# Vlookup And Match Results Given By A Formula?

Jan 22, 2014I want to set up a formula which automatically does vlookup or same sort of function on numbers given out by a link through a formula.

As a example i have attached the sheet.

I want to set up a formula which automatically does vlookup or same sort of function on numbers given out by a link through a formula.

As a example i have attached the sheet.

ADVERTISEMENT

i put in a vlookup formula and it doesn't display any results, it just diplays the formula with the = sign in the cell. it does that with any formula i enter. i tried hitting it and everything.

View 4 Replies View RelatedI have a cell that I must remove the first 2 characters "RO" for each value in a column on a sheet called RAW DATA and put into a cell on a sheet called ROSS DATA. Some of the values in that cell have 3 digits after the RO and some have 5 digits. To do that I used

=REPLACE('RAW DATA'!A3,1,2,"")

Then I need to use this new resultant string as the lookup value in a VLOOKUP. The VLOOKUP will be looking at a named range called DAP on a sheet called DAP, in column 5 for an exact match and I need it to return that value to the cell.

I have tried using the indirect to no avail in different ways, and not sure that I fully understand the usage.

I have a table with Dynamic Headings and Expanding rows, that's setup like below: The formula in the Qty column would produce a "0", if the result of the Index Match has a blank. For example in a different table the reference cell would have "Heading3". Therefore the results in the Qty column would be like example below. The products in the table below are like 0's and 1's to trigger the formula to calculate with the variables, or give a zero. If the Index Match found "Heading2" the results would be based on cells under "Heading2 Column" etc.

x

y

z

[Code]...

On the attached spreadsheet, i am trying lookup the selection name in column A on the summary sheet and search through column A of the other three worksheets adding together the three answers but something isn't working as the end answer is incorrect. I have tried vlookup and also tried combining offset/match but neither way i am getting the correct answer. I removed a lot of the data to simplify things and changed the figures to fictional ones for privacy reasons.

View 2 Replies View RelatedI have the following arrangement

PVCu_Woodgrain_DoorF190210300#REF!

PVCu _woodgrain_Door is a drop down list that selects from a number of named ranges.

The Cell that shows (F1) and is called DOORSTYLE with 6 choices F1, F2 ... F6 (I cannot change these to numeric only values)

300 is the 2 previous cells added together. It is called DRSZ1 and will match a numeric value in the named array.

My formula cell with the issue has this formula;

=INDEX(INDIRECT(ARRAYDR1),MATCH(DOORSTYLE,INDEX(INDIRECT(ARRAYDR1),0,1)),MATCH(DRSZ1,INDEX(INDIRECT(ARRAYDR1),1,0)))

I know MATCH(DOORSTYLE,INDEX etc. should be a VLOOKUP to find F1 in the named array, but I just cannot get it right.

I am trying to create a lookup formula where the cell value to match has a formula behind it.

For example: =INDEX(AR7:AR371,MATCH(G28,AE7:AE371,0))

The trouble I'm having is that the value in G28 is derived from a formula and the Index Match formula then gives a #N/A result. If I change the value in G28 (a date) manually, so directly enter a date, the Index Match formula works ok.

Is there any way of getting the Index Match formula to work, or Vlookup would also do although that at the moment that has the same problem with G28 having a formula behind it.

I have a worksheet that has two different years and I am trying to update a summary page that pulls the amount based on the year in the following formula.

View 5 Replies View RelatedHTML Code: VLOOKUP(M2,'FX Rates'!$A$1:$P$199,2,FALSE)

I have lots of vlookups in my spreadsheet. Match and Index is a better method and should speed up my spreadsheet (1000s of vlookups!).

I'm trying to create a rec report, ideally on one page, for multiple criteria. The situation is we get a report on our trade positions (investment stuff) from an outside service we use. We also have a report internally from what we've booked. We're looking to tie out are basic things like price, original par, revised par, trade date, counter-party banks, etc. I've consolidated data from both sources on one page (DATA) where all data points are lined up (say EXTERNAL is from rows 1-500, and INTERNAL is 510-1010). Now I need to create a front page showing the result of each tie-out. The lookup value will be a combination of the fund name + trade ticket number which would almost guarantee a unique ID (fund name XYZ, ticket number 12345 = XYZ12345)

Current tabs on spreadsheet: DATA, EXTERNAL, INTERNAL. I need to add a REC page

Question: What formula can I use to check on each and return TRUE/FALSE? The goal is to have about 8 columns on the REC, each for one of the tie-outs (let's use price as an example.). I know the basic VLOOKUP to return one value, but it appears in this case I will need VLOOKUP to check two matching values based on unique ID XZY12345, compare the price, and return TRUE if they match, FALSE if they don't

Here's something I saw from one of our spreadsheets that I think does the same to confirm counter-party, though I have no idea how to read this lengthy formula.

=EXACT(VLOOKUP(IF(Q2="COMPANY",R2,Q2),FUNDS!$M$1:$N$400,2,FALSE),

INDEX(PENDING!$G$4:$G$3218,MATCH(CP!C2,PENDING!$N$4:$N$3218,0)))

I have a range that has formulas that are based on other fcells outside the range.

What I want to do is, if the cell has a value to remove the formula and paste the results. If the filed is blank (no results from the formula) to leave the formula in place.

There could be a marco to run when this process is needed.

example attached

I am having some trouble getting a formula to work. I am building a report that pulls figures from a pivot table in another workbook. I am using a vlookup with match function to get the column index to find the relevant data I want. Where I need to add two columns together I am using sum, with the vlookup & match formulas nested in them e.g.:

=SUM(VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("FAID",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("BPCM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMD",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE))

Where:

F13 = Employee number

Column C on the pivot 156 workbook is where the employee number is based.

The Match formula is then getting the column index from the column headings of the pivot table ie. "FAID"

This in itself works fine, as long as it finds a match in the column headings. This is where i get the error as in the above function "COMD" is not in the pivot table. However I need to keep it included as it may appear on a future pivot table. Is there a way of getting the sum function to complete even though later in the formula it can't complete the vlookup? So it will ignore it, or assume the value is zero if it can't find it? The formula probably needs to do this for all the vlookups as some headings may drop off in future pivot tables.

I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)

View 2 Replies View RelatedI am trying to create formula that will show overtime worked in a given day. The code I am using is a simple one ([ cell - 8], for hours worked). The problem is when the time cells are blank/not used it shows a -8 in the cell. what I need to do to create a code that will eliminate the -8 from showing. The cell its self is taking the result from another cell with a formula and then subtracting 8 from the result of the formula in the other cell.

View 2 Replies View RelatedI have two sheets of data , sheet A and Sheet B.

Sheet B contains a column called "Name" and for each name, and for each name there are corresponding numbers. In sheet A, I have a "list of interest" in column A. What i want to do look through the data in sheetB to find a match from the list of interest and return the corresponding letters, located in column A.

I have filled out the first two rows of results that should be returned as an example.

One idea i had was to put a vlookup formula in each column result 1 to result 6 so i can catch all 6 "Serves" columns from column B, but there may be duplicates in the serve columns and vlookup only reports the first match.

I have a macro which returns the results for

=IF(ISNA(VLOOKUP("EMPLOYEE",Z:AA,2,0)),0,VLOOKUP("EMPLOYEE",Z:AA,2,0))

As of today, the entry EMPLOYEE is sometimes written as it was EMPLOYEE, and sometimes as EMP. I have to add these two together. How do I change the code of the macro?

Before it was:

ActiveCell.FormulaR1C1 = _

"=IF(ISNA(VLOOKUP(""[EMPLOYEE"",C[-16]:C[-14],2,0)),0,VLOOKUP(""EMPLOYEE"",C[-16]:C[-14],2,0))"

I tried "=IF(ISNA(VLOOKUP(""EMPLOYEE"",C[-16]:C[-14],2,0)),0,VLOOKUP(""EMPLOYEE"",C[-16]:C[-14],2,0))"+

"IF(ISNA(VLOOKUP(""EMP"",C[-16]:C[-14],2,0)),0,VLOOKUP(""EMP"",C[-16]:C[-14],2,0))"

as I would in Excel, but of course it doesn't work.

I have this function trying to added 4 VLOOKUP results together, but it only works for 2 rows and all others show as #NA.

=VLOOKUP(A8,MA!$A$8:$H$10,3,FALSE)+VLOOKUP(A8,PQ!$A$8:$H$10,3,FALSE)+VLOOKUP(A8,ON!$A$8:$H$19,3,FALS E)+VLOOKUP(A8,TW!$A$8:$H$22,3,FALSE)

I wan to create a table using 2 column of data.Below are the data

Type Name

A Danon

B Chris

C Hilton

A Jin

A King

B Ling

C Seng

D Aaron

B Halim

I wan to convert these data to a table which have four dimension. A, B, C, D. With Vlookup function, i can do it. But, i find difficulty when the result is overlap, when in the type A, got Danon, Jin, and King. My result only can lookup is King. Other cannot display.

In the attached I have an index/match formula in B15 that I cant get to return any results not even a N/A#

Quick Quote Tool.xlsx

I have a spreadsheet that holds salary information. At the moment it shows against each person the highest salary for a person of the opposite ***. What I would like to do is have another cell that shows the names of all people who have that salary.

E.g. if the highest comparable salary for someone of the opposite *** is 30000 then I would want a list of all the people with that salary.

Is it possible to do a look up that would show all the results that match certain criteria?

Worksheet1 has data.

Worksheet2 uses VLOOKUP back to worksheet1 for data to populate cells on worksheet2.

The VLOOKUP command below returns a value of 126 to cell C6. I want to use the number result of the VLOOKUP in C6 (126) as part of a calculation for another cell. In thiscase, cell D6 is keyed in. I want to get the result of =(N(D6)-N(C6)) and put it in cell F6. To further complicate things, if C6 is blank, I want F6 to be blank.

VLOOKUP formula that returns a value of 126 from worksheet1 and puts it in cell C6 on worksheet2. It also returns a blank if there is a blank on worksheet1.

=IF(ISNA(VLOOKUP(A6,Pivot_Table!$A$3:$D$36,3,0))+(VLOOKUP(A6,Pivot_Table!$A$3:$D$36,3,0)=""),"",VLOOKUP(A6,Pivot_Table!$A$3:$D$36,3,FALSE))

Add together D3+G3+J3+M3+Q3+U3 and put the result into W3? I think the reason it wont work is because there will not always be a value in D3/G3 and J3/M3

New KS4 grades Markbook.xlsx

I have a large spreadsheet of data, with lab results by date. Sometimes, there are multiple data points for a single date.

I need to produce monthly reports that list all the results for specific tests in a given month.

So, for example:

Date SG Property Tank

1/5/12 1.015 567324 2044

3/15/12 1.002 568210 2103

3/18/12 1.025 568056 2044

3/18/12 1.036 565200 2102

4/1/12 1.019 566713 2103

I would like to make a report for March that looks like this:

Date SG Tank

3/15/12 1.002 2103

3/18/12 1.025 2044

3/18/12 1.036 2102

And the next month, make a report for April, then May... etc.

I tried to think of a way to do this using vlookup or index/match, but couldn't figure it out.I also tried using filters and then automating some kind of copy/paste, but there is an extra line between the heading and the data, so that the date column is filtered as text instead of date. The source data is not my spreadsheet, so that would be difficult to change.

I would like to do a lookup function, in which multiple results are returned.

i.e.

VLookup Result 1

Result 2

Result 3

Etc.

I know how to do it if there is only one answer but say I have a unique identifiers in which I want all the results in column B:B displayed one after another, say locations have numerous products sold/manufactured at it.

I've spent the last week trying to do the following, with little to no success....and I'm running out of hair to pull out!!

I have a worksheet (let's call it DATA) with the following column headers:

* Site Name

* Year Initiated

* Status

plus a whole bunch of other columns of information.

On a separate worksheet (let's call it RESULTS) I'm trying to create a summary of all the Site Names where the Year Initiated = "2004" and the Status = "Active". There will be multiple occurences where this is true.

I then want to create further results where the year = 2005, 2006, etc., etc. I've been trying to use the INDEX function with variations of MATCH, SMALL, ROW, etc., etc., but so far, no luck.

Advanced Filtering is not an option as I need to do further manipulating of the results on the RESULTS worksheet.

I'm using a formula (with the SUMPRODUCT function) within which I need to match the month & year from an array with 3 "true" possibilities...

Meaning that if data (month & year) from the array matches any of the 3 months & year of a specific quarter (for example July 08, August 08, September 08), the result of that section should be "True".

The data to be matched (any of the 3 months of each quarter) is drawn from a table header (showing every month of the year) by using this "monthly" formula:

TEXT(H7;"mm.yyyy") where H7 holds "01.07.2008" (but displays "Jul. 08") and returns "07.2008".

I'm trying to extend it to something like:

TEXT({H$7;I$7;J$7};"mm.yyyy") to match either July 2008 (H7), August 2008 (I7) or September 2008 (J7) for the 3rd quarter of 2008 but when I hit Enter, I get an error and H$7 is highlighted ("ctrl + shift + enter" doesn't help).

Here's an excerpt of the formula that works well for other queries on my worksheet:

=SUMPRODUCT(--(TEXT('Current update analysis'!$O$2:OFFSET('Current update analysis'!$O$2;(COUNTA('Current update analysis'!$B:$B)+20);"mm.yyyy")=TEXT({H$7;I$7;J$7};"mm.yyyy")); --('Current update analysis'!$k$2:OFFSET('Current update analysis'!$k$2;(COUNTA('Current update analysis'!$B:$B)+20)="ok"))

how I could/should structure the formula for it to work?

I have a Sheet named Main, Juz and another called wordforword.

Currently on Main sheet I have a vlookup that displays the results from wordforword. Instead of showing the result, I would like the user to be directed to the wordforword sheet result, with the click of a hyperlink.

I do prefer formulas over macro if possible.

I am looking for Vlookup function, which returns multiple values without duplicates.

Please find the attachment : Vlookup Unique.xlsx

I am making a company wide estimate sheet and having trouble with the drop down box. I have a drop down to pick the branch, but when I name the source it only says branch, even though I named the data on the branch sheet. I would like to be able to pick the branch initials and have it populate the phone and fax number under the main heading but am getting a error there.

Also for the labor is it possible to have it insert the correct labor into the formulas at the labor lines according to which branch is picked from the drop down.

Hi, I'm sure this will be an easy one for most of you. I need to extract data from an array for each time I have recorded a specific vehicle registration. I have used VLOOKUP but this only gives me one result. I need excel to display every enrty for the registration I am looking for. I have attached a sample file which should make more sence.

View 7 Replies View Related
Copyrights 2005-15 www.BigResource.com, All rights reserved