I would like my hyperlink destination to move with the original cell (like links do) if I insert or delete a row above. The destination is on a separate sheet within the same work book.
View 3 Replies
The problem is when I highlight a row with some color the original color of the row is gone, so I tried this code, and again, it's removing the original format and color for the row This is the code from McGimpsey & Associates : Excel : Highlight row with background colors
Code:
PrivateSub Worksheet_SelectionChange(ByVal Target As Excel.Range)
Const cnNUMCOLS AsLong=256
Const cnHIGHLIGHTCOLOR AsLong=36'default lt. yellow
Static rOld As Range
Static nColorIndices(1To cnNUMCOLS)AsLong
Dim i AsLong
IfNot rOld IsNothingThen'Restore color indices
[code].....
How can I retain the range's historical color so that when I deselect the row it reverts properly?
i would like to be able to move files from one folder to another then delete the original files.
I dont think im passsing the variables to the functions corectly.
I have a spreadsheet and within the first sheet there are lots of hyperlinks to other cells within sheet 1 (my template).
I have made a small macro which very basically makes a copy of sheet 1 (my template)
The hyperlinks in the template are explicit and as they are copied to sheet two, they still reference back to cells in sheet 1. I need the hyperlinks to be relative, so that when I make a copy of the template the hyperlinks are copied and make reference to cells in the new sheet. I cannot work out how this should be done
Within Worksheet_BeforeDoubleClick, I have the following simple code extract that sets the appropriate autofilter to the correct value (and highlights a couple of cells for clarity) when a particular cell is double-clicked...
If Not Intersect(Target, Range("C10:AQ11")) Is Nothing Then
If Not Intersect(Target, Range("C10:D11")) Is Nothing Then
Selection.AutoFilter Field:=10, Criteria1:="C"
Range("C10:D11").Interior.ColorIndex = 36
End If
You'll be happy to hear that the event works as expected.
However I would like to add the following enhancement: after Worksheet_BeforeDoubleClick completes the "double-clicked cell" is selected, is it possible for the "original" cell to be re-selected once the event completes?
I have a workbook with 7 sheets. Each sheet has about 9 different macro buttons that are repeated all over the sheet in various locations. I want to return automatically to the sheet and cell that was last active before running a macro.
View 2 Replies View RelatedI'm trying to make cell values in a range change so they appear blank when a checkbox is checked, and when it is unchecked, I need the original value to appear. I have the following so far:
Private Sub CheckBox1_Click()
If CheckBox1.Value = True Then Range("BTS").Value = ""
End Sub
...However I do not know how to change the cells back to the original value before it was made blank.
At my work we are using Excel as a CMS to produce SQL scripts for insertion into a database. The data is then turned into mobile web pages. This involves multiple workbooks - 1 for each main page with the sub-pages as extra worksheets in the book.
Much of the data is duplicated so we have created master workbooks then copied them and laboriously referenced the relevant cells back to the original. That way if any data in the master is changed, all copies will change simultaneously.
This is obviously not the most efficient way of publishing web pages but we are stuck with it for now. So I am wondering if it is possible to write a VBA code to create a copy of the master and then reference all required tables in the worksheets automatically? The tables are all named ranges.
I want to use the text to columns function when the original cell has more then one line (lines are separated with Alt+Enter). Somehow Excel does only notice the first line.
cell A1:
Bookrunner: Lehman Brothers;
Mandated Arranger: CapSource Financial Inc;
Participant: Citibank NA
(After the ";" is an ENTER)
And i want it to be like this at the end:
Cell A1:
Lehman Brothers
Cell B1:
Bookrunner
Cell A2:
CapSource Financial Inc
Cell B2:
Mandated Arranger
Cell A3:
Citibank NA
Cell B3:
Participant
I have a workbook where I have columns requiring entry from A to AD. I have set conditional formatting in column A to show a colour if there is an entry in column AD. I would like to use a macro to always freeze panes in column D (to show the data in the first 3 columns) and the macro would then show column AD in the other frozen pane/split.
As there will always be an entry in column A but not always in column AD I want to be able to select any highlighted row in column A , run the macro and the cursor will be showing in column AD on the same row ( relative reference?) thus showing the entry in AD next to the other info in columns A, B and C.
At the moment I have a macro that unfreezes my header row and is set to always choose the "next empty cell" but I don't know the code to change it to get what I want. Currently if I select any entry in column A e.g. row 100 and run the macro I find the cursor showing in AD2! Of course I would like to run another macro to return back to A on the same row too.....
I have a macro (Photo_Hyperlinks2) that creates a hyperlink for every file found from a specific folder in Column A of Sheet 1.
The rest of Sheet 1 is my long version of doing what I want the macro to do... place the hyperlinks at the right spot. Sheet "Checksheet" makes a hyperlink of the already made hyperlinks (from Sheet 1) ONLY if the hyperlink in Sheet 1 is found. Same goes for the hyperlinks (1), (2), (3), and (4).
I really want to get rid of having to create a Sheet 1. I'm pretty sure there's a way to tell a macro to place the hyperlinks that contain "id" and/or "est" on the right row number in sheet Checksheet, and that if that row (in Checksheet Sheet) contains a (1) -(4), put it in the right cell, while also ommiting the first part of the name (ex: from 123445E(1) to (1)) ; I can live without that part if it can't be done.
Sheet "Checklist Using C-G Columns" shows the hidden columns not seen in Sheet "Checklist". Those manually inputed numbers are there mainly to tell that if more than 1 of the cells on the row are filled out, then to create a new row below it, and to continue the hyperlinking with (5), (6)... etc.
The final product is supposed to look like Sheet "Ideal Checksheet", except that ideally links (5)... etc. should work, and columns C-G are hidden again.
I want to be able to have two separate hyperlinks in one cell. First, is it possible?
Code:
=IF(SETUP!$C$7="Lean",HYPERLINK("#'CORE SYNERGISTICS (LEAN)'!C6","Core Synergistics"),
AND(HYPERLINK("#'CHEST & BACK'!C6","Chest & Back"),HYPERLINK('AB RIPPER X'!B7,"Ab Ripper X")))
I'm trying to create a VBA macro that will allow me to copy a formula from one sheet to another whilst keeping all the original references.
E.g.
If the formula on Sheet1 is:
= sum(A1:B6)
then the copied formula on Sheet2 would read
=sum(Sheet1!A1:Sheet1!B6)
You can do this by cuting the cell, but I don't want to do this, I want to leave the original cell unchanged.
I'm sure there is some simple VBA code to do this, but I can't seem to figure it out.
See attached worksheet for reference. Is it possible (while utilizing the same spreadsheet on a weekly basis) to zero a spreadsheet subsequent to its use. Importantly however, all relevant formulas must remain perfectly intact and will re-establish themselves once relevant data is placed inside an individual cell? In this case, as soon as a “Name” (or even a letter) is referenced inside the “Name” column: H10:H19?
In other words, the entire sheet is blank bar the top date and respective headings. Once any text is placed inside cells H10:H19, the formulas from the associated Row re-applies itself to the “Week-Start” dates, “Week-End” dates and references a default “Phone” amount for ‘$10’? The Data Validation formulas I’m sure would remain undamaged? This would prevent ‘text clutter’ (such as dates extending to the bottom with no apparent referencing or connecting information?
Wanted to know if there is a macro that can copy the selection of cells and paste it as a formula with original cell refernce.
For Example :
Copy Selection Cells - Say Cells A1 B1 & C1
and Paste It as formula In Cell D1 as =A1+B1+C1
I'm attaching an example.. Basically I am using Hlookup to bring some data over from another tab. Is it possible for the data coming over (in this case a brief description) to also bring the hyperlink that's associated with it. In other words I want someone to put in the code P5 which is Proof Load Test. When they put in P5 Hlookup will post the description of what P5 is in the cell below. Then from there I want the user to beable to hyperlink from the description to get to the summary located on a different tab..
View 5 Replies View RelatedAny way to have multiple hyperlinks to various files in one cel?
I want to the hyperlink to change based upon information entered in which i want it to copy an address from another sheet using the VLookup command.
I've set up a macro to create around 50 http links (sites which i need to monitor every week but whose addresses change slightly every month)
I've also got a macro to open up all these web pages at once so I can look at them in internet explorer.
When these links are nicely created into cells the http link isn't recognised straight away by excel (e.g. doesn't go blue & underlined) until i click in the cell & change or return the cell value - as part of the autocorrect function i think.
Is there a way of getting excel to automatically recognise the http links without having to go individually into every cell.
I'm putting together a userform and all the values and ending up in the correct place except for the two hyperlink cells.
I think it is because I've got the anchor wrong but Im not sure how to correct. I'll put the whole form in so if there is something fundametal going wrong in the early stages I can be put right, but the hyperlink issues are down the bottom at the Offset 16 and 17.
VB:
' Write data to worksheet
RowCount = Worksheets("Resources").Range("A2").CurrentRegion.Rows.Count
With Worksheets("Resources").Range("A2")
[Code]....
I have a spreadsheet that I have various formulas and sheets. To simplify:
Sheet 1: Columns A & B have Name and Code Number. I can add additional names and code numbers to these two columns whenever necessary.
Example:
Tom 874
John 385
David 712
Hidden in adjoining columns are formulas to automatically sort them via Code Number. Next to that are the columns showing the sorted information, sorted by number.
John 385
David 712
Tom 874
Additionally, I have a seperate sheet for Tom, John & David. Since I put Tom in first, he's Sheet 2. John is Sheet 3, and David is Sheet 4. I can use hyperlinks so when I click on John, it goes to Sheet 3; David Sheet 4; Tom Sheet 2.
Now, let's say I add Kevin 192 to the next row. The hidden columns are set up so that it'll automatically resort Kevin to the top, with John, David & Tom in the next rows down.
The issue I have with the hyperlink is that it's cell specific, not content specific, as far as I know. I would like the hyperlink to move with John's info so that it would still go to Sheet 3. Same with David and Tom. Unfortunately, after the resort, If I clicked on Kevin's name (which is now at the top of the list), it would go to John's sheet, since the hyperlink is attached to that cell.
How to allow a hyperlink to remain with the content, versus the cell? I would prefer it to be not a macro, but I'll take a macro over nothing!
A list of stock symbols runs down one column. In the next column runs a list of the corresponding companies.
The companies are linked in the following fashion: http://www.smallcapinvestor.com/quotes?symbol=ug
For the above example, "ug" is the stock symbol for the company United Guardian.
My question:
Is there a way to insert the text of a cell into a hyperlink? For example, how would I achieve this logic in Excel: http://www.smallcapinvestor.com/quotes?symbol=[CELL CONTENTS HERE]
I have a spreadsheet of various works-in-progress items, the first three columns of which refer to relevant documents, effectively the request, the estimate and the work order, i.e. RXXX-0001, EXXX-0001 & WXXX-0001.
So the text is entered as above (without file extension as it's also our reference number), and I'd like each to be linked to their respecive .doc files, which are held in different locations, i.e. \servernamefolderRequests or Estimates or Work Orders
e.g. \servernamefolderRequestsRXXX-0001.doc
There's a backlog of over 300 items (so 900 links) so I don't want to go through and manually create the links and as each day can see over 12 items being created it'd be much easier to have it done at the click of a button
Most of the solutions I've seen involve creating a new cell/button with the hyperlink in it - I just want to effectively "right click, create hyperlink" but with the cell contents inserted as the file name (adding ".doc") and with correct folder name too.
FYI the cells are adjacent to one another e.g. A1, A2 & A3 so the selection can be Offset (0,1) for the estimates and work orders.
I don't mind if it ends up being a case of running the macro on each line - some links have already been created already.
I pulled a set of financial statements from a database into Excel. All of the values are hard coded but I would like to make them dynamic, while maintaining the original content. For example, If cell C3 is a revenue figure for 2012 ($1,000) I would like to link it to cell C5, which will be a currency conversion rate (2.0). So I would like cell C3 to read =1000*C5, which would equal 2000, and for cell D3 to equal 2013 sales*D5, etc. I would also like this to go across a specified range so that I can also change operating expenses, taxes, etc over a number of columns (dates) that I define, all linking to the conversion rate for the given year. Having another tab where you link and anchor is an option but I would prefer something in VBA where I can qickly include this functionality with new workbooks that I download.
I am using Excel 2010.
how can I change the following code so that the cell background colour remains the same. the below code unlinks the hyperlinks but deletes the backgroundcolour also of all the cells.
Code:
Private Sub Button3_Click()
ActiveSheet.Hyperlinks.Delete
Range("A7:W100").Select
[Code].....
Creating email drafts with the use of VBA in excel.
I've used some of his code to create an email draft to send a particular range within my excel spreadsheet. The trouble I'm having with it is keeping the hyperlinks within each cell in the range which will take the user to a particular website. How do I keep this formatting when the range is copied into the body of the email.
Example Cell A10 = HYPERLINK("URL","Google")
The hyperlinks are lost. How to keep these? Here is the code
Sub Mail_Selection_Range_Outlook_Body()
Dim rng As Range
Dim OutApp As Object
Dim OutMail As Object
Set rng = Nothing
On Error Resume Next
Set rng = Range("EmailRange")
[Code] ........
When I use the mouse pointer to select a cell I can't use the arrow keys to move to another cell while the pointer is over the cell and I can't edit the cell while the pointer is over the cell. If I move the pointer away from the cell then I can move around and edit as normal therefore I don't think this is a scroll lock issue.
This issue also happens when I select a tab. If I select a tab and then leave the pointer over the tab I selected then I can't use the arrow keys to move around the worksheet or edit a cell; if I move the pointer away from the cell then I can move around and edit as normal.
I am using MS Excel 2010.
i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies View RelatedI know this is a sooo basic question but I can not for the life of me remember how.....
when I am on a excel sheet I can not seem to move from quare to square qiththe arrow keys.
It just now takes me all the way to the left or all the way to the right and not from cell to cell from left to right.
I know its something rather simple yet I can not seem to figure this out.
I have no problem with this on 2003pro.
I require a macro to enable a selected shape to be moved from current cell location to relative position but 1 row up. eg topleft address = A4 and shift shape to topleft address = A3
View 5 Replies View RelatedI want to extract the following details into another collumn (bold ) from data in column B1 into C1. The information i want begins with 3 digits with a '/' then other digits follow.
M / AS308 - :308/65588 POUN
S33 / 33 - :133/01504 TR
NI101 - :101/915635 T
N101 - :101/915635
