I have a script that generates various worksheets based on the day and puts these in folders based on the year/month/day. So a report run today would be in the F:200817 folder.
At the end of each month and then again at the end of the year I need to pull all the reports into a single workbook. The macro I have now allows you to select the folder you want to import the sheets from, but it doesn't recurse subdirectories, so I can only import sheets from a specific day into a workbook, but not from a month/year.
how to import an excel data file into another excel file? I have a file with a tab full of data that I need to import into another file and then I have to manipulate the data. I have figured out how to use an opendialoge box to select the file but after that i'm not sure how to get it into my file.
I have a variable ("DestFile") that defines a path to a file (used in saving the file)...
I'm in the process of getting a Sub to hyperlink to this file, but in some circumstances, I may only want to hyperlink to the folder, not the actual file...
How would I go about trimming the "DestFile" address to get a "DestFldr" address?...
An example of "DestFile" might be; S:BryanFor KenGulf ConstructionST0609014-t.xls (the file name length may vary) What code can I use to consistently trim it back to; S:BryanFor KenGulf Construction as the "DestFldr" variable?
I have the following code written but I'm wondering if it's possible to modify this to change the red line to update to the path that the workbook is saved in? Meaning that User1Folder1 would change but [Workbook1.xlsm]Sheet1'E1 would always be the same.
I found following code on this site to extract txt files. As mentioned this code can extrack huge txt data to multiple sheets.
Sub ImportLargeFile() ' Imports text file into Excel workbook using ADO. 'If the number of records exceeds 65536 then it splits it over more than one sheet. 'If a file in a different format is to be imported amend the extension at line 10 Dim strFilePath As String, strFilename As String, vFullPath As Variant Dim lngCounter As Long Dim oConn As Object, oRS As Object, oFSObj As Object.............
However I am getting Run time error '-2147467259(80004005)': could not find installable ISAM for section 'Open an ADO connection to the folder specifiedin above code
I am trying to do, I have a master workbook (Formatter.xls) which contains a macro 'Import'.
When run, I want to open a series of workbooks - the filenames are listed in cells B3:B20, and the workbooks are located in the same folder as Formatter.xls
I am trying to open each of the workbooks listed in B3:B20, copy the entire contents of Sheet1 to a new sheet in Formatter.xls. The names of the new sheets are listed in cells C3:C20 in Formatter.xls.
The biggest problem is that I don't want to have to specify a path to the files to be imported. Since they are all in the same folder will this be a problem? Alternatively (and I have absolutely no idea how to acomplish this), would it be possible to have an input box to browse to the folder containing all of the files?
The reason that I can't specify the path is because it will be run on different computers and the locations / paths will change all of the time.
I have set of user-form contains with Combox & 2 textbox and to generate report one cmd button
I have 3 different sheet contains report of daily activities ( Dispatch,Closed,Cancel)
If Dispatchcalls Select In Combobox1 ,Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from dispatchcalls Then Save Data Into Excel File As "Dispatchcalls".
If Closedcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Closedcalls Save Data Into Excel File As "Closedcalls".
If Cancelcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Cancelcalls Save Data Into Excel File As "Cancelcalls".
"C:UsersmaniDesktopNew folderLenvo_ReportsONSITE CasesVlokupuf" This is path i stored existing 3 file dispath,closed,cancel
2. I need grab data from each of the files for a rolling 30 day period from the date specified in the sheet. The data needs to go onto the same sheet in Excel.Example: B2 on the "Settings" worksheet says 02-14-2014. So take data from 02-14-2014 minus 30 days (01-15-2014.txt) all the way up to today and consolidate it onto an existing worksheet called "Data."
3. If the date in cell B2 is changed, overwrite the data that was already retrieved and replace it with the new import from the new date.Example: B2 is changed to 01-31-2014. Now take data from 01-31-2014 minus 30 days and overwrite what was already imported in worksheet "Data."
I have a requirement to download a lot of historical data files from the archieve of an website. The url goes something like this: [URL]....
This downloads file for 21022014 ie. 21-Feb-2014. I need to be able to have a facility to have a selection criteria on my user form (in excel) where I specify a date range and the macro automatically downloads all the valid excel files available within that date range (files for Saturday, Sunday and some holiday dates will not be available in the website archive database) one after the other (like at single clcik of button) into a specific location (predefined viz.. c:/Users/EOD files/) on my laptop. Best would be if I am able to select the save location run time by using a 'Browse' like feature where I go and choose my local laptop folder...same type when we try uploading a file from our laptop to the web..
How to save a file, with file- name. but the directory is to be read in worksheet "towns" in Cell1 (brussels) and filename in worksheet "names" in cell B2 (i.e. winter), so it saves to c:russelswinter.txt as a wordpad or kladblok txt file, that keeps a number, so each time we push a button "go back from worksheet names to worksheet towns" the "number" that is saved in the txt document goes up by value +1. In Flemisch, the "old" code goes as follows, and saves the number in the txt file Factuurnummer7.txt. But I want that the file name (here: FactuurNummer7) can be a variable text issue, which has to be read - as already noticed - in cell B2 (with the word WINTER). So the are 2 worksheets: towns, ans names
pad$ = Application.DefaultFilePath 'controle = Dir(pad$ + "FactuurNummer7.txt") 'If controle = "" Then GoTo EerstAanmaken 'Open pad$ + "Factuurnummer7.txt" For Input As #10 'Input #10, Nummer1 'Close #10......................
Below is the current code I have for File Copy before the workbook closes. This file will be distributed all over and obviously will not have the same old path and new path locations as I have in my code also will not have the same file name. Is there anyway to still perform the file copy without knowing the old path and file name and possibly have message box pop up to ask the copy to location and use that in the new path string?
Sub Macro1() Dim fs As Object Dim oldPath As String, newPath As String oldPath = "I:EXLDATAMC Daily" '<---Where the file is currently located newPath = "H:South RegionOrlando Mail Services2008DI" 'Since the super shared drive is super slow we will just copy and replace this file each time before we close and of course after we save Set fs = CreateObject("Scripting.FileSystemObject") fs.CopyFile oldPath & "" & "OrlandoMail.xls", newPath & "" & "OrlandoMail.xls" Set fs = Nothing End Sub
I need to open an excel file based on a date mentioned in the file name, but minus 1 day. The file name is composed with Statistics_date_time.xls
Example: statistics_20140423_142754.xls
Once I need to open the file (only in the mornings), it has to be the one from the previous day to see the yesterdays performance. How can I create a macro that will look at the date in the file and take the one from yesterday?
This will be a part of a macro I'm making. The rest of the macro will just format the file and combine a few ones from different departments.
I just found a code to copy file path and file contents. However it is copying folder path and folder contents.here is my requirement.I will specify a path, macro has to copy that file name in a particular cell, then it has to copy all its contents. ex:
file name 1 has 3 sub files in it, file name 2 has 2 sub files in it--
Actually i've downloaded Tracking report of my SPO and this report is on 4-5 csv files (1 file per week). I have to gather data from these 4 files into one Worksheet. I have to do this with command button on my worksheet; with Open file dialogue box (i want to locate the csv files).
CSV files are something like that (I need only first 4 columns):
and my Worksheet is like that (With a command Button):
I want to import first 3 columns of csv file on first 3 columns on my worksheet; leave 2 columns blank and then import the 4th column... now for example i have done importing data from 1st csv file and the data is on 50 rows.. i click the command button again, locate the 2nd csv file.. do the same thing (import 1st 3 columns, 2 blank, then 4th) --from 51st Row-- and so on...
I have a workbook with many spreadsheet named Sheet1, Sheet2 and so on. Each sheet is filled completely upto 65536 rows. This data is being picked up from a CSV file. In this file there are sites with each site there is a assciated set of data. What happens is the data that extracts data does not differntiate between sites and when it reaches to the end of worksheet it splits the data into next sheet. So I am trying to create a macro to check each spreadsheet starting with the last sheet in the work book for example last sheet in the workbook is seven it should go to sheet6 and if there is a blank row after row 64000 it should cut all the rows and move them to sheet7. Then it should goto sheet5 and do the same and keep on doing it until it reaches sheet1.
Each month I am sent a spreadsheet which contains a list of 100's of different file paths (including file name).
For example (Quater 1 is the document name) R:ManagementJohn2008SalesSectionAQuater1
I would like to remove the file name from the file path (I will then convert the file paths to hyperlinks which will open the folder the document is stored in but not the document itself.
I am trying to separate a filename from a filepath in Excel VBA 2003.
I am using the Application. GetOpenFilename command to get the user to select the correct file. However, this also seems to record the filepath.
I am trying to separate the filename out of this so that each file( name) activates a different sub procedure. I am storing the result of the getopenfilename as a Variant.
At the moment I am having to specify the full path in order to get each sub to run. This is fine for 1 user - but not for others as the files are stored in different locations for each user.
I'm using this code to import a file, but I want to be able to save just the path (with no file name) to a variable to use for the output file. This code saves the path and file.
Any help would be greatly appreciated. I didn't know but what there was a function that I could apply to the 'FileName' variable that would remove the file name...don't know.
How can I get the name of a workbook WITHOUT the path when I have the name WITH the path?
To be more specific. When I use "Application. GetOpenFilename" the result is a file name for say "my_book" including the path. With this I can open the file using "Workbooks.Open" and Excel will show me "my_book". But when I want to reference this workbook later on in say "Workbooks(my_book)", then I need the file name without the path. How can I get that one in VBA?
Till now I was using "CurDir" to find out the path after opening the file and just subtracted it from the full file name. This seamed to be fine. But now I had a situation where CurDir gave me a path with abbreviations (~),
I have got a master workbook and I have written macro to copy and paste data on another workbook. write a macro to save the new workbook to a file path with a file name where both file name and path are stored in master workbook sheet...
I have a WinForm, which I'm calling via VBA's Shell command:
Code: Sub Button1_Click() Shell "C:TemplateFuncitons.exe " + ActiveWorkbook.FullName, 1 End Sub
I made this module an Excel Add-in and added it as a button in the quick access toolbar. Now, the idea is for the WinForm.exe and the Excel.xla to always be in the same directory (go hand in hand). I want to make a relative path for the .exe which will be the path to the folder where the .xla is + the string "TemplateFunctions.exe" in the end.
I am having trouble with a macro of mine. Essentially it opens a file, based on user input (Full path is stored in variable FilePath), but then I want to select that workbook, and therefore need just the .xls filename. I figured I would create a new variable, FileName, to pull out the filename.
How can I edit the string in my macro to extract just the filename.xls from the full path?
