I want to call a subroutine if the user changes a value in any of 14 cells. I see excel's help on this:
Syntax
Private Sub Worksheet_Change(ByVal Target As Range)
Target The changed range. Can be more than one cell.
But I do not know where to put the code. I don't think I put my range right in the Target definition of the subroutine, but rather call the subroutine from some other part of the code with a range as arguement?
I would like to change the name of all cells withen xrange with a text value greater than nothink.
View 4 Replies View RelatedI need my worksheet to automatically fill in a range of cells (from Range B*:G*) with my yellow color once the last cell in the range (G*) receives data, and automatically switch back to no color if the data in Cell G* is erased. However, if somebody merges a range, it should appear as it would by default - as if no macro exists, if that makes sense. I've attached a sample worksheet.
View 2 Replies View RelatedI have a certain range to start, and want to exclude rows if a defined cell is not greater than zero. I cannot figure out the syntax to achieve. The following code selects the range even if the single cell is NOT greater than 0...
View 5 Replies View RelatedIn Excel I want to use a marco to automate a process so that for all the cells in a Range, if any cell is null, it changes to value 0. How can I achieve that?
View 1 Replies View RelatedI need in some way to make the range variable, because it can change. I need only the first range to be different.
Code:
x = .Range("a4:a27").CurrentRegion.Value
A4 have to be instead the cell where Denmark typed. Column A
And
A27 have to be the lasted used cell in column B
But after the row where it have found Denmark.
Please have a look.
Below code is from AB33, But this is not a cross post.
Different question
Code:
Sub copyp()
' Denmark
Application.ScreenUpdating = 0
Dim cell As Range, i&, dic
With Worksheets("Middle Result")
x = .Range("a4:a27").CurrentRegion.Value
[Code] .......
I have a conditional cell that change color or not if condition...OK so far. Now, how can I change the color of a range of cells when condition is in just one cell. Ex:
If C15>=150, change (C3;C20) to yellow.
I really can't find the way to do it.
I want to change the colour of a cell depending on its value, when compared to another row of data identiified by a value in another cell. To try an clarify:
b3 = 1 b5=4 Because b3 = 1 then compare cell b5 with the row g1 as b3=g1 then depending on its postion set a colour
g1= 1 g2:g5 = 2,3,4,5,6
h2= 2 h2:h5 = 7,8,9,10
I have a spreadsheet that contains the 5 digit numbers in the rows and the columns respecstively. I'd like a formular or macro to change font color for each cell. If the combined value of the 5 rows are greater or less than the combined range 87030 and 87200, the 5 cells will be changed to Red. If:.........
View 4 Replies View RelatedI'm creating a project calendar in Excel and for each task I have a Start Date (A) and End Date (B) in adjacent cells. To the right are corresponding date cells like a timeline set up with 52 cells representing weeks of the year. I.e Week 1 (C) starts at 02 Jul 12, Week 2 (D) starts at 09 jul 12 etc. up to 24 Jun 14 (BF).
Start Date
End date
02-Jul-12
09-Jul-12
[Code]......
When a start date and end date are entered in the respective columns, I need to have the color start on the cell for that range in the timeline and that color should carry out to the end date cell in the timeline. A bit like a Gantt chart but not to that detail.
i had to change the color of cell to yellow if the cell content is "N/A"
i had write few lines but don't know how to move in a range cell by cell
How to change the background cell color based on value ranges(s)
I tried conditional formatting but it works between two values only, in my assignment I want to show:
River levels in relation to flood class
>=2m =2.6 =3m major flood (background turns red)
I hope it is possible in Office 2007
I have the following code to update a pivot table:
Code:
Dim pt As PivotTable
Application.EnableCancelKey = xlDisabled
For Each pt In ActiveWorkbook.Worksheets("sheet1").PivotTables
pt.ChangePivotCache ActiveWorkbook.PivotCaches.Create _
(SourceType:=xlDatabase, SourceData:="source!R4C1:R33443C55" _
, Version:=xlPivotTableVersion10)
Next pt
the R33443 term is what will be changing, the columns and the starting row should stay the same. is there a way to instead of using R33443, to enable the range to be changed based on a cell value?
I am working on a spreadsheet for work, and have managed to do everything I need to so far but I need to colour specific letter strings, certain colours within a range of cells (each letter string will only appear once on each sheet)
The strings I will be looking for vary depending on data entered so I will need to cell reference them
The strings that need colouring are in cells with other strings that must stay black (They cannot be separated from other strings due to the nature of the grid)
I need some strings red, some green, and some blue.
These changes should also apply to the whole workbook not just one sheet.
Is there a way to do this with the VBA code.
I have recorded the code below that does what I need, problem is I will use the code on files with various amounts of rows. What can I change in it so it will work on all different size files.
Code:
Sub Macro3()
'
' Macro3 Macro
[Code]....
I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.
Currently my Macro should: Turn off any filtersNumber column A from 1 to 1000 (starting in A14)Drags formula from K14-O14 down to last row of data shown in column Athen puts cursor in last empty cell in column B ready for user to enter data
On point 3 - I want the range to be K14-O14 if active worksheet equals "EXCHANGES" but if its on the "VALUATIONS" tab the autofill range should be L14-P14
I have found bits and pieces of macros on the internet and put them together so if my macro below is not the most effective for my needs but here it is in it's current state:
Here is my macro:
Sub AddNewEntry()
'TURNS OFF FILTER IF FINDS ONE ON
Dim wks As Worksheet
[Code]....
1st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?
2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?
i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.
The existing code i have is:
Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MyText As String
MyText = Environ("username")
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"
[code].....
I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?
Im trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far
Sub ChangeName()
On Error GoTo errhandler
Sheets(1).Name = Sheets(1).range("d10")
Exit Sub
errhandler:
MsgBox "sheet name is already exists"
End Sub
I have below formula.i need to change the cell address AK in the below formula on the value change in the A3.
=SUMIF(Working!$D$6:$D$3000,Report!B3,Working!$AK$6:$AK$3000)
For example if A3 is having value AZ i need the formula changed automatically as below
=SUMIF(Working!$D$6:$D$3000,Report!B3,Working!$AZ$6:$AZ$3000)
I have a drop down sub pasted to worksheet:
Private Sub ComboBox1_Change()
ComboBox1.List = Array(100, 200, 300, 400)
If Range("I11").Value < Range("N11").Value Then
If Sheets("Profile").Range("K18").Value < ComboBox1.Value Then
Range("I11").Interior.ColorIndex = 2
Else
Range("I11").Interior.ColorIndex = 3
End If
End If
End Sub
I want it to change the cell color on drop down change. How can I modify things to have the change in drop down selection?
I have a simple bit of code that fires some code when it detects a change in cell $P$5 but it doesnt work and I cannot understand why - can anyone assist with this one? I am very green but keen:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$p$5" Then
Range("D9:D81"). AutoFilter Field:=1, Criteria1:="<>"
End If
End Sub
I'll attach an example.. I just can't seem to figure out how to update the range if I have already named it something using the Name Box to the left of the Formula bar.
View 2 Replies View RelatedI want to edit a cell's value without changing the formula the cell contains.
View 10 Replies View Related1) I would like to sum (or average) the top X numbers from a range.
2) I realize that this can be done with the Large function and an array list, and I have done that, however, I would like more flexibility than that.
3) Ideally, I would like to input a value for x in a cell and then the formula would refer to the value and select that many from the range.
i.e. I have rows 5-20, each with 10 values. I would like to average the top 5 values of each row. I can enter 5 in cell C1 and it will return the average of the top 5 numbers for each row (think grade book with 10 assignments). So each student has an average grade based upon their best performance. Then, without changing any of the formulas, I just enter the number 7 in cell C1 and the averages now use the top 7 values instead of top 5 and I do not have to make any changes to the averaging formula at the end of each row.
If range C4:C100 has a value 0(zero) than change in Z automatically
i mean any 0(zero) in range convert in to Z (words)
Through VBA is it possible to give a range of cells that should be converted to array formulas? As part of my macro I am copying a sheet from one book to another. This sheet contains a lot of formulas and so as not to keep the reference of the old book I find and replace "=" with "#" and then swap them back after the move. This works fine for all normal formulas but not the Array formulas.
If someone could tell me how to give and range and convert them all to arrays or can think of a better method of moving a sheet from one book to another without the formulas keeping the references to old book.
This code is coulnm specific, can this code be adapted to look through a range for a match i write this code up to 25 time changing the column it looks at each time, the row always stays the same the location it paste to also always stays the same if it could be made to look through a range in reducing the amount of code to write.
the range it needs to look through would be, row 6 from column B to column Z.
the line i am hoping to adjust for this is below it reads: "WST.Cells(6, 2)Then"
HTML Code:
If WS1.Cells(8, 2) = WST.Cells(6, 2) Then
WST.Cells(7, 2).Resize(30, 1).Copy
Worksheets("torr1").Cells(9, 5).PasteSpecial Paste:=xlPasteValues
nextrow = nextrow + 1
End If
I have a worksheet ("Pivot Tables") pivot table ("Breakfast"), and the Field ("Date") in the Row Labels. The date ranges from 1/20/2014 - 2/6/2014. My issue is figuring out a macro to automatically change the date ranges to what I want.
The macro I recorded is this:
Code:
Sub DateChange()'
' DateChange Macro
'
' Keyboard Shortcut: Ctrl+r
[Code].....
Is there a simpler way to write the code so I do not have to change the dates I want visible each time. But instead just write the start and ending date.