I need to create an statement for my clients. Book A has all of the account balances. Still in book A, the account number is in column A, and balance is in column H. I just need to import from Book A into Book B, based on account number. Now on Book B, the account# is in column A and the balance needs to go to column B.
View 3 RepliesI have created a workbook that imports data from another workbook which is used frequently on a network drive. After I import the data to my new workbook, it locks the original workbook for editing. Is there a property that will allow me to disable this 'locked for editing' read only mode or any other way to get around this?
View 6 Replies View RelatedI have one workbook for daily records of multiple data items.
These data are summed according to each item and exported to a specified cells in a monthly report.
Is there an alternative easier method to import data other than using "paste special" property.
Due to some cutbacks the company I work for has taken away the database system we used to use to record debts owed to us, so I'm building one in excel (no access or sql otherwise I'd use those). We have all the debt in seperate workbooks by financial period and I'm creating a new workbook that will upon entering of a specific financial period will pull information from the pertaining workbook and report on the information.
I have a Formula
=INDIRECT.EXT(CONCATENATE("'C:Documents and Settingshughel13My Documents[",Reports!$C$11,".xls]Sheet1'!R2:R138"))
Among others which pull other ranges
Which as I understand should work just fine on a closed workbook, however it only works when the target workbook is open.
When the workbook is closed the formula only pulls the first value in the range.
On a related note the above formula and it's counterparts are autofilled down the page from 2 to 1000 as some of the workbooks have 1000 records to pull, however the ones that dont have that many, cause errors when the data is pulled, is there a way to make it so that if the cell it's pulling from is empty it doesn't pull from it or pulls a value of 0?
I am importing external data to "Workbook A" from the source workbook, "Workbook B." Workbook A is set up to refresh every 15 minutes. Workbook B is shared. I am recieving an error saying either, the 'file is in use', or 'the file is locked,' depending on the senario.
Scenario 1:
1. I open A and enable data connections.
2. I try to open B, but receive the message: '(File location...) is in use. Try again later.
Scenario 2:
1. I open B.
2. I open A.
3. I go back to B to edit information.
4. When I try saving the information I get the following message: 'File is locked. Try the command again later.'
I need to be able to have A open and periodically refreshing. I also need to allow users unhindered access to B at the same time.
I have a Excel workbook (wb1) where the columns are showing the months and the rows are showing different actions/activities. If an action takes place in a specified month the cell corresponding to both the action and the month is marked yellow.
In another workbook (wb2) I want to be able to retrive data from wb1. What I want is that when wb2 is opened it should do a search in wb1 to find the first action/activity that takes place in the current month. The activity/action text should be imported to a textbox or cell in wb2.
I am using the (borrowed) code below to select and import a worksheet into my workbook.
View 8 Replies View RelatedI have a workbook that contains over 100 worksheets with stock data and price information. It uses a screenscraper to update the workbook each day with the latest day's price, and then exports each of these .csv files into a local directory. The macro for this is working. In effect it is generating a price history file automatically in my absence for me that can be read by charting software.
What I would like though is a macro to loopthrough and backfill missing price histories on each worksheet. I have a source of .csv price histories already, but would like to avoid having to cut and paste each of the 105 files manually, as it may become a regular occurence.
Each worksheet that requires backfilling has the stock code in the cell "A2", so that can be used to search for the filename Range("A2") & ".csv"
This is as far as I have got - however it results in a runtime error (91) Object variable or With block variable not set, pointing to this line:-
VB: Workbooks.Open Filename:="D:FinancialData SheetsSpreadsheetsPension" & Ws.Range("A2").Value & ".csv"
VB:
Sub BackFillData()
Dim Ws As Worksheet
For i = 1 To 105
'Sheets.Add
ActiveSheet.Name = "Fund" & i
[Code] ......
I am troubleshooting my macro that seems to cause a data shift with the Letter "F" when I import multiple CSV files into one spreadsheet. When I go outside of the macro and record a macro and import the CSV into a workbook it works perfectly fine. But there must be something in this code that is causing the shift:
VB:
Private Declare Function SetCurrentDirectoryA Lib _
"kernel32" (ByVal lpPathName As String) As Long
Public Function ChDirNet(szPath As String) As Boolean
Dim lReturn As Long
lReturn = SetCurrentDirectoryA(szPath)
[Code] ....
I have attached an excel workbook that shows how the macro imports vs. a regular import. Why "F" is causing a shift in the data.
Data.xlsx
Need code to import a worksheet (there is only one) from another workbook. But I just get gibberish when I import it. Both files are .xlsx files.
Here is my code below. I used this to import a CSV file. I don't know if I can't use this to import excel files, but it just doesn't seem to work for me.
Code:
Sub load_ClientCustomerData()
dim fStr as string
With Application.FileDialog(msoFileDialogFilePicker)
[Code].....
I found this code on the net, and it works, it DOES import the sheet specified from a closed status, but it adds 0 where there were blank cells.
The worksheets are static, the names will not change, but the information on them varies in # rows but the # of columns depends on the page..
The use of this import is to upgrade the program, by importing the sheets from the old version.
The first part browses for the file, which is good, because it could be stored anywhere and named anything.. I have it set up to "Click to Import"....
Private Sub CommandButton1_Click()
GetValuesFromAClosedWorkbook "C:", "Book1.xls", _
"Personnel", "A:H"
End Sub
This next part does the importing, but it fills all the columns and rows that were blank with 0's and fills all the way down to 65536 thru my column H that I specified that had data above.
Sub GetValuesFromAClosedWorkbook(fPath As String, _
FName As String, sName, cellRange As String)
how this code can be modifed to do the following..
Detect and copy ONLY the used range of the closed workbook.
I have a workbook called summary with a sheet called "detail" I have 4 workbooks Called week 1, week 2, week 3 and week 4. All the week workbooks have a sheet called Summary. I need to import the summary sheets from each week workbook into the the detail sheet. All workbooks are in the same folder. I need to only copy columns A,D,F,G.
If someone can post code or point me towards a thread I can figure what changes need to be made. I am getting better but slowly!
I am using excel 2003. I have more than 500 text file which are result of some numerical analysis. I have another bunches of the same file number. I can record and play around with macro.
What I want to do is
-copy selected cells from imported text file in excel and paste in new or in first opened excel file. I have recorded macro for one file including importing from text to excell, copy and paste the selected file (look the macro below). But I have more than 500 files and I want to do the macro the same thing for each file in one excell file. Do i have to make one macro for each file??, that takes much more time than manual import and copy paste. The cell position and range to copy is the same, but have to be pasted in new row (in one excel summery file). The file name of each text file is different and all are in the same folder.
Sub text_to_excel()
Workbooks.OpenText Filename:= _
"I:ResearchVALERI_germinationvaleri_slopevaleri_slope_COREL_DHPoutputDSCN2589.txt" _
, Origin:=xlMSDOS, StartRow:=1, DataType:=xlDelimited, TextQualifier:= _
xlDoubleQuote, ConsecutiveDelimiter:=True, Tab:=True, Semicolon:=False, _ ..................
i have a script to import a workbook which works fine, but when the data is imported i would like to have all the data in the cells aligned to the left of the cells, as im new to vba i can work this out.
Below is the script i'm using to import.
I would like this to aligned all cells to the left and centered when imported.
Sub tst()
With workbooks.open("C:example.xls")
with .sheets(1).usedrange
thisworkbook.sheets(1).cells(rows.count,1).end(xlup).offset(1).resize(.rows.count,columns.count)=.value
end with
.close False
End with
End Sub
I want to import data from the web into Excel, but the data I want come from the result of a query - I have to enter a few parameters and get the results. I would like to import these results into Excel but although I can enter the website for Excel to look at I cannot figure out how I can enter the parameters to generate the results.
View 5 Replies View RelatedI am having a little trouble with this piece of simple code that just seems to be not working the way i want to. I can't figure why it won't work.
Private Sub CommandButton1_Click()
Sheets("Global").Select
Range("B5:F19").Copy
Range("B25").PasteSpecial (xlPasteAll)
Range("B5:E5").ClearContents
Range("B7:E7").ClearContents
Range("B11:E11").ClearContents
Range("B13:F13").ClearContents
Range("B17:D17").ClearContents
Range("B19:D19").ClearContents
End Sub
for some reason if i try to do Range("B5:F19").Select and then do Selection.Copy, I get an application error message. This has never happened before and for some reason it just started to act up. If you want to know what it does when I run this macro.. it actually doesn't go to Sheet "Global" it stays in the same sheet and does all the copying/pasting/clearing in the same sheet as the button is. I made sure that the tab is "Global" and i have confirmed caps. spaces everything.
way to import the data from this link into an excel so that all the data will be listed in columns. IE: Association name, contact, advisor, etc....
So far I have not found an efficient way to do this through importing the data.
I have been asked to develop a dashboard for my company. The data source for my dashboard is Tally ERP 9.The problem is I am not getting how to access this data into excel. I have tried MS Query but the imported data was not what I was expecting.
View 1 Replies View RelatedI have 5 or 6 macros set up to import stats from the internet to specific sheets. I want all of my imported data to be pasted starting at A1. However when i run these macros, the data IS pasted at A1, but when i run it a second time (or the next day after the pages have been updated), it pastes the data BESIDE the previously pasted stuff. here's what i mean..
say my imported data spans columns A to S.. everything's fine. but tomorrow i want to update the data so i run the macro again. well, it pastes the new data to A1 and again it spans from A to S like it's supposed to, but now it also tacks on the same paste job from S to, AG for instance.here's the code... There are currently 5 macros that have this problem. I thought by selecting A1 as the starting point, i could alleviate all of this but apparently not.
I have the following code that I cobbled together from various recordings of data imports and queries. The problem seems to be in my WHERE statment. I get a "Run-time error '1004': Data type mismatch in criteria expression."
View 2 Replies View RelatedI am using Microsoft Excel 2003 and I am trying to import data from one
worksheet to another. I found out how to import the data, but I can not find
out how to get the data that I am importing to go into the labelled cells
that I want them to go into. Is there any way that I can get Excel to do
this, or am I searching for something that can't even happen?
I am importing the NFL standings into a worksheet - [url]. In the Home, Road, AFC, NFC & DIV columns, the team records are showing up as dates....
View 9 Replies View Relatedcan use data from an Access table in my Excel functions without importing the Access data into the wookbook.
I set up a connection to the Access table that I need, but don't know what the syntax would be to reference those fields in functions in my Excel sheet (or if it's even possible).
My problem is that the Access table is large and I want to keep the size of the Excel workbook small.
have been trying to work out how to copy data from a website into a worksheet. For some reason the Data > Import External Data > New Web Query route does not work so I have tried the code below but cannot get this to work either.
What I am trying to achieve is to copy each of the various tables on the page into Excel.
Dim WebCopy As Object
Dim WebtitleCopy As Object
Set WebCopy = Sheets("Sheet2")
WebCopy.Cells.Clear
[Code].....
creating a macro that would do the following upon importing data:
Sort by column J
If column J = ph then delete row
If column J = phg or azg and k >0 do not delete row and multiply column L by .045
If J = az then multiply column L by .083
how to export and import data to and from my spreadsheet.
example:
-I have data range ( both numbers and text ) A1:F30 in sheet1
-I launch a macro and the macro asks me for a file name and location to where save the data ( does it have to be an .xls type file? )
-Conversely, I launch another macro and this time I'm asked to select a file that will transfer its data unto my spreadsheet
I need to import data from an Access table (which is straightforward enough), but there's a snag.
All the rows are dated (10 rows per day) and I want to start from a specific date and get everything after that date.
Anyone any ideas if this is possible and, if so, how to do it?
I'm trying to import a data from a website using Microsoft Excel however the link is too long & when I do import data from web & I past the link in there, it says that it's too long and it won't let me.
View 9 Replies View RelatedI am writing this code as a user prompt when importing data but getting an error when it goes to add the text to the worksheet.
Sub CheckForUndetermines()
Dim Und As Range
Dim Inp As String
For Each Und In Range("E1:E200")
If Und.Value Like "*Undetermined*" Then Und.Interior.ColorIndex = 6
If Und = "Undetermined" Then Inp = Application.InputBox("Invalid or Negative", "Undetermined Value", "Negative")
If Inp = "False" Then Exit Sub
If Inp "" Then Cells(Und, 3).Value = Inp
Und.Interior.ColorIndex = 0
Next Und
End Sub
I wish to surf to a website and retrieve the bottom entry in a column The column updates dynamically with a new number added to the bottom on a daily basis.
Here is the website URL: http://global-view.com/fxhist.TXT.
The column I am interested in is the second column from the left under the History section. The column contains close prices for the currency symbol EUR/$.