Importing Information Along With Formula
Jun 8, 2014
I am building a service for a company using software provided. The software provided will export the information into an excel sheet.
I am creating an A/B testing for 2 different areas of the site. I will be doing a daily/weekly and monthly figure reading. There will be 2 excel sheets, daily/weekly and monthly. I will need to put them into 1.
I want to somehow, import these 2 excel sheets so it automatically pulls the information I require into the relevant cells.
From there, I will create a percentage of what. Is this possible to do via excel or will I require other software to happen?
View 1 Replies
ADVERTISEMENT
Sep 20, 2013
I have a userform that will be a 'work order' for repairs. The ladies in the office can fill out all the blanks that will be entered into the spreadsheet. Each time someone is done, it will plug the information on the next available row on the spreadsheet. Easy enough.
What I need is putting a 'work order number' on the form. I have put numbers (101, 102, 103...) in Column A on the spreadsheet. I would like the form to pull the next available number and put it at the top of the Userform. I want this number to be 'locked' in so the ladies can't change it.
My goal - when the ladies are filling out the form, they can see what 'work order number' has been assigned and can give this number to the maintenance.
View 5 Replies
View Related
Jun 19, 2007
I have a large spreadsheet (1000-plus entries) that all have about 10 or 15 columns of information (product title, product number, etc).
I also made a form that I want to use as a master form, where all the titles will not change.
What I am wanting to do is, by going off the product number, when you click it, this pre-made master form will pop up, and all the information that was located on the large spreadsheet for this product number will be inserted where it is designated to be on the master form.
While I could probably do something like this through Access, we need to keep it on Excel, and in the same workbook so that it will automatically update things once I put a new number or input onto the large spreadsheet.
View 12 Replies
View Related
Mar 5, 2014
The idea is to select an item i one cell, which in return will affect the following cells with the nutritional values. So far so good. I would then like, if a given amount is entered, it calculates the values.
A food item is typed in Cell A. The following cells will Index Match a table (on a different sheet), importing calculation formulas based on the food items nutritional value (Cells C - G). If an amount is typed in Cell B (i.e. 100 grams) the following cells will then calculate the correct nutritional values.
i learned to make an INDEX MATCH function, so that when i type "Gulerod" or something like that, the following cells import information from the Table tab... When the table contains fixed values, this works just fine. However - i tried to make the table (the cells) with calculation formulas (i.e. =SUM(4*B3))... this means the values in the tables are 0 untill a value is typed in B3 (in this example).
... however when i do the Index Match in my main tab, only the "0"'s are imported, and no matter what value i enter in B3 in the main tab, the following cells remains with the fixed value 0.
... so my question is - is it even possible to have the Index Match function import the calculation formula from the table and have it work in the main tab as well? Or is there any other way to make this work in Excel? Basically - to have the main sheet find the relevant data to use for calculation on a different tab/sheet, and then do the actually calculations on the main tab/sheet.
View 5 Replies
View Related
Dec 17, 2008
=SUMIF($A$2:$A$9,F2,OFFSET($C$2:$C$9,1,0))
It works great.
The issue is that the information (time) that I import into excel doesn't show as information if there is a zero in front the amount of hours. I can physically see the information but have trouble using it. For instance if I add
(A1) 05:25:25
(A2) 10:25:25
(A3) 02:25:25
If I total/SUM this my total is 10:25:25. It will not recognize anything under 10 with a first digit as a zero. So for me to add this I use:
=SUMPRODUCT(B3:B25+0)
This also works great. Now on to my issue.
I am using the 1st formula to grab data i.e. (A1). It will not recognize that as anything. It comes up as zero. I can't figure out what to add to the 1st formula for it to recognize the info.
View 4 Replies
View Related
Jan 11, 2012
I have a timesheet worksheet that a previous employee created and I need to alter a formula. Unfortunately, I can no longer contact them.
Anyways, I need to alter an "if" formula that is associated with a drop down list. As of now, the drop down list is used for a 2 week period ending on a specific date. When the date is selected, the calendar automatically aligns the proper dates to the days of the week. I believe it is able to do this with an "if" formula that is used by the numbered days of the month. For example; if I select January 14th, 2012 as the 2 week period ending date,
On the 14th the "if" formula shows as this:
=IF(ISBLANK($P$2)," ",$P$2+1-1)
On the 13th, it shows as this:
=IF(ISBLANK($P$2)," ",$P$2-1)
I noticed a trend here with the last digits 2+1-1 and 2-1, so i attempted to go with this trend and add numbers as the dates went on, but it did not work.
I need to change this so that instead of a 2 week ending period, it is for a full month. So, if I were to select January 2012 or any month, all the days of the month would align correctly with their days of the week.
View 4 Replies
View Related
Mar 8, 2007
I have a excel file which shows some information about mobile numbers but i don't know from where that excel file get that information one formula have some reference of sheet2 but there is no sheet2 in excel file. how this excel file get information?
download excel file
http://www.geocities.com/mirag2001/celldecoder.zip
View 2 Replies
View Related
Oct 26, 2007
is possible to display the formula and value of the variables in a formula in a cell? e.g. if I enter '=A3+A5, the formula will appear in the cell. However, can I also have the valu of A3 and A5 in the same cell with the displayed formula?
View 5 Replies
View Related
Aug 8, 2014
I have been looking for a forumla that will put an 'and' between the last two bits of information.
Joe Bloggs
Peter Smith
Matt Jones
I have list of names in individual cells like above. I have figured out a formula that will put them into a single line (Joe Bloggs, Peter Smith, Matt Jones). But what I need is a formula that will put it into single line and insert an 'and' ALWAYS between the last two people. So it should show like (Joe Bloggs, Peter Smith and Matt Jones) but if I remove Matt Jones it should now display as (Joe Bloggs and Peter Smith).
View 11 Replies
View Related
Mar 30, 2008
I need to find a forumula that will enable me to transfer values from a table within the worksheet. Something along the lines of if I13 = A16 then need to enter the number that appears in A17 into cell 019, if I13=B16 enter number in B17 into 019. I also need the forumula to include if the figure in 113 is less than 3 then need to enter 0 into 019.
View 14 Replies
View Related
Jul 2, 2009
I have a spreadsheet designed for softball schedule for an entire league and am trying to come up with a way to count certain information so that I can figure out if the schedule is balanced. What I'd like is for a way to sum the number of games each team plays on diamond 3 or 4 and to sum number of games at 6:30/7:30/8:30
View 2 Replies
View Related
Jun 11, 2008
I am using the vlookup function accross two tabs. . . we'll call them TAB1 and TAB2. On TAB1 I have all my base information which I am referencing from, TAB2 is the sheet where i am using the vlookup formula to extract the information i need from TAB1.
Using cell B2 as an example from TAB2:
I used a vlookup formula in cell B2 and got the information from TAB1. The vlookup formula pulled, correctly, cell F17 from TAB1.
Instead of the formula reading "=vlookup(...)". I would like the cell to simply read =F17.
View 9 Replies
View Related
Apr 24, 2007
I need help with a formula so that I can create a single chart or (more likely) multiple charts for each of the choices in column C.
Attached is a sample of my spreadsheet.
I want to be able to break out each of the "Br#"(A) associated with the "BUM"(C) and graph each of the choices in column D (Run Time).
I am sure I can create the chart I need once I get the formula created to pull the data I am trying to combine. I hope that I have explained this well enough.
View 9 Replies
View Related
Jul 2, 2014
I need to pull information from a cell that is full of text and numbers and get it to creat a formular.
More information in the spreadsheet example
View 9 Replies
View Related
Mar 12, 2012
I have a Sheet1 that contains 900 rows of information 14 columns wide (C7:P7 are headers). Column M has an important date. The information is constantly changing.
On Sheet2, I want to display the upcoming dates, in numerical order for each row that's within 5 days of today's date. After the date has passed, it no longer needs to display on Sheet2.
View 1 Replies
View Related
Apr 26, 2012
I need building a formula to pull information from a database file. The purpose is to try to interpret the data so that I can analyze a time period along with it's content. I don't know how best to explain it. Basically I have a table and I want it to pull information based on 3 criteria: time, type, and total. I would like for the formula to identify a time frame, then identify a type, and then take the totals and add them together.
Time / Type / Total
11:31 /1 / 4
11:43 / 1 / 6
12:04 / 2 / 1
12:31 / 1 / 3
Time / Type / Total
11:30 - 12:00 / 1 / 10
12:00 - 12:30 / 1 / 3
The top is the database and the bottom is basically what I want to happen on the other table. Pretend the / and dividers for each column.
View 9 Replies
View Related
Dec 20, 2013
I am using a list like this.
A
B
C
D
1
Teacher
Name
Color
Size
[Code] ....
I need formulas that can evaluate the table above and provide the information below. If there needs to be multiple steps/formulas, I'm okay with that.
Two sticking points, BOLD - be listed twice with the same teacher. I don't want them counted twice in the "Size 3" column. BOLD & italicized- same student could be in two different teachers' classes. They need to be counted under both.
Teacher
Red
Green
Blue
Size 3
[Code] ...........
View 5 Replies
View Related
Feb 11, 2010
I have created a userform that allows input of information and then deposits the information on a specific sheet. I am looking for a way to have that information not only deposited on the specific sheet it is already set to but also to another sheet based on a selection made from a combo box.
here is my current
View 5 Replies
View Related
May 7, 2014
I am trying to get a grip on my gas n electric bills. My problem is in creating a formula to convert the info I have into the final bill.
The info I have is -: days of use, amount of G n E used, standing charge, price/unit and discounts applicable. For simplicity I have converted them all into a rate per day and £GB. I tried the following formula
:-(standing charge per day * days used)+(cost per KWH * No.of KWH used) - (discounts * days used) / (100) * (94)
This last one is to account for a direct debit 6% discount. I used cell address for things like No of days usage and KWHs used in the period. The values in these cells have themselves been calculated via a formula from other info. The results I get seem to be a constant variable which indicates that I am doing it wrong.
View 3 Replies
View Related
May 22, 2014
I need a macro to move specific information.
I get an excel sheet with W/C Employer: (whatever) entered below the patient it belongs to in column E. This information needs to move into its own column (H) in line with the above patient information so I can use it in a mail merge to word.
The same thing needs to happen with WC injury date listed in column G. It moves to column I. Then delete the row it was moved from so I don't have an empty row.
Sheet 1 is what I get. Sheet 2 is what I need to end up with.
View 4 Replies
View Related
Aug 13, 2013
I am trying to track inventory over 160 days in a spreadsheet. Every week I update a table that shows the number of skus and dollar amount that are over 160 days in a table. I have a ton of formulas that will automatically populate once I put in the new weekly data on a different spreadsheet. I want to track the weekly data so what I would really like to be able to do is paste the actual numbers and not the formulas into another excel spreadsheet so I can track the progress over time. Is there a way to just paste the actual numerical number instead of the formula itself?
View 2 Replies
View Related
Feb 17, 2009
I have a formula that needs some tweaking. This formula is to reference the ACCT and find the “best” contact information and return the result to the Merge sheet. If the ACCT does not have a Parent then you reference the ACCT to the abc_Phonelist sheet. If the ACCT does have a Parent then use the Parent ACCT since it has a more desirable account number to reference against the abc_Phonelist. If the ACCT or the Parent ACCT uses Processors then the ACCT from the Processors sheet has the best reliable account number to reference against the abc_Phonelist.
In sum, there are three different possible “number tiers” that can be used. The first, the ACCT phone number. This means that the ACCT has neither a Parent nor a Processor. The second, the parent ACCT phone number. This means that the ACCT has a Parent, but neither the Parent ACCT nor the ACCT has a Processor.The third, the Processor phone number. This means that either the ACCT or the Parent ACCT has a Processor phone number.....
View 2 Replies
View Related
Feb 27, 2009
I need 2 different formulas to generate commission reporting information on the Summary tab of the attached sample Excel file. The first is highlighted in green. For these cells, I need a sum formula that reports the total commissions (column H of the "Data" worksheet) for items Ordered in the month listed in column B of the "Summary" worksheet, but not invoiced until the month listed in the column D, E & F headers of the same worksheet. Date of item order can be found in column A of the "Data" worksheet. Date of invoice can be found in column E of the "Data" worksheet.
Now, the problem that I think I am going into is the way Excel handles dates and times. All columns and data highlighted in orange on the data sheet need to be maintained without being changed, as eventually I am going to have a report setup by our operating program drop in there so that it automates the information without any additional labor by our employees who have varying levels of Excel proficiency. Unfortunately, the report from our operating program cannot simply list a date without a time. Feel free to create any column or field to the right of the orange columns in order to complete formulas based on those orange columns. I will just lock those cells when finished so that coworkers don't accidentally blow the shizel up.
The second sum formula that I need is highlighted in yellow on the "Summary" worksheet. Basically, I need a formula that sums all commissions in column H of the "Data" worksheet for those items that are cancelled AFTER invoicing. Column D of the "Data" worksheet lists the cancellation date. There are explanations for each of these on the worksheets for quick referral.
View 2 Replies
View Related
Apr 6, 2013
Basically I am trying to create a worksheet in which everytime I input information into Sheet 1, it is copied into Sheet 2. I want to have each entry in succession on Sheet 2 such that my first entry would be on Row 2, second on Row 3, third on Row 4, etc. However, everytime I put something new in Sheet 1, it just overrides the information in Sheet 2.
Basically I type in ticket sales in sheet 1, it calculates the prices and keeps a transaction log in sheet 2. But everytime I do a new ticket sale, it just overwrites the previous transaction witht he new transaction information. I've pasted my VBA below:
Sheet 1 VBA:
Code:
Option Explicit
'Form level variables - used in more than one event
Dim intAdult As Integer
Dim intStudentSenior As Integer
Dim intBalcony As Integer
Dim intChild As Integer
Dim sngAmountDue As Single
[Code] .......
Sheet 2 code:
Private Sub cmdSummary_Click()
'Declare Variables
Dim intCount As Integer
Dim i As Integer
Dim intAdult As Integer
Dim intStudentSenior As Integer
[Code] ......
View 3 Replies
View Related
Jan 27, 2014
Imagine I have 2 columns of information that look like this:
Column A
Column B
AS
Dog
AS
Cat
AS
Hamster
FT
Fish
These are my key columns. The letters are initials of people and the animals are the pets they're responsible for.
Now, I have 3 more columns that look like this:
Column D
Column E
Column F
These columns can go on for hundreds of rows.
What I want to do is pull out the information from columns D, E and F where the initials and pet match those in the key list, then paste that elsewhere (say to columns J, K and L).
So, for instance, the first entry would be copied across because, according to the key list, AS is responsible for a Dog, but the bottom entry for AS wouldn't because he was looking after a fish, and that pet isn't listed as one of his animals in the key list (Fish is listed alongside FT). Likewise, the entry for AH wouldn't come across because AH doesn't appear on the key list at all.
View 1 Replies
View Related
Jun 28, 2013
So my problem is that i have a table that is imported from sql and everyday i manually type in comments in a column that i made in excel next to the table that is imported. evreytime i refresh the data and get new data the comments are gone, how do i keep the comments with the row that i type it in?
View 2 Replies
View Related
Jun 3, 2009
I am importing data from a csv file into another program. For some reason this particular cell is causing everything past it in the same row to be thrown off. It is moving bits and pieces to the next column, then the next, etc....all in the same row though.
Can you see anything in this data that would cause issues in a csv file when importing. The data in this cell is html code for an ecommerce item description.
View 3 Replies
View Related
Jul 6, 2014
i have a script to import a workbook which works fine, but when the data is imported i would like to have all the data in the cells aligned to the left of the cells, as im new to vba i can work this out.
Below is the script i'm using to import.
I would like this to aligned all cells to the left and centered when imported.
Sub tst()
With workbooks.open("C:example.xls")
with .sheets(1).usedrange
thisworkbook.sheets(1).cells(rows.count,1).end(xlup).offset(1).resize(.rows.count,columns.count)=.value
end with
.close False
End with
End Sub
View 3 Replies
View Related
Feb 12, 2008
I am trying to import from Excel Worksheet 1 into Excel Worksheet 2 in a user-friendly manner. I've created a form in Excel Worksheet 2 that allows the user to browse for a file and select it.
All I want to do is copy columns A through I from Worksheet 1 into Worksheet 2. How can I do this very smoothly without needing to open up Worksheet 1?
View 9 Replies
View Related
Aug 8, 2006
How can I limit the number of lines when importing a file? Limit the import
to the first 53 lines of a file that has 50,000+ lines.
Want to import the first "XX" set of lines, then I want to skip a set of
lines, then continue to import the rest of the lines. The second import needs
to be inserted 2 or 3 lines down from the first import.
There is the function:
Workbooks.OpenText Filename:=
But it only has a StartRow and can not specify the "EndRow". Also can not
specify where to start in the worksheet, i.e. Cell A5
View 10 Replies
View Related