Worksheet, wksInfo As Worksheet
Dim serTemp As Series
Dim uSettings As CHART_SETTINGS
Dim vaPlotInfo As Variant
Obviously, lots of custom functions here; I'm also using a custom "type" to store chart settings (which I read from a *.txt file in a separate function). However, as far as the Legend goes, it shouldn't make a difference with the above code. When I stop execution after the error and look at the template workbook, the chart is created just fine, and the legend is visible, so I'm not sure why the error is occuring. Even better, the number of charts created prior to erroring-out is not fixed: sometimes the error occurs on the first plot, sometimes on the third, etc.
Format Range Based On Legend
Aug 22, 2008I need a basic code that accomplishes the following:
1) The user can define a legend for which he can format the cells in that legend however he wishes
2) Cells elsewhere in the sheet that have the same value as that in the legend will format exactly how they are in the legend
3) Default if not in the legend
I found this code that is close...but apparently it relies on the user selecting the cells he wants to format according to the legend FIRST...my code needs an Intersect command or something like that.
Also im not sure if this code actually takes into consideration font+border+shading formats...my code would need to take those into consideration.
example of the desired output is attached! ....
Remove Unused Legend Values From Graph?
Dec 19, 2013I am using bar chart to display top 5 units sold each year to my Excel file. In the data table, I have listed all the units and its number (quantity) sold. The problem is, the legend of the chart displays all the units instead of just displaying units that has values (top 5 units each year) which makes the legend hard to read (see attachment) How do I get Excel to select legends only if there is a value for it?
View 2 Replies View RelatedHow To Not Display Legend Entry In Table Below Graph
Jul 24, 2012I have a standard bar graph with 2 sets of data: 1 dataset on the primary axis and 1 on the secondary axis. I have defined the legend entries fairly specifically so the descriptions are long. I have also inlcluded a 'rank' value into the graph which doesn't appear on the graph as the values on either axis aren't at a range that allows it to display. However, I want to display the rank value in a table below the graph. However, when I add the table, the legend entries are so long, the graph gets 'scrunched' and looks terrible.
Is there a way to either:
1.) Only show the rank data in the data table below the graph?
or
2.) Show only the data in the data table below the graph and not the legend entries?
or
3.) Another option to display the rank data on the graph?
Excel 2010 :: Changing Legend Keys
Sep 18, 2012is there a way to change the legend keys (aesthetically) in 2010?
I created a pie chart using a template but I don't want to keep the defualt legend keys. I tried changing the theme but it appears that the legend keys that come up are the same no matter what theme I change it to.
The Chart is a 3d Pie chart, I think that matters because the regular square legend keys show when the chart isn't 3D.
Creating Custom Legend For XY Scatter Plot?
Sep 30, 2013I need a way to make a customized legend for a scatter plot, is there any way to do that through VBA? I have a scatter plot with some points highlighted green, and some points grey depending on the user selection and need to be able to create a legend based on what the user selects (e.g. Green - Category B, Grey - Category A, etc.).
For some reason I can't get Excel to rename points on the scatter, so I feel like there is only one option: create custom images and align them correctly with labels on the plot.
Changing Color Of A Cell Based On A Legend
May 10, 2007I think looking at the attachment might make more sense, but here is a brief description of what I want to do. I am trying to change the colour of a cell based on looking up the value contained in that cell in a predefined list (which in my example I have called a legend). I need to do this in VBa but my VBA is not at all good.
View 4 Replies View RelatedCharts, Series Name, Legend Key, Data Label
Jun 1, 2007I am applying for a job as an executive assistant and before the interview I have to complete a "test." I am having trouble with one direction. Here is the question:
"10.Apply series name and legend key in data labels to the Star data series. "
I have included what I think is the correct answer, but I am not sure. It is under the column chart sheet.
Formula To Combine Legend Values Based Of Where 1's Are Coded
Aug 18, 2009In this file i did paste special values so the links are no longer there, but in my original file alot of the values you see in the cells are pulled from other worksheets ( thats just so you know to lookin values of the cells and not the formula ).
I basically need row 18 starting from Column O to self populate.
Its based off of which has 1's in the Column. I have the completed here manually just to show you what i am looking for . I usually have to go to row 3 and Enter the data manually depending on which 1's are filled in for the column.
If i could have a method of having row 18 starting with Column O to self populate based off those 1's