Upon user making selection from data validation list in Active Row Selection & Column A : i would like to do the following (is possible)
,,,,,,,,,,,,,,,
Place formula in Active Cell Row & Column S
=MT4|BID! (followed by cell A1 but replace the "/" with "") followed by "m"
I have tried several combinations but with no success.
Also - where would i place this code so that it automatically updates the formula in Column S as soon as the user changes selection in Cell A?
I was wondering if anyone knows code that will check to see if there is a certain value in a cell, and if there is place a "1" in another cell in that row.
find a way to place a value of 1 (or a text "email sent: mm/dd/yy") in a specific cell on each row when an email is sent out through some VBA code I currently have. Then when the workbook is opened on another day, the code will look to see if that cell (target) is populated so that it doesn't trigger a second, third (repetitive) email every time the workbook is opened.
The spreadsheet contains rows of many clients, and growing every week. The code needs to be designed to search through each row, along a specific column (lets suppose column R beginning at row 7). When it finds the target rows blank, the code will turn each target cell red, as well as trigger a message box alerting that follow-up action is required.
Excel 2007 I have 80 very similar sheets. The only difference is the sheet name (Phase A (1), Phase A (2) etc.). I want the formula located in cell B5 to be different on every sheet.
I have listed the desired formulas on a single seperate worksheet, named "Overview". On this sheet, the following columns have these data in them: A - Sheetname (example: Phase A (1), Phase A (2) etc.) B - Cell location (example B5, constant)
C - A formula (example: =Sheet1!G47, =Sheet1!G48, etc.)
I would like to create a macro that will loop through all the sheets, doing the following: 1. Check if the sheetname exists in column A of the Overview sheet 2. If it does, take the formula from column C of the Overview sheet 3. And put it in the cell specified in column B of the Overview sheet
Here is some code, to illustrate the above. I know the code is mostly nonsensical.
Code: Sub Enter_formulas() Dim ws As Worksheet For Each ws In ActiveWorkbook.Worksheets
My VBA code will copy and paste several workbooks into master list. The cells to be pasted will be starting on cells(13,9) until cells(13,501) or Range("I13:SG13"). While the max row will be determined by Cells(Rows.Count, "F").End(xlUp).Row
Here is the progress bar code I found in internet, maxrow/column has been changed to my requirement but how to place my VBA code to this script? the one highlighted in red, I guess it
Code: Sub ShowProgressInStatus() Dim Percent As Integer Dim PercentComplete As Single Dim MaxRow, MaxCol As Integer MaxRow = Cells(Rows.Count, "F").End(xlUp).Row MaxCol = 501
I have 26 ranges defined on my worksheet sheet3. Each range is 10 rows high and 4 columns wide. On my sheet1, I'd like to be able to go automatically to a specific range on sheet3 (I need to provide the choice to go to any of the 26 ranges), selected perhaps by a combobox. The ranges are building occupancy groups like A1, A2, B, E, R1, R2, etc. (26 of them). Then I'd like the user to look at each row in that particular range, select one, and then have the four values in that row placed in corresponding cells on sheet1.
I have this set up now using a four column combobox, and it works just like I want, except that only the first column of data is displayed after a row is selected. If I could get those four cells of data as they appear in the combobox inserted on sheet1, I'd be fine. But I can't. So I'm looking for a work-around. Basically, my goal is to get a specific row of data (4 cells wide) from my named ranges copied into cells on sheet1. But I need to be able to get to the correct range automatically.
I have created a user form and I am trying to get the active control colored. I am using the code from Mr Excel's VBA book - starts on page 454, and I have entered all the code, but now when I activate the user form I get an error ....."Compile Error. Invalid attribute in Sub or Function." and when I click OK, it takes me to this line of code.....
Private WithEvents objForm As clsCtlColor
In the book, this is where I am supposed to start entering the code "behind the userform" rather than in the class module. So, I assume this means that this code goes with all the other code for the user form (in VBA project click on form, then view code). Am I wrong? Should I be adding a module? Not sure what I am doing wrong.
Here is the code I have in the class module....
Public Event GetFocus() Public Event LostFocus(ByVal strCtrl As String) Private strPreCtr As String
Public Sub CheckActiveCtrl(objForm As MSForms.UserForm).......
I am after a macro to do the following, my visual basic skills are very limited (non existant):- Look at the date in cell A1 on Sheet 'Live Report' and err 'remember it' Copy a range of cells from A3 to A10 on 'Live Report' Go to sheet 'Monthly Summary' and find the date that had been remembered previously (this date will be in column A on 'Monthly Summary' which will probably be a mixture of values and formulas). After the date has been found paste special and transpose the 'values only' copied range from 'Live Report' (A3 to A10) in column B on 'Monthly Summary' next to the date that has been found in Column A.
Spreadsheet 1: So in column "A" I have all of the dates written out. Then i need column "B" to put the appropriate name next to the date that person chose in spreadsheet 1.
Spreadsheet 2: I have a live form that feeds data into a different spreadsheet.
I am using google spreadsheets.... The formulas are the same as in excel
I have a spreadsheet of which i need to count instances on 2 COLS and place in a graph.
Example D...................................... Col E JO BLOGGS....................... ERROR JO BLOGGS....................... ERROR JO BLOGGS....................... SPOIL JO BLOGGS....................... SPOIL JANE DOE........................ ERROR JANE DOE........................ SPOIL
I need it to count the errors Jo bloggs had so i can populate the chart, the chart would be no problem once i can separate the data as described. I would then have to do the same with Jane Doe.
I'm creating a Speech and Debate calculater that presents winners names by place according to their score. If you look at Tab HSSE Results it will read the inputed information from HS Speech English. I want the names of the students to appear in the correct ranking order in the respected grade rankings chart. I currently have a countif formula which reads the grade, but I think I need to link that with an index formula which I'm having problems with.
I have a list of Items and the quantities of those items on one sheet. Each item has a section location number as well. (three Columns, Item, Quantity, and Section Location). the list can repeat the same item multiple times.
This is why I then have a summary sheet to uses a SUMIF formula to sum the quantities of a given item that are in a givin section. which my SUMIF Formula works great for. But my problem is some items have the word "LUMP" as its quantity and not a number. I want to add to my array formula so if the item does have a LUMP quantity and the lump quantity is in the section location to put LUMP on the summary sheet. here is my formula
projectInfo is the sheet where the list is. Column AE is the Item column on the projectinfo sheet column B on the summary sheet would be the item that i want to sum the quantities for Column AD is the section location column on the projectinfo sheet the AA$10 is the row and column of the section location i want to limit the sum of the quantities to the formula is in cell AA59 So it will sum all the quantities in the list on the projectinfo sheet if the item and section location match whats specified on the summary sheet.
getting LUMP to display if its a lump quantity. The Lump can only show up if the item on the projectinfo sheet has LUMP for that Item AND in that section location.
EDIT: Column AF on the ProjectInfo Sheet is the quantity column
I have a macro that imputs data from an external database and puts it into a temporary worksheet. This data has 3 columns (ID, Date, Amount). I am then making another sheet which has X number of tables (one for each ID), with the years being the column headings, and months being the row headings. ie.
| ID X | +------+------+------+---> | | 1999 | 2000 | 2001 | +------+------+------+------+---> | Jan | $100 | $250 | $300 | +------+------+------+------+---> | Feb | $200 | $300 | $200 | +------+------+------+------+---> | Mar | $300 | $250 | $100 | +------+------+------+------+---> | Sum | $600 | $800 | $600 | | +------+------+------+--->
| ID Y | +------+------+------+---> | | 1999 | 2000 | 2001 | +------+------+------+------+---> | Jan | $100 | $250 | $300 | +------+------+------+------+---> | Feb | $200 | $300 | $200 | +------+------+------+------+---> | Mar | $300 | $250 | $100 | +------+------+------+------+---> | Sum | $600 | $800 | $600 | | +------+------+------+--->
Currently I have a few hidden fields for the DSUM Criteria. I start making the tables. And then filling in table based off of the month and year. Doing so I need 3 criteria: >= First Day of the Month <= Last Day of the Month = ID #
The problem is it takes Excel too long to fill in the 3 criteria fields, calculate the result, copy the result, and place it into the correct place on the table. Is there another way to get this data into the correct tables faster? Instead of using DSUM?
I have a RAW DATA work sheet that has data of electricity consumption for a given week but it is in a vrtical table.
I have many other work work sheets in the workbook that I require to look at the RAW data and the return the correct information in the specified cells
I need the store number that is in cell F1 of each sheet and the Date on each sheet that are on Row4 of each sheet to Look up and match the information in ROW1 for the store number and columnA for the dates.
then in columnB of RAW DATA I have time intervals of 30mins which need to match up with the time intervals on the sheets and display the readings from the RAW data on the sheets.
******** ******************** src="http://www.interq.or.jp/sun/puremis/...<CENTER><TABLE cellSpacing=0 cellPadding=0 align=center>Microsoft Excel - Energy Analysis WE15-03-09.xls___Running: 11.0 : OS = (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA2A3A4A5A6A7A8=ABCDEFGHIJKLMNO1Reading DateReading Time8912116617118519682296710191119125612571292209/03/200900:0012.5926.74929.69668.728.6487.526.5616.2312.6416.3818.08317.02719.569309/03/200900:3011.8467.211.49610.1245.8726.821.817.9811.3216.711.96214.65619.243409/03/200901:0010.7368.11211.19811.286.27.415.2330.3412.0416.269.5527.26429.02509/03/200901:3010.78767.612810.68510.40725.6966.814.888.936.8416.618.53448.72645.4432609/03/200902:0011.0727.235213.01310.3235.9288.814.757.875.9218.059.38247.09445.3136709/03/200902:3011.2996.819210.26210.1765.70410.414.758.135.0916.489.0566.88325.1984809/03/200903:0011.8116.18248.952411.3695.88.314.697.774.9916.87.20964.71046.2496RAW DATA [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I need a formula to drag down the attached that will place zeros infront of any numbers that don't have 9 digits. so if a part number consists of 6 digits then i need 3 zeros in front of it, if a part number consists of 9 digits then i dont need any zeros proceeding it.
I use Excel 2002 - I have a column with Text in its cells. The cells usually range from 30 to 130 characters including spaces. I need to use word wrap.
I would like to be able to see where the 55th character is ( Including spaces ) - but I also need to see the rest of the contents of the text in the cell.
I have thought about coloring the first 55 character/spaces ?
or inserting a character at space 56 ? Example below
XXXX XXX XXX XX XXXXX XXX XX XXXX XXXX XXXX XXX XXX XXX XX~XXX X XXXX XX
I am using the Networkdays function to calculate the number of working days between a date entered in A1 and a date in B2 and I have a range of holidays called 'holidays' and then have the result placed in E1.
If a cell is blank, what is the formula that can be used to place a 0 in that spot if the spot is empty. Also, what is the formula to leave a spot blank if no data can be pulled for its formula (to get rid of a #DIV/0! error).
