Worksheet1 has data.
Worksheet2 uses VLOOKUP back to worksheet1 for data to populate cells on worksheet2.
The VLOOKUP command below returns a value of 126 to cell C6. I want to use the number result of the VLOOKUP in C6 (126) as part of a calculation for another cell. In thiscase, cell D6 is keyed in. I want to get the result of =(N(D6)-N(C6)) and put it in cell F6. To further complicate things, if C6 is blank, I want F6 to be blank.
VLOOKUP formula that returns a value of 126 from worksheet1 and puts it in cell C6 on worksheet2. It also returns a blank if there is a blank on worksheet1.
I am having trouble copying and pasting the results of a calculation on one sheet to another sheet. I believe my problem is that my destination cell is actually two cells merged so the destination is obviously not the same size as the source. Here is the section of code I am working on:
Code: Sub CalculateDeviceFailureTimes() ' ' Used to manipulate the UEM data file to find the outage times of different devices in the Astro System ' Dim Output As Integer
[Code] .......
Like I said the section after the initial 'If' works and 0:00:00 is entered into the cell D15 with no issue. My problem comes when I try to copy the result of the formula in 'G3' to 'D15'. Like I said I believe my problem is that 'G3' is a single cell and 'D15' is two cells merged..
how to get this? The calculated result is in cell D2.Tried VLOOKUP several times, but got N/A every time, i guess because the calculated value isn't exactly as in the table. Is there any way to get the closest one?
As of today, the entry EMPLOYEE is sometimes written as it was EMPLOYEE, and sometimes as EMP. I have to add these two together. How do I change the code of the macro?
I tried "=IF(ISNA(VLOOKUP(""EMPLOYEE"",C[-16]:C[-14],2,0)),0,VLOOKUP(""EMPLOYEE"",C[-16]:C[-14],2,0))"+ "IF(ISNA(VLOOKUP(""EMP"",C[-16]:C[-14],2,0)),0,VLOOKUP(""EMP"",C[-16]:C[-14],2,0))"
as I would in Excel, but of course it doesn't work.
I wan to create a table using 2 column of data.Below are the data
Type Name A Danon B Chris C Hilton A Jin A King B Ling C Seng D Aaron B Halim
I wan to convert these data to a table which have four dimension. A, B, C, D. With Vlookup function, i can do it. But, i find difficulty when the result is overlap, when in the type A, got Danon, Jin, and King. My result only can lookup is King. Other cannot display.
Add together D3+G3+J3+M3+Q3+U3 and put the result into W3? I think the reason it wont work is because there will not always be a value in D3/G3 and J3/M3
I would like to make a report for March that looks like this: Date SG Tank 3/15/12 1.002 2103 3/18/12 1.025 2044 3/18/12 1.036 2102
And the next month, make a report for April, then May... etc.
I tried to think of a way to do this using vlookup or index/match, but couldn't figure it out.I also tried using filters and then automating some kind of copy/paste, but there is an extra line between the heading and the data, so that the date column is filtered as text instead of date. The source data is not my spreadsheet, so that would be difficult to change.
I would like to do a lookup function, in which multiple results are returned.
i.e.
VLookup Result 1 Result 2 Result 3 Etc.
I know how to do it if there is only one answer but say I have a unique identifiers in which I want all the results in column B:B displayed one after another, say locations have numerous products sold/manufactured at it.
I have a Sheet named Main, Juz and another called wordforword.
Currently on Main sheet I have a vlookup that displays the results from wordforword. Instead of showing the result, I would like the user to be directed to the wordforword sheet result, with the click of a hyperlink.
I am making a company wide estimate sheet and having trouble with the drop down box. I have a drop down to pick the branch, but when I name the source it only says branch, even though I named the data on the branch sheet. I would like to be able to pick the branch initials and have it populate the phone and fax number under the main heading but am getting a error there.
Also for the labor is it possible to have it insert the correct labor into the formulas at the labor lines according to which branch is picked from the drop down.
Hi, I'm sure this will be an easy one for most of you. I need to extract data from an array for each time I have recorded a specific vehicle registration. I have used VLOOKUP but this only gives me one result. I need excel to display every enrty for the registration I am looking for. I have attached a sample file which should make more sence.
i put in a vlookup formula and it doesn't display any results, it just diplays the formula with the = sign in the cell. it does that with any formula i enter. i tried hitting it and everything.
I have a cell that I must remove the first 2 characters "RO" for each value in a column on a sheet called RAW DATA and put into a cell on a sheet called ROSS DATA. Some of the values in that cell have 3 digits after the RO and some have 5 digits. To do that I used
=REPLACE('RAW DATA'!A3,1,2,"")
Then I need to use this new resultant string as the lookup value in a VLOOKUP. The VLOOKUP will be looking at a named range called DAP on a sheet called DAP, in column 5 for an exact match and I need it to return that value to the cell.
I have tried using the indirect to no avail in different ways, and not sure that I fully understand the usage.
Using Excel 2003 and am trying to do a calculation by customer, by service type. Attached is the workbook and I've tried numerous ways to do this. On the revenue calculation worksheet, I am tryng to calculate the type of service minutes from the data retrieve worksheet, multipled by the service rate on the rate table for the specifc type of minute by customer. I'd like to build it as a vlookup by customer and then by service type, but have run into difficulty.
im trying to create a drop down menu that changes depending on the results of a vlookup. example: I have a vlookup function that populates a field with a product name based on the part number, however in some cases there are multiple products with the same part number. is there a way to create a drop down menu that contains all the product names shared by the same part number based on the part number that was entered?
In another tab, I have a report where a row containd the project name, and I want to find the maximum value of the dates in the ither tab, where my project name matches the project name on the tab data I am given.
So, if I have "Project-C", I need to know the max of the dates in the row for Project-C; but I dont know what row that will be on in the other tab. For info such as 'data1' I have been simply using vlookup using the project name as a key.
I am using the VLOOKUP function to pull multiple columns of information from another sheet in the same workbook based on a name. The sheet it is pulling from is a query. I am looking up product names, and in the query there may be multiple results that the function can find.
VLOOKUP only returns the first result that is found. What I am trying to do is get it to dump all the results into a drop down list in one cell. If I attach a drop down to one of the columns of information I am retrieving, then I can select which of the entrys to display, right? I think this should work I just don't know how to go about setting it up to do it.
How would I set up a VLOOKUP formula that attaches a drop down list containing all the results that the function finds?
I have a column with lots of tube station names. I have a look up table with the tube station name, and the possible lines that pass by that tube station.
One tube station may be covered by more than one tube line.
I am looking for a formula that will output every tube line that caters that one tube station.
first question, what is the best way to organise the data in my look up table. Second, is a vlookup the best formula to achieve the output I want? i.e. Reflect how many tube lines cover each station
see table below: If the station name has only one tube line, Vlookup works fine. When the station, such as Canno Street, has two tube lines, Vlookup only picks up one tube line. If I duplicate Cannot street under the station name, the Vlookup picks only one tube line.
LOOK UP TABLE A1 - station name B1 Tube line name Cannon Street District
[Code].....
Is there a formula that will output the data of the second tube line name in column D1?
I have searched other postings but can’t seem to find the answer.
I was wondering if anyone had a solution on how to string multiple Vlookup results as a text string so that if I Vlookup “Pear” it will return “Red, Blue, Green” in adjacent cell i.e
A B 1 Fruit Colour 2 Pear Red 3 Orange Purple 4 Apple Green 5 Banana Yellow 6 Pear Blue 7 Pear Green 8 Banana Black 9 Orange Green 10 Apple Black
What I need is a script or formula with returns multiple results and puts them into one cell.
The Excel is used as a Project Managment Work Sheet for Resources, working on different Projects and their dedicated hours
The raw data table looks like this: Column A: Project Name (=AllProjectsLists) Column E: Resource Name (=MasterDataResources) Column P: values from 0 to 8 (hours)
First I need to check per row the Resource Name. If the Resource Name is a match, than I need to check if in column P the value is bigger than 0. The result goes into a different sheet per row, one result per Resource, but the multiple results should be shown in one cell.
So the result should be something like:
Resource name "Thomas" .... Projects working on: "Project 1, Project 5, Project 13, ..." (in one cell) Resource name "Mary" .... Projects working on: "Project 3, Project 9, Project 13, ..." (in one cell)
I tried with this one, but it only returns one vale per cell:
So i have a spreadsheet that has a list of members and how many events they have attended. That is fine because i achieved this by doing a countif function on their account number. The spreadsheet has to sheets Events Attended TOTAl and List. In the list it has their name account number and what event they attended and what date. What i need is to have a function that will lookup their account number and return what event they attended but they might have been to 4 different events.
I have a total of 5 columns dedicated to Event attended so we can tell it to lookup first event and return result then have an if function in the next column to lookup event and if its returned in previous column move onto the next event attended.
I want vlookup to return results based on the *** and age of the person from tables in a separate sheet. For eg. if the person is "male" or "female" and if the person is "<=15", "16", or "17". I have been practicising with a formula that looks like this:
