If a cell is blank, what is the formula that can be used to place a 0 in that spot if the spot is empty. Also, what is the formula to leave a spot blank if no data can be pulled for its formula (to get rid of a #DIV/0! error).
View 9 RepliesI am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI am completely stumped and spent over 20 hours trying to figure out this problem. There are a ton of examples on the net on how to do this using code, not using code, etc. I have attached the sample of what I have been able to do so far.
In this example I have used the non code approach. Using Name Lists to assign pictures, I was able to get this to work, the problem is that I would have to create hundreds of name lists to get it to work on all cells, unless I'm missing something.
If you look at Column C - I basically want to assign a picture instead of the word relating to the color in Column A. As you can see in the sample I was able to get this to work, but as I mentioned I would have to literally create hundreds of lists to do it across Column A,D,F,H, etc.
I can't seem to get this If statement to return an empty cell It returns 0
HTML Code:
=IF(+B7+C7="","", +$C$3-B7+C7)
The formula will go in D7
If either B7 or C7 is empty, leave D7 empty
If either B7 or C7 has a value, add or subtract from $C$3
How would I write an IF Then Statement to test if a cell is blank? (meaning it could have "Div/0!", text, 0, or "n/a".)
View 4 Replies View RelatedI have a problem with finding the right function. My goal is to have the following function...
The cell D1 has the following function: [=IF(B1<=C1;"YES";"NO")] But I would like to have the cell D1 to be left blank, if the cell A1 is blank.
I have a conditional IF statement, where I want the content of the cell to be blank if the result of the IF statement is false, ie I want the content of the cell to be as if there were no formula in the cell (this if so that the formula COUNTA(Sheet1!$B:$B) only counts the cells where the result is TRUE).
For example, IF(A1=1,1,"") where A1 1, the content of the cell will have something in it (a space), and won't be blank.
I need to sum cells that contain this formula: =if($c$5=0,"",c5*b5). I am getting a wrong data type value error.
View 7 Replies View RelatedI have a nested if statement that doesn't give a blank cell when it is evaluated. The cell is general formatted but results in a '0' in the cell instead of a completely blank cell.
If statement is:
=IF('Sales info'!B16="",'Sales info'!B6,IF('Sales info'!B6="","",'Sales info'!B16))
Why is this giving me a 0?
I am after a macro to do the following, my visual basic skills are very limited (non existant):- Look at the date in cell A1 on Sheet 'Live Report' and err 'remember it' Copy a range of cells from A3 to A10 on 'Live Report' Go to sheet 'Monthly Summary' and find the date that had been remembered previously (this date will be in column A on 'Monthly Summary' which will probably be a mixture of values and formulas). After the date has been found paste special and transpose the 'values only' copied range from 'Live Report' (A3 to A10) in column B on 'Monthly Summary' next to the date that has been found in Column A.
View 2 Replies View RelatedI am trying to write a statement as follows. IF CELLK11 IS NOT VALUE BLANK AND F11=BLANK THEN TRUE = 1 FALSE = 0.
View 3 Replies View RelatedI'm trying to figure out if an employee is in probation period or not. I have this formula in S3 =IF(TODAY()-R3>90, "No", "Yes"). I need to leave S3 empty if no value in R3 (R3 contain hiring date)
View 2 Replies View RelatedI've got four columns of data. The first column contains pricing for a bunch of products from our company. The other three columns contain pricing for three other competitors. So for example:
Product | Our Price | Comp1 Price | Comp2 Price | Comp3 Price
Gloves | $4.59 | $5.00 |$6.00 | $3.56
Hats | $5.00 | | | $4.59
In column G right after Comp3 Price I have an IF statement that says if Comp1 Price is less than Comp2 Price, Comp3 Price, and Our Price, to print "Comp3" in that cell. If it is not less than the comparable data, then check Comp2 Price then Comp3 price in the same fashion. If Comp1, Comp2, or Comp3 is not less than Our Price then print "My Company Name." This will allow me to see who has the lowest price for that product and also tell me if that lowest price is lower than our price.
My problem is that I can't get it to work out so Excel ignores blank cells. So for example, Comp3 has the lowest price amongst our competitors for hats and is also lower than ours. But when I check for Comp3 price being lower than Comp1 and Comp2, it comes back as negative because Excel sees those cells as zeroes even though they're blank. My formula is:
=IF(AND(C2<D2,C2<E2,C2<B2),"COMP1",IF(AND(D2<E2,D2<C2,D2<B2),"COMP2",IF(AND(E2<C2,E2<D2,E2<B2),"COMP 3","MYCOMPANY")))
This would do exactly what I need Excel to do if it would ignore the blank cells. The problem is that Comp3 has pricing for hats because they offer hats, but comp1 and Comp2 don't offer hats at all, so naturally Comp3 has the lowest price; however, according to Excel Comp1 and Comp2 have the lowest price because the cells are blank and counted as zeroes.
So, does anyone know how to work this out so Comp3 will be counted as the lowest price for hats, ignoring the blank cells of Comp1 and Comp2?
=IF($T$50=Controls!$B$2),"GO",IF(AND($E$52=3,Controls!$B$3=1.3,$U$1=8,$AB$1>=Controls!$B$2),"GO","")))
Why do I get a FALSE statement with this formula when T50=1, i want it to be blank.
Amount Amount Item Total Account
$ -
No Profit$ 629.50 $ - $ 629.50 No Profit$ 46.29 $ - $ 46.29 No Profit$ 2,333.01 $ 233.30 $ 2,566.31 233.3
$ -
No Profit
$ -
No Profit
$ -
No Profit
$ -
No Profit
#1 If there is an amount in column B, I want column D to reflect that amount.
#2 If there is no amount in column B, I want column D to state the words "No Profit."
#3 Already in column B is the formula =C1-A1.
I tried =IF(B1=0,"No Profit",B1) but when I copy that formula down the spreadsheet, it inserts "No Profit" into all of column D. I only want "No Profit" to exist when there is a $0 resulting from the formula mentioned in point #3. When there is a blank cell in column D, I want it to remain blank until an amount is entered in that row?
I've got a work book (2010 btw) with several tabs.
On tab 5 is an inventory list with "Stock Number and Nomenclature" merged in row A7-Q7 and down to row A23-Q23.
Beside each Item there are “Required Quantities (EA)" in Colum U7-U23. After an inventory is executed, The values are placed in Colum V7-V23 (INV).
Stock Number Nomenclature EA Inv
34419-43450 Mission Modu 1 “X”
After inventorying.... I need a formula that "compares the required quantities (EA) to the actual inventoried values (X)".
IF the actual inventoried quantities are equal to or greater than "Required Quantities" - Display Nothing in tab 6
IF the actual inventoried quantities are LESS than the "Required Quantities" - Display “Stock Number and Nomenclature" in tab 6 for a shortage list, ignoring the "blank cells".
I have a macro that imputs data from an external database and puts it into a temporary worksheet. This data has 3 columns (ID, Date, Amount). I am then making another sheet which has X number of tables (one for each ID), with the years being the column headings, and months being the row headings. ie.
| ID X
| +------+------+------+--->
| | 1999 | 2000 | 2001 |
+------+------+------+------+--->
| Jan | $100 | $250 | $300 |
+------+------+------+------+--->
| Feb | $200 | $300 | $200 |
+------+------+------+------+--->
| Mar | $300 | $250 | $100 |
+------+------+------+------+--->
| Sum | $600 | $800 | $600 |
| +------+------+------+--->
| ID Y
| +------+------+------+--->
| | 1999 | 2000 | 2001 |
+------+------+------+------+--->
| Jan | $100 | $250 | $300 |
+------+------+------+------+--->
| Feb | $200 | $300 | $200 |
+------+------+------+------+--->
| Mar | $300 | $250 | $100 |
+------+------+------+------+--->
| Sum | $600 | $800 | $600 |
| +------+------+------+--->
Currently I have a few hidden fields for the DSUM Criteria. I start making the tables. And then filling in table based off of the month and year. Doing so I need 3 criteria:
>= First Day of the Month
<= Last Day of the Month
= ID #
The problem is it takes Excel too long to fill in the 3 criteria fields, calculate the result, copy the result, and place it into the correct place on the table. Is there another way to get this data into the correct tables faster? Instead of using DSUM?
I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies View RelatedHow do I do this?
View 3 Replies View RelatedI need to place cell value into one function (I cannot modify this function it is built in) .
For example:
Function is
CODE
A2=KGF
=ABCDFE_(my value of A2 thus KGF)_GHIJKL
Thus the end result:
=ABCDFE_KGF_GHIJKL
I can concatenate the string but I cannot evaluate it .
=CONCATENATE("ABCDFE_",A2,"_GHIJKL")
is there a way to do it ?
Is it possible to place Text in a Cell if a CF is True?
So Far I am unsuccessful.
I have this CF in Column S
=IF(ISBLANK(R10346),"Need Dept & Cat")
Not using VBA is there a way to take the worksheet name and place it in a cell?
I use Excel 2002 - I have a column with Text in its cells. The cells usually range from 30 to 130 characters including spaces. I need to use word wrap.
I would like to be able to see where the 55th character is ( Including spaces ) - but I also need to see the rest of the contents of the text in the cell.
I have thought about coloring the first 55 character/spaces ?
or inserting a character at space 56 ? Example below
XXXX XXX XXX
XX XXXXX XXX
XX XXXX XXXX
XXXX XXX XXX
XXX XX~XXX X
XXXX XX
I was wondering if anyone knows code that will check to see if there is a certain value in a cell, and if there is place a "1" in another cell in that row.
View 2 Replies View RelatedI am wanting to put a "1" in ROW 2, starting with COLUMN B until the sum reaches the value in cell A3.
Example: I have 10 in A3, I would like the macro to place a "1" in B2-K2.
I would like to be able to add one decimal place to each cell in my range.
Example:
111.111 becomes 111.1110
22.22 becomes 22.220
3.3 becomes 3.30
There are no standards here, I just want to be able to add that last decimal place. I need cells to remain in "Number" format also.
Place the actual date in a cell. Here is my code
View 2 Replies View RelatedMy userform has text that corresponds to my spreadsheet header. I would like to replace the text with a textbox so my headers are variable. code that will allow me to enter my text so when I click enter
View 9 Replies View RelatedUpon user making selection from data validation list in Active Row Selection & Column A : i would like to do the following (is possible)
,,,,,,,,,,,,,,,
Place formula in Active Cell Row & Column S
=MT4|BID! (followed by cell A1 but replace the "/" with "") followed by "m"
I have tried several combinations but with no success.
Also - where would i place this code so that it automatically updates the formula in Column S as soon as the user changes selection in Cell A?
Is someone knows how to place the mouses pointer at specific location on the worksheet, at the end of macro run?
I would like to add VBA code in macro of a Commad Button, that can do that.