I have written an IF formula that only clacluates the first IF values in the formula and I dont know why.
Here is my formula: =IF(I2999;"1000";IF(I2>1999;"2000";IF(I2>2999;"3000";IF(I2>3999;"4000")))))
So if in I2 I have the value 800 it correctly returns
Sample stock system LOADTESTING.xlsm has ten products. "LoadTesting" shows the opening stock for each. CSV file "Van Sales" has the Stock Number in Col M and the sales figure in Col N. I want the code to Open a CSV file "Van Sales" (which for some reason the site would not upload) Establish the sum total sold for each product (VBA equivalent of SUMIF) Deduct that sum for each item from the opening numbers on "Van Sales" (e.g. Product 001 started with 156 on the van, 92 were sold, so the "revised" van figure should be 64).
Can't get the code to link to the right "ranges" from the Van Sales workbook.
(You will have to change the file path calling the Van Sales file, but if you do get it to work,
VB:
Option Explicit
Sub GETSALE()
Dim Dest As Range, Dest1 As Range, Dest2 As Range, Dest3 As Range, oCell As Range, varResult As Variant
[Code].....
I have an entire row of if statements that basically check other sheets if a number occurs. If it does then it will display "Pending Approval" ,"Open", or "Closed" depending on which sheet the # appears on .. Just wandering if their was a better formula for this..
View 7 Replies View RelatedI need a formula to calculate the sum of a range of rows.
Example:
If rows 1-10 have a width of 12.75 each, and rows 11-15 have a width of 15.5 each. I need a formula to tell me that the sum of the widths of rows 1 to 15 is 205.
Any idea?
I have the following formula:
=TEXT(D2-C2-TIME(,60,),"[h] h
s: m mi
s")
It's taking out 60 minutes for lunch. Now I want to use this to calculate straight time and not deduct any time. How can this be modified?
I'm trying to make a worksheet that calculates monthly residuals. For example, if I have income of $275 in the first month and then the next month I have the first $275 and an additional $275, and so on. I've created the following formula
=RC[-1]+(RC[-1]*2)+(RC[-1]*3)+(RC[-1]*4)+(RC[-1]*5)+(RC[-1]*6)+(RC[-1]*7)+(RC[-1]*8)+(RC[-1]*9)+(RC[-1]*10)+(RC[-1]*11)+(RC[-1]*12)
where RC[-1] is the base amount that adds on every month. This gives me the number I am looking for. However, I am wondering if there is an easier way to do this.
If I have a worksheet that has a figure when the program calculates, how do I set up in another worksheet so that it tells me how many pages to print (that has information based on the 1st spreadsheet).
View 9 Replies View RelatedExcel 2003 SP2
--------------
I have been programmatically setting the formulae in a worksheet. I have various formulae:
Example 1 - =COUNTIF(Data!M$6:M$9871,3)/$E$4
The cell is formatted Percentage, 2 decimal places.
Using the formula evaluator the value returned is 56.80%
The cell displays 56.80%, all is good!
Example 2 - =SUM(IF(Data!$J$6:$J$9871=$D8,IF(Data!$M$6:$M$9871=3,1,0)))/$E$8
The cell is formatted Percentage, 2 decimal places.
Using the formula evaluator the value returned is 53.37%
The cell displays 0.00% !?!
Column C contains zip codes.
Column D contains # of adults in the household.
Column E contains # of children in the household.
How might I create a formula that calculates a total # of adults AND children in Columns D and E based upon a series of specific zip codes (but not all the zip codes) in Column C?
The whole document works but the last one i need. I'll post it all just in case i have an error elsewhere.
Start Time -- Stop Time -- Break -- Total -- Hours Worked -- Average -- Pay
6:00 -------- 3:00 ------- Yes ---- 1600 -- 8.00 ----------- 200 ------ $xx.xx
E2 Formula for time: =IF(C2="Yes",(((A2*24+12)-(B2*24+24))+1),((A2*24+12)-(B2*24+24)))
F2 Formula for average: =D2/E2. and now for the problem one. G2 Formula for pay: =IF(F2<165, E2 * 7.25, IF(F2<180, D2 * 0.07, IF(F2<190, D2*0.08, D2*0.09)))
Just to break that formula down more:
0 - 164 = 7.25 * Hours Worked
165 - 179 = 0.07 * Total
180 - 189 = 0.08 * Total
190+ = 0.09 * Total
it only calculates 7.25 by the hours worked no matter what comes up in F2
The Excel file is in this link
[URL]
If you look at the chart on the left, it breaks down how this whole thing works. It takes the sum of the numbers that fall within each line. I wrote it out on column M so that it's more clear. In column D-L, I filled in random numbers ranging from 4000-700. The numbers in those gray boxes are ignored. This Macro should only apply to Column M and beyond. Is it possible to write a macro that will be able to do this?
using Office Professional Plus (2013). Within my spreadsheet, I have a series of progressive dates to be used in as a timeline. Ultimately, what I need to accomplish is that when I change one date, all the proceeding entries update according to my timeline criteria (in this case 3 weeks or 21 days). I created a SUM formula that worked but only calculated one time. Once the calculation completes, the cell drops the formula. I need this to be constant as the dates often change. How do I get the formula to maintain? Further more, is there a better method to accomplish the task at hand other than the SUM option?
View 7 Replies View RelatedI am having an issue creating a formula that calculates % of Budget based on signs. What I mean is positive budget, negative actual and vice versa. Here are all the cases. Can someone please create a formula that I can copy down.
Actual Plan% Budget
85,60696,85188.4%
70-82185.9%
-1,530-3,786247%
-100100-200%
Is there any formula that could calculate total average number of recruitment days (i'ts one number), but only for "Diana" and "Skipper" (excluding "Jennifer")?
Please see an example:
Recruitment daysResponsible
12Diana
13Diana
19Diana
16Skipper
23Jennifer
[Code] .....
I guess it has something to do with AVG and IF formulas.
I need a formula that calculates the total rent amount for particular dates. Example would be a formula that includes a date starting at the first of the month (October 1, 2009 to September 30, 2010) and also would include a date starting at a date later than the first (October 3, 2009 to September 30, 2010). The figures needed would be the monthly rent (ex: $1,000) and a pro rated rent amout for a lease that starts after the first of the month. The pro rated amount would also have to include the years with a leap year. I have been working on this but I know there has to be an easier way.
I have a column that calculates & displays the number of minutes between two cells, i would like to conditonal format the column to either display a 2-color scale by number, min 0 and max 40 or i would like to apply a fill to all cells > 40. I can do this with normal numbers typed into the cells but i cannot get it to work with the result of the formula. I have tried formating the cells to number but still i cannot get it to work.
View 3 Replies View RelatedI am trying to set up a spreadsheet which automatically calculates the start and end dates of project tasks, by looking at the order in which tasks need to be completed. I have attached a spreadsheet to show what I am trying to do.
View 3 Replies View RelatedI have an excel spreadsheet which calculates the count and value of line items based on a report. I use the sumproduct function to calculate this as it involves multiple criteria. The formula is use is
SUMPRODUCT(('Report 50'!$C$2:$C$64992= Dashboard!$B172)*('Report 50'!$H$2:$H$64992=Dashboard!G$2)*(LEFT('Report 50'!$S$2:$S$64992,14)="credit transfe")*('Report 50'!$L$2:$L$64992=15))+SUMPRODUCT(('Report 50'!$C$2:$C$64992=Dashboard!$B172)*('Report 50'!$H$2:$H$64992=Dashboard!G$2)*(LEFT('Report 50'!$S$2:$S$64992,14)="credit transfe")*('Report 50'!$L$2:$L$64992=19))
I think the possible error is coming out of this criteria (LEFT('Report 50'!$S$2:$S$64992,14)="credit transfe")
Out of one particular field i am picking those line items in which the first 14 characters are "Credit Transfe", if i eliminate this criteria i dont get error.
But this is the main criteria for my calculation. Most of the time i dont get any error , but sometines i get the # Name Error? When i double click on the cell it goes to one column. I dont know what to do from there.
heres the data: [url]
Im meant to produce a simple spreadsheet that calculates the floor area of a new build city centre hotel. The developer is looking at various plots of land that allow differing sizes of floor plates and storey heights. The key variables are the number and type of bedrooms, number of floors and whether the hotel is classed as a premium or budget hotel.
I need to produce a spreadsheet that shows the key variables and the total calculated floor area at the top of the sheet.
I'm trying to write a code that calculates 2nd column based on 3rd column's number or vice versa based on the condition set on the 1st column. Below, there are two procedures. "SimpleCalc" and "SimpleCalc2". I first wrote SimpleCalc2, but it isn't working, so I worked around the error by writing SimpleCalc, which selects a cell and moves around by offset. I personally find it hard to read and error prone as I develop more logic around it.
I'm trying to develop more function based on this code, so I need to make it neat and flexible. what I'm doing wrong in SimpleCalc2? Or do you have any suggestion to improve the code "SimpleCalc"? I'm using Excel 2003.
Sub SimpleCalc()
Dim SimpleMethodRng, SimpleMethod As String, i As Integer
ActiveWorkbook.Worksheets("Dashboard").Range("P5").Select
SimpleMethodRng = ActiveWorkbook.Worksheets("Dashboard").Range("N5:P12")
For i = 1 To 8
SimpleMethod = SimpleMethodRng(i, 1).........
I'm having trouble using the worksheet copy command in a VBA subroutine. I have the following line in my code:
[Code] ........
When I step through my code and execute this line, the sheet is copied as expected and put in the correct place, but then instead of the next line of code being highlighted, the pointer jumps to the first line of a function (in a different module) in my code.
Another interesting dilemma to solve. Using this formula:
View 2 Replies View RelatedFunction Haversine has correct value in debugger but in cell it has the same value as Haversine2. Is this a known bug?
Public Function Haversine(lat1 As Double, long1 As Double, lat2 As Double, long2 As Double) As Double
Dim temp As Double
[Code]....
In Mr Excel's Pod Cast on April 12th, he showed how to use the OFFSET function to define a range inside a SUM function. Then he had Conditional Formatting that would highlight the range that was being summed. Can anyone tell me what the formula would be inside the Conditional Formatting dialog box to get the OFFSET range to have a certain format?
View 9 Replies View RelatedI have a function
VB:
Function f1(Matrix As Range)
'Does something and returns f1 = a double
End Function
And a second function which defines and constructs a matrix of doubles to use as an argument in f1 to return a double:
VB:
Function f2(dD As Double)
Dim MatrixRed() As Double
Redim MatrixRed(1 To dD, 1 To 10)
For i = 1 To dD
For j = 1 To 10
MatrixRed(i, j) = i * j
Next
Next
f2 = f1(MatrixRed)
End Function
I get an output error (#VALUE). I think it has something to do with MatrixRed not being a range anymore?
let me start by saying that I know an example workbook would be useful here, but the part I'm struggling with is the [managementroster.xlsm] file, and there is A. no way I can release it to the internets and B. its so huge/complicated I couldn't even begin to reproduce a portion of it, scrubbed of data, and hope to maintain its functionality in a meaningful manner.
[Code]....
This formula checks a staff number on this spreadsheet, and then goes and looks at the staff number on the roster. Once found, it returns that staff members roster, but changes any manager codes in the MRC list to Mgr, and changes all other roster codes to Free.
I now need this formula, before altering roster codes to Mgr or Free, to only return codes that are a match for another table (or after really. I don't particularly care, so long as only codes are shown that match data from another table). I think an index/match function would do the trick, but this forumula is already at the edge of my excel ability, nesting another function within it is completey beyond me. The relevant cells for the index/match function would be:
This first Match function targets the column. $E3 is the date required, $BA$1:$DN$1 is the range the dates are entered in
Match: Lookup value = $E3
Lookup array = '[ManagementRoster.xlsm]Vacancies!'$BA$1:$DN$1
match type = 0
This second Match function targets the row. $A$4 is the department name, $B$434:$B$452 is the range where all departments are entered
Match: Lookup value = $A$4
Lookup Array = '[ManagementRoster.xlsm]Vacancies!'$B$434:$B$452
match type = 0
Index: array = $BA$434:$DN$452
So I think my final function is
[Code] .....
But I have absolutely NO idea where it would fit within my first formula, or how to code it so that my original formula only reproduces results that are found in both sheets, or anything.
I have created a List in excel of various tasks. (See attached example.) Each row contains one cell with a function which equals the cell above it and to the right. So the function for cell C3 would be D2. The only importance is that the cell mirrored is always the cell one above and to the right. However, now I would like to be able to rearrange this List, but the “one up and to the right” function will now be all over the place.
Is someone aware of a function which will target a relative location instead of an exact cell?
I keep getting the "You've entered too many arguments for this function" error.
Here is the formula:
=IF(B15=D40,E40,"",IF(B15=D41,E41,"",IF(B15=D42,E42,"","Invalid Shipping option")))
I am trying to nest an IF function with a CEILING function. If C10 is < 3.5, make it 3.5, however, if C10 > 3.5, CEILING (C10, 5)
right now it looks like:
If (C10
I have been looking around have this much code from this site, modified. What I am trying to do is calculate numbers by a position with cells D through K having numeric values. I have 'hardcoded' the cells (D2, E2, etc in the code below), but in reality I only want the current row (so if the formula is on the 2nd row, I want D2, if it is on the 3rd row, I want D3).
My problem is obviously the formula isn't working because I am not correctly tying back to the spreadsheet (Positioncalc.xls). When I put the formula in the spreadsheet it works, but in my script I get 0 everytime.
My Script:
Function Position(rCell As Range, Optional RightPosition As Boolean)
Dim vResult
Select Case rCell.Text
Case "QB"
vResult = (2*D2) + (2*E2) + (2*F2) + (4*G2) + (2*H2) + (1*I2) + (4*J2) + (3*K2)
Case Else
vResult = "Invalid Position"
End Select
If RightPosition = True Then
Position = vResult
Else
Position = "Position not valid"
End If
End Function
So, when I put =Position(A2,True) I expect to see the formula results of those cells calculated based on the position (QB, HB, etc with their unique formulas).
My next challenge after this is to highlight certain cells based on the Position. So if A2 = QB, I want cell D2 boldface and Red, etc. I have seen some scripts on colors and such here, so I might be able to figure it out.