Why After Paste Value The Blank Cells Are Like Not Blank Anymore
Aug 13, 2013
the situation is i have a sheet, contains like 500 cells, from A1, to T500, some of the cells are blank, then i figure that from cell A1 to E500 not all the words in capital, so i make it with upper on the2nd sheet, then, i copy + paste value back to the first sheet (A1 to E500)
i get wht i want, but why it's like there's no blank cells anymore on my worksheet.
like you know, if u want to jump from a filled cell to the blank cell, you would hit Ctrl + Down, it jump to the very end of the datas that i paste value before.
so when i hit Ctrl + Down from A1, it jumps to A500, meanwhile the filled cells only 10 cells.
I have a range that I need to copy to a new worksheet. It basically looks like steps going across the sheet. Whenever I skip blank cells during the paste to the new sheet Excel does not skip anything. Any ideas on how I would shift all data to be on the left side of the without copying the blank cells.
I'm working on this macro that copies data on sheet1 from A2:AI2 till the last non-blank row in the same range i.e. A:AI and paste it on sheet2 in the first blank row. However, my code keeps picking up A1:AI1 from sheet1 as well and pastes it on sheet2 just before the data that I actually want to paste. Here's my code:
I have a workbook which has data in column A. I also have data in column I. What im trying to do is copy and paste the data from column I to A but if the cell in column I is blank I need that ignored and the data thats in column A at pres kept.
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells A40 A41 A42 A43
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
I presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
Here's what I'm attempting to do: For each column, X,Y, Z, I am attempting to count nonblanks. However, the data was imported from Access and Oracle, and Excel treats what appear to be blank cells as nonblanks. I've tested this theory by highlighting a couple of "blank" cells and deleting them, and my count changes. So, can I get Excel to put a value into my "blank" cells, so then I could filter it out, or create a formula that would only count dates in my columns (which is what I'm after).
This is what I'm looking at:
A B C 1 2/4/2006 2/6/2006 ("blank") 2 ("blank") 12/13/2005 1/7/2006 3 2/20/2006 1/15/2006 ("blank")
In each column if I use a COUNTA I'll get a total of 3, instead of 2 for A, 3 for B and 1 for C.
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
Need to create a simple loop, I have 50 cells (need to paste in lowest cell) - I need this to occur:
-Is cell A1 empty? if yes - paste -some other stuff happens... -Is cell A1 empty? no, is cell A2 empty? - paste -some other stuff happens... -Is cell A1 empty? no, is cell A2 empty?, no, is call A3 empty? -paste
I'm trying to copy the non blank cells in an area ("B120:K239"). and special paste (values only) to the next blank row of the actual work area (3 pages) within the worksheet. The area that this needs to paste to is between("B10:K29, B44:K63, B78:K97"). Problem is that if there are more rows to be copied and pasted then there are open rows on the first sheet it gives an error due to the rows outside those areas having different formats (merged cells and that)
Question: Is there anyway to special paste between ranges? I've tried to hide the inbetween rows and that still doesn't work. Could it be possible to add something to this code to ignore hidden rows or to only paste to visible rows?
Sub Special_Paste () Application. ScreenUpdating = False With Range("B119") . AutoFilter Field:=2, Criteria1:="<>" With Range("B120:K239") Application.CutCopyMode = False .Copy With Range("30:43") .EntireRow.Hidden = True With Range("64:77") .EntireRow.Hidden = True Dim NextRow As Range Set NextRow = Range("B97").End(xlUp).Offset(1, 0)...............
The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
What can I add to the macro I already have in place (below) to accomplish what I'm looking for (2 parts)? ...
1) I need to copy everything (formulas) that is in C7:F7 and paste it down to all "active" rows - I'm defining an active row by any row where column A is not blank.
2) I need to copy everything (formulas) that is in Q7:AF7 and paste it down to all "active" rows - I'm defining an active row by any row where column P is not blank. (You'll notice by the screenshot that there will be blank cells in column P mixed in with non-blank cells.)
However, I want to ignore the "" cells and the truly blank cells... However, I think all of them will have "" since I have this formula in all of the ones I'm putting in the range:
[Code]....
How do I go about getting these results into a named range so I can use it on validation since validation only seems to ignore truly blank cells and not the "" ones.
The objective is to copy the value from one cell if another cell in the same row is blank onto another sheet (in another excel file if possible). This would have to be done for all value in the sheet.
I was curious if it is possible to give a single cell multiple number formats based on what the number is in the cell. So for example if my number is bigger than 1000, I would like to use comas so that it looks like this 1,000. However, if it is less than 1000 I would like it to look more like this 999.00.
I have spent several hours searching the forum but have not been able to find any code that I could tailor to my specific need.
Basically, when I press a button on a 'Util' sheet, I need to cut every row on the 'Source' sheet with 'Closed' in column 'B', paste the rows to the next blank row on the 'Closed_Requests' sheet, and delete the resulting blank row from the 'Source' sheet.
I have sporadic cell values in a column. I will be describing the lamen logic I use to fill in these blanks manually. Find the first nonblank cell in the column, then look for the next nonblank cell in the column. I count the number of blank cells in between. If even # of blank cells, then I give the first half of the blanks the value of the first nonblank cell and the second half of the blank cells the value of the next nonblanck. If odd # of blank cells, then I do the same with the exception that the odd cell that falls in the middle will be randomly designated the value of the either first or second nonblank cell.
I'm am trying to combine columns B and C in such a way that the result will appear as B: C when C is populated and B alone when C is not populated. I've tried a variety of functions, and I'm unable to get the result I want. This is my most recent attempt:
Using one spreadsheet with three date columns and two columns counting days.
If there is a value in Resolution date, then Column N is blank If there is no value in Submit date and Resolution date, then Column N is blank If there is no value in Resolution date, and there is a value in Submit date, subtract Submit date from todays date to show how many days it has been pending approval
Created on = J4 Submitted on = K4 Resolution Date = L4 Days to Approve = M4 I've got that formula =IF(L4="","",L4-K4) Days Pending Approval= N4 (cell with formula)
If Resoultion Date L4 has a value, return blank If Submit on K4 and Resoultion date L4 are blank, return blank If Resolution date L4 is blank, and Submit on K4 has a value, subtract Todays date from Submit on K4 to show Days Pending Approval
Cell J4______Cell K4______Cell L4__________Cell M4__________Cell N4 Created on___Submit On___Resolution Date___Days to Approve___Days Pending Approval 4/5/13_______blank______Blank____________Blank___________Blank 4/5/13_______4/5/13_____4/7/13___________2_______________Blank 4/5/13_______4/5/13_____Blank____________Blank___________()Today-K4
In sheet "diary" I have data in certain rows in column A8:C10000 that contains values if a certain condition is met. I need a vba to copy and past only non blank cells in column D8:F10000. I first wrote a formula with index but it takes too long to caculate.
Problem, on my sheet, in cell C1, I put the formula COUNTA(B4:B2000). The cells B4:B2000 looked liked blank cells but why my calculation is that total 1406 cell including something and not blank?
I get reports weekly that contain too much information. Using "IF - LIKE - THEN" in my macro I copy and paste only the relevent data from the new work sheet to a separate worksheet.
It works fine except, it pastes over the previous data instead of below it overwriting the old info. Please have a look at my code, How do I instruct it to paste in the first empty row?
I have a spreadsheet where the value in cell A2 can change daily. I need a formula or macro that will allow me to copy the value in cell A2 and paste to B2, but if B2 is not empty, paste to C2, and if B2 and C2 are not empty, paste to D2, etc.
The below piece of code carries out a vlookup on a defined cells value and produces a result in sheet one, however if the column index number in sheet 2 (Database) is empty the result 00/01/1900 is produced.
I'm not sure how to say leave the result blank if the column index number is blank.
I would like a macro to do this...If a cell in column G is blank and the cell in the same row in column C is NOT blank, highlight the blank cell in column G Red.
I need the search to stop ONLY when it gets down to the bottom-most row of data in column A.
Note: Any row headers will always be in row 1 only
