I was wondering if it is at all possible to insert one worksheet into another one? Specifically, I have a report that I have created, but someone requested a section at the top that would require completely different sized columns than the rest of the report uses. Is it possible to embed another sheet into this report so I can resize the columns without it affecting the rest of my report?
View 6 Replies
when I insert a row into the sheet called WBS - Explanation, it only copies over into columns A:D in my worksheet called Timeline & Key Tasks. Unfortunately, I need the whole row to be inserted in the Timline & Key Tasks worksheet.
I can see how the coding has been set up and why this is happening, unfortunately I don't have the knowledge to workout how to change it to the code to include the whole row without deleting information, which I don't want to do.
I have written a vba program that creates a report in excel. Most of the pages of the report are created at runtime. I have an image on a hidden worksheet that I need to place into one of the worksheets that is created at runtime. The image is an excel chart that I copied and pasted as a picture. I did this so that I could resize it easily and all of the elements of the chart would maintain their relative sizes. I have tried:
View 2 Replies View RelatedI use the following code to insert a row of set parameters in one of my worksheets.
View 10 Replies View RelatedWorksheet full at Column IV how can I insert more
View 1 Replies View RelatedTrying to find a code which will insert all images into specified cells.
[url]
All of the images are in a single folder C:/My Documents/Pictures
All are .jpg images which contain the prefix EV_
ie: image1 is called EV_10020003.jpg
image2 is called EV_40B00001.jpg
image3 is called EV_C003001.jpg
etc.
Throughout my worksheet I have cells containing text of an image
ie: in F23 contains the text EV_40B00001
in G50 the text EV_C003001
etc...
My aim would be to use a command button to search through my worksheet (Sheet1) and load up each image to their corresponding cell.
I have a approximately 17 workbooks, all with multiple worksheets within. I have a logo that I now want to add to each worksheet in every book.
What I would like to do is the following, on each worksheet.
Add 13 rows starting from the top A1 (this is to make room for a logo I want to add)Add the logo JPG file (which covers the range A1:F13) . This will be the same picture for all sheets. The picture properties should be "Locked" and "Don't move or size with cells". The path of where my logo is stored is C:UsersGrantDropboxEffExAdminLogosEffEx_logo-05Then select the entire contents of the workbook and uncheck "Locked" from the format control.Then apply protection (which leaves the picture locked) but allowing selection, inserting and formatting of rows/columns.
This will allow the users to still format columns and rows eg. autofit columns, but they cannot select and delete the logo.
I have tried using the Macro Recorder but when I select all sheets, I see that it records the actual sheet names and so this will obviously not work for when applying to other workbooks. Also, it did not record any of the Protection commands which I did.
how I can do this?
Can I get a macro to insert a new worksheet each time it runs and rename it to a value held in a cell on another tab eg Sheet1, cell A1 - this value will change each time the macro runs so there wont be any duplicated tab names ?
I have got a worksheet called data with values in column M7 to M31 which are only there if they meet a criteria >0
if there is a value in cell M9 only, i would like to select the value of M9 and also the description in B9 and insert this into another worksheet called W1 on row C43 and i43 and repeat on C44 and i44 if values are >0 in M11, this would create 2 rows and would expand if there was more matches >0
I have a workbook with a worksheet called Summary that has formulas that refer to other worksheets (say A, B, and C) in the same workbook.
What I want to do (with VBA because I have to do this many times) is copy this Summary worksheet into several other workbooks, all of which also have their corresponding worksheets A, B, and C.
I do *not* want the copied Summary worksheet's formulas to refer to the old workbook. If I copy the worksheet by hand, this is what happens.
Instead I want the copied worksheet's formulas to reference the worksheets of the workbook they are now in.
Count all the true statements in column A (Work) of sheet1 (Checklist), once counted insert that many rows on sheet2 in a specific location, I found a count formula just don't know how to do the insert rows part
Code:
Sub CountRows()
Dim Rng As Range, CountTrue As Long
Set Rng = Sheets("Checklist").Range("Work")
CountTrue = Application.WorksheetFunction.CountIf(Rng, "True")
End Sub
I have created a table where the first 6 columns are data entry and the next 6 columns are formulas to give desired results.
I have made all the data entry cells unlocked and the rest of the spreadsheet locked (cells with formulas etc.)
I would like to be able to insert rows to the protect sheet which I have managed to achieve but when I insert the row the formulas do not update in the row.
Sheet1 has 500+ rows and 30+ columns of data, sorted by text in column G (last name). I want to create a data input sheet for users to manually key in data. I need help to create a macro to cut and insert the row from the data input sheet into Sheet1 - the first row after it finds a match in column G. The text in G can only be one of ten different "last names".
It needs to be after the first event because of graphing from the data sheet.
How do I insert an existing worksheet (previously exported from the same workbook)? I need to be able to do it programmatically.
My workbook contains 10 worksheets. Some users will use all 10 worksheets; some will use only 5 worksheets. If a user is not using a worksheet, I would like to hide it but leave it in the workbook.
However, I want to keep all workbooks in sync even though a user may choose to not use a particular worksheet. When my macros encounter a hidden worksheet, they stall. Does coding exist that allows a Macro to run on a hidden worksheet without making the worksheet visible?
Need to look at a number in a cell, inserts that many rows below that row, then repeats this for following rows that also have cells that indicate how many rows to insert.
Attached is a simple sample data sheet with how data looks before and how it should look after.
i have a workbook with over 100 odd worksheets of different names... i want to insert 1+ columns in every worksheet . For Example ...
in worksheet 1 name abc .. insert 1 column in column B (put clumn b data in column C)
in worksheet 2 name def .. insert 2 column in column B (put clumn b data in column d)
in worksheet 3 name ghi .. insert 3column in column B (put clumn b data in column e)
I have a macro that runs in Sheet 1 and enters the word "Complete" in cell P of the active row. The same cell that requires the word "Complete" in Sheet 2 is in cell T of the active row. Is there a way to have the same shortcut that will identify which worksheet it is in and go to the appropriate cell?
Code:
Range("P" & ActiveCell.Row).Select
ActiveCell.FormulaR1C1 = "Completed"
ActiveCell.Offset(0, 1).Range("A1").Select
how i insert text box on excel sheet.
In which i take values from user and then manipulate those values on click event of button.
The 'Add new material' button at the SMX sheet paste a range of formatted cells and formulas. The user is suppose to type in the description into the yellow filled cells. The problem is once the user enter sthe description in the yellow filled cells, i need the data to be copied into the FastCheck Sheet. Before that, a new row must be generated to copy for the data to be pasted.
View 2 Replies View RelatedStill struggling with the calculator. Is there anyway to get a macro to insert a set number of worksheets. The set number would be the sum of two fields on Sheet 1.
Example attached. I have searched the forum and can now use a macro to insert a worksheet but have no idea how to tailor it.
I am trying to write/ find a macro that will open a new worksheet when Y is entered into a specific blank cell;
View 7 Replies View RelatedI have searched and there are some examples that are similar to what I'm looking for but I cannot seem to use those answers to make my problem work. The example from the forums that seems to match my problem the closest is [URL]....
Summary: I have an Excel file called "COST TEMPLATE.XLSX" that has product information (serial number, quantities, pricing), calculations and reports; then on a monthly basis I receive a file (VENDOR_EXPORT.CSV) with updated product quantities to be merged into the cost spreadsheet.
I would like to merge specific data fields from the VENDOR_EXPORT.CSV file into my cost template based on the serial number. I am attaching three dummy files that hopefully describes the issue:
1. COST TEMPLATE.XLSX
2. VENDOR_EXPORT.XLSX - which highlights the cells to be import and to which corresponding column
3. VENDOR_EXPORT.CSV - raw CSV file
My preference is to do this with functions, not macros. How to add the export into the existing workbook as a temporary worksheet, or just pull from the other workbook as CSV file.
Pls help me do a macro that upon clicking a button it will copy and paste a column heading (located in Row1 of Sheet1) to all non-empty worksheets (Sheet 2 to Sheet N) in the workbook simultaneously. Note that each worksheet has no column heading and has the same number of columns as that of the column header in Sheet1. Worksheet 2 to Worksheet N contains data extracted daily.
View 7 Replies View RelatedWriting a macro to insert two columns with IF formulas into a Worksheet. The 2 columns to be added would be after Column G on Sheet 1.
The new Column H would be
"=IF(G1>=Q#,G#/Q#,0)"
And the new Column I would be
"=IF(G#>=Q#,MOD(G#,Q#),G#)",
Where # represents the row number.
How do I insert an animated gif into a worksheet in excel 2007?
View 8 Replies View RelatedI have a folder for each month, and in the folder there are worksheets for each day of the month. eg for January folder, it will contain 31 worksheets. They all have the same column headings. I want to know if there is any way i can use a macro to automatically insert a formula in each worksheet, using loop?
View 2 Replies View RelatedI need to add a line on the top of a new worksheet with the data copied from another worksheets cells. Using a macro. The line has to be created everytime on the top of the new excel sheet with the previous data moving one down.
View 6 Replies View RelatedI have a protected worksheet, which I have 2 macros, 1 to spell check and 1 to insert rows, they both unprotect the sheet and re protect it again once they have completed. The problem I am having is that when I protect the work sheet first time round I tick the box to allow users to insert rows, once the Macros run they disable this functionality. Is there anyway I can include this in my Macros or do I need to add a new button!
View 9 Replies View RelatedIs that possibe to use the "templeate" sheet and lookup the "Master" sheet to create a new worksheet called "result"
View 2 Replies View Related
