Importing 4 Sheets From 4 Books To A Sheet In Another Workbook
Apr 8, 2009
I have a workbook called summary with a sheet called "detail" I have 4 workbooks Called week 1, week 2, week 3 and week 4. All the week workbooks have a sheet called Summary. I need to import the summary sheets from each week workbook into the the detail sheet. All workbooks are in the same folder. I need to only copy columns A,D,F,G.
If someone can post code or point me towards a thread I can figure what changes need to be made. I am getting better but slowly!
Need code to import a worksheet (there is only one) from another workbook. But I just get gibberish when I import it. Both files are .xlsx files.
Here is my code below. I used this to import a CSV file. I don't know if I can't use this to import excel files, but it just doesn't seem to work for me.
Code: Sub load_ClientCustomerData() dim fStr as string With Application.FileDialog(msoFileDialogFilePicker)
This next part does the importing, but it fills all the columns and rows that were blank with 0's and fills all the way down to 65536 thru my column H that I specified that had data above.
Sub GetValuesFromAClosedWorkbook(fPath As String, _ FName As String, sName, cellRange As String)
how this code can be modifed to do the following..
Detect and copy ONLY the used range of the closed workbook.
I'm trying to copy rows from one workbook that is exported from access to multiple worksheets in multiple workbooks. I used a macro I found here from JBeaucaire that will copy the data for me but it over writes the information I have in rows 1-3 and also the rows below, 28-35.
Is there a way to copy the data without loosing the information in the first three rows and the rows below where the data goes?
Ive put some sheet code together that i need copied to 12 sheets (jan to December) in 24 workbooks (each workbook has trhe same sheet names). I dont want to alter the actual content of the Excel sheets, I just need to copy VB code from a template (in VB editor) to the 12 sheets in each of the workbooks. Is this possible to do with VB or do i need some other utility since Im using the VB editor....
I have 6 spreadsheets all within the same folder, these are pretty much identical (rows, colums, sheets within them) apart from the names of the files.
I then have a master spreadsheet within the same folder where I want to combine all the data, from all the sheets within each book (if that makes sense!) apart from the data on the last sheet within each book as this is the reference data, onto one sheet within this master file. If possible I only want to copy rows accross which have complete data too.
So: (names not correct) From book1.xls copy all data on sheets (sheet1, sheet2 etc) except last sheet From book2.xls copy all data on sheets (sheet1, sheet2 etc) except last sheet combine onto masterfile.xls on sheet1.
I have searched on here and can only find how to do it with the first sheet in each workbook, not looping through all the sheets in each book. Please see below.
I have created a workbook that imports data from another workbook which is used frequently on a network drive. After I import the data to my new workbook, it locks the original workbook for editing. Is there a property that will allow me to disable this 'locked for editing' read only mode or any other way to get around this?
I'm trying to find the simplest way (macro I guess) to copy a row into a corresponding workbook. This is for a registration workbook.
This workbook has a demograhics sheet (the main sheet), which will have the persons name, dob, and a few other identifiers. It will also have a column for a registration person to enter the of the 4-5 workshops/classes that a student can be enrolled in. For the sake of argument these will be numeric, comma seperated values 1,2, 3 etc.
I'll then have many sheets (one for each class) that are named 1-Employee Morale, 2-Interoffice Relationships, etc.
Is there an easy way that upon entering a new row in the demographics sheet, the persons name can be copied to the class list? Esentially I'm trying to have one master list of all students and the classes they are signe dup for, and then a printable list for each class that can be given to the instructor.
I know you could probably do a macro, run it once, and do it after everyone is registered, but we would prefer that the data populate based on a trigger or something as each row is entered. The sheets for each class could be named numeric so if you entered 1,2,3 as the classes then the sheets 1,2,3 (names) would be populated.
I'm currently writing a macro to check for changes between versions of a spreadsheet. I'm having a problem looping through the sheets and selecting equivalent (named the same)sheets in both sheets. My attempt at code (stripped down a little) is here.
Option Explicit Sub Difference_Checker() Dim Check As Boolean Dim Row As Integer Dim Column As Integer Dim ColRef As String Dim MaxLength As Integer Dim MaxWidth As Integer Dim i As Integer Dim j As Long Dim Shtname As String Dim StartTime As Variant MaxLength = 100 MaxWidth = 256 'Set Application Settings Application. ScreenUpdating = False Application.EnableEvents = False Application.Calculation = xlCalculationManual....................
I have 20 excel files each having more that 1000 records, the format and header for all the files are same.
I need to consolidate all these 20 different files into one excel sheet, having only one header row at the top. Since I need to perform this step frequently, I am planning to automate it.
Haven't done any VBA in a long time so I'm very rusty. I need to copy cells A2 - G2 from sheets 2 - 30 in a workbook to create rows Sheet 1, which will start out blank. This is the final part of longer process. Sheet 1 is used as a summary page.
I have a spread sheet with tabs that are for each week of the year. Each tab shows the date on top and times (broken into 30 minute intervals) on the side; the inside has information like an event on the inside.
My goal is to keep that information there and to have a "master sheet" that holds all this information in a list format so I can filter out some information.
Well this excel workbook has lots of sheets each for a specific region eg, Europe, austin etc and also sheets which have relevant data that gets used in the formula.
Now, say for eg lets considered the sheet called austin.
it does the calculations on the headcount needed for call center. so the columns refer to a formula called gets() which then calls the erlanc function.
Now the problem here is this gets() function takes a value called calc
and this calc just a cell in one of the sheets called table. Now if I change the headcount value in the austin sheet nothing happens. Then I need to change the value of calc cell say make it to 5 or 6 and hit enter. It starts calulating the values to forecast thye headcount, but it does so for all the sheets . so it is taking a lot of time.
computer just doesn't have the horsepower to run all of the sheets and the formulas and put them together on one sheet in the same workbook.
I was wondering if it would be possible to take the identically arranged sheets from one book and paste the VALUES over to One page in another book.
I'm guessing you'd need to know the directory of the workbook and the title?
Below is the macro i run to compile in to one page in same workbook: (Summary3 is an arbitrary name for the new page, HEADERS is the name of the page that holds the headers for all of the categories, 2014 URL, RAP and DB_Template are the three sheets that I don't want to copy in to this new page)
The headers are in each sheet from B2:DL2 and the data would be from B3:DL75.
I am looking for an update to the following macro that would paste all of the VALUES from each of these sheets in to a new workbook on a single page.
Sub CopyAll() Dim ws As Worksheet Sheets.Add.Name = "Summary3" Sheets("Summary3").rows(1).value = Sheets("Headers").rows(1).value For Each ws In ActiveWorkbook.Worksheets ws.Activate If ws.Name <> "2014 URL" And ws.Name <> "RAP" And ws.Name <> "DB_Template" And ws.Name <> "Summary" Then Range("B2:DL75").Copy Sheets("Summary3").Range("B" & Rows.count).End(3)(2) End If Next ws End Sub
I want to merge different worksheet of an existing workbook into one by macro .I did not want to repeat the rows label for each worksheet data.Also I want to get at right hand side i.e in G column the data to be extracted for respective worksheet in the merged data.I have enclosed in attachment an expected solution in a sheet name "merged".However the number of worksheet is here only 3 for sample purposes.However,in reality there is more than 3 .
I am trying to set up a new workbook for my home accounting, this will consist of a seperate sheet for each item which will store the monthly payment data and a master data input sheet, where i intend to select the month and year from a drop down list, then input the amount in each entry for that month. hopefully i will then be able to hit enter and all data will be sent to its corresponding position in its relevent sheet.
I want to create a macro that will allow me to copy a specific area or dataset of one sheet to all of the other sheets within a workbook. For example, on my first sheet, i want to copy A1:C3. I want that information to show up on all the other sheets in A1:C3.
I have 30 and above sheets in a work book and like that I am having 5 such books. The sheets are named as 201, 202, 203 ....etc as per the contents in that particular sheets. (201, 202 .....are the P.O nos.). all the work sheets are of having similar format of datas.
Now what I need is if I want to look the details of one single sheet (say 324) I have go all the sheets one by one and it is hard to find out.
If any body give me a solution so that if I type a particular no. (forms part of the name of the sheet) that sheet should appear for me.
Call all data in new workbook or in single sheet from different sheets (except 1 or 2 sheet) of workbook. i already use some macro to hide some data from sheets so i want only filtered data.
I have 2 sheets which validates data using vlookup.
Sheet1
Table 1ABResult1121232313
=VLOOKUP(A7,B:B,1,FALSE) is the formula in result1 column. Sheet 2
Table 2DEResult21020102040203010#N/A
=VLOOKUP(F7,G:G,1,FALSE) is the formula in result2 column.
The basic idea of these vlookup is to check whether the data present in A or D column is present in B or E. If the data is there then it will be retrieved in "Result1" or "Result2" columns. If not then the result would return the value "#N/A".
What im trying to do is to copy the resultant data(from Result1, Result2) other than "#N/A" from individual sheets to a final consolidated sheet.
i want to import data from multiple excel files (with same kind of data) into a master file with each import want to display name of the file from which the data is imported in last column on all rows. for example if file 1 has 10 rows with file name abs, after import the macro show display on all 10 rows in a blank column abc. then import second file and its name and so on.
I am importing some data from a website into several sheets but when I refresh it I am not able to access the data as numbers. I am using a sumif to collect the data. See the attached sheet. if there is a way to do this without sumif, that would work as well, but my numbers are not copying over to the main sheet because they are not being imported as numbers. also when the a and c are changed on the main sheet i want the values to change with them.
I have a workbook with many sheets labelled as mmm-yyyy. The constant columns in all the sheets are C,E,R,T, and U.
Is it possible to have a macro do the following: Add a sheet called Summary at the end of the workbook. From the last sheet of mmm-yyyy, copy columns C, E, and R to the Summary sheet. Copy columns T and U from all the other mmm-yyyy sheets to the Summary sheet. All the cells need to be centered.
