Hyperlinks From Userform Entering In The Wrong Cell?
Jun 24, 2013
I'm putting together a userform and all the values and ending up in the correct place except for the two hyperlink cells.
I think it is because I've got the anchor wrong but Im not sure how to correct. I'll put the whole form in so if there is something fundametal going wrong in the early stages I can be put right, but the hyperlink issues are down the bottom at the Offset 16 and 17.
VB:
' Write data to worksheet
RowCount = Worksheets("Resources").Range("A2").CurrentRegion.Rows.Count
With Worksheets("Resources").Range("A2")
[Code]....
View 4 Replies
ADVERTISEMENT
Aug 6, 2008
[code]...
Above is what I hav already, I was thinking it would help if each card had an additional field added that told you if the contents were valid. This could also say empty if all fields were blank. This field could for example use an if statement to check that you have entered a VS, a start date a project name. It could also check that if you have entered a completion date you also enter review loops. This could be in large red text so it is obvious to someone completing a card that they have not yet filled in all necessary data.
View 9 Replies
View Related
Mar 22, 2014
I am a beginner in VBA programming and I have to make a Userform for entering data in the specific places(in a table) in the worksheet. But when I enter a number, it changes all the cells to that number. I can't find my error.
View 7 Replies
View Related
Nov 23, 2011
If I have 3 text boxes textbox1, textbox2 and textbox3
I want ot be able to enter a time in textbox1 and then a time in textbox2 and textbox3 would give the difference. i.e. 09:00 17:00 then textbox 3 would calculate 08:00
Then all 3 times would automaically be entered in Sheet1 A1,B1 and C1
View 9 Replies
View Related
Jun 27, 2014
I have 4 text boxes in a user form where user type numbers. At the end i have another text box(yellow one) that adds these numbers using this code.
[Code]....
In another text box(grey one) user types another number. Then using this code
[Code] .....
I try to add the values of the two previous text boxes. I get wrong result when i use decimals numbers and i can not understand what is wrong.
Attached File : add text boxes.xlsm
View 7 Replies
View Related
Aug 3, 2014
I have a spread sheet that is populated via a Userform. I have arrived at a problem where I don't know how to write the Code so as to Skip Column B i.e.
Column A Column B Column C Column D Column E Column F
Serial
ID
List of Activities
Owner
Environment
Planned
Start
Planned End
1
HQ DLC0001
Campaign Plan
HQ DLC
28-Feb-14
18-Jul-14
From the text Box I fill Serial, List of Activity, Owner Environment, Planned Start, Planned End.
Column B - ID - Is a unique ID that is created via a formula.
How can I add a line to the code below so that the User form skips Column B and only places the in putted data into Columns A, C, D, E and F.
VB:
Option Explicit
Dim id As Integer, i As Integer, j As Integer, flag As Boolean
Sub GetData()
[Code] ......
View 1 Replies
View Related
Jan 17, 2012
I have a user-form with around 10 text-boxes. Each one of them has labels.
I was wondering if there was any way to add a function similar to the "insert-> comment" available in excel? So that there would be a tiny marker and when the mouse hoovered over it, some text in a comment bubble would be revealed? Or even better that somehow using VBA that each time you enter a text-box a comment would temporarily appear?
For a variety of reasons I can't just add labels with this info. This info would be instructions on what sort of data you should add to the field, and the instructions in some cases will be quite long and the user-form is too big as it is.
View 3 Replies
View Related
Mar 24, 2014
I have a combobox that is referenced to a named list 'ListReels'. There are only 8 choices (Reels 1 -8), and each has an accompanying worksheet in the workbook. The user selects a reel, then inputs other information. When an 'Enter' command button is clicked, I had like the data to be entered onto the next available row of the worksheet with the same reel name (eg, if reel 2 is selected from the combobox, then the data should be added to the Reel 2 worksheet on the next blank row.
View 4 Replies
View Related
Feb 21, 2007
I have a spreadsheet and within the first sheet there are lots of hyperlinks to other cells within sheet 1 (my template).
I have made a small macro which very basically makes a copy of sheet 1 (my template)
The hyperlinks in the template are explicit and as they are copied to sheet two, they still reference back to cells in sheet 1. I need the hyperlinks to be relative, so that when I make a copy of the template the hyperlinks are copied and make reference to cells in the new sheet. I cannot work out how this should be done
View 6 Replies
View Related
Jun 27, 2013
Code:
With wshfma
lr1 = 0
.Range("K2:N15").ClearContents 'early late staff rowsource
.Range("C2") = Format(hwmin1, "h:mmA/P") 'text!
With .Range("D2")
.Value = (.Range("C2"))
.NumberFormat = "general"
End With
Cell C2 of worksheet 'fma' is populated by a value linked from a textbox in a userform. It is a time value in text format (eg "8:30P").
This snippit of code is to populate cell D2 of worksheet 'FMA' with the value in C2 (8:30P), and apply the general number format to it. (I know redundant ... but this is just testing).
What is happening though, is cell D2 is actually being populated with the contents of another cell ... F3 to be exact.
View 3 Replies
View Related
Aug 16, 2006
This does almost exactlly what I want. The one problem that I have is that the active cell remains B1 as it enters the formula in the rest of column B. I need it to refer to the row that it is entering the formulas; meaning each formula entered in B2,3,4, etc. is still referencing cells A1 & D1 for sBook & a sFilePath.
Dim sBook As String
Dim sFilePath As String
Dim sLen As Long
Range("B1").Select
sBook = ActiveCell.Offset(0, -1)
sFilePath = ActiveCell.Offset(0, 2)
sLen = Range("A1").End(xlDown).Row
Range("B1").Formula = "='" & sFilePath & "[" & sBook & ".xls]Sheet1'!R1C1"
Range("B1", Cells(sLen, 2)).Formula = Range("B1").Formula
View 4 Replies
View Related
Apr 6, 2009
i've been using an IF function in order to display a certain value when one or more criteria are met in one cell in one specific worksheet. here's how it looks like:
=IF(OR(ISNUMBER(SEARCH("value1",Worksheet1!A1)),ISNUMBER(SEARCH("Value2",Worksheet1!A1))),"yes","no" )
with different values and names.. but it's just to give you the idea of what kind of function it is. this one works perfectly, but i also needed another one in which the logical test range is no longer only one cell, but more, thus a selection. i wrote the same formula, but instead of the "A1" i wrote for example "A1:A20" which i thought it would work.. but it doesn't. even more surprising, when i open the insert function (the helping wizard that pops up when i click the "fx" button on the left of the function string) and i put in the logical test, at the bottom of the window it says the correct result (ie: yes). but on the actual worksheet, the cell displays the wrong result (no). i know there are no errors in the formula, so i really don't know how to solve the problem.
View 10 Replies
View Related
Dec 7, 2009
In some of my formulas, I need to re-enter the contents of the cell in order for a formula to compute.
For example, I am doing some math on a cell whose original contents are "10:21:00 AM" The formula returns a #NUM!. If I retype 10:21 in the cell and hit enter, the formula will now calculate properly. I have reformatted the entire column several times so that it is a custom hh:mm format. The original content also shows as time so I don't think that it is a formatting issue.
My worksheet has about 20,000 rows and this only happens for about 100 of the rows. It is pretty time consuming to manually go fix each one. Any ideas what is going on here?
View 6 Replies
View Related
Nov 28, 2007
I'd like to add items on a UserForm1 ComboBoxes in the correct order but I can't. That's because with the code below, in ComboBox6P1 the items are added with mixed order:
For Each thing In .Range("AC6", .Range("AC65536").End(xlUp)).SpecialCells(xlCellTypeConstants)
If Trim(ComboBox4P1.Text) = thing.Value Then
For Each aNew In .Range("AD6", .Range("AD65536").End(xlToRight)).SpecialCells(xlCellTypeConstants)
If aNew.Row = thing.Row Then
ComboBox6P1.AddItem aNew.Value
End If
Next
Exit For
End If
Next
I should add items in ComboBox6P1 in order -> AD6, AE6, AF6, AG6, AH6, the rest are empty cells. Instead of it adds AF6, AG6, AH6, AD6, AE6. When I change .SpecialCells(xlCellTypeConstants) to .SpecialCells(xlCellTypeVisible ) it adds it in the correct order but with another 200 emtpy cells in the ComboBox6P1. The format of the cells is General.
View 9 Replies
View Related
Jul 10, 2014
I have a macro (Photo_Hyperlinks2) that creates a hyperlink for every file found from a specific folder in Column A of Sheet 1.
The rest of Sheet 1 is my long version of doing what I want the macro to do... place the hyperlinks at the right spot. Sheet "Checksheet" makes a hyperlink of the already made hyperlinks (from Sheet 1) ONLY if the hyperlink in Sheet 1 is found. Same goes for the hyperlinks (1), (2), (3), and (4).
I really want to get rid of having to create a Sheet 1. I'm pretty sure there's a way to tell a macro to place the hyperlinks that contain "id" and/or "est" on the right row number in sheet Checksheet, and that if that row (in Checksheet Sheet) contains a (1) -(4), put it in the right cell, while also ommiting the first part of the name (ex: from 123445E(1) to (1)) ; I can live without that part if it can't be done.
Sheet "Checklist Using C-G Columns" shows the hidden columns not seen in Sheet "Checklist". Those manually inputed numbers are there mainly to tell that if more than 1 of the cells on the row are filled out, then to create a new row below it, and to continue the hyperlinking with (5), (6)... etc.
The final product is supposed to look like Sheet "Ideal Checksheet", except that ideally links (5)... etc. should work, and columns C-G are hidden again.
View 4 Replies
View Related
Feb 28, 2012
I want to be able to have two separate hyperlinks in one cell. First, is it possible?
Code:
=IF(SETUP!$C$7="Lean",HYPERLINK("#'CORE SYNERGISTICS (LEAN)'!C6","Core Synergistics"),
AND(HYPERLINK("#'CHEST & BACK'!C6","Chest & Back"),HYPERLINK('AB RIPPER X'!B7,"Ab Ripper X")))
View 5 Replies
View Related
Jan 5, 2007
Earlier this morning I had a telephone call from a customer who uses a spreadsheet I created.
She explained that once she'd entered information into a cell [and clicked elsewhere] she couldn't then add to the former; rather, she had to click on the cell and type it all out again.
I assumed that, as an inexperienced excel user, she was unware of either double-clicking the cell, or selecting and pressing F2. I explained these methods to her.
She later emailed me with this:
"Further to our phone conv this morning I have just tried double-clicking on cells but it deletes everything in the cell rather than lets you edit what is there – F2 does the same thing. This applies to any cell, whether it is text, date or number."
I've been using excel for a while now, and I've never come across such a thing before.
Has anyone else? Could it be to do with her own excel settings? (other customers have had no such problem)
View 9 Replies
View Related
Mar 16, 2007
What I'm trying to do is enter a value/text into a cell - say (A1). After I enter the value/text I would like to have a new tab populated with all the information on the current sheet and the tab name referencing cell A1. I tried running a few different scenarios using macros and have come up short. I want to be able to do this multiple times with different values/text. For example if I enter B606123 into cell A1 I want a tab to be created named B606123. Then later I might want to add B606096 and have that created without effecting B606123.
View 3 Replies
View Related
Apr 8, 2009
I want to convert a range of cells to "number" format from text, and then refer to them in a formula that's somewhere else. However, if I do the format from VBA, I can't get the change to be reflected without the following
View 4 Replies
View Related
May 29, 2009
In one column (Column A) I have a column of data which contains long descriptive text - i want to extract a specific piece of text from this descriptive text and enter it into the next Column (Column B).
E.g. Cell A1 = "Hello Buddy, how are you?" - i want to extract the word Buddy and enter it into cell B1
then A2 into B2, A3 into B3, etc, etc,...
Is there a simple macro out there that can do this?
View 7 Replies
View Related
Jun 26, 2013
I would like my hyperlink destination to move with the original cell (like links do) if I insert or delete a row above. The destination is on a separate sheet within the same work book.
View 3 Replies
View Related
Jul 9, 2009
I'm attaching an example.. Basically I am using Hlookup to bring some data over from another tab. Is it possible for the data coming over (in this case a brief description) to also bring the hyperlink that's associated with it. In other words I want someone to put in the code P5 which is Proof Load Test. When they put in P5 Hlookup will post the description of what P5 is in the cell below. Then from there I want the user to beable to hyperlink from the description to get to the summary located on a different tab..
View 5 Replies
View Related
Jun 16, 2013
Any way to have multiple hyperlinks to various files in one cel?
I want to the hyperlink to change based upon information entered in which i want it to copy an address from another sheet using the VLookup command.
View 3 Replies
View Related
Sep 22, 2007
I've set up a macro to create around 50 http links (sites which i need to monitor every week but whose addresses change slightly every month)
I've also got a macro to open up all these web pages at once so I can look at them in internet explorer.
When these links are nicely created into cells the http link isn't recognised straight away by excel (e.g. doesn't go blue & underlined) until i click in the cell & change or return the cell value - as part of the autocorrect function i think.
Is there a way of getting excel to automatically recognise the http links without having to go individually into every cell.
View 6 Replies
View Related
Feb 6, 2014
i have 5 lists of names which i want the sheet to enter depending on the cell value of C1. C1 is a drop down of 5 different departments so when C1=department 1 for instance i want A4:A25 to automatically update the list of names that i have against that department.
im sure its fairly simply but i just cant get any formula i use to work!
View 6 Replies
View Related
Oct 29, 2013
I have been looking for a way to enter the folder where the excel file is located into a cell.
I have seen you can add the whole path (=CELL("filename") ), however I am only wanting the 'last' folder it is in. For Example:
C:docsfolderdataClass D4John WayneProfile.xlsx
Would enter "John Wayne" into cell. The cell is namely the "name" cell.
I work in a school and a teacher is wanting a couple of different excel files for each student (600 students) I am hoping that I can put the files in a folder with the students name as the folder. That way at least its only 600 names and not 600x7! The other details are similar on a lot of the files such as class (this is also one of the folders in the path).
View 3 Replies
View Related
May 29, 2014
I have worksheet that contain values in column E and G and the total in column K. E and G are unlocked for manual input and column K contains the formula for the total and is locked. From time to time a certain row will not be applicable and before I started locking the cells in column K i would just put "not applicable". Now that it's lock I can't do that. My only option now is to put O in column E and G but I would rather put "not applicable" in column K. Is there a way around this. I was thinking of something along the line of a macro that would unlock the worksheet input the text and re lock it. The macro would have to lunch when a locked cell is selected or have a button that would launch the macro an would prompt for which cell the text would be entered. Is this possible.
View 7 Replies
View Related
Feb 2, 2014
0: i have a sheet 1 protected and few edit range (Col A,B,C,D,E and F).
1: I have a validation on multiple adjacent columns (like Col A, Col C, Col E).
2: I need a code where if i select value in col a (cell A2) cell B2 should get current date and Time and both the cells (A2 and B2) should be locked. when i select data in cell C2 , D2 should get current date and time(Cell C2 and D2 should be protected).
3: User can enter data in A3 and B3 will get current date and Time (now A3 and B3) should be locked.
4: I need a function where user can call it and unlock the locked cells and edit the data and re-lock the cells again.
apart from the Col A,B,C,D,E and F, other columns and cells remain locked.
View 2 Replies
View Related
Mar 4, 2014
I have a requirement to enter 25 formulas into 25 different cells. The formula is this:
[Code]......
The only thing that changes is the cell reference at the end which goes up in increments of 20,000, i.e. R20000, R40000, R60000, etc.
I have this set up and it works fine. My question is whether there is another quicker way rather than have the above code repeated 25 times?
View 5 Replies
View Related
Mar 1, 2012
Having the cell protected after entering the data. From the below table, i need when a date is entered and moved to next cell, the cell which contains the data should be protected. I need to this for the comments column as well.
Number
DateStart timeEnd TimeActual Time takenComments
123459132546132156135469654814846543
View 1 Replies
View Related
