Because I have a formula that updates the bottom of a table I have to put Total row at the top, the first row.
The propblem is that the filter obviously includes this row. Is there a way to tell the filter to skip over the first row?
How can I FILTER a range and display the unique items, one below the other, WITHOUT blank cells - with only a FORMULA. What I came up with is shown in the attached WB. I would like to present the countries like in C11:C15.
View 5 Replies View RelatedI have a database in Excel 2013 and now I want that when a value (a person's name) is entered in a cell. That then the database sort of filters the list for me, so it's still possible to make changes in the entries.
[URL]
Picture above to specify the search, which I would therefore like to edit
Dashboard_Action Pool Team 7.2.xlsm
I have been all morning working on a simplified version of the tutorial from YouTube: Create your own Excel Search Pt. 4. But came back later so only then that I can not change the data:?
I found a great bit of Advanced Filter code that works great, and fixed a problem of clearing a cell breaking the filter.
But if I want to increase the criteria from 1 row to 2, so you can start to include And , Or operations, it breaks the filter. Even an attempt at a manual one fails, until you put the criteria range back down to one row, then it's fine again.
I've tried changing the Target Row to >2 but that didn't work. how to make the criteria range bigger, and no problems of breakage if you clear the cells? It makes for a very useful automated Advanced Filter.
Here's the code :
[Code] .....
Database = the named area of raw data.
DATA is the name of the raw data worksheet
The criteria range should be AZ1:BC3, but of course royally breaks it...
How to automatically filter can filter and blue-colored cells.
View 4 Replies View RelatedWriting code to do the following:
Save advanced filter settings
Remove filter (or simply set to be 'select all'
Run other code (I have this piece of course)
Put filter back on with same selections chosen as when it was removed
(Need this becuase the code in the middle does not work properly when the data is filtered)
I just got into the world of PowerPivot, Excel 2013 and Pivot Tables and am in the process of creating a Dashboard which I will then be uploading to SharePoint 2013.
On top of page I added the new timeline filter which I've linked to my pivot charts. Now what I would like to do, is create an additional pivot chart which looks at whatever date range has been used in the timeline filter and subtract 5 years from that. So, when I select a date range of November 2013 - December 2013 in timeline filter, the additional pivot chart will show the details for November 2008 - December 2013. This is where I get stuck.
I'm using two SSAS cubes which I'm combining together in PowerPivot and then display in Pivot Tables and Pivot Charts.
I have two sheets open. On the first sheet i have a drop down list of dates from which I select. That list of dates is on another sheet. I want to be able to select a date from the drop down list, then when I go to the second sheet, excel skips down to the row that contains that date. I can also make it values if it is easier.
View 2 Replies View RelatedI have a range I would like to select but this includes blanks. I would like the VB to skip these blanks and find the last value / text in this row and then select that entire row.
Here is part of the code I have:-
How to skip vba if's?I have values in cells and depending if its yes or no, the code continues or it exits.How can I do the following?
If Range("E38").Value = "yes" Then
"skip to next if"
Else
[Code]......
I have 2 worksheets. On worksheet 1, I want to copy every 8th row in Column A. I want to copy the data from these cells onto worksheet 2. I want the data to appear on every other row on worksheet 2. To summarize, I'm trying to copy the data from every 8th row in one column BUT I want it to appear on every other row in another column.
I tried hiding the cells I don't need but then I can't sum.
I have this code that checks for cells that "" and then transfers a range to a separate sheet. I am running into problems if in the specified range all cells are "". How can I update this code to allow for all cells in the range to be "" without giving an error?
Sub Search_Notes_Main()
Application.ScreenUpdating = False
ActiveWorkbook.Sheets("Analyst Main").Select
Dim ConstantCells As Range, Cell As Range
Set ConstantCells = Range("B11:CX11").SpecialCells(xlConstants)
For Each Cell In ConstantCells
If Cell.Value "" Then Cell.Select
ActiveCell.Offset(-2).Range("A1:A4").Copy
ActiveWorkbook.Sheets("Notes & Ticklers Upload").Select
Range("B22").Select
I have code to highlight the min price in each row of a range of cells. However some rows are left blank as seperators between different types of products. These rows are being completely highlighted. Is there some way to skip blank rows?
View 7 Replies View RelatedI'd like to miss out a loop in my For/Next code. Basically I've written the code below which inserts a few rows above the object cell if it doesn't match the previous cell (to seperate my data). In light of the fact that I've inserted rows, the object cell is now a blank cell, so when my For/Next statement continues it insert some more rows thinking that the previous cell doesn't match the object cell. I wondered if it was possible to skip the object cell forward so the For/Next statement can continue in the place it left off (in effect, it would be like going to "Next" twice without doing any of the code in between).
Sub insertrows()
Set SubAss = Range("A11:A10000")
Cr = 0
prevcell = Range("A11")
For Each cell In SubAss
If cell.Value <> prevcell Then
prevcell = cell.Value
cell.Range("A1:A3").EntireRow.Insert
cell.Offset(-2, 1) = " Total"
cell.Offset(-2, 1).Font.Bold = True
r = 6
I want to return the value of E2 from sheet, "ALL INFO" and paste it in B2 on my current sheet. When I scroll this formula to right, I want the next to be the value of J2 from sheet, "ALL INFO," etc.
View 2 Replies View RelatedI am trying to link the cells up in a new workbook the problem is the data I need is setup in a way the formula needs to skip every other row.
For example:
I have two excel sheets. One is databank & second is list. Our data in databank sheet.
sheet : databank
column a is : name
column b is : address1
column b is : address2
column c is : city
column d is : district
sheet : list
column a is : name
column b is : city
column c is : district
Now i want in list sheet : name match with city & district respectively relevent name.
I have "live" data constantly updating some cells from VB program. When certain conditions are met I want to capture values from lets say 3 different cells and put them in one row. When another condition is met I want to the same thing but to put the values on to the next row and so on. Basically creating a log. The number of rows has to be pretty long. Conditions are pretty much easy "if A1=A2..." I could easily do that from VB program but I really need it to be done within excel.
View 1 Replies View RelatedI have a workbook which contains a master document sheet and 14 worksheets with various if(and or vlookup statements to extract the data as we need it at our centre.
I wasn't able to sort the data alphabetically with iferror leave cell black, so I changed it to if error "zz". I am now having to sort 14 sheets A-Z every time I make a change to my workbook...very time consuming and frustrating. I'm looking for a way to not have to sort my worksheets, to have it done automatically or is there a way to skip rows if the data doesn't match the formula? I don't have any experience in Macros
I have removed a lot of the pages from my workbook example. The sheet that I am trying to skip rows is the 'Dolphin Chn' one. Data is coming from the other sheets. I have used conditional formatting to make ZZ entries white, so they won't be visible.
2014 Master Document example.xlsx
I am trying to find a formula as follows: Go down a column When you find a number put a 1 in the column to the right. Keep going down, if you find the same number skip it until you find a different number and put a 1 there. Keep going in that manner skipping any number you have already seen. I have attached a sample file of what I'm trying to achieve.
View 2 Replies View RelatedI use the formula below to sum hours in a spreadsheet:
=((((SUM(B6:AP6)+(COUNTIF(B6:AP6,"x")*12.5))+(COUNTIF(B6:AP6,"d")*12.5))+(COUNTIF(B6:AP6,"m")*12.5)) +(COUNTIF(B6:AP6,"e")*6))
I would like to be able to change the range from "B6:AP6" to something which will start with B6 but only count every 6th cell up to AP 6. I could probably place a symbol at the top of each column I wish to count if needed. If I try to simply choose every sixth cell I get an error about too many arguments for the countif function The above formula is used to add hours for various shifts (symbolized by letters). For my current need I do not need the multiplier i just need to count how many of each letter appear in every sixth cell of a row.
This may be too fancy but if one formula would work to count every 6th cell starting with B6 and give me a sum , then automatically do the same starting with B7 and count every 6th cell etc...that would be great. I am trying to sum the number of each occurrences of each shift at each of 6 locations.
I've got a pretty nice Worklist setup in Excel that enables you to organize all the work you need to do in a month. However i end up with little holes in the list whenever i finish a task because what my macroes does is whenever a job is marked as done on the list it moves that job to sheet2, which contains completed jobs. I'd like to have a macro that shifts all the rows 1 down whenever a job is completed(ill just call it from the job complete macro) but it needs to jump over(skip) row 26 because that row contains some images that my macros use. Altso i would like to, if possible avoid inserting any rows or cells or hiding them because that will totally mess up my macros :p I know i know, im not dynamic enough.
I've included a sample of the worksheet so you can see what i want.
By the way, I've altso got some trouble with a public function.
I have set of data on one sheet
1
2
3
4
5
6
7
8
Want to copy into another worksheet but want it to skip every 7th row. like this
1
2
3
4
5
6
7
SKIP
8
9 and so on
I am using a statement to step through a list of filenames in a list using the following syntax:
For Each filename In selection
.....
Next
Occasionally, the filenames I add to the selection range do not appear in the source folder. When this happens, the macro throws up an error message and stops. If no match is found, I want it to automatically skip to the next filename in the list. I know there is a way to do this, I just do not know the syntax for achieving this.
This is how I think part of it is done, using the .Find statement:
For Each filename In selection
Workbooks.Find filename: = "...blah blah .."
Next
If no match is found, the statement is False, and I then need to add another statement to tell the code to skip to the next in the list if the filename does not appear anywhere in the selection range/list.
Below is the data I have.
Say I need to get values from Column C. VLOOKUP'ed values return the first value, but i need it to move on to the next result if the first one = 0.
so I will get
123 - not 0, but 0.22
234 - 0.1
345 - 0.....
I have been using various bits of information from all sorts of threads and made a somewhat nifty little Macro program for the company i work for.
The following threads may have my answer in them, but I can't see it or figure out how it could be restructured to my needs.
Disable Read-only Message Box
looks as if the file is set as readonly then to close it without saving
[url]
[url]
contains a msgbox I would like to add in, specifying that the file is read only therefore to abort current macro for particular file
concerns very much the problem I am having.
Basically what it boils down to is,
My Program Manager runs a daily report, then uses my program to update up to 7 different workbooks. Each having their own Sub program.
Some of the Supervisors or leads gets in to early and thus makes the file as a Read-Only, which of course stops my program and can not continue.
What I would like to learn is.. (from the countless threads I have looked through, I can't seem to find the answer)
Bring up a msgbox, informing the PM that a specified file is already open and therefore this particular process has been aborted.
Then it will move on to the next Sub, and so forth...
I want to thank everyone for their help directly or indirectly, (been reading threads for about 9 months now) and any future help as well.
And if it's not to difficult, could it be close to layman terms? I try to understand alot of these codes and I get lost with some of the wording. I am just pratically piecing pieces together with my "eyes closed" and somehow come out with a working VB codes.
Sub BlankGcolumn()
Dim cl As Range
For Each cl In Range("B8", Range("B15").End(xlUp))
If cl.Value = "" Then
cl.Offset(0, 0) = cl.Offset(0, -1) & " " & cl.Offset(1, -1)
End If
Next cl
End Sub
in the "Next cl" part, i want it to skip the next cell and do the one after it.
Ive tired: ....
I have a For Each...Next loop to read and write data from one workbook to another. Now, it's possible but unlikely that a certain "wellindex" (as defined by the Column A value) occurs more than once in the source spreadsheet, and only the most recent value should be used. And now to the actual question. Currently my macro runs a check to see if the current cell's wellindex has already been used, and if so, then it warns the user of potential double-entry. What I'd like to have it do is have it check whether the current cell's wellindex has duplicates further down (e.g., using a "findnext" method), and if so, then skip to the next cell in the For...next loop. I know that I can exit a loop with "Exit For" but I don't know how to have it go straight to "Next c" without embedding everything in an If statement.
Sub DataImport()
'Define variables
Dim sourcedata, sourcename, originname, sourcedate As String 'filename variables
Dim wellindex, ch4, co2, o2, bal, adj, com As String 'data variables
Dim cor, owp, owp2 As String, overwrite As Integer 'prompting variables
overwrite = 0
'Set up the data source
originname = ActiveWorkbook.Name
sourcedata = Application. GetOpenFilename("Data Output Files (*.csv), *.csv", , "Open the source file").........................
My excel program on my home computer has a default number format so that when I type in a number such as "1", the spreadsheet displays 1E-20. If I enter the number as "1.0", the display will show correctly. I have tried changing the formats for the spreadsheet, but I still cannot get the program to work correctly. I tried reinstalling office, but nothing changed.
View 6 Replies View RelatedCan anyone explain why the unique filter does not produce a unique result - sample attached?
View 2 Replies View Related
