If I have 3 text boxes textbox1, textbox2 and textbox3
I want ot be able to enter a time in textbox1 and then a time in textbox2 and textbox3 would give the difference. i.e. 09:00 17:00 then textbox 3 would calculate 08:00
Then all 3 times would automaically be entered in Sheet1 A1,B1 and C1
I have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies View RelatedI am a beginner in VBA programming and I have to make a Userform for entering data in the specific places(in a table) in the worksheet. But when I enter a number, it changes all the cells to that number. I can't find my error.
View 7 Replies View RelatedIf I use format cells and choose time... do I have to enter the time in decimals to get it to show up like 1:30 PM? Or is there a way for me to type something quicker like 130 p?
View 9 Replies View RelatedI'm putting together a userform and all the values and ending up in the correct place except for the two hyperlink cells.
I think it is because I've got the anchor wrong but Im not sure how to correct. I'll put the whole form in so if there is something fundametal going wrong in the early stages I can be put right, but the hyperlink issues are down the bottom at the Offset 16 and 17.
VB:
' Write data to worksheet
RowCount = Worksheets("Resources").Range("A2").CurrentRegion.Rows.Count
With Worksheets("Resources").Range("A2")
[Code]....
I have a spread sheet that is populated via a Userform. I have arrived at a problem where I don't know how to write the Code so as to Skip Column B i.e.
Column A Column B Column C Column D Column E Column F
Serial
ID
List of Activities
Owner
Environment
Planned
Start
Planned End
1
HQ DLC0001
Campaign Plan
HQ DLC
28-Feb-14
18-Jul-14
From the text Box I fill Serial, List of Activity, Owner Environment, Planned Start, Planned End.
Column B - ID - Is a unique ID that is created via a formula.
How can I add a line to the code below so that the User form skips Column B and only places the in putted data into Columns A, C, D, E and F.
VB:
Option Explicit
Dim id As Integer, i As Integer, j As Integer, flag As Boolean
Sub GetData()
[Code] ......
I have a user-form with around 10 text-boxes. Each one of them has labels.
I was wondering if there was any way to add a function similar to the "insert-> comment" available in excel? So that there would be a tiny marker and when the mouse hoovered over it, some text in a comment bubble would be revealed? Or even better that somehow using VBA that each time you enter a text-box a comment would temporarily appear?
For a variety of reasons I can't just add labels with this info. This info would be instructions on what sort of data you should add to the field, and the instructions in some cases will be quite long and the user-form is too big as it is.
I have two excel file name as A.xlsx and B.xlsx. Avoiding double work if I entering the production data in A.xlsx , need to automatically display the same data in B.xlsx. Let me know how the entered data in A.xlsx automatically display in another excel file B.xlsx.
View 1 Replies View RelatedI have created a time sheet and I would like to know if there is a way to auto-lock cells after time is entered so that it cannot be changed. As of right now I have employees enter the time by using Shift+Ctrl+;, so the exact time is recorded, however employees can write in whatever time they want. so I guess what I want to do is 2 things:
1- can the cell be formatted to only accept Shift+Ctrl+;, so that the exact time is entered in the cell and prevent employees from entering times they were not at work?
and
2- can the cell auto-lock after Shift+Ctrl+; is entered so that they can't modify the time sheet the next day if they arrived earlier than the day before?
I have a combobox that is referenced to a named list 'ListReels'. There are only 8 choices (Reels 1 -8), and each has an accompanying worksheet in the workbook. The user selects a reel, then inputs other information. When an 'Enter' command button is clicked, I had like the data to be entered onto the next available row of the worksheet with the same reel name (eg, if reel 2 is selected from the combobox, then the data should be added to the Reel 2 worksheet on the next blank row.
View 4 Replies View RelatedI'm using a formula to copy a time from one cell to another
across sheets. The format of the time is h:mm AM/PM.
However, when the formula references an empty cell, it puts in a
default value of 12:00 AM and I need it to remain blank, (just as
the referenced cell)
It's such a simple copy formula. ie:
=sheet1!A1
e-mail... howard<dot}coakleyatcoakley<dot].codotuk
Skype ID: howie10 (get skype from www.skype.com)
I am trying to create/modify an XY scatterplot using VBA.
I declare local variables and point them to the chart and a new data series for the chart, such as:
Dim chartone As Chart
Dim chartseries As Series
Set chartone = ThisWorkbook.Charts("Chart1")
chartone.ChartType = xlXYScatterLines
Set chartseries = chartone.SeriesCollection.NewSeries()
I set the series data, using an array, such as:
chartseries.Values = Array(1, 3, 5, 7, 9, 11)
I can set the Xvalues to a set of dates by setting .Xvalues to a woksheet range that includes date-formatted data. (like this):
chartseries.XValues = Worksheets("sheet3").Range("m9:m14")
(where m9:m14) contains dates...
I am writing a module which have a different test based on for each of the previous 2 column cells. It calculate the days passed or in simple way calculate the date difference for the 2 columns and puts them in third. But i need to use a inputbox for entering the first date for monday of the month each time i use the worksheet.
When i try using the module for each cell of the column it display the input box for each cell. is there any way so that i just enter the value in input box and it can be used in rest of the module.Without using it again and again.
I have a userform that has a time field on it and then the userform displays the time as a number.
Ex. I entered 11:00 AM in the Time of Contact field and the form displays it as 0.458333333333333.
I have a userform that time stamps on my userform as soon as i open the form, is there a way that when I submit, that the amount of time that I was on the call to be put in my column on my worksheet as minutes?
View 2 Replies View RelatedHow do i calculate the time between 22:00hrs and 08:00hrs without entering a date? Is this possible or do i need to enter a date?
View 9 Replies View RelatedI am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
I am trying to put together a userform based time card calculator. User inputs the time in the time out and how long of a lunch. Then the program will display total hours worked for the day. Ive attached what I have so far. The only thing that is not very clear is that I have one hidden textbox for the lunch. It is there only for calculating and the visible one is going to inc by :15 min.
View 9 Replies View RelatedI have a userform that has a text box. If user puts a number in it and click on proceed the userform must expand and display that many comboboxes. for e.g. if user inputs 8 and then click on proceed then there should be 8 comboboxes on the form. Is it possible to do?
View 4 Replies View RelatedI need to compute the total time in a userform.
I have a userform where:
1. User enters a start and end time Start1, End1 (23:00, 01:00)
2. The time difference is calculated and displayed in Total1 (2:00)
3. User enters Start2, End2 (22:00, 22:50)
4. Time difference calculated - display in Total2 (00:50)
5. Grand total of Total1, Total2 is displayed in GrandTotal (2:50)
The user will input the times as 0000 but I need to convert the entry into a time format. (User enters 1235 - I need it to covert to 12:35)
I am trying to transfer data from a worksheet to a user form, so that the end users can edit the data on the user form, save it, and the revised data is sent back to the worksheet. since the worksheet data is dynamic, i am trying to dynamically add controls in the user form. but the form displays only one data.
Set sdel = Sheets("Deliverables")
Set rStartCell = sdel.Range("A65536").End(xlUp).Offset(0, 0)
counter = Mid(rStartCell.Address, 4)
dummy = 0
cnt = 1
'copy data from sheet to the user form
With sdel
'checking if deliverables sheet has any data
' If .Range("A3") <> " " Then Exit Sub
' MyTextBox.Caption = .Range("A3").Value
For r = 3 To counter
If .Cells(r, 1) <> "" Then
Set MyTextBox = Controls.Add("Forms.Label.1", "lbl" & cnt, Visible)
MyTextBox.Top = topadd + 30
MyTextBox.Left = 20
MyTextBox.Width = 150
MyTextBox = .Range("A" & r).Value
cnt = cnt + 1
Else
dummy = dummy + 1
End If
Next r
End With
I have a timesheet, with a custom format of [h].mm. In my userform, I have a textbox which I would like to use to enter a time in, but when I run the macro, the time shows up correctly (such as 0.12 for 12 minutes), but it is still calculating as text. I've tried all the various codes I have found throughout the board but nothing has worked so far. I can get as far as making 0.12 minutes show as 12.12.00 AM, but then it shows the whole time instead of the 0.12 which the cell is formatted to do and does not calculate it at the bottom where I grab all the times from that column.
View 1 Replies View RelatedI have made a UserForm with 12 buttons on it to switch between 12 different Worksheets and I am attempting to have the button pressed down only when the sheet is active. The buttons all work fine and go to the right sheet, but will stay toggled when I click on a button for another sheet.
I have tried to create a seperate macro that makes all the ToggleButton.Value = False, but this just activates the ToggleButton_Click() macro each time and loops on and on. Is there a way to change the value of the toggle without initiating the click subroutine? Do I even want to use ToggleButton?
I have 30+ Textboxes on the form.
In the process of entering data the textBoxes get different .BackColor settings.
When the reset command button is hit the boxes stay the same colors, so I could reset them with a single command rather than 30+ lines of formatting code.
I know how to do this in a worksheet: =(b1-a1)*1440. B1 being the end time and A1 being the start time. I have a userform where the start time and end time are entered in text boxes. txtstart1 and txtend1. I would like the result to show up in txtmin1. Here is my code that doesnt work. I tried to convert code from a non-time sheet of mine. Dim as Integer may be the problem, I just learn as I go, and so far have only dealt with Integers.
View 4 Replies View RelatedI've got a userform which I'm developing (my first) and I have two textboses:
Textbox6 = start time & Textbox7 = end time & Textbox10 which contains the calculation (Textbox7 - Textbox6).
Now I have code that works great for normal numbers however I need to be able to make the calculations in TIME (hence the start time / end time).
How I can amend this code to be able to calculate total time between textbox 7 and Textbox6.
Private Sub TextBox6_Change()
If TextBox6.Value = "" Then Exit Sub
If TextBox7.Value = "" Then Exit Sub
TextBox10.Value = CDbl(TextBox6.Value) - CDbl(TextBox7.Value)
[Code] .......
Is there a way to use a userform and hidden sheets at the same time?
I want to limit the access to the information through a userform but my userform requires me to unhide the userform to show. Is there a way to go around this? Because the information might be misused if the user can simply close the form and have access to the information in the sheet.
I'm getting a 'Run Time Error 91' saying that 'Object Variable or With Block not set'.
Error lies here:
Code:
Me.lstCategpry.Column = CustRec.GetRows(Fields:=Array("name"))
Userform Initialize:
Code:
Private Sub UserForm_Initialize()
[Code].....
I would like to add something to my workbook which, when called, gives you current time in Tokyo, Australia, USA, London, Europe (for example).
I am trying to work out what would be best.
Would it be possible to create this on the Status bar?
Alternatively, i guess a Userform shown as modeless (but i am not sure if the controls holding the times will update.
I am trying to use the Date and Time Picker 6.0 and I have add it to the userform and named it DateofContact.
When I play the userform I get a error stating:
"Compile Error-Method or Data member not found"
Below I have added the code and it shows in red where the problem is.
Private Sub UserForm_Activate()
PSA.Text = Cells(lCurrentRow, 2).Value
cboTypeofContact.Text = Cells(lCurrentRow, 3).Value
DateofContact.Text = Cells(lCurrentRow, 4).Value
TimeofContact.Text = Cells(lCurrentRow, 5).Value
End Sub
I am not sure what to put in its place.