This does almost exactlly what I want. The one problem that I have is that the active cell remains B1 as it enters the formula in the rest of column B. I need it to refer to the row that it is entering the formulas; meaning each formula entered in B2,3,4, etc. is still referencing cells A1 & D1 for sBook & a sFilePath.
Dim sBook As String
Dim sFilePath As String
Dim sLen As Long
1. Have a COUNT value in a cell (counted the number of rows with values in them). 2. A formula that needs this value (sums another set of values in another column that has the same number of rows).
Example: the COUNT value is 12, and is located in cell G5.
For simplicity sake I have a formula in cell I5 SUM(F1:F12).
Instead of directly referencing F12, I want the formula to be SUM(F1:F(G5)).
I've got an issue where Formulas Referencing Cells on another sheet are getting changed automatically to refer the the moved cell data. The formulas on a sheet (2) refer to specific cells on sheet (1) within my workbook. I update Sheet(1) data with a macro. When sheet (1) updates, the present data gets shifted to the right.
In other words, I need to prevent the formulas from changing to reference the moved data values and keep referencing the initial cell with the new values. xample of change that occurs with update:
I am working on a sheet called 2005, with "Jan" entered into cell C4. I want to reference cells on the sheet called Jan2005 using a function that points to C4 and adds "2005".
I have a series of worksheets, named, 'sheet1' 'sheet2' etc. through to 'sheet10'. A final worksheet, 'sheet11' has been produced that uses the formula: address=Sheet1!A1, address=Sheet2!A1, address =Sheet3!A1 etc. The same goes for other identical cells on each of the sheets. I am at the moment entering each cell on 'sheet 11' separately because if I copy the formula down it progressively changes the cell value and not the sheet number. How can I produce a formula whereby the cells remain identical but the sheets change progressively?
I want to set a conditional format to cell A1 with a value in cell P1 When the value in P1 is between 0 and 10 the conditional value in P1 should be set.
Note
cell A1 is also set with a conditional format to put a border around it when there's a value in A1 (cellvalue is not equal to " ") So the formula referencing P1 would be a second condition.
I have a document that I created that has merged cells. In order to autofit the rows of this document, I referenced the merged cells in singular cells that are not visible to the users of the document. (They are not hidden)
It had been working relatively nicely, but now the autofit function is not working correctly. If I copy and paste values into the cell it will work, but this would not be my ideal solution. I have tried playing with the number format, which works for the most part if I set it to "&" - text. It doesn't work for some longer cells with line breaks in them.
I want to use the values in a range of cells in a sheet for a formula in another sheet. The problem is that these range of cells already has formulas and when I select these cells for use in another formula, the values doesn't get picked up and my formula doesn't work. for example -
cell L4 in sheet 1 has a formula - ='H:VK_2011_onwards1_ACC_BJS_SAA 6 and it has a value - 34.76
cell L5 in sheet 1 has a formula - ='H:VK_2011_onwards1_ACC_BJS_SAA 6 and it has a value - 47.09
Now I want to use this two cell to calculate an average in sheet 2. So if I use the formula =AVERAGE(Sheet1!L4:L5). I get no result.
I have the following formula: IF(SELL_INVESTMENT = "YES" , 1,2) It returns not 1 or 2 but 0. The worksheet contains over 1000 cells. Trace Precedents verifies that the formula evaluates the correct cell and that it contains "yes". I created a very simple worksheet to test the formula and here it correctly returns 1.
The formula below was written a couple of years ago and I just discovered an error. It returns an "S" for the value 0789 when it should be a "C", (Consecutive).
******** ******************** ************************************************************************>Microsoft Excel - FL MID PLAY 4 CONSECUTIVES.xlsm___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutT215=OPQRST215078907893SSheet2 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I am trying to determine if I can write a formula that will read text in one cell, such as insurance and if true enter the amount from another cell and if false then 0. I have tried a IF statement by add the text to name manager. However, the answer is 0 rather than the amount in the selected cell. I might need to use a different formula or function.
I can't seem to tell if my formula isn't correct in concept, or if this is a known problem with Excel 2000?
I have written a short formula that is pretty straightforward, but is giving a different result in Excel's "Formula Editor" box (when you hit the = button) than is showing in the cell itself. The Formula Editor's result is showing as "TRUE" which is what I believe is the correct value, but the cell itself is showing the "FALSE" result of a different incorrect value.
In cell A1 is 13.00, the result of a formula. In cell A2 is the formula =IF(A1>14.00,True,False) The result of this formula is TRUE In cell A3 is the formula =15-A1 The result of this formula is 2
why the formula in cell A2 would evaluate to the wrong conclusion? All cells are formated as numbers.
I have a spreadsheet, with a Match Formula, that appears not to work. It looks at cell F1, and scans through cell C2:C14, and want it to return the relevant row in Column B (My work network will not allow me to upload the file). Cell F1 is the name of the sheets within the workbook (one for every month). However my data currently only has Apr - Jun, but when I choose month May, the formula feturns Month June.
I am using the formula: LOOKUP(A1,{"S","M","L","XL"},{"S","M","L","XL"}) on a cell containing: EF-2147.(S) so that it will return a S [or M, L etc. if it were .(M),.(L)] but it just keeps returning #N/A. I tried putting in "(S)" etc. in the lookup formula but it then started returning the wrong letters.
I am trying to use FIND and an array formula to find the position of text in a range of cells (A2 and A3 in the example) which could be one of a number of options (C1:D1 here). But the array formula throws up the following error: "A value used in the formula is of the wrong data type". The simplest illustration of the problem is as follows. The formula in B2 is
Code: {=FIND(($C$1:$D$1),A2)} and $C$1:$D$1 contain REF and ATM respectively. [/CODE] REF ATM 203047 05AUG 08.55 OKEHAMPTON ATM #VALUE! CO-OP GROUP 380611 REF 191 7553375222 BCC 22
We see that B2 has a #VALUE! error - wrong data type. But for some reason B3 is ok returning 22!
Code: With wshfma lr1 = 0 .Range("K2:N15").ClearContents 'early late staff rowsource .Range("C2") = Format(hwmin1, "h:mmA/P") 'text! With .Range("D2") .Value = (.Range("C2")) .NumberFormat = "general" End With
Cell C2 of worksheet 'fma' is populated by a value linked from a textbox in a userform. It is a time value in text format (eg "8:30P").
This snippit of code is to populate cell D2 of worksheet 'FMA' with the value in C2 (8:30P), and apply the general number format to it. (I know redundant ... but this is just testing).
What is happening though, is cell D2 is actually being populated with the contents of another cell ... F3 to be exact.
My workbook is for financial planning but I'm attempting to streamline an input page (name, birthdate, etc) that will be referenced throughout the entire workbook to trigger automatic calculations (present value, education calculations, etc).
The cell in the input page is a birthdate - which when populated will trigger a cell on a different worksheet to calculate the respective age using this formula:
The problem is if there is nothing written in the birthdate cell then the age cell will automatically calculate 114 (reference photo below). Ideally I'd like that cell to be blank if nothing is in the birthdate cell on the input worksheet. I'm assuming since I'm using an IF formula to calculate the age already then I'll need to use a macro to to an "ignore".
I'm putting together a userform and all the values and ending up in the correct place except for the two hyperlink cells.
I think it is because I've got the anchor wrong but Im not sure how to correct. I'll put the whole form in so if there is something fundametal going wrong in the early stages I can be put right, but the hyperlink issues are down the bottom at the Offset 16 and 17.
VB: ' Write data to worksheet RowCount = Worksheets("Resources").Range("A2").CurrentRegion.Rows.Count With Worksheets("Resources").Range("A2")
i've been using an IF function in order to display a certain value when one or more criteria are met in one cell in one specific worksheet. here's how it looks like:
with different values and names.. but it's just to give you the idea of what kind of function it is. this one works perfectly, but i also needed another one in which the logical test range is no longer only one cell, but more, thus a selection. i wrote the same formula, but instead of the "A1" i wrote for example "A1:A20" which i thought it would work.. but it doesn't. even more surprising, when i open the insert function (the helping wizard that pops up when i click the "fx" button on the left of the function string) and i put in the logical test, at the bottom of the window it says the correct result (ie: yes). but on the actual worksheet, the cell displays the wrong result (no). i know there are no errors in the formula, so i really don't know how to solve the problem.
I'd like to add items on a UserForm1 ComboBoxes in the correct order but I can't. That's because with the code below, in ComboBox6P1 the items are added with mixed order:
For Each thing In .Range("AC6", .Range("AC65536").End(xlUp)).SpecialCells(xlCellTypeConstants) If Trim(ComboBox4P1.Text) = thing.Value Then For Each aNew In .Range("AD6", .Range("AD65536").End(xlToRight)).SpecialCells(xlCellTypeConstants) If aNew.Row = thing.Row Then ComboBox6P1.AddItem aNew.Value End If Next Exit For End If Next
I should add items in ComboBox6P1 in order -> AD6, AE6, AF6, AG6, AH6, the rest are empty cells. Instead of it adds AF6, AG6, AH6, AD6, AE6. When I change .SpecialCells(xlCellTypeConstants) to .SpecialCells(xlCellTypeVisible ) it adds it in the correct order but with another 200 emtpy cells in the ComboBox6P1. The format of the cells is General.
I have a long list of amounts one per day. Sun-Sat repeating. I Total the amounts for each week and place it next to Sun. now i have the total for that billing week.
I need to reference these numbers from a different sheet that only has one row per week. I tried to do ='sheet1'!a2 then next row down ='sheet1'!a9 and ='sheet1'!a16 etc then fill down but when i do it seems to start again and do a3, a10 and a17.
Is there a way I can get it to only use cells with figures in them? IE if cell is empty then move down one else use the amount in cell... or how do I get it to reference 7 cells below each time rather than the next immediate cell.
I have the formula: =VLOOKUP(C10,'[Ticket Out Comparison Report.12.4.11.xls]TO'!$C:$O,10,0)
I want to do something like putting 12.4.11 in cell B1 and change the formula to something like: =VLOOKUP(C10,'[Ticket Out Comparison Report.B1.xls]TO'!$C:$O,10,0)
I'm having an issue with a formula that references another workbook, and I'm not sure what the culprit is.
The formula is this: =IF(ISERROR(E4/VLOOKUP(D4,'C:Documents and SettingsusernameMy DocumentsRoom Capacity Master List.xlsx'!Table2[#All],2)),"",E4/VLOOKUP(D4,'C:Documents and SettingsusernameMy DocumentsRoom Capacity Master List.xlsx'!Table2[#All],2))
It works just fine on the initial pass. When I reopen the book and it prompts if I'd like to update the data, and I select yes, everything goes away. Cells E4 and D4 are both part of a PivotTable, not sure if that is important or not. This is happening on Excel 2010 running on XP.
Just got a problem with auto-populating cells with a formula that is made up of variables. My formula references the cells on another sheet, but this will be dynamic.
I'm trying to get the formula to reference e.g. cell A1 in the Calls Taken sheet, with the column held in the srtshortname variable and the row held in the formularow variable.
I am having trouble with the following formula in my workbook with many sheets: ="='"&MONTH(A6)&"-"&DAY(A6)&"'!"&"$B$13". I entered this formula into B6 of the current sheet. Cells A6:A33 contains a date (02-Jan-07). So what I'm trying to do is retrieve the value in B13 of the sheet corresponding to the month and day in A6. If I hard code this formula into B6 ='1-2'!$B$13 it works but I don't want to edit each of the formulas in column B to correspond to the correct sheet. When I type in the above concatenated formula it just returns text (='1-2'!$B$13). Is there a way to do this so the formula will actually execute?
