I have a conditional IF statement, where I want the content of the cell to be blank if the result of the IF statement is false, ie I want the content of the cell to be as if there were no formula in the cell (this if so that the formula COUNTA(Sheet1!$B:$B) only counts the cells where the result is TRUE).
For example, IF(A1=1,1,"") where A1 1, the content of the cell will have something in it (a space), and won't be blank.
I am trying to make the contents of a cell into a chart title.I know I can do it like this...
ActiveChart.ChartTitle.Select
Selection.Caption = "=tab_name!R2C1"
However, I am trying to use the same macro on several different tabs in the same EXCEL worksheet. Obviously, I can't have the tab name in the macro. But, I don't get a title at all when I try to remove it like this...
ActiveChart.ChartTitle.Select
Selection.Caption = "=R2C1"
or
ActiveChart.ChartTitle.Select
Selection.Caption = "=A2"
Is this possible? I am (kinda new at) using EXCEL2010.
I have a spreadsheet with about 1000 rows. This is data that I've imported from another source and there are blank rows scattered throughout. I am trying to add columns together, but when I cut and past the sum formula, I end up with a 0 in a cell that should be blank. I've tried various iserror, isblank, isnull, empty functions, but am still getting a 0.
Here my example of one function I've tried:
a b c
1. 50 50 50 =if(isblank(a1:c1)," ",sum(a1:c1)) 150
2. 20 20 20 =if(isblank(a2:c2)," ",sum(a2:c2)) 60
3. =if(isblank(a3:c3)," ",sum(a3:c3)) 0
I would like that zero answer in row 3 to be blank otherwise I have to manually go through all the rows and delete these 0's out or cut and paste the sum function just on the rows with numbers.
Im currently writing a payroll sheet within excell and trying to write an IF statement to make a cell blank if referring to another blank cell but it is showing the formula is incorrect. Below is the following IF statement that im using;
=IF( F4 <97, AM4*0.8, IF( F4 >=97, AM4*1.1, IF( F4=" ";" "; AM4)))
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI need to create a formula which will change the contents of the cell to one of 3 options based on the value of another cell
For example if I was using B2 as the cell to reference I need to say IF B2 = 0 then say "Closed", IF B2 = 1 then say "Open" and if its any other value then say "Error".
I'm having some trouble having all 3 if statements nested correctly.
I don't want to do this as a macro just as a formula.
IF statement that looks at a cell to see if it contains a word.
ie IF A2 has " Total" in it then do this
i am trying to automate altering a DAT file. Basically, each line of data in the DAT file contains an entity name, an account name, and a value. for some of the accounts, i need to change the entity name. for all other accounts, i can leave the entity name alone. if i copy the DAT file into Excel, and use text to columns, how can i create a macro to compare the accounts to a range of cells containing a list of the accounts i need to alter the entity name for, and then change the entity name if there is a match?
the account does not need to match perfectly, the accounts i input only needs to contain the reference account. the list of accounts and the entity name i need to change to are in cells on another sheet. i thought about doing a loop to run through each line of data, but i am not sure how to do that.
I am trying and failing to write an if statement in excel (not vba) to check the contents of cell H3069 to see if it equals 29/06/2011.
I have written the following
Code:
=if(DateValue(H3069)="29/06/2011","Y","N")
which returns #Value!
I've got 12 columns (headed Jan - Dec), each of which contains a combination
of numerical & blank cells. For each row, I want to select the first
non-blank cell and return the column header that it lies in e.g. Row 1, first
non-blank cell is in the Apr column, so I want the text "Apr" to be returned
to another cell.
I need a formula to look at a cell and if it is =< 102 say "Flat Bed", or =120 "Double Drop"
View 1 Replies View RelatedI have a spreadsheet that can do more than one calculation on each row
ITEM
FLOW
(l/s)
[Code]....
The values in row A can only be selected from a named range drop down. If no entry is there (i.e. blank) then i'd ideally like the cells to return from black to white.
I am trying to figure out how to return the contents of last non blank cell in column B, based on the name in column A. So, if I choose "Sam", the result I am looking for is "blue". If I choose "Pete", the result I am looking for is "orange".
Sam
red
Sam
blue
Sam
Pete
orange
Sam
i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies View Relatedwith some basic code. I want to check the activecell, if it's blank then copy the contents from the cell above, if it's not blank, leave it & go down to the next cell & repeat until last row.
View 7 Replies View RelatedI can't seem to get this If statement to return an empty cell It returns 0
HTML Code:
=IF(+B7+C7="","", +$C$3-B7+C7)
The formula will go in D7
If either B7 or C7 is empty, leave D7 empty
If either B7 or C7 has a value, add or subtract from $C$3
How would I write an IF Then Statement to test if a cell is blank? (meaning it could have "Div/0!", text, 0, or "n/a".)
View 4 Replies View RelatedIf a cell is blank, what is the formula that can be used to place a 0 in that spot if the spot is empty. Also, what is the formula to leave a spot blank if no data can be pulled for its formula (to get rid of a #DIV/0! error).
View 9 Replies View RelatedI'm migrating data from Financisto for Android to CashTrails for iOS, and I need to format my CSV file a specific way for conversion to a CashTrails file.
I'd like to do the following in Excel 2013 (I have access to other versions if I need to):
1. Highlight a range of cells (i.e. A1-H20)
2. Apply following action: IF cell has data, add " to beginning of cell and " to end of cell, AND IF cell has no data, place "" in cell.
This can be done, right? I'm desperate!
It would look like this in Notepad.
Before:
Date,Time,Amount,Category,Tags,Account
12/31/13,12:00 PM,$3.99,General,,Checking
12/31/13,12:30 PM,$5.00,Shopping,gift,Cash
After:
"Date","Time","Amount","Category","Tags","Account"
"12/31/13","12:00 PM","$34.99","General","","Checking"
"12/31/13","12:30 PM","$5.00","Shopping","gift","Cash"
I have a problem with finding the right function. My goal is to have the following function...
The cell D1 has the following function: [=IF(B1<=C1;"YES";"NO")] But I would like to have the cell D1 to be left blank, if the cell A1 is blank.
I would like a macro that copys the contents of a cell and pastes it into the column before it and continues to copy that same number downward as long as the cell next to it contains numbers. So: ....
View 9 Replies View RelatedI need to clear the contents of the cell in Row "A", if the cell in Row "I" is blank.
The issue, is there are roughly 1200 excel documents in a folder and subfolders. That is a painful amount of opening workbooks, sort ascending and deleting. Not on my top 10 list of things to do.
If someone could create a code to do this, and loop it through a folder (I can move all the files to a single folder manually, not an issue)
I have a column of dates in column E1:E100.
E1 = 25/06/2012
E2 = 02/07/2012
E3 = 09/07/2012
etc.
In column F1:F100 I will insert "Y" in the one of the blank cells next to one of the date cells in column E1:E100.
In cell B1 I want to reference where the cell in column F is "Y" then use respective date in column E.
e.g.
If i have "Y" in cell F1 then in B1 I want to show E1 (25/06/2012).
If i have "Y" in cell F2 then in B1 I want to show E2 (02/07/2012).
If i have "Y" in cell F3 then in B1 I want to show E3 (09/07/2012).
etc.
I need to sum cells that contain this formula: =if($c$5=0,"",c5*b5). I am getting a wrong data type value error.
View 7 Replies View RelatedI have a nested if statement that doesn't give a blank cell when it is evaluated. The cell is general formatted but results in a '0' in the cell instead of a completely blank cell.
If statement is:
=IF('Sales info'!B16="",'Sales info'!B6,IF('Sales info'!B6="","",'Sales info'!B16))
Why is this giving me a 0?
How do you make a cell appear blank when it has a formula in it refering to a cell that hasnt been used yet?
I would like some cells to be blank instead of having #N/A in them.
Im using the below calculation that keeps returning a # DIV/0! error if no data is present, so I have tried to use the ISERROR to make it blank, excel takes the below calculation but still shows the #DIV/0!
=IF(ISERROR( SUMIF('Data Input'!$I$2:$J$1000,AA5,'Data Input'!$J$2:$J$1000)+SUMIF('Data Input'!$I$2:$J$1000,Z5,'Data Input'!$J$2:$J$1000))/(COUNTIF('Data Input'!$D$2:$D$1000,B5)),"",(SUMIF('Data Input'!$I$2:$J$1000,AA5,'Data Input'!$J$2:$J$1000)+SUMIF('Data Input'!$I$2:$J$1000,Z5,'Data Input'!$J$2:$J$1000))/(COUNTIF('Data Input'!$D$2:$D$1000,B5)))
See the attached example spreadsheet which will make this much easier to understand. I want to create a formula in the second worksheet that says "If cell A1 of sheet 1 = "a", Then i want to put the contents of cell B2 ("flour") into cell A1 of sheet 2, I want to put the contents of cell C2 ("egg") into cell B1 of sheet 2 and I want to put the contents of cell D2 ("sugar") into cell C1 of sheet 2. If not put 0.
View 3 Replies View RelatedI am trying to write a statement as follows. IF CELLK11 IS NOT VALUE BLANK AND F11=BLANK THEN TRUE = 1 FALSE = 0.
View 3 Replies View RelatedI have attached a workbook stating my problem.
file1.xlsx