VBA Array VLookup And Multiple Results Output In One Cell
Oct 21, 2012
What I need is a script or formula with returns multiple results and puts them into one cell.
The Excel is used as a Project Managment Work Sheet for Resources, working on different Projects and their dedicated hours
The raw data table looks like this:
Column A: Project Name (=AllProjectsLists)
Column E: Resource Name (=MasterDataResources)
Column P: values from 0 to 8 (hours)
First I need to check per row the Resource Name. If the Resource Name is a match, than I need to check if in column P the value is bigger than 0. The result goes into a different sheet per row, one result per Resource, but the multiple results should be shown in one cell.
So the result should be something like:
Resource name "Thomas" .... Projects working on: "Project 1, Project 5, Project 13, ..." (in one cell)
Resource name "Mary" .... Projects working on: "Project 3, Project 9, Project 13, ..." (in one cell)
I tried with this one, but it only returns one vale per cell:
=SMALL(IF(E$9=MasterDataResources; ROW(MasterDataResources)-ROW($A$2)+1), ROW(1:1))
=INDEX(AllProjectsLists; SMALL(IF(E$9=MasterDataResources; ROW(MasterDataResources)-ROW($A$2)+1); ROW(1:1)))
View 5 Replies
ADVERTISEMENT
Dec 24, 2013
I have a column with lots of tube station names. I have a look up table with the tube station name, and the possible lines that pass by that tube station.
One tube station may be covered by more than one tube line.
I am looking for a formula that will output every tube line that caters that one tube station.
first question, what is the best way to organise the data in my look up table.
Second, is a vlookup the best formula to achieve the output I want? i.e. Reflect how many tube lines cover each station
see table below: If the station name has only one tube line, Vlookup works fine. When the station, such as Canno Street, has two tube lines, Vlookup only picks up one tube line. If I duplicate Cannot street under the station name, the Vlookup picks only one tube line.
LOOK UP TABLE A1 - station name
B1 Tube line name
Cannon Street
District
[Code].....
Is there a formula that will output the data of the second tube line name in column D1?
View 3 Replies
View Related
Feb 26, 2009
I was provided previously with the code for a VLOOKUPS function for a project of mine by JBeaucaire. It can be found here, in the returned file he provided to me: VLOOKUPS multiple results in a drop down list.
The set up works wonderfully. But now I'm trying to accomplish something that is just a little bit different. I'm trying to to populate an array with all the results returned from an HLOOKUP formula. I was wondering if anybody had any code written that might create an HLOOKUPS function. I've tried to tweak the code provided for the VLOOKUPS function by JBeaucaire but I'm a novice, novice programmer and can only pull off simple functions and procedures.
View 5 Replies
View Related
May 8, 2012
I have a large spreadsheet of data, with lab results by date. Sometimes, there are multiple data points for a single date.
I need to produce monthly reports that list all the results for specific tests in a given month.
So, for example:
Date SG Property Tank
1/5/12 1.015 567324 2044
3/15/12 1.002 568210 2103
3/18/12 1.025 568056 2044
3/18/12 1.036 565200 2102
4/1/12 1.019 566713 2103
I would like to make a report for March that looks like this:
Date SG Tank
3/15/12 1.002 2103
3/18/12 1.025 2044
3/18/12 1.036 2102
And the next month, make a report for April, then May... etc.
I tried to think of a way to do this using vlookup or index/match, but couldn't figure it out.I also tried using filters and then automating some kind of copy/paste, but there is an extra line between the heading and the data, so that the date column is filtered as text instead of date. The source data is not my spreadsheet, so that would be difficult to change.
View 9 Replies
View Related
Dec 17, 2012
I would like to do a lookup function, in which multiple results are returned.
i.e.
VLookup Result 1
Result 2
Result 3
Etc.
I know how to do it if there is only one answer but say I have a unique identifiers in which I want all the results in column B:B displayed one after another, say locations have numerous products sold/manufactured at it.
View 1 Replies
View Related
Sep 15, 2014
I have used INDEX/MATCH/ROW/SEARCH functions, in different permutations, but I am unable to get the result. The data set is something similar to the below:
Car
Region
Own
Use
Color
Honda
North
Yes
I use it to go for work
Green
[Code] .....
I want to be able to do following (2 separate tasks):
Task 1 (if in A1 on a new sheet, I had Use, i want to list all the items in an adjacent column, skipping the blank rows)):
Use
I use it to go for work
Family trips
Weekend fun
2nd car
Work
Task 2 (if i had Honda (A2) and North (B2), I want to have the colors listed in Column 3):
Car
Region
Color
Honda
North
Green
White
I know this can be done by an auto-filtering or manual sort, but I have work with thousands of similar data on a regular basis, and i want to find a formula that will allow me to list the items based on different criterion.
View 2 Replies
View Related
Sep 20, 2012
I am looking for Vlookup function, which returns multiple values without duplicates.
Please find the attachment : Vlookup Unique.xlsx‎
View 3 Replies
View Related
Dec 8, 2009
Hi, I'm sure this will be an easy one for most of you. I need to extract data from an array for each time I have recorded a specific vehicle registration. I have used VLOOKUP but this only gives me one result. I need excel to display every enrty for the registration I am looking for. I have attached a sample file which should make more sence.
View 7 Replies
View Related
Feb 12, 2009
I am using the VLOOKUP function to pull multiple columns of information from another sheet in the same workbook based on a name. The sheet it is pulling from is a query. I am looking up product names, and in the query there may be multiple results that the function can find.
VLOOKUP only returns the first result that is found. What I am trying to do is get it to dump all the results into a drop down list in one cell. If I attach a drop down to one of the columns of information I am retrieving, then I can select which of the entrys to display, right? I think this should work I just don't know how to go about setting it up to do it.
How would I set up a VLOOKUP formula that attaches a drop down list containing all the results that the function finds?
View 7 Replies
View Related
Apr 24, 2009
I have searched other postings but can’t seem to find the answer.
I was wondering if anyone had a solution on how to string multiple Vlookup results as a text string so that if I Vlookup “Pear” it will return “Red, Blue, Green” in adjacent cell
i.e
A B
1 Fruit Colour
2 Pear Red
3 Orange Purple
4 Apple Green
5 Banana Yellow
6 Pear Blue
7 Pear Green
8 Banana Black
9 Orange Green
10 Apple Black
Is Vlookup the right function to go with here?
View 9 Replies
View Related
Feb 16, 2009
So i have a spreadsheet that has a list of members and how many events they have attended. That is fine because i achieved this by doing a countif function on their account number. The spreadsheet has to sheets Events Attended TOTAl and List. In the list it has their name account number and what event they attended and what date. What i need is to have a function that will lookup their account number and return what event they attended but they might have been to 4 different events.
I have a total of 5 columns dedicated to Event attended so we can tell it to lookup first event and return result then have an if function in the next column to lookup event and if its returned in previous column move onto the next event attended.
View 14 Replies
View Related
Oct 11, 2011
I'm attempting something new, a dropdown menu using vlookup to find data . If i use the simple example below, using data from B-D on 1 worksheet, where i want to find people by county:
A B C D
Search by County Name County Town
John Sussex Brighton
Eric Yorkshire York
Jim Cheshire Manchester
Liz Sussex Hove
Sarah Avon Bristol
I've created a dropdown menu on a second worksheet,A2, by county search, to return a persons name,county and town. The problem is if i select Sussex i will get 2 names who live in different towns within Sussex. I've created a simple vlookup which works fine, but because of Sussex having 2 results, i created a second vlookup for the second result to appear in the cell underneath.
The problem is that for the results that only have 1 result, the second vlookup returns a the same result as the first result, which i dont want.
Is there a way where multiple results will be shown if they exist, but for one result to appear if only one result exists?
View 9 Replies
View Related
May 2, 2013
I'm only starting to get to grips with arrays. I have what I consider to be a lot of data that I need to 'cut' into separate workbooks. I have written some code that does this by simply looping through each line, 250k+, checking against a variable and copying the row into a separate sheet. This took longer than it would have doing it manually. It was suggested to me that I use arrays to speed up the process. I have managed to store the test data into an array but am struggling to find a way to loop through and pull out an entire 'row' from the array based on a variable. I have looked for 2 days in various places to find some way to loop through the data held in the array, but to no avail.
That code will appear here from about 8am GMT tomorrow. I know that once I've cracked this I'm on the road to some very significant time saving and comprehensive report writing.
View 9 Replies
View Related
Jun 10, 2014
The 3 vlookup will be in a single cell for concatenation like :
=vlookup1&"-"&vlookup2&"-"&vlookup3
Problem the are 3 vlookups where it will return names (with format -> Fname, Given Name Middle) and probably blank returns.
I have problem with the replace since there are also spaces between the Fname,Gname and Mname sample name with spaces.
View 6 Replies
View Related
Oct 9, 2009
I have built a model where I have various inputs and various outputs. I have managed to set up the model so that whenever i hit the 'add to portfolio' button, a new row is added putting in the details from the inputs to a new row (beginning in row 25). The problem I am having is that I cannot seem to get the output results (cells I12:I17) to be included as well. I have attached my excel file.
View 4 Replies
View Related
Jun 11, 2008
I'm trying to get certain data from an export of a phone logging report for a call center. I have exported this data into an excel spreadsheet. I would now like to retrieve the following information from the sheet.
'Agent name, Date, time of Login, time of Logout (at end of day).'
I have coloured these fields in red for easy finding. I do not require anything else from this data, however, within this sheet there are multiple agent names and can span for over a month. All names and dates are required. I have attached the current sheet, and also what it will possibly look like once complete. I would prefer the whole process to be automated if possible.
View 2 Replies
View Related
Sep 18, 2006
Im working a spredsheet for my work, it is a database of qualifications for certain employees. There are about a hundred different qualifications and about 20 different employees. And some of the qualifications overlap. I would like to input a certain date in one of the cells, and have it copy into some of the other cells where the quals overlap. But i would like to input that date into any of the cells that overlap, not just one.
View 12 Replies
View Related
Jul 9, 2012
want to match column A to column C and if they match take whats in column D and put it in column B.
Column C has multiple instances of Column A and I would like each instance's, which is the following column, value put into column b
View 2 Replies
View Related
Feb 6, 2013
I have a worksheet with five columns (A, B, C, D and E)
The cells in Column B contain letters and/or numbers (without spaces) in no particular order.
The cells in Column C contain letters and/or numbers (without spaces) in no particular order.
I want to compare all characters in 1st Cell of Column B with all characters in 1st Cell of Column C, and display the matching characters in 1st Cell of Column D, and the character count of 1st Cell in Column D must be displayed in 1st Cell of Column E. note that multiple instances of the same character must not be treated as duplicates. When execution on 1st Row is finished then repeat procedure for Row 2, etc... Stop execution when first empty cell in Column B is located.
Example:
B1 = LJLM12
C1 = KY2MLK
B2 = ZCG4GM
C2 = X4GGGC
B3 = KTCBNG
C3 = GNBTBB
The script/code/formula must output the following:
D1 = LM2
E1 = 3
D2 = CG4G
E2 = 4
D3 = TBNG
E3 = 4
I am using Excel 2003. Y
View 2 Replies
View Related
Mar 31, 2014
I am trying to do a sort of index match thing using VBA. What I am attempting to do is to use the prefix of a long number and try to find that exact prefix in a string array, and output that string array value. So this is what I have so far as a test:
[Code].....
So I can match the text exactly so if I put PREFIXB in cell A1 in this example, i will get the msg box saying "YES", but if I make it PREFIXB1231k4j3jj1kj32cj, it will display "NO". I want to get it so that PREFIXB will be displayed in the cell that I put the formula in. So if A1 = "PREFIX1AAA100CF" and cell B1 = "=ABC(A1)", cell B1 will display "PREFIX1AAA".
Now the thing is that these prefixes can have different lengths, but will never encompass the exact prefix of another. So if I had a prefix of: PRE1AB, I won't have a prefix of PRE1A.
View 2 Replies
View Related
Feb 1, 2012
Worksheet 1: In column A I have a people's initials. In coumn B I have text boxes with miscellaneous text. (The same person could have multiple rows within this sheet.)
e.g.
AAA blue
BBB orange
AAA round
CCC smelly
AAA elongated
Worksheet 2 I want to show:
A2 = initials, B2 = first text box associated with that person, C2 = second text box (different row) associated with that person (if applicable), D2 = third text box (different row) associated with that person (if applicable), etc.
e.g.
AAA blue round elongated
BBB orange
CCC smelly
View 3 Replies
View Related
Jan 3, 2014
trying to output a 1x10 array of the function FwdRate. The inputs are all 1x10 horizontal ranges of numbers. So for example to calculate FwdRate 1 I need to take the first values from each of the input ranges and enter them into the formula below ! Where am I going wrong as all I get is the VALUE error when I press ctrl+shift+enter ?
Option Explicit
Function FwdRate(Tau As Range, f1 As Range, dtau As Range, vol1 As Range, vol2 As Range, vol3 As Range, m As Range) As Variant
Dim VArray() As Double
Dim i As Integer
Dim n As Integer
Dim dt As Double
Dim X1, X2, X3 As Double
[code].....
View 2 Replies
View Related
Jan 28, 2008
I am trying to get a list of states, based on their expiration date.
I have all 51 states listed, some states have 2, 3 or more licenses, so I created a column that I hid of the state abbreviation, for the use of formulas.
If the license expires in 30 days or less I want to display the state abbreviation. I couldnt figure out how to do an array output, so this is what I am trying to come up with.
=IF(COUNTIF('Kevin Doyle'!F5:F250, "
View 9 Replies
View Related
Jun 9, 2014
I have attached a worksheet which I need to show the last update and last date customer contacted, The formula :
=LOOKUP(2,1/($F2=Data!$D$1:$D$10000)/(Data!$B$1:$B$10000=MAX(IF(($F3=Data!$D$1:$D$10000)*(Data!$M$1:$M$10000=COUNTIF($F$2:$F3,$F3)),Data!$B$1:$B$10000))),Data!B$1:B$10000)
is used to output the last contact and the formula contained within column Av, Both of which contain #N/A
View 4 Replies
View Related
Nov 6, 2009
I have a long list of values, a few thousand lines, that I need to input into an array so I can run a formula on the values in the array and then take those results and put them into another array which I can then call to output down a different column. Is there a faster way to accomplish this than the typical For Loop with the activecell.value and activecell.offset commands, that just takes forever.
View 15 Replies
View Related
Jan 8, 2010
i am trying to create an Array that will print the stock number as a title on row A. e.g. "Stock 1" in A2 "Stock 2" in A3...etc. here is what i have attempted:
View 2 Replies
View Related
Apr 3, 2014
I have a spreadsheet with 51 worksheets - a "Master" worksheet and 50 datasheets (labelled 1-50). Within the "Master" worksheet the first column has numerical values ranging from 1-50.
One of the columns in the "Master" worksheet is a VLOOKUP that is trying to pull data, of which the table array is dependent upon the value in the first column. For example:
If cell A2 has the number 1 the VLOOKUP would be:
=VLOOKUP(E2,'1'!$A:$E,3,0)
If cell A2 had the number 2 the VLOOKUP would be:
=VLOOKUP(E2,'2'!$A:$E,3,0)
If cell A2 had the number 3 the VLOOKUP would be:
=VLOOKUP(E2,'3'!$A:$E,3,0)
etc.
Tried nesting an INDIRECT function with the VLOOKUP but it didn't work.
View 2 Replies
View Related
May 3, 2007
I know how to do Vlookup and get the value on the +1 column as following
=VLOOKUP(50, D5:E19, 1)
What about I would like it return the value of -1 Column. Can I using some function of Offset with other functions?
View 4 Replies
View Related
Aug 22, 2014
I need to make a vlookup which returns values for many 1000 material numbers. The values is located several other files. My problem is that i dont want to update all vlookups every time the other files (with my values) are getting updated.
e.g.
i want to have en cell A1: FileNameVersion1 and when someone updates the file the only thing i have to do is to change the name in cell A1 to FileNameVersion2.
View 3 Replies
View Related
May 27, 2009
Sheet 1 contains:
Item Sheet 2
ABC =vlookup(A2,'Sheet 2'!$A:$B,2,false)
Sheet 2 contains:
Item Data
ABC 2
I'm trying to get the vlookup to return the value "2"
Right now, I'm manually entering the tab name in the vlookup function, even though it's contained in cell B1.
The tabs are contained in the same workbook if that matters. Since this workbook is growing rather quickly, this is a painful process and doesn't feel very scalable. Since I'm using a mac, I need to do this with functions vs. macros. Does anybody know how I can reference a cell for the name of a tab in the vlookup function?
I was thinking I could maybe somehow do this with the INDIRECT function but I'm stumped.
View 3 Replies
View Related