Insert New Worksheet And Rename

Jun 24, 2009

Can I get a macro to insert a new worksheet each time it runs and rename it to a value held in a cell on another tab eg Sheet1, cell A1 - this value will change each time the macro runs so there wont be any duplicated tab names ?

ADVERTISEMENT

VBA - Insert And Rename Columns Not Working Properly

Feb 21, 2013

The code below is supposed to insert a column and rename it. However, when I debug, the code only renames the column, it does split or run the loop. I press debug again, and then code executes as it is intended.

I can't explain why I have to press debug twice for in order for the code to work properly.

Code:
Sub renameColumns()
With Sheets("byPosition")

Columns("E:E").Select
Selection.Insert Shift:=xlToRight
.Range("E1").Value = "Exemption"
.Cells.EntireColumn.AutoFit

[Code] .......

View 2 Replies View Related

Rename Worksheet Name By VBA

Aug 29, 2013

I have came up with the following code , i want all the sheets renamed but except for sheet("PRODUCT")

i tried with if not and somehow it did not work.

Code:

Sub ChangeWorkSheetName()
Dim WS As Worksheet
i = 1
On Error Resume Next
For Each WS In Worksheets
WS.Name = "CUSTOMER" & i
i = i + 1
Next
End Sub

View 4 Replies View Related

Rename Tht Worksheet

May 13, 2007

I renamed a sheet and for some odd reason excel added .xls] before the name of the sheet. So the name was now .xls]Sheet 1. I tried to rename the sheet again to get rig of the .xls], but the program didn't allow it and said that I "entered an invalid name". Now when I'm trying to make links to cells on this sheet, excel says that my "formula contains ans ivalid external reference to a worksheet". The worksheet is now unusable and copying the sheet and updating all the links on other worksheets is a lot of work.

View 6 Replies View Related

Rename Worksheet Cell Value In Another Worksheet

Aug 29, 2011

I have renamed worksheets according to a cell value in the same worksheet, but now I need to rename the worksheet according to a cell value in another worksheet.

Here is the code I tried:

Code:

Private Sub Worksheet_SheetChange(ByVal Sh As Object, ByVal Target As Range)
If Sheets("Set-Up Page").Range("B2").Value "" Then
'rename the worksheet to the contents of cell B2
Sh.Name = Sheets("Set-up Page").Range("B2").Value
End If

End Sub

I have pasted that code into the worksheet that needs to be renamed, but it doesn't work. I have also tried:

Code:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
If Target.Address = Sheets("Set-up Page").Range("B2") Then Sh.Name = Target
End Sub

I like the first one because it checks for a blank value. There will be blank values depending on how many worksheets each teacher needs, so it will just rename the ones that have values filled in. Each worksheet will have the code referencing to a different cell on the Set-Up Page worksheet.

View 9 Replies View Related

Duplicate And Rename Worksheet

Dec 11, 2008

I have what should be a simple question. I have a button in a form that needs to duplicate a sheet and rename it. It will duplicate but i am having problems with the renaming. The name of the sheet is coming from a userform text box. Here is the code i am trying.

View 2 Replies View Related

Rename Worksheet With Cell Value

Jun 26, 2012

I need to rename the sheet5 with the value in E3 of Sheet2.

View 1 Replies View Related

Rename Worksheet By Code Name

Dec 5, 2012

I have a worksheet named "TEMPLATE", it's codename is Sheet10.

I want to rename "TEMPLATE" using the codename for the worksheet.

How would I go about doing that?

View 4 Replies View Related

Possible To Have A Macro Rename A Worksheet?

Aug 2, 2008

Is it possible to have a macro re-name a worksheet. The context I want to use it would almost as a conditional formula.

Example: IF A1 = "time sheet" then sheet1 is then re-named to "time sheet"

View 9 Replies View Related

Rename Active Worksheet

Aug 25, 2006

I'm looking for a macro to automatically rename the active worksheet to Sheet1.

View 3 Replies View Related

Rename Worksheet Code

Dec 13, 2006

I currently download a report and it has a different worksheet name everytime. Is there any way using a macro to change the worksheet name? (My macro extracts data from worksheet a and copies into worksheet b) Hope I've provided enough info.

View 7 Replies View Related

Copy And Rename Worksheet

Feb 16, 2008

Z = Sheets.Count
I = Range("a65536").End(xlUp).Row
Range("a" & I + 1) = I
Worksheets("MASTER").Copy After:=Sheets(Z)
Worksheets("MASTER (2)").Name = I

the probelm is it asks the user to accept or enter there own name for the copied sheet. how can i do this without it asking the user

View 9 Replies View Related

Copy Worksheet And Rename It Using A Userfom

Feb 9, 2009

When I press "commandbutton1", I need "userform1" to view and insert a name in the text box. When I press OK in "userform1" I need a macro to copy worksheet "s0" into a new worksheet and rename this worksheet with the name typeed in "userform1". Also I need to view the name of all worksheet copied using "userform1" in column H in worksheet final.

View 4 Replies View Related

How To Create A Macro To Add New Worksheet And Rename It

Aug 25, 2009

I tried recording a macro to add to a new worksheet, but it gives error while running.

Issue as I understand is, by default excel gives a new worksheet a name (Say Sheet 4), and when u run macro worksheet, new created name may be different.

View 7 Replies View Related

How To Create Macro To Add New Worksheet And Rename It

Oct 3, 2012

I need to have many users press a button within the excel sheet that duplicates the form from the current page, opening a new tab (copying the form) that also prompts to input a specific name e.g. "Enter date and day or night shift" to name the tab itself.

I have just worked out how to put a Command Button in and used the above code to create the new page assigning the code to it.

I need the "my sheet" to be prompted and customisable.

View 3 Replies View Related

Rename Worksheet With Opening The File

Dec 12, 2008

I have the following code, which I use to open up a .xls file generated from Crystal Reports:

Application.ScreenUpdating = False
Application.DisplayAlerts = False

Dim fexport1 As String ' variables for the exported file
Dim fexport2 As String
Dim wb1 As String 'variables to change between the opened workbooks
Dim wb2 As String
strTemp = "Please Choose The Exported File"
MsgBox strTemp
fexport1 = Application.GetOpenFilename("Excel Files (*.xls), *.xls)")
If InStr(fexport1, "False") = 0 Then
Workbooks.Open fexport1
wb1 = ActiveWorkbook.Name

Else
strTemp = "Operation Canceled"
End If

The problem is that Crystal Reports generates the file with an invalid worksheet name (it contains a backslash) and I do not have access to modify the Crystal Report. Althought the file can be automatically repaired by Excel when manually opened, the macro chokes and the "Application.DisplayAlerts = False" does not fix it. The only solution I can think of is renaming the worksheet without opening the file.

View 9 Replies View Related

Keyboard Shortcut To Rename Worksheet

May 4, 2009

Is there a keyboard shortcut to select the name of the active worksheet? At the moment I have to double click on the [Sheet1] and then retype.

If there isn't, is there a macro which can select the name of the active worksheet?

View 9 Replies View Related

Create Copy Of Worksheet & Rename

Dec 21, 2006

I have the following code in my vb app. It creates the new worksheet, gives it the corect name, copies all of the existing data from an existing worksheet and pastes it in the new worksheet, but I can not get it to refresh the formulas. When I look at the formulas in the new sheet they reference back to the MasterSheet worksheet(which is my template I copy and paste from when making a new worksheet)

objExcel.Sheets("MasterSheet").Select
objExcel.Sheets.Add
objExcel.Sheets("Sheet1").Select
objExcel.Sheets("Sheet1").Name = MySheetName
objExcel.Sheets("MasterSheet").Select
objExcel.Cells.Select
objExcel.Selection.Copy
objExcel.Sheets(MySheetName).Select
objExcel.Cells.Select
objExcel.Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
objExcel.Sheets(MySheetName).Select
objExcel.Range("B1").Value = Me.DTPicker10.Value
objExcel.Sheets("AccessDataMonday").Select
objExcel.Range("B1").Value = Me.DTPicker10.Value
objExcel.Application.Run "LoadDataFromAccessUsingDates"
objExcel.Visible = True

View 3 Replies View Related

How To Rename Worksheet Tabs Using Formula And Formatting

Jan 27, 2014

I have a workbook with 30+ worksheets

named 23 Wed, 24 Thur, 25 Fri, etc etc

meaning April 23, 2014 Wednesday, April 24, 2014 Thursday, etc etc

The next project may start on May 19, 2014 Monday - so I have to rename each worksheet beginning with 19 Mon, etc etc

Renaming each worksheet manually takes a long time and is prone to error

I would like to just rename the first worksheet to start date of May 19, 2014 and have the rest renamed automatically.

View 4 Replies View Related

Copy Worksheet That Is Hidden And Rename It Using A Userfom

Feb 16, 2009

I asked for a macro that copy an worksheet and rename it using a userfom!
I received the xls file attached to this mail !
In this xls when I click "Click me to copy s0 sheet and rename it" from final sheet, a userform appear, I type a name there and when I press ok I will have a copy of worksheet "s0" with the name typed in the userform.
If I click on "Click me to copy s0 sheet and rename it" I can create as many copies as I need.

But if I hide worksheet "s0" (using Format /Sheet/Hide) the macro will not work.
I modified the code from module 1 adding the red

View 6 Replies View Related

Rename Active Worksheet From Personal.xls Macro

Mar 12, 2009

I am having trouble renaming an active sheet from a Macro I stored in the personal.xls file. I want the active sheet to be renamed to "Data_Source" and then the rest of the code can kick in. Instead of renaming the current worksheet it creates a new one.

View 4 Replies View Related

Macro That Will Rename A Worksheet Based On The Value Of The Cell?

Jul 28, 2008

Is it possible to write a macro that will rename a worksheet based on the value of the cell?

For instance, if cell a1 has the value Test, the worksheet should be named Test. If I change the value of the cell to say Test 1, the worksheet should automatically rename itself to Test 1.

View 9 Replies View Related

Worksheet Copy And Rename Not Working As Intended

Oct 11, 2009

I've got a Workbook that contains the following worksheets:

1. conversion(2) - Hidden
2. Old Data - Hidden
3. Blank Form

I want to copy "Blank Form" once for each day of the month.
I'd like to rename each copied worksheet with the Date (i.e. Oct 01 2009)

Here's what I'm working with:

Sub Copysheets ()

Worksheets("Blank Form").select

Dim x As Integer

For x = 1 to 30

Worksheets(1).Copy after: =Worksheets(x)
Worksheets(x+1).Name=Format(DateSerial(2009, 20, x), "MMM-DD-YYYY")

Next x

End Sub

The problem I'm having is that the first sheet to be copied is the "Old Data" worksheet and the copy is renamed Oct-01-2009. After that the correct Worksheet is copied and renamed Oct-02-2009 and so on.

I can't figure out why it's copying the "Old Data" worksheet first.

View 9 Replies View Related

Rename Files Based On List In Worksheet

Nov 10, 2006

I regularly receive many files that require renaming. Column A contains the current name and column B contains the desired name. Could anyone tell me how to use these lists to rename the files?

View 4 Replies View Related

Rename Lone Worksheet In Multiple Workbooks

Jun 19, 2008

I have about 200 excel workbooks in one folder, each with a different workbook name, and each workbook has one sheet, but that sheet has a different name in each workbook. I want to make the sheet name the same (sheet 1) in all the workbooks.

View 3 Replies View Related

Macro To Rename A Worksheet To Numbers As Of [+today's Date]

Feb 17, 2009

I'd like a macro to rename a worksheet from its current name of "FullScreen (2)" to say Numbers, plus today's date (without the plus) For example... Numbers as of 02-17-09

View 2 Replies View Related

Excel 2010 :: Rename New Worksheet With Data That Is In Cell

Nov 5, 2013

I have a workbook that filters the data on the worksheet "Reports" this then adds new worksheets and copies and pastes the relevant data that has been sorted, this is done by the name in column "B".

What I need is to rename the new worksheets with the data that is in cell "B2" of the new sheets.

Using excel 2010.

View 4 Replies View Related

Copy Worksheet, Rename As Cell Value & Sort All Sheets

Oct 1, 2009

I am working with a workbook that has data automatically entered each time a new child is enrolled to the program. The child's data is automatically entered to the sheet named "Intake". What I need to do now is rename that sheet using the child's name as the sheet name, but also keep the sheet named "Intake" for the next entry. I would then like to sort the sheets alphabetically but leaving the "Intake" sheet either as the first sheet or the last sheet. I have attached an example of the workbook I am working with.

View 6 Replies View Related

Split Up Rows In Worksheet Based On Value In Column And Rename New Sheet To Same Value

Jul 9, 2012

I'd like to split up the rows in a worksheet based on the values in one of the columns. Also, I'd like the sheets to be named after the values in the column. I have attached example excel sheets to explain this better. I think the vlookup and Sheets.Add and ActiveSheet.Name formulas can be used but I'm not quite sure how to put them together. The actual data has about 20 columns and about 500 rows.

View 6 Replies View Related

Automated Worksheet Copy, Rename Based On Cell Results

Jul 29, 2009

I am building a workbook. The data we are tracking is all in one xml file, which i have mapped to 3 different worksheets(customers, invoices, inventory). On the customers and inventory sheet I have an interface for creating a new customer/product/invoice. I used the macro recorder to make the macro's to do these three things, but could use help on a couple of other functions as I don't actually know VBA. I need to be able to automate editing of existing records by having a button to press on the each sheet that will open an input box that asks the user which invoice number, customer number or product number he would like to edit, then copy that record to the interface for editing, then another macro to replace the existing data with the newly edited data. It would also be wonderful if when creating or editing an invoice it could create a copy of the interface worksheet and rename it as the invoice number. The first row of each datasheet is blank, and each of the interfaces have formula's for importing the information copied to row 1 from the data tables. the second row of each datasheet contains formulas for importing data from the interface. Any help would be terrific...I know you guys are excel gods and I will forever be in your debt if you can help me out....thanks in advance, I'll be studying my butt off until I figure this out

View 11 Replies View Related

Macro To Create And Rename Multiple Worksheet And Then Placing Relevant Data

Feb 24, 2014

I want to find a way to create multiple worksheets and matching data to be placed on appropriate sheets.

Here are more details (Please check the attached sheet screenshot as well):

Excel_Macro_Requirement.jpg

In a workbook, there is a "Master-Sheet". This master sheet contains 8 columns.

I want to create as many new worksheets after master sheet as the values are there in column B (Column 2 i.e. Ad Group). In above attached screenshot, there are 8 values (B2:B9 or A-H). So, I would like to create 8 new worksheets after the master sheet. Also, I want to rename them based on their value from Ad Group column.

Each newly created worksheet should have same columns as the master sheet . Same 8 columns with their name intact.

Finally, I want all matching data of the Ad Group values to be placed on their respective newly created worksheet. For example, worksheet A should have A2:H2 data. Worksheet B should have A3:H3 data, and so on.

Please note that same ad group may have more than one row data. But I don't want to create multiple worksheet of same name ad group. The worksheet should be just one, but all matching data should be placed in that one sheet.

I know it is a bit complex task, but I am sure there would be a way to perform this automatically - probably a macro.

View 1 Replies View Related

Excel 2007 :: Email Current Worksheet And Rename It From Reference To A Cell

Oct 25, 2012

I have the need to email the current worksheet in Excel 2007, which I have been able to do with the following ...

Sub SendTab()
'Declare and initialize your variables, and turn off screen updating.
Dim wks As Worksheet
Application.ScreenUpdating = False
Set wks = ActiveSheet

[Code] .......

Is there a way I can also get it to also rename the sheet from the default "Book1" to the information in a referenced cell.

View 7 Replies View Related

Insert A Row In A Worksheet - Sheet 1 Is Copied Into A Second Worksheet?

May 29, 2014

when I insert a row into the sheet called WBS - Explanation, it only copies over into columns A:D in my worksheet called Timeline & Key Tasks. Unfortunately, I need the whole row to be inserted in the Timline & Key Tasks worksheet.

I can see how the coding has been set up and why this is happening, unfortunately I don't have the knowledge to workout how to change it to the code to include the whole row without deleting information, which I don't want to do.

View 7 Replies View Related

Insert A Picture That Is On Worksheet Into Another Worksheet

Jan 19, 2010

I have written a vba program that creates a report in excel. Most of the pages of the report are created at runtime. I have an image on a hidden worksheet that I need to place into one of the worksheets that is created at runtime. The image is an excel chart that I copied and pasted as a picture. I did this so that I could resize it easily and all of the elements of the chart would maintain their relative sizes. I have tried:

View 2 Replies View Related

Insert Row In 2nd Worksheet

Oct 21, 2009

I use the following code to insert a row of set parameters in one of my worksheets.

View 10 Replies View Related

Insert One Worksheet Into Another

Mar 1, 2007

I was wondering if it is at all possible to insert one worksheet into another one? Specifically, I have a report that I have created, but someone requested a section at the top that would require completely different sized columns than the rest of the report uses. Is it possible to embed another sheet into this report so I can resize the columns without it affecting the rest of my report?

View 6 Replies View Related

Insert More Columns Into Worksheet

Aug 28, 2013

Worksheet full at Column IV how can I insert more

View 1 Replies View Related

Insert Images Throughout Worksheet.

Mar 10, 2008

Trying to find a code which will insert all images into specified cells.

[url]

All of the images are in a single folder C:/My Documents/Pictures

All are .jpg images which contain the prefix EV_

ie: image1 is called EV_10020003.jpg
image2 is called EV_40B00001.jpg
image3 is called EV_C003001.jpg

etc.

Throughout my worksheet I have cells containing text of an image
ie: in F23 contains the text EV_40B00001
in G50 the text EV_C003001

etc...

My aim would be to use a command button to search through my worksheet (Sheet1) and load up each image to their corresponding cell.

View 10 Replies View Related

VB To Insert Picture On Worksheet

Sep 4, 2012

I have a approximately 17 workbooks, all with multiple worksheets within. I have a logo that I now want to add to each worksheet in every book.

What I would like to do is the following, on each worksheet.

Add 13 rows starting from the top A1 (this is to make room for a logo I want to add)Add the logo JPG file (which covers the range A1:F13) . This will be the same picture for all sheets. The picture properties should be "Locked" and "Don't move or size with cells". The path of where my logo is stored is C:UsersGrantDropboxEffExAdminLogosEffEx_logo-05Then select the entire contents of the workbook and uncheck "Locked" from the format control.Then apply protection (which leaves the picture locked) but allowing selection, inserting and formatting of rows/columns.

This will allow the users to still format columns and rows eg. autofit columns, but they cannot select and delete the logo.

I have tried using the Macro Recorder but when I select all sheets, I see that it records the actual sheet names and so this will obviously not work for when applying to other workbooks. Also, it did not record any of the Protection commands which I did.

how I can do this?

View 9 Replies View Related

Lookup And Insert Into New Worksheet

Mar 19, 2007

I have got a worksheet called data with values in column M7 to M31 which are only there if they meet a criteria >0

if there is a value in cell M9 only, i would like to select the value of M9 and also the description in B9 and insert this into another worksheet called W1 on row C43 and i43 and repeat on C44 and i44 if values are >0 in M11, this would create 2 rows and would expand if there was more matches >0

View 9 Replies View Related

Insert Worksheet With Formulas

Dec 19, 2007

I have a workbook with a worksheet called Summary that has formulas that refer to other worksheets (say A, B, and C) in the same workbook.

What I want to do (with VBA because I have to do this many times) is copy this Summary worksheet into several other workbooks, all of which also have their corresponding worksheets A, B, and C.

I do *not* want the copied Summary worksheet's formulas to refer to the old workbook. If I copy the worksheet by hand, this is what happens.

Instead I want the copied worksheet's formulas to reference the worksheets of the workbook they are now in.

View 6 Replies View Related

ADVERTISEMENT