I have a program in unix that ouputs a text file in .csv form which allows me to import my data into an excel spreadsheet very easily. I am wondering if there is anyway I can add formatting, like to tell excel to make a cell green or something like that.
If it can't be done with .csv, is there any other tool or format available that will accomplish this?
My current solution is to filter the Master Log so I only see Region 2, copy everything, then paste over Region 2, and repeat with 3, 4 and 5.
I have a master log (attached) that I import using Microsoft Query to 4 other spreadsheets (called Regional Logs), depending on the contents of the column "Region." I have all this figured out, but I can't figure out how to have the highlighting persist through the export and refresh. I don't think the attached file has any highlighting, but how I use this is I edit the Master Log throughout the week and highlight changes as I go. Coworkers use the 4 Regional Logs throughout the week to monitor different cases, particularly the new ones, so they need to see all changes for the week highlighted in yellow, which means the Regional Logs need to be linked to the Master Log and the highlighting must be visible any time a coworker opens the Regional Log. In addition, they are emailed across the state to county directors and they need to see the yellow-highlighted data, as well.
Currently, when exporting data using MS Query, no formatting persists. How can I ensure the highlighting persists? Or, is there another way to easily export the data, depending on the contents of the column "Region", which would allow the highlighting to persist
I have to import data into Excel from Access (yes, I have to import it to Excel and cannot use Access exclusively). When I import; however, the formatting does not come over correctly, most especially losing the formatting of numbers. I need one of two solutions:
1.) How to get the formatting to move over correctly?
2.) Or how I can save the formatting of a table, then be able to apply it as a "saved" format? The biggest thing is that the numbers will changed the number of decimal places and/or change from general numbers when I want to see them as currency.
The top table shows how i want this formatted, the bottom shows how it is importing.
i have a script to import a workbook which works fine, but when the data is imported i would like to have all the data in the cells aligned to the left of the cells, as im new to vba i can work this out.
Below is the script i'm using to import.
I would like this to aligned all cells to the left and centered when imported.
Sub tst() With workbooks.open("C:example.xls") with .sheets(1).usedrange thisworkbook.sheets(1).cells(rows.count,1).end(xlup).offset(1).resize(.rows.count,columns.count)=.value end with .close False End with End Sub
I want to import data from the web into Excel, but the data I want come from the result of a query - I have to enter a few parameters and get the results. I would like to import these results into Excel but although I can enter the website for Excel to look at I cannot figure out how I can enter the parameters to generate the results.
I am having a little trouble with this piece of simple code that just seems to be not working the way i want to. I can't figure why it won't work.
Private Sub CommandButton1_Click() Sheets("Global").Select Range("B5:F19").Copy Range("B25").PasteSpecial (xlPasteAll) Range("B5:E5").ClearContents Range("B7:E7").ClearContents Range("B11:E11").ClearContents Range("B13:F13").ClearContents Range("B17:D17").ClearContents Range("B19:D19").ClearContents End Sub
for some reason if i try to do Range("B5:F19").Select and then do Selection.Copy, I get an application error message. This has never happened before and for some reason it just started to act up. If you want to know what it does when I run this macro.. it actually doesn't go to Sheet "Global" it stays in the same sheet and does all the copying/pasting/clearing in the same sheet as the button is. I made sure that the tab is "Global" and i have confirmed caps. spaces everything.
I have been asked to develop a dashboard for my company. The data source for my dashboard is Tally ERP 9.The problem is I am not getting how to access this data into excel. I have tried MS Query but the imported data was not what I was expecting.
I have 5 or 6 macros set up to import stats from the internet to specific sheets. I want all of my imported data to be pasted starting at A1. However when i run these macros, the data IS pasted at A1, but when i run it a second time (or the next day after the pages have been updated), it pastes the data BESIDE the previously pasted stuff. here's what i mean..
say my imported data spans columns A to S.. everything's fine. but tomorrow i want to update the data so i run the macro again. well, it pastes the new data to A1 and again it spans from A to S like it's supposed to, but now it also tacks on the same paste job from S to, AG for instance.here's the code... There are currently 5 macros that have this problem. I thought by selecting A1 as the starting point, i could alleviate all of this but apparently not.
I have the following code that I cobbled together from various recordings of data imports and queries. The problem seems to be in my WHERE statment. I get a "Run-time error '1004': Data type mismatch in criteria expression."
I need to create an statement for my clients. Book A has all of the account balances. Still in book A, the account number is in column A, and balance is in column H. I just need to import from Book A into Book B, based on account number. Now on Book B, the account# is in column A and the balance needs to go to column B.
I am using Microsoft Excel 2003 and I am trying to import data from one worksheet to another. I found out how to import the data, but I can not find out how to get the data that I am importing to go into the labelled cells that I want them to go into. Is there any way that I can get Excel to do this, or am I searching for something that can't even happen?
have been trying to work out how to copy data from a website into a worksheet. For some reason the Data > Import External Data > New Web Query route does not work so I have tried the code below but cannot get this to work either.
What I am trying to achieve is to copy each of the various tables on the page into Excel.
Dim WebCopy As Object Dim WebtitleCopy As Object Set WebCopy = Sheets("Sheet2") WebCopy.Cells.Clear
I need to import data from an Access table (which is straightforward enough), but there's a snag. All the rows are dated (10 rows per day) and I want to start from a specific date and get everything after that date.
Anyone any ideas if this is possible and, if so, how to do it?
I'm trying to import a data from a website using Microsoft Excel however the link is too long & when I do import data from web & I past the link in there, it says that it's too long and it won't let me.
I am writing this code as a user prompt when importing data but getting an error when it goes to add the text to the worksheet.
Sub CheckForUndetermines() Dim Und As Range Dim Inp As String For Each Und In Range("E1:E200") If Und.Value Like "*Undetermined*" Then Und.Interior.ColorIndex = 6 If Und = "Undetermined" Then Inp = Application.InputBox("Invalid or Negative", "Undetermined Value", "Negative") If Inp = "False" Then Exit Sub If Inp "" Then Cells(Und, 3).Value = Inp Und.Interior.ColorIndex = 0 Next Und End Sub
I need some sort of loop that will pull from another excel sheet (Data> Import>etc) all items in col A then it will excute a calculation then save that calculation, then I need it to pull all values from col b excute the calculation, then Pull Col C etc.. It needs to end up pulling and saving about 500 cols. I have the calcuation and saving part working I just can't figure out how make it pull the next col from the other excel sheet.
I have two spreadsheets. One with 1,000 names and addresses, the other with 5,000, names addresses and birthdays.
Within that spreadsheet of 5,000 contain the same 1,000 contacts as the other spreadsheet. How do I import the birthdays of the 1,000 contacts without doing it by hand. Is there a macro or forumla that could do this?
I am basically looking to create a VBA program that will automatically download (application .OnTime method) stock prices from the ASX. I am very new at this and dont really know how it all works. Is this an advanced VBA or can I be shown without too much hastle?
I am importing information from 20 stores by item. If a store doesn't carry an item it is not creating any data for that store but in turn it throws my whole template out of whack. The graph would be a repetitive 1-20. Can I create this pattern and import the information to match while creating blank cells when the data isn't available? I manually entered the left column and the items columns "B" on are imported.
When I copy or import data from access to excel, excel does not read the cells as numbers or letters. If I type the value over the access letter or number, then it reads it. Is there a way to copy or import it so excel can read it?
I can't use =Value(A1) because the data contains both letters and numbers.