Hyperlink To Blank Available Row?

May 10, 2014

"A12" says "Click for new line". I want that to be a hyperlink so if someone clicks it, it will automatically take you to a fresh new line to input there information.

Row 14 and above is a frozen pane.

Anything from row 15 below will contain data.

I could have 1,232 rows and the users who are using this spreadsheet probably won't fancy scrolling down for ages to find a new row to enter the information...

View 2 Replies


ADVERTISEMENT

Hyperlink To Next Blank Cell In A Row?

Feb 13, 2014

I have a master spreadsheet listing various forms that have to be completed on a monthly basis which are on separate worksheets. I want to be able to put a hyperlink on the master sheet to take the user to that particular form but also to the next month's entry, eg, once Jan, Feb and Mar have been completed, then the hyperlink will take the user to April, etc. Pretty simple I thought??? Not so...... I've found this formula:

=HYPERLINK("#Sheet2!A"&COUNTA(Sheet2!A:A)+1,"Note1")

which goes down the column, however I want it to go across the row (my form needs the months to go across, not down). My (very limited) understanding of this formula is: reference sheet 2, count non-blanks in column A and go to the next cell down????

So my question is, can this formula be adapted to count non-blanks across a row, or is this a bit of a red herring? Also, what does the # denote on this formula??!!!!!, I cannot find anywhere that says what this is trying to do.

View 9 Replies View Related

Hyperlink In Cell Have Email CODE But Hyperlink Is Not Clickable

Jul 2, 2009

I have this code that looks through my worksheet once the conditions are met it will email, and in column "M" I put a hyperlink to where the document is stored. All works as far as the email format, even grabs the hyperlink but itís not clickable in the email.

Here is the code.

I am outlook 07 and vista 07.

Option Explicit
Const Startingrow = 11 'Data starts on row ##
Const AlarmDelay = 183 'send warning
Sub CheckTimeLeftFac()
'References needed :
'Microsoft Outlook Object Library

Dim i As Long
Dim j As Long
Dim msg As Long
Dim Lastrow As Long
Dim WhoTo As String
Dim SubjectLine As String
Dim MessageBody As String
Dim olMail As Outlook.MailItem
Dim olApp As Outlook.Application
Dim strLink As String

View 10 Replies View Related

Hyperlink - Insert New Rows Without Losing Hyperlink?

Jan 30, 2014

I have hyperlinks betwene one worksheet to another - they only only hyperlinked thourh column & rows (eg: A100) etc. How can I lock these hyperlinks but still allow users to insert new rows without losing their place?

View 2 Replies View Related

Hyperlink Address From Hyperlink Formula/Function

Oct 17, 2006

I am having a slight problem copying hyperlinks. I have written some code that sorts data by date and then creates a simple diary. It originally placed the name of the event in the new diary sheet. What I would like to do is instead of copying the name into this new sheet copy a hyperlink that I have created to the company's website for that event.

I can create the hyperlink using hyperlink(B1,A1) where A1 is the company name and B1 is the web address but since the new sheet will not have the underlying data I need to actually copy the values and format of the hyperlink rather than the formula.

View 6 Replies View Related

Leaving Blank Cells Blank In Dragging Formula Combining Different Formulas In One Cell?

Aug 2, 2014

I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.

View 8 Replies View Related

Excel 2010 :: VLookup Result Blank If Column Index Number Is Blank

Mar 3, 2014

The below piece of code carries out a vlookup on a defined cells value and produces a result in sheet one, however if the column index number in sheet 2 (Database) is empty the result 00/01/1900 is produced.

I'm not sure how to say leave the result blank if the column index number is blank.

Excel 2010
Userform = Tab 1
Database = Tab 2

View 6 Replies View Related

Count Blank Cells Within A Range Not Including Fully Blank Rows

Jul 15, 2008

I can count the blank cells withiin a range using

=COUNTBLANK(C6:AD2506)

But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.

It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.

View 14 Replies View Related

IF Blank Or If Not Blank Function That Works With Adjacent Cell With Formula In It?

Aug 12, 2014

I have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).

What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)

View 5 Replies View Related

IF Statement To Leave Cell Blank If Multiple Cells Are All Blank?

Mar 12, 2014

I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.

View 8 Replies View Related

How To Populate Blank Cells With Sequence Until Non Blank Cell Is Encountered

Mar 22, 2014

I presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.

What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).

This all needs to be done in Arial, 10pt, white.

View 10 Replies View Related

Imported Data Creates Blank Cells That Aren't Really Blank

Feb 21, 2006

Here's what I'm attempting to do: For each column, X,Y, Z, I am attempting
to count nonblanks. However, the data was imported from Access and Oracle,
and Excel treats what appear to be blank cells as nonblanks. I've tested
this theory by highlighting a couple of "blank" cells and deleting them, and
my count changes. So, can I get Excel to put a value into my "blank" cells,
so then I could filter it out, or create a formula that would only count
dates in my columns (which is what I'm after).

This is what I'm looking at:

A B C
1 2/4/2006 2/6/2006 ("blank")
2 ("blank") 12/13/2005 1/7/2006
3 2/20/2006 1/15/2006 ("blank")

In each column if I use a COUNTA I'll get a total of 3, instead of 2 for A,
3 for B and 1 for C.

View 14 Replies View Related

List - Filling In Each Blank Cells With Value Contained In First Non-blank Cell Above It

Feb 27, 2013

I have a list that looks something like this:

Column B

Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5

The range of cells in column B containing the items has a name "ColStreams"

I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.

View 2 Replies View Related

VLOOKUP - If Table Array Is Blank Need It To Return Blank?

Mar 27, 2014

I am creating a tracking spreadsheet where i can toggle between months (attached). It returns data properly when I select January or February from the yellow highlighted dropdown list. However, when i choose March, it returns 1/0/1900 because no data has been entered for March (table array) on the AAAG tab. How do I write the formula to return a blank cell on the summary sheet when no information has been entered into the table array yet?

View 2 Replies View Related

Replace #VALUE! Error For Blank Cells With Blank Cell

Nov 17, 2008

The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.

=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))

View 9 Replies View Related

Insert Blank Row If Adjacent Cell Value Is Blank

Jan 7, 2013

If the value of the adjacent cell in column A is blank, insert a blank row through Column B:J.

View 9 Replies View Related

Return Blank If Concatenating With Blank Cell?

Apr 3, 2014

in one column of my spreadsheet and it is returning the correct concatenation for the appropriate lines. However, I wish to have the column's cells return an answer of blank (" ") if B15, B16... etc is blank. In other words, at the moment, a correct answer would read something like '1810sd0000' C10 and B15 used, while an incorrect answer would still display '1810', but I want it to be a blank cell.

View 8 Replies View Related

Why After Paste Value The Blank Cells Are Like Not Blank Anymore

Aug 13, 2013

the situation is i have a sheet, contains like 500 cells, from A1, to T500, some of the cells are blank, then i figure that from cell A1 to E500 not all the words in capital, so i make it with upper on the2nd sheet, then, i copy + paste value back to the first sheet (A1 to E500)

i get wht i want, but why it's like there's no blank cells anymore on my worksheet.

like you know, if u want to jump from a filled cell to the blank cell, you would hit Ctrl + Down, it jump to the very end of the datas that i paste value before.

so when i hit Ctrl + Down from A1, it jumps to A500, meanwhile the filled cells only 10 cells.

View 6 Replies View Related

Copying Down Blank Cells Until Blank Row Is Reached?

May 24, 2014

I have a spreadsheet with data in 7 columns. Columns A-d have one line of data in them but the other 3 columns have more than one line.

How do I write a macro which will copy the first row of the first 4 columns down until I reach an empty row?

View 2 Replies View Related

Copy Or Create 'blank Cell' As 'blank'

Feb 4, 2009

using a formula to copy a cell A1. if A1 is blank, i need forumula result in blank instead 0...is it possible..

View 9 Replies View Related

Count Blank & Zero Cells Where Corresponding Column Not Blank

Jun 15, 2007

I was curious if it is possible to give a single cell multiple number formats based on what the number is in the cell. So for example if my number is bigger than 1000, I would like to use comas so that it looks like this 1,000. However, if it is less than 1000 I would like it to look more like this 999.00.

View 6 Replies View Related

First Blank Cell In Column & Offset To 1st Blank In Row

Jul 11, 2007

I have checked archives, some similiar but not quite what I want.

In code below I want the output instead of going offset one column to right in same row to go one column to right into the next blank cell.

View 9 Replies View Related

If / Then Functions Looking For Blank / Not Blank Cells

Dec 14, 2012

I'm am trying to combine columns B and C in such a way that the result will appear as B: C when C is populated and B alone when C is not populated. I've tried a variety of functions, and I'm unable to get the result I want. This is my most recent attempt:

=IF(C2=ISBLANK, B2, B2&": "&C2)

View 3 Replies View Related

Copy First Non Blank Row And Paste On First Blank Row

Mar 2, 2013

I'm working on this macro that copies data on sheet1 from A2:AI2 till the last non-blank row in the same range i.e. A:AI and paste it on sheet2 in the first blank row. However, my code keeps picking up A1:AI1 from sheet1 as well and pastes it on sheet2 just before the data that I actually want to paste. Here's my code:

[Code] .....

View 2 Replies View Related

If Two Cells Are Blank Return Blank - If One Has Date Subtract Today Date

Apr 24, 2013

Using one spreadsheet with three date columns and two columns counting days.

If there is a value in Resolution date, then Column N is blank
If there is no value in Submit date and Resolution date, then Column N is blank
If there is no value in Resolution date, and there is a value in Submit date, subtract Submit date from todays date to show how many days it has been pending approval

Created on = J4
Submitted on = K4
Resolution Date = L4
Days to Approve = M4 I've got that formula =IF(L4="","",L4-K4)
Days Pending Approval= N4 (cell with formula)

If Resoultion Date L4 has a value, return blank
If Submit on K4 and Resoultion date L4 are blank, return blank
If Resolution date L4 is blank, and Submit on K4 has a value, subtract Todays date from Submit on K4 to show Days Pending Approval

Cell J4______Cell K4______Cell L4__________Cell M4__________Cell N4
Created on___Submit On___Resolution Date___Days to Approve___Days Pending Approval
4/5/13_______blank______Blank____________Blank___________Blank
4/5/13_______4/5/13_____4/7/13___________2_______________Blank
4/5/13_______4/5/13_____Blank____________Blank___________()Today-K4

View 3 Replies View Related

Hyperlink To A Value

Feb 4, 2010

I am trying to do is have a hyperlink go to another sheet after searching the second sheet for the same value. I have a sheet labeled "IQI" which has the total number of cases for a certain condition. I have another sheet labeled "IQI Cases" which lists out each case individually.

I want to be able to click on the Condidion in the IQI sheet and have that take me to that specific spot in the IQI Cases sheet where the cases for that condition begin.

Right now I just have a simple hyperlink to a range of cells. But each month a report is generated and the range will be different and I have to go and change the range each time. So I guess I want a hyperlink and a lookup function combination.

I dont know if this would be a Macro or a formula.

View 13 Replies View Related

Hyperlink To PDF

Jan 10, 2005

I am trying to use hyperlinks to navigate documents. I created a html document with excel and used hyperlinks to PDF documents.

At first the hyperlinks worked fine, opening the PDF software and in turn the PDF document.

Now when i click the hyperlink in Internet Explorer for the PDF document to open, it brings me to a blank HTML document.

In other words, the hyperlinks to the PDF's no longer open the PDF software and document.

View 9 Replies View Related

Get Hyperlink Name

Oct 20, 2008

Imagine if the word below was a hyperlink to a webpage somewhere;

House

I would like to know how to get excel to look at this paticular page and return that one word to a cell, so in this example, I would like cell A1 to to contain the word house.

I do not need any information about where the link is referring to, I already have this information.

All I need is for excel to look at this link and tell me what it is called.

View 9 Replies View Related

How To Add Hyperlink To VLookup

Jul 24, 2014

I'm having a problem getting a hyperlink to work when adding it to a vlookup. The vlookup is looking at a page number and returning the named drawing from an Auto Desk Inventor File. I'm trying to get the returned drawing name to become a hyperlink to open the drawing. I would rather have this added to the formula so if a page number ever changes the hyperlink will change to the correct drawing also. Here is what I have so far but it is just returning an error of " cannot open the specified file". =HYPERLINK(IF(E5="","",(VLOOKUP(E5,'Inventor Import'!$A$2:$E$200,5,FALSE))))

View 4 Replies View Related

Hyperlink In Same Cell....

Apr 29, 2009

I have tried searching the forums and google but most of them explain how to use hyperlink with regards to different cells or worksheet or dedicated internet links.
i have a little twist to that and am unable to figure out exactly how to make that happen?

My requirements:
cell a3 has value 321011
now this needs to be hyperlinked iteself meaning

cell A3 will display the same value 321011 but should be hyperlinked to
http://support.microsoft.com/kb/321011

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved