If Range C4:C100 Has A Value 0(zero) Than Change In Z?
May 12, 2014If range C4:C100 has a value 0(zero) than change in Z automatically
i mean any 0(zero) in range convert in to Z (words)
ADVERTISEMENT
Change To Code For Change In Range
Mar 27, 2012I have recorded the code below that does what I need, problem is I will use the code on files with various amounts of rows. What can I change in it so it will work on all different size files.
Code:
Sub Macro3()
'
' Macro3 Macro
[Code]....
Macro To Change Range / Action Depending On Worksheet (range To Autofill)
Sep 17, 2013Currently my Macro should: Turn off any filtersNumber column A from 1 to 1000 (starting in A14)Drags formula from K14-O14 down to last row of data shown in column Athen puts cursor in last empty cell in column B ready for user to enter data
On point 3 - I want the range to be K14-O14 if active worksheet equals "EXCHANGES" but if its on the "VALUATIONS" tab the autofill range should be L14-P14
I have found bits and pieces of macros on the internet and put them together so if my macro below is not the most effective for my needs but here it is in it's current state:
Here is my macro:
Sub AddNewEntry()
'TURNS OFF FILTER IF FINDS ONE ON
Dim wks As Worksheet
[Code]....
I Named A Range With The Name Box- Change The Range??
Jul 14, 2009I'll attach an example.. I just can't seem to figure out how to update the range if I have already named it something using the Name Box to the left of the Formula bar.
View 2 Replies View RelatedSum X Values Of A Range Where X Can Change
Dec 10, 20131) I would like to sum (or average) the top X numbers from a range.
2) I realize that this can be done with the Large function and an array list, and I have done that, however, I would like more flexibility than that.
3) Ideally, I would like to input a value for x in a cell and then the formula would refer to the value and select that many from the range.
i.e. I have rows 5-20, each with 10 values. I would like to average the top 5 values of each row. I can enter 5 in cell C1 and it will return the average of the top 5 numbers for each row (think grade book with 10 assignments). So each student has an average grade based upon their best performance. Then, without changing any of the formulas, I just enter the number 7 in cell C1 and the averages now use the top 7 values instead of top 5 and I do not have to make any changes to the averaging formula at the end of each row.
Change And Range To An Array
Jan 5, 2010Through VBA is it possible to give a range of cells that should be converted to array formulas? As part of my macro I am copying a sheet from one book to another. This sheet contains a lot of formulas and so as not to keep the reference of the old book I find and replace "=" with "#" and then swap them back after the move. This works fine for all normal formulas but not the Array formulas.
If someone could tell me how to give and range and convert them all to arrays or can think of a better method of moving a sheet from one book to another without the formulas keeping the references to old book.
Change Code To Look Through A Range
Jun 5, 2013This code is coulnm specific, can this code be adapted to look through a range for a match i write this code up to 25 time changing the column it looks at each time, the row always stays the same the location it paste to also always stays the same if it could be made to look through a range in reducing the amount of code to write.
the range it needs to look through would be, row 6 from column B to column Z.
the line i am hoping to adjust for this is below it reads: "WST.Cells(6, 2)Then"
HTML Code:
If WS1.Cells(8, 2) = WST.Cells(6, 2) Then
WST.Cells(7, 2).Resize(30, 1).Copy
Worksheets("torr1").Cells(9, 5).PasteSpecial Paste:=xlPasteValues
nextrow = nextrow + 1
End If
VBA To Change Row Label Range?
Feb 6, 2014I have a worksheet ("Pivot Tables") pivot table ("Breakfast"), and the Field ("Date") in the Row Labels. The date ranges from 1/20/2014 - 2/6/2014. My issue is figuring out a macro to automatically change the date ranges to what I want.
The macro I recorded is this:
Code:
Sub DateChange()'
' DateChange Macro
'
' Keyboard Shortcut: Ctrl+r
[Code].....
Is there a simpler way to write the code so I do not have to change the dates I want visible each time. But instead just write the start and ending date.
Using Range To Change Values?
May 23, 2014I am trying to change values using Range and it doesn't quiet work.
Code:
Range("C2:C100").Value = Range("I2:I100").Value
Change Even For Cell Range
Jan 21, 2008I want to call a subroutine if the user changes a value in any of 14 cells. I see excel's help on this:
Syntax
Private Sub Worksheet_Change(ByVal Target As Range)
Target The changed range. Can be more than one cell.
But I do not know where to put the code. I don't think I put my range right in the Target definition of the subroutine, but rather call the subroutine from some other part of the code with a range as arguement?
On Workbook_Change Change To Range
Jan 2, 2009Is there a way to make the following code only work when values in a specific column changes...in my case column n, from n5 to n400.
Right now, anytime I alter the value of any cell using some other vba stuff, this code runs and slows everything down. I'd like to eliminate that.
All the code is supposed to do is search column N, and if the column matches a specific value I have placed on another sheet (a string), it changes the color of the entire row to the colors I specify.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim Cell As Range
Dim Rng1 As Range
Dim var1 As String
Dim var2 As String
Dim var3 As String
Dim var4 As String
Dim var5 As String
Dim var6 As String
var1 = Worksheets("Setups").Range("B6").Value
var2 = Worksheets("Setups").Range("B7").Value
var3 = Worksheets("Setups").Range("B8").Value
var4 = Worksheets("Setups").Range("B9").Value
var5 = Worksheets("Setups").Range("B10").Value
var6 = Worksheets("Setups").Range("B11").Value
Change Range Of Maximum Value
Jan 2, 2009From A1:A500, I have data with different numerical values. I want to be able to use a corresponding column and rows (example: B1:B500) where I can enter formula where maximum values where be reported. This I would like to change with a simple change of a single cell value (example: C1). So, If C1 has a value of 10, it will be used from every b cell to create a maximum value that would use a range going back only 10 cells for A.
View 9 Replies View RelatedChange Range In SUM With A Number
Jan 13, 2009Is there a way to enter a number in a cell that determines the range size of a sum formula? An example would be if A1 = 5. The formula in B1 =sum (C1:G1) etc
Change Definition Of A Range Name
Nov 11, 2006I have five macros that look like this
Sub Region1()
ActiveWorkbook. Names.Add Name:="Region_Name", RefersToR1C1:= _
"=Scroll.xls!Name_1"
ActiveWorkbook.Names.Add Name:="Region_Values", RefersToR1C1:= _
"=Scroll.xls!Region_1"
End Sub
Sub Region2()
ActiveWorkbook.Names.Add Name:="Region_Name", RefersToR1C1:= _
"=Scroll.xls!Name_2"
ActiveWorkbook.Names.Add Name:="Region_Values", RefersToR1C1:= _
"=Scroll.xls!Region_2"
End Sub...............
In the chart Region_Name is the name of the series Region_Values is the values of the series. I have a button for each routine. I want to use only one button instead. How?
Change To Formula Based On A Range
Apr 26, 2014=IF(D8=9999,"",IF(D8<>"",0.02,""))
I am currently using this formula and rather than 9999 I want any number from 9000 to 9999 to result in 0
How To Change Paste Destination Range
Apr 29, 2014I have a existing code which copies data from one 6 workbooks to Main workbook.
Copying data from workbook 1:
It has Header at 2nd row and Data starts from 3rd row.
From A column to AG
Destination workbook: In this workbook. I have Header at 26th row From A to AG copied Data needs to be pasted at 27th row.
And like wise while continuing to copy datas from other workbook it will get added at last.
My code is working fine. But my requirement here is at Destination area.
Now i have moved Header in Destination workbook. Header is at 26th row
From A To Ag to D to AJ
Data needs to get added at bottom of each paste.
HTML Code:
rowofcopysheet = 3
Set copyrng = wkb.Sheets(1).Range(Cells(rowofcopysheet, 1), Cells(Cells(Rows.Count, 1).End(xlUp).Row, Cells(1, Columns.Count).End(xlToRight).Column))
Set Dest = shtDest.Range("A" & shtDest.Cells(Rows.Count, 1).End(xlUp).Row + 1)
copyrng.Copy
Dest.PasteSpecial xlPasteValuesAndNumberFormats
Fill Color Change With Range
Nov 24, 2008Function BG(InRange As Range)
Range("InRange").Select
With Selection.Interior
.ColorIndex = 6
.Pattern = xlSolid
End With
End Function
That so far but not quite sure why that isnt working. I want to change the fill color with a UDF that all they do is select a Range and it changes those fill colors to whatever the Colorindex may be. I didnt find anything while searching the forums with this already.
Range Value: Change The Exchange Rate
Dec 21, 2009I have a financial sensitivity sheet setup by year, where for example below each year is a cell you can change the exchange rate in and it effects the outcome of cash flow as these cells are linked to part of the finances. Then I have a "reset" button setup that is assigned to a macro. When you click the reset button all cells in the exchange rate row will be changed to a value that is entered in a "base case" cell. That way various years can be changed but also everything can be set back to the default or base case. My macro for that case is this:
View 5 Replies View RelatedChange Dynamic Range While In Loop?
Sep 29, 2012I am wanting vba to loop though a range basically till the last row of the column however within the loop the row gets inserted and the lr which is pre defined does not change. I want to be able to change my lr within the loop, maybe reset it or something...or may be alternative..
I tried using a method where it will loop through a each cell in col however that takes too much times....because it is going through each column...
Code:
lr = Cells(Rows.Count,
Code:
iCol).End(xlUp).Row
For y = 1 To lr
Cells(y, iCol).Select
If ActiveCell.value "" Then
[Code]....
Percentage Change Between Range Of Numbers?
Feb 27, 2013Pretend their are two Tabs in excel.
Tab 1:
"A1" contains a random number: "20"
Tab 2:
Column "A" has tonnes of random numbers:
6000 - Starting Balance (changeable)
5890
5800
5950
6080
6100
6180
6250
6300
an so on... (1,000 rows)
Based upon the number "20" that I placed in A1 on Tab 1, I want a formula that looks at the first 20 rows in column A within Tab 1, and then calculate the percentage change between the extreme "peak to trough" of the highest number to the lowest number within the 20 rows...
Below should make it really simple:
6000 - Starting Balance (freely changeable)
5890 -1.83%
5800 -3.33% - This was the lowest percentage change from the starting balance of 6,000
5950 -0.83%
6080 +1.33%
6100 +1.67%
6180 +3.00%
6250 +4.17%
6300 +5.00%
Combobox Change Within Vertical Range?
Jul 31, 2013I have a massive list of items, most of the same items have different detail depending on the item itself and/or region its being sold etc. I'm been using combo boxes to change regions giving the full range of items within that region but different prices etc.
The problem i'm having with combo box or even vlookup is I can only search or change details in rows (row number), and not able to figure out how to change details within a set of columns (vertically). I want to be able to select the region via combo box and change the details within a set of columns (top to bottom).
Change Range Length Programmatically?
Aug 19, 2013I have a workbook that contains a form with cells that use choice list validation. It also contains a worksheet with all the choice lists. Each choice list is a named range. The form is used to collect data that is new and from historical records. The historical records contain entries that are no longer allowed in new data. To allow for the older data I have choice lists (named ranges) that contain both the new and obsolete choices. This is a data problem waiting to happen. I would like to be able to have the user tell the workbook if the data is new or historical. If new I would only provide them with current choices. If historical, I would provide them with all choices, current and obsolete.
I would link the VBA script to change expand the ranges when told the data being entered is historical. The problem is I don't know how to code such a script. For example one of the cells has as current choices W, M, D. The range would be named MoistureState and the range would be A2:A4. There is one obsolete choice, E. If the Historical data button was clicked the MoistureState range would change from A2:A4 to A2:A5.
How would one go about expanding the named range?
Change Range To Look At Individual Cells
Jul 7, 2008how to change an argument in VB to range to each and every individual cell in the range?
At the moment i have :
If 100 < Application.Min(Range("G5:O5")) Then
but i want to change it to :
If 100 < Application.Min(Range("G5 or H5 or I5 or J5 or K5, etc).
I think that "or" is the correct way to describe it.
I guess i mean that i want the formula to look at each individual cell instead of the above code.
Change Range Selection With A Variable
Feb 19, 2009How do I change the selection of a range with a variable, and not a hardcoded number in XL2003? I have to update a set of spreadsheets every month, and it's a hassle to have to constantly open my pivot table worksheet, copy, open the summary worksheet, paste ... etc. etc. etc. The code below is my attempt at creating a ComboBox with "January, February, March, etc." and every time I select a particular month it will automatically copy data from my pivot table worksheet into my new summary worksheet in the correct column. The range of data from my pivot table worksheet will never change, so I have no problem hardcoding that in, but based on which month is selected will alter which column the data goes in in the new worksheet.
I want to be able to write code for one month (say January) and then when I want to use a different month (say February) I can just change the column number and call up the originial January code.
Private Sub ComboBox1_Change()
Dim ColNum ' This is the variable I want to change based on which month is called
If ComboBox1.Value = "January" Then
ColNum = 1 ' Column number for Column A- Where my January column is
Elseif ComboBox1.Value = "February" Then
ColNum = 2 ' Column number for Column B- Where my February column is
' etc. etc. for each month
End If
Call January
End Sub
Private Sub January()
' Just a quick msgbox to make sure the previous macro is calling this one
MsgBox "Is this macro running?", vbQuestion + vbYesNo, "Check"...........................
Change Event Range Reference
Mar 2, 2009why won't this change event work? Macro Mail_with_outlook keeps sending no matter what.
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("a3").Value 200 Then Exit Sub
End If
End Sub
Macro Activate Whenever There Is A Change In Range
Jul 4, 2009I want macro2 to activate whenever there is a change in Range(C25:C5000). I want macro2 to activate only once even if there are 10 changes to the cells within this range. I tried the code below but it does not work.
Private Sub Worksheet_Calculate()
If ActiveCell.Row > 25 And ActiveCell.Row < 5000 And ActiveCell.Column = 3 Then
macro2
End If
End Sub
To Get A Range Of Cells To Change Colors
Sep 24, 2009I'm trying to get a range of cells to change colors. This should happen from VBA code and happen on specified sheet that is not the default sheet when the userform appears that has the button that triggers the event. I have to reference the range with variables because it changes depending on other events.
If I put in: ....
Dynamically Change The End Value Of A Range In A Function
Jul 20, 2006I am using the STDEV function on a range of values: STDEV($I$26:I2545). My starting cell is constant and I would like to make my ending cell variable based on a value I enter in a master cell (A1). The value I enter in the master cell is multiplied by 252 the product would equal the row number I would like to stop at. So if I enter 1 the formula will be STDEV($I$26:I252). I tried: STDEV($I$26"I"&(A1*252))) and other such variations to no avail
View 5 Replies View RelatedChange Range If Cell Value Is Greater Than Zero
Sep 16, 2006I have a certain range to start, and want to exclude rows if a defined cell is not greater than zero. I cannot figure out the syntax to achieve. The following code selects the range even if the single cell is NOT greater than 0...
View 5 Replies View RelatedChange Chart Range Dynamically
Sep 24, 2006I maintain Production data in an Excel Sheet and have the code which will create Chart for each Employee. Sample Sheet Attached. However, I want the Chart Range to be updated in a Single Chart and exported to a .Gif File.
View 2 Replies View Related