Change And Range To An Array
Jan 5, 2010
Through VBA is it possible to give a range of cells that should be converted to array formulas? As part of my macro I am copying a sheet from one book to another. This sheet contains a lot of formulas and so as not to keep the reference of the old book I find and replace "=" with "#" and then swap them back after the move. This works fine for all normal formulas but not the Array formulas.
If someone could tell me how to give and range and convert them all to arrays or can think of a better method of moving a sheet from one book to another without the formulas keeping the references to old book.
View 5 Replies
ADVERTISEMENT
Jul 25, 2012
I want to know how to copy a range into an array then an array back into an range.
Code:
Dim a(3,3) As Double
a(3,3) = Range("C3:E5")
Range("C10:E12") = a(3,3)
View 1 Replies
View Related
Aug 25, 2006
I am trying to copy or edit a cell thats has the following formula (see below), I keep getting this message "You cannot change part of an Array!"
=If(ROW($A2:$A8)-ROW(A2)+1>COUNT(W2:W8),"",INDEX($A:$A,SMALL(W2:W8,ROW(INDIRECT("1:"&ROWS(A2:A8))))))
View 5 Replies
View Related
May 12, 2009
I am trying to change the variable value in my following code through array.
What I want is that both the statements
Debug.Print testarray(0) & "........" & testarray(1) & "......." & testarray(2)
Debug.Print custname & "........" & custaccount & "......." & worthcredit & vbCrLf & vbCrLf
should deliver me the same values i.e changedname 123456 and true
for testarray(0),testarray(1),testarray(2) i am getting the values but I am not able to change the variable values for custname ,custaccount and worthcredit, although I am accessing the same elements.
Here is full ....
View 12 Replies
View Related
Jul 19, 2014
I have a sheet ("ORDEM"), i need paste values in sheets V1, V2 ...V5, but change array.
Look my file, i make manual result in V1
View 6 Replies
View Related
Aug 14, 2009
I am having a ton of trouble with this. I am trying to add a single text row in between existing data. I have tried multiple loops to try to place an array into Column G, but I cannot figure it out. Is there some coding that will produce the sort of result below in column G?
View 6 Replies
View Related
Apr 18, 2013
I have the following array formula that works. I am trying to modify it so that on cells where there is no data, the value which appears (#NUM) changes to a "Blank". I am stuck on how to do it.
The array formula is:
=INDEX($C$2:$C$26,SMALL(IF($B$2:$B$26=$B$32,ROW($B$2:$B$26)-ROW($B$2)+1),ROWS($C$32:C32)))
View 3 Replies
View Related
Dec 24, 2013
Code:
Sub TabColor()
Dim mySheets As Worksheets
Dim mySheet As Worksheet
Set mySheets = Worksheets(Array("sheet1", "sheet2"))
For Each mySheet In mySheets
With mySheet.Tab
.Color = 9
End With
Next
End sub
I'm getting a type mismatch at line 4. Can I not group the sheets like this? This is just a test program, my real one would have 10 or more tabs in the array.
View 3 Replies
View Related
Feb 11, 2014
I have 68 cells per sheet and approximately 70 sheets that i need to change to an array function.
Ive changed the formula used using Find and replace but now I need to convert ALL those cells to array.
Is there something I can use to change them all at once. Or am i going to have to go into each cell and F2 CTRL SHFT ENTER?
View 5 Replies
View Related
Dec 18, 2006
How to change part of an array value?.If i try to change array value "Microsoft Excel" popups a dialog stating "You cannot change part of an array."
Somebody have mention to use "Ctrl+Shift+Enter" but this will change entire array value.So I need a change only a specific cell value.
View 4 Replies
View Related
Jan 11, 2009
I have been exhausted with a workbook I have been working on for quite some time now, and hope I can get some help here.
I have the following array formula in Sheet1, S2 and copied down to S10051:
View 14 Replies
View Related
Jul 27, 2007
I am trying to do a vlookup where the values in the Table_Array have a string appended to them. For example:
I want to look up the string "Example1" and the lookup range is
Example1 - monthly
Example2 - weekly
Example3 - weekly
Example4 - monthly
So essentially I want vlookup to only look at the string before the hyphen. My initial thought was to do something like this: vlookup("Example1", left(A:A, 8), 1, FALSE)
View 6 Replies
View Related
Jul 27, 2008
i have this code which looks in a folder and moves all .csv files from folder into workbook. The code uses an Array.
If the code does not find a file in the folder (from the array) it returns an error. How can i modify this so that (if a file is not found from the array) then the code still continues without generating errors?
This is the ....
View 9 Replies
View Related
Jun 25, 2014
i want to change the table_array reference without changing formula in every worksheet. I tried using a new worksheet and naming it the same as what is referenced in vlookup table_array but it messed up all the data.
I have to use a different worksheet every month so need a way to change reference OR how to change array data without messing up the worksheets with the vlookup
View 9 Replies
View Related
Nov 7, 2008
Search Column A for a name (using an array if possible). If it finds this name, add a string of text to the AA cell on the same row that it found the name on.
For example,
If in A1 it finds the specified name. It then adds a string of text to AA1.
View 2 Replies
View Related
Nov 26, 2008
I'm currently trying to compare all of my companies data sources for staff, ie helpdesk, telephony, ldap etc. and I have made quite a bit of progress, mostly thanks to this forum, however one issue I am running into, is the fact that when I use the text to columns funtion (in a macro) it's splitting up names which are double barrelled into 3 columns. The names are in the format of...
View 2 Replies
View Related
Jan 17, 2014
What I want is that I have a table like below (but it's long for 52 weeks) and long down with Vlookups. I want the formula with which I can just do the copy-paste and it will work. W1, W2.... are the sheet names with exactly the same formats inside.
A
B
C
D
E
5
W1
W2
W3
W4
6
Sales
10
#N/D!
[Code] .......
The base formula (for W1) is:
=Vlookup($a6;'W1'!$A:$B;2;0)
What I want, is the formula which instead of "W1" will write the sheet name which is in a row 5 (basically - cell name which is equal the sheet name), so with just dragging and moving the formula I will got the data from different sheets.
I tried this: =Vlookup(A6;'indirect("c5";1)'!$A:$B;2;0)
But I got #N/D! as in the example, instead of the numbers (yes, I put numbers into W1 and W2 sheets .
View 4 Replies
View Related
Mar 27, 2012
I have recorded the code below that does what I need, problem is I will use the code on files with various amounts of rows. What can I change in it so it will work on all different size files.
Code:
Sub Macro3()
'
' Macro3 Macro
[Code]....
View 6 Replies
View Related
Sep 17, 2013
Currently my Macro should: Turn off any filtersNumber column A from 1 to 1000 (starting in A14)Drags formula from K14-O14 down to last row of data shown in column Athen puts cursor in last empty cell in column B ready for user to enter data
On point 3 - I want the range to be K14-O14 if active worksheet equals "EXCHANGES" but if its on the "VALUATIONS" tab the autofill range should be L14-P14
I have found bits and pieces of macros on the internet and put them together so if my macro below is not the most effective for my needs but here it is in it's current state:
Here is my macro:
Sub AddNewEntry()
'TURNS OFF FILTER IF FINDS ONE ON
Dim wks As Worksheet
[Code]....
View 8 Replies
View Related
Oct 31, 2008
I have data in a spreadsheet that I would like to send to another sheet as follows:
Use the values in the range $D$2:$D$12 and $F$2:$F$12 to reference the column and row of a cell and the values in the range $G$2:$G$12 to reference a specific group of cells on another sheet into which would be inserted the value found in the range $C$2:$C$12. The best I have come up with is to place a formula in each of the cells in the second sheet that would state:
IF a value in the range $D$2:$D$12 matches the column # of the current cell AND IF the corresponding value in the range $F$2:$F$12 matches the row # of the current cell AND IF the corresponding value in the range $G$2:$G$12 matches the region of the current cell THEN the value of the current cell EQUALS the value of the corresponding cell in the range $C$2:$C$12.
I think this will work but I don’t have enough knowledge of Excel to write this formula.
View 9 Replies
View Related
Jun 9, 2009
This code works!
Dim rTmp As Range
Dim aTmp As Variant
Set rTmp = Range("A1:D21")
aTmp = rTmp.Value
Range("A1:D21") = aTmp
If you exchange Range("A1:D21") with rTmp.value it does not, why?
This code doesn't work?
Dim rTmp As Range
Dim aTmp As Variant
Set rTmp = Range("A1:D21")
aTmp = rTmp.Value
rTmp.Value = aTmp
View 9 Replies
View Related
Feb 7, 2014
Attached file should be self-explanatory.
I want to be able to set sum range using lookup or match.. For example if I change B2 value to Nov-13, I want it to sum column K.
View 5 Replies
View Related
Jun 19, 2014
I have a table that looks like this:
| A | B | C | D | ...
1 | fu | bar | lab |...
2 | rab| uf | luv |...
3 |...
All of my values are within the Range "A1:C2"
I would like to have a variant array which contains the addresses of this range.
Things I tried that didn't work:
If my variant is V and my range is R,
v = r returns an array which contains
fu|bar|lab
rab|uf |luv
V = R.Address gives me
A1:C2|A1:C2|A1:C2
A1:C2|A1:C2|A1:C2
What I actually want:
A1|B1|C1
A2|B2|C2
i know this can easily be done with a loop, but the table I want to use this on is huge, and a loop takes hours to execute.
View 1 Replies
View Related
Dec 29, 2008
Hi all, starting this as a new problem because it's so far different from what I was originally talking about; but this does relate in part to my previous thread.
Anyway. I'm trying to set an array to set Range objects so that I can define each one as a seperate With block. Here's what I "know" when starting out.
I developed the following. I keep thinking it should be multidimensional but my sleep deprived brain came up with this instead. The problem is, it's throwing a 1004 Method "Range of object '_Worksheet'" failed at the With statement.
View 6 Replies
View Related
Oct 20, 2009
I am trying sort a bunch of different ranges. So I am trying to use the same sort code but run an array of ranges through. This code is for only two ranges
CA3:CD200 and CF3:CI200. I want to pass the ranges as variables through the sort code but I cannot get it to work.
View 4 Replies
View Related
Sep 3, 2012
I have created several functions in VBA that operate on arrays created by other functions in VBA, however they don't recognize cell ranges as arrays. For example, the UBound function doesn't work with a range argument within my function.
How can I get my functions to recognize cell ranges as arrays, as well as arrays that I have created directly in VBA?
View 9 Replies
View Related
Oct 16, 2012
I am trying to set an Array to prompt user with a series of questions and input answers into a specific row. However, I want to skip over certain columns and leave those blank. How would I modify my code to do this?
Code:
Private Sub CommandButton2_Click()
Dim ArrQues() As Variant
Dim ArrInput(2) As Variant
Dim lngLstRow As Long
Dim strPNfromSales As String
ArrQues = Array("Enter the Part Number.", _ "Quantity Being Returned?", _ "What is the Reason for Rejection?")
For b = LBound(ArrQues) To UBound
[Code]...
I want the first two questions to be input into Column B & C, but then the third question to be input into column I.
View 2 Replies
View Related
Oct 9, 2013
I have a quick question in relation to filling a range with an array.
When I use the following code:
Code:
Sub justdoit()
s = Array(1, 2, 3)
Range("A1:C1") = s
End Sub
It works fine. but when I try to populate the range in rows instead of colums, the array value stays as the first value.
Code:
Sub justdoit()
s = Array(1, 2, 3)
Range("A1:A3") = s
End Sub
I'm experimenting with arrays and would like to get better at them, but this has me stumped for the moment. How to get the values to work going down, like they do going across.
The above code is a small sample of data, I am wating to replicate with using over 80K lines and cell by cell is too slow.
View 2 Replies
View Related
Jun 4, 2014
I have below code:
Code:
myRange = Range(Cells(5, 18), Cells(dRow, 30))
For Each cell In myRange
If IsError(cell) Then
cell = ""
Else
cell = Round(cell, 3)
End If
Next cell
Range(Cells(5, 18), Cells(dRow, 30))= myRange
The problem is that the range does not change after I paste modified array back to it.
View 9 Replies
View Related
Mar 15, 2004
Is type-casting possible in Excel ? For instance, can i typecast an array into a range, and vice-versa ?
View 6 Replies
View Related
