I have about 200 excel workbooks in one folder, each with a different workbook name, and each workbook has one sheet, but that sheet has a different name in each workbook. I want to make the sheet name the same (sheet 1) in all the workbooks.
View 3 Replies
I want to find a way to create multiple worksheets and matching data to be placed on appropriate sheets.
Here are more details (Please check the attached sheet screenshot as well):
Excel_Macro_Requirement.jpg
In a workbook, there is a "Master-Sheet". This master sheet contains 8 columns.
I want to create as many new worksheets after master sheet as the values are there in column B (Column 2 i.e. Ad Group). In above attached screenshot, there are 8 values (B2:B9 or A-H). So, I would like to create 8 new worksheets after the master sheet. Also, I want to rename them based on their value from Ad Group column.
Each newly created worksheet should have same columns as the master sheet . Same 8 columns with their name intact.
Finally, I want all matching data of the Ad Group values to be placed on their respective newly created worksheet. For example, worksheet A should have A2:H2 data. Worksheet B should have A3:H3 data, and so on.
Please note that same ad group may have more than one row data. But I don't want to create multiple worksheet of same name ad group. The worksheet should be just one, but all matching data should be placed in that one sheet.
I know it is a bit complex task, but I am sure there would be a way to perform this automatically - probably a macro.
The following code won't let me copy from the first workbook. I get a run time 1004 error stating "That command cannot be used on multiple selections".
I would rather not have to copy this by column for each of the 4 workbooks
[Code].....
I have folder with 427 workbooks in, named TAB001.... TAB427.
These workbooks contain listed tables out of a bespoke apllication. Each workbook only holds one worksheet (which is named TAB001, etc corrsespoonding to the workbook name).
Each worksheet holds in cell A1 the name of the table
I want to rename each workbook to whatever is in cell A1. SO TAB001.xls becomes, say, Property.xls, and so on for all 427 workbooks.
I envisage a new workbook holdinga macro to do this?
I have a set of excel files that I need to combine into one worksheet. The files have the same number of rows but the number of column will vary. The combined worksheet needs to have the data from each workbook appended to the last column.
Example:
FileA.xlsx
A
B
C
D
1
Question 1
1
10
20
2
Question 2
30
40
50
[Code] ........
i have a group of workbooks all housed in the same folder 'ro24_ws' - who's path is -
C:UsersdavezDocumentseq
o24_ws
what i am looking for is some code to copy a worksheet named 'ro24' from each workbook within this folder into a single workbook
I have a worksheet in excel that has financial data for several departments and schools. The data is across 2 columns and 948 rows. I need to break the data down into multiple workbooks so I can use and existing email macro to send them to managers. There is a unique character that separates the data and I was able to use a previously written macro to enter page breaks which is below, but I'm having trouble using the same unique character (or page break) to put the data into separate workbooks.
Dim PBRange As Range, PB As Range
With ActiveSheet
Set PBRange = .Range("A1:A1000")
For Each PB In PBRange
If PB.Value = "***********" Then
.HPageBreaks.Add before:=PB
End If
Next
End With
I looking at attempting to combine 26 spreadsheets all into one with a macro. Basically i have 26 spreadsheets detailing all items placed into different suspesne accounts, these are on going so they can be up to 2000 lines long. All 26 spreadsheets are contained in one folder with a backup of each.
Columns B - F detail the payment being applied.
Columns G - J detail the payment being removed.
I was hoping the would be a way for a macro to look into each one and if there is data in column E (value) and not in column I (vlaue removed) then return the whole line onto a new worksheet. So basically after i have run the macro i would have one worksheet with all outstanding items on instead of having to open each one and copy and pasting.
The lines will always vary on each workbook as to where the outstanding payments is and im using excel 2003.
I have to report on 6 departments each with 6 sub departments weekly. First I need to consolidate 6 ( move/copy worksheet to consolidated workbook using a macro) separate worksheets (all saved in the same folder) per department into single workbook (preferably generated automatically by macro/code). I then need to repeat the above process for another 6 files per sub department. The output files should be pasted as "values" while retaining all other formatting. In essence I need to automate the whole right click on tab, select move or copy worksheet function in excel to take the load out of doing it manually.
View 2 Replies View RelatedI have a folder with an unlimited number of Excel Workbooks. Data within workbooks are in same format - 3 columns of data. I would like to extract the Data in the range (B55:B70) for every workbook, transpose the data and append by rows into one worksheet.
To be clear - I want to take data range B55:B70 from first workbook,transpose and put on first row - take data range from second workbook, transpose and put on second row, repeating for unlimited number of times...
I'm trying to take a single worksheet from a workbook and merge them all into one workbook. In that master workbook I'm looking to have each of the worksheets on different tabs and the tab names as the original workbook name.
So if I have Workbook1, Workbook2, Workbook3, Workbook4 in a folder. I want to open a new spreadsheet, run this macro, select the folder with the Workbooks in, and have it take the range selected from the worksheet 'other' from each of the workbooks and generate a 'master' Spreasheet where each tab would be called Workbook1, Workbook2, Workbook3, Workbook4 and the contents would be from the 'other' tab
I found some of Ron de Bruin's code online which I've tried to customise.
Currently this takes a range from the tab specified, puts it into an array and then pastes it all into different columns on one worksheet. change this so that it creates a new worksheet for each original workbook, and names it after that workbook.
Objective: use VB to copy the first sheet (tab) from every Excel file in a specific folder to a new sheet/tab (for each) in a master spreadsheet. I will then aggregate this data into a summary table.
Following the advice of an old thread (Access: VBA combining multiple excel files to 1 new sheet), one time for each file in the folder. So with three excel files in the folder, I get 3 new tabs in my master spreadsheet but all are copies of the first tab in the master spreadsheet.
I'm wondering if maybe the code, which was in a post from 5 years ago, needs to be "modernized" for Excel 2007. Thanks for any help.
This is the code I'm using:
Sub Combine()
Fpath = "C: emp2" ' change to suit your directory
Fname = Dir(FilePth & "*.xls")
Do While Fname <> ""
Workbooks.Open Fpath & Fname
Sheets(1).Copy After:=Workbooks("Master.xlsm").Sheets(Workbooks("Master.xlsm").Sheets.Count)
Workbooks(Fname).Close SaveChanges:=False
Fname = Dir
Loop
End Sub
I am attempting to write code for a macro that can cycle through about 30 excel workbooks and merge the data. getting the raw data on one sheet is not a problem, but I also need to sort similar data into corresponding columns while merging such that all data from the workbooks with a certain column heading will be in a single column with a single heading on the summary sheet. The problem is that the column headings on the source workbooks are not always standardized, i.e. "F high", "high F". Each sheet has several columns that look like the one below, with a header at the top and a series of numbers. (please ignore the dashes, I just used them to line up the columns in this post, in excel each value is in a different cell)
F Low---F High---V Low
721-----999---804
721-----999---0
721-----999---0
711-----720---786
711-----720---713
My vba skills are very basic, so I have been approaching this problem with a mountain of if..else and InStr commands, which doesn't seem like the best method and isn't working.
I have several workbooks (5) with the same variables (columns- A:Q) but with a changing amount of rows (2:n, not including the headers). Each row corresponds to a date range (usually a week) for a particular person (up to 40 people) plus a few other values.
I would like to have a way of "merging" or "compiling" the 5 "seed" workbooks into 1 "master" worksheet. Where rows 2:n of each of the 5 "seed" workbooks are added to the master without any duplication of the same name-date range combination. Also, the master worksheet should not include the rows which only contain a name and date range but for which all the other variables are zero or missing.
Each "seed" workbook would have a button that sends the data over to the "master" worksheet.
Is this a really difficult project? Feasible for someone with near to zero VBA experience?
I attached 3 files to show you what I mean. The 2 "seed" files are merged into the "master" file. Please note that in the files only 2 names are used, but the "seed" files could contain any combination of 40 some names. Also note that the length of rows which contains data in the "seed" files is variable, although it should not be longer than 16 rows + the header row.
I am looking for macro where it can generate multiple workbooks with a single worksheet data source. I have this worksheet with data which is look like this:
[IMG][/IMG]
This data will be places in 1 workbook for each of line with given file name as page number above those workbooks generated will have same information for each line but at different cell position such as: take this example at line 3
and
Microsoft Excel 2007
Window 7Pro 64bit
This line could be up to 50 lines of data. I try google search but found most about consolidate multiple workbooks to single worksheet. I do have VBA reference that I refer to from [URL] ......
How to put the information from the worksheet into specific position in the workbooks.
I have came up with the following code , i want all the sheets renamed but except for sheet("PRODUCT")
i tried with if not and somehow it did not work.
Code:
Sub ChangeWorkSheetName()
Dim WS As Worksheet
i = 1
On Error Resume Next
For Each WS In Worksheets
WS.Name = "CUSTOMER" & i
i = i + 1
Next
End Sub
I renamed a sheet and for some odd reason excel added .xls] before the name of the sheet. So the name was now .xls]Sheet 1. I tried to rename the sheet again to get rig of the .xls], but the program didn't allow it and said that I "entered an invalid name". Now when I'm trying to make links to cells on this sheet, excel says that my "formula contains ans ivalid external reference to a worksheet". The worksheet is now unusable and copying the sheet and updating all the links on other worksheets is a lot of work.
View 6 Replies View RelatedI have renamed worksheets according to a cell value in the same worksheet, but now I need to rename the worksheet according to a cell value in another worksheet.
Here is the code I tried:
Code:
Private Sub Worksheet_SheetChange(ByVal Sh As Object, ByVal Target As Range)
If Sheets("Set-Up Page").Range("B2").Value "" Then
'rename the worksheet to the contents of cell B2
Sh.Name = Sheets("Set-up Page").Range("B2").Value
End If
End Sub
I have pasted that code into the worksheet that needs to be renamed, but it doesn't work. I have also tried:
Code:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
If Target.Address = Sheets("Set-up Page").Range("B2") Then Sh.Name = Target
End Sub
I like the first one because it checks for a blank value. There will be blank values depending on how many worksheets each teacher needs, so it will just rename the ones that have values filled in. Each worksheet will have the code referencing to a different cell on the Set-Up Page worksheet.
I have what should be a simple question. I have a button in a form that needs to duplicate a sheet and rename it. It will duplicate but i am having problems with the renaming. The name of the sheet is coming from a userform text box. Here is the code i am trying.
View 2 Replies View RelatedI need to rename the sheet5 with the value in E3 of Sheet2.
View 1 Replies View RelatedI have a worksheet named "TEMPLATE", it's codename is Sheet10.
I want to rename "TEMPLATE" using the codename for the worksheet.
How would I go about doing that?
Is it possible to have a macro re-name a worksheet. The context I want to use it would almost as a conditional formula.
Example: IF A1 = "time sheet" then sheet1 is then re-named to "time sheet"
Can I get a macro to insert a new worksheet each time it runs and rename it to a value held in a cell on another tab eg Sheet1, cell A1 - this value will change each time the macro runs so there wont be any duplicated tab names ?
I'm looking for a macro to automatically rename the active worksheet to Sheet1.
View 3 Replies View RelatedI currently download a report and it has a different worksheet name everytime. Is there any way using a macro to change the worksheet name? (My macro extracts data from worksheet a and copies into worksheet b) Hope I've provided enough info.
View 7 Replies View RelatedZ = Sheets.Count
I = Range("a65536").End(xlUp).Row
Range("a" & I + 1) = I
Worksheets("MASTER").Copy After:=Sheets(Z)
Worksheets("MASTER (2)").Name = I
the probelm is it asks the user to accept or enter there own name for the copied sheet. how can i do this without it asking the user
When I press "commandbutton1", I need "userform1" to view and insert a name in the text box. When I press OK in "userform1" I need a macro to copy worksheet "s0" into a new worksheet and rename this worksheet with the name typeed in "userform1". Also I need to view the name of all worksheet copied using "userform1" in column H in worksheet final.
View 4 Replies View RelatedI tried recording a macro to add to a new worksheet, but it gives error while running.
Issue as I understand is, by default excel gives a new worksheet a name (Say Sheet 4), and when u run macro worksheet, new created name may be different.
I need to have many users press a button within the excel sheet that duplicates the form from the current page, opening a new tab (copying the form) that also prompts to input a specific name e.g. "Enter date and day or night shift" to name the tab itself.
I have just worked out how to put a Command Button in and used the above code to create the new page assigning the code to it.
I need the "my sheet" to be prompted and customisable.
I have the following code, which I use to open up a .xls file generated from Crystal Reports:
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Dim fexport1 As String ' variables for the exported file
Dim fexport2 As String
Dim wb1 As String 'variables to change between the opened workbooks
Dim wb2 As String
strTemp = "Please Choose The Exported File"
MsgBox strTemp
fexport1 = Application.GetOpenFilename("Excel Files (*.xls), *.xls)")
If InStr(fexport1, "False") = 0 Then
Workbooks.Open fexport1
wb1 = ActiveWorkbook.Name
Else
strTemp = "Operation Canceled"
End If
The problem is that Crystal Reports generates the file with an invalid worksheet name (it contains a backslash) and I do not have access to modify the Crystal Report. Althought the file can be automatically repaired by Excel when manually opened, the macro chokes and the "Application.DisplayAlerts = False" does not fix it. The only solution I can think of is renaming the worksheet without opening the file.
