I have an excel sheet that I've automated for my shop ... Basically it copies a set of rows from one sheet, asks for which cell you want to start the paste at, then pastes it... Here's what I have so far:
[Code] .....
So I tried to use a variation of strReturn to indicate number of rows wanted but that didn't work ... Basically I'm going to create the "data" to include 50 rows, but have it selectable for the user to say they only want 5, 7 or 29 rows ...
I have a spreadsheet that I use throughout the day and have to send an email to another person when a customer makes a payment. The number of products they pay for will be different each time and I have the code to copy the right cells into an email and the code to insert the right number of rows for how many things the customer is paying for however as I use it multiple times through the day, I need the code to insert the right number of rows, copy it over to the email then automatically delete the rows it has just inserted so it is back to basics so I can use it again.
The code I have for the inserting the rows (from searching through forums) is:
Sub PRows() Dim NextRow As Long Dim NrOfCopies As Long Dim i As Long Const NrOfCopiesDefault = 1 Const NrOfCopiesMaximum = 9
I have managed to write a macro that almost does what I require, but it inserts the copied row at the end and I want it to insert before the row it's just copied. Any ideas how I can modify the code to do this?
I am using the following piece of code to delete unwanted rows from a worksheet:
Sub DeleteDates()
FinalRow = Cells(65536, 3).End(xlUp).Row For i = FinalRow To 1 Step -1 If Cells(i, 3).Value Like "*2007*" Cells(i, 1).EntireRow.Delete End If
Next i
End Sub
What I am working with is a sheet of about 5000 customer appointments going back to the beginning of 2006. A have peiced together a lot of code to format it exactly as I want and to create a pivot table of what is remaining after the rubbish has been deleted.
However I am finding that I need to keep amending and re-running this bit of code, depending on the date range I want to look at. For example the code above will delete all appointments made in 2007.
My question is: is there a way that I could incorporate an input box, whereby excel asks the user for a start date and an end date and deletes any rows outwith that range?
Some important info: All of the dates are in column C, in the format mmm yyyy
I would only need to narrow down to a month - so for example mar 2008 - jun 2008
With that said, I want to put the row number of a user in (I have a few thousand on this spreadsheet, and all the = data be automatically pulled based on the row number I put in cell B1. So I'm hoping to write in cell B1 the following - "143" (without the quotes), and the remaining cells in column B automatically pull that data based on that, so it would look like the following
Row # 143 Name: =C143&" , "&D143&" "&E143
[Code]....
How do I write the functions to keep the columns the same, but change the row number based on the number I input?
I have a spreadsheet which contains data needing to be re-formatted into a suitable format for my database. So far I have been doing this by hand, but want to make it quicker as I have over 2000 lines to sort out. I am trying to write a macro that determines whether there is data in the column next to the active one (D2), and if there is counts how many columns there is data in. Once it has done this it needs to insert the same number of rows as there are columns, then copy the column data and transpose it into the empty rows. My macro seems to work at first, but it exits after around the 4th row, but I can't work out why.
Sub split_For_Database() Dim No_Of_Cells As Integer Dim Start_Cell As Range Dim Cell As Range Dim LastRow As Range Dim i As Integer Dim lRows As Long Set LastRow = Range("C65536").End(xlUp) i = 0 Set Start_Cell = Range("C2") Set Cell = Start_Cell Do While Start_Cell.Address <= LastRow.Address Do While Cell.Offset(0, 1) > 0 i = i + 1 Set Cell = Cell.Offset(0, 1) Loop...................................
Column B contains geographical Areas. Column C contains a list of business departments.
North Env North Env North Ops North Sales North Sales North Sales South Env South Maint South Ops South Sales South Sales South Sales
Etc.
The values and number of these departments will vary. I want to insert lines to sum the totals at the bottom of each geographic area based on the number of different departments. So, for this example, for the North three lines would be inserted. For the South, 4 lines would be inserted.
I am trying to create an input box where the user can only enter a whole number between 1 and 99. i can create the input box but am having trouble specifiying it can only be a whole number between 1 and 99.
I am trying to build a user-friendly Excel database that takes the user's input from various cells and logs that data input by the user in successive rows to the side. Please see the screenshots of my current spreadsheet below:
Compressor Database.jpg
From the screenshot above, I would like for the user to input their data for the Date of Last Inspection, Current Hours, and check the boxes for any services they performed in the orange/pink "Input" box on the left. Currently I have the spreadsheet set up so that the orange/pink "input" areas recognize data put in to the yellow "Data Log" cells to the right. I am trying to get the yellow "Data Log" cell area to store the Date and Hours data put in by the user in successive rows like a database, but I am not sure how to do this. I was thinking of putting a button in the says "Log Data" which would, when clicked, store the data in the "Data Log" cells. I am unsure if I need to use a Macro or whether Excel has a simple, built-in function that can be used. Eventually I have plans for the "Date of Last _______ Change" Gray boxes, but would like to take this one step at a time.
I am not well versed in VBA and Excel Macros, and I am currently using Microsoft Excel 2007 (yes, I know it is old). I do have C# and Matlab coding experience, however I would like to do this in Excel to make it easier for the User as it is a well known program.
I am working on a spreadsheet and would like to create a cell that allows the user to input a number (1 to 5) which will then equate to a percentage(%). I would then like this to deduct that percentage from a total number...
To try and explain this.. Should the user input 1 into the cell, this would then equate to 3% - this would then deduct from a total that percentage. Input 2 = 5% etc..
i have a sheet that manipulates a variable amount of rows containing data input by the user. if a cell has an unexpected entry causing an error the program just halts with the default error message. the user then has to find the error which can take time. is there any way a message box can appear showning what row the error was found on ?
I want to force my user to input a date in a userform. I have a normal Textbox and assumed i'd be able to set the properties to mean that imput had to be an integer and the format had to be "00/00/00" but I can't see how to do this.
Cell A5 has a Yes_No pull-down list for data validation. In cell B5, I want to display the value 0.002 only if A5 is "Yes". If A5 is "No", I want the user to be able to enter a number into the B5 cell without destroying the formula.
I have created a macro that processes through information for the creation of checks.
I would like to have a way for the user to input a check number, and Excel to take that number, drop it into cell A2, then increment it and drop the next number in A3, and so on until all of the checks have been numbered. The process should stop at such a point as there is no more text in column B.
Here is an example. Let's say I have 35 checks to write. The first check number is 200. I would want a user box to pop up which asks me for the first check number. I would enter 200. Then the process would place the number 200 in cell A2 (A1 is part of the header information for the checks.) In cell A3, the number 201 would be placed. The final check number would drop into cell A36. No check numbers would appear in cells A37 and greater because cell B37 is empty, signifying that there is no further check data.
I have a range of cells that I want to sum based on a range inputed by the user. The range begins with cell c27 and ends with cell au27. I want the user to be asked the beginning cell and ending cell of the range they want to sum and then output the answer.
I have one sheet to act as a splash page for user input. The second sheet stores all relevant data. My goal is for the user to input a numerical value in a cell (or input box) and then click a submit button. The code for the macro should look at a cell on sheet 1 which displays the primary key of the row in the table on sheet
2. Based on that primary key, it should look to sheet 2 and then insert the value into the table in the correct row and column. The column headings are the days of the week, and the specific day the user is concerned with is also displayed on sheet 1.
Sheet 1:
A1 = Day of the week A2 = Unique primary key A3 = user input value
Sheet 2: table Rows=primary key (001 - 999) Columns = days of the week (Monday - Friday)
example: user inputs '5' on sheet 1 with 'Tuesday' and '007' selected in their respective cells. I would then like 5 to be copied to B7 (row 7 for 007 and column B for Tuesday).
I am trying to move (archive) data from one sheet to another sheet based on a date range provided by the user’s input. If the date on sheet “list” in the cells in range R9:R10000 fall within that date range the following takes place. The rows that meet the date range per the user’s input in the range of R9:R1000 are copied and just the values are pasted into the next empty row starting with row 7 on the “report” worksheet. The cells that are copied on the “List” worksheet are NOT deleted but the contents are cleared. The reason for this is because there are formulas/links in those cells.
I have attached a worksheet example and have some VBA code but it does not work.
I have declared a 'long' variable. however; how do I change the variable data type to string if user input is not a number? how do I recognize the user input's datatype?
I have a worksheet with 30,000 rows. But sometimes even if I have fewer records in this worksheet(lets say 1000) worksheet shows the same 30,000 rows.And its annoying when you try to navigate using vertical scroll bar. Is there any option to re-adjust the worksheet to make it more user friendly based on number of rows in current sheet.
I'm trying to create a formula similar to this: =sum(B7:B & 8*A2+3). What I want the formula to do is start in B7 and go to B###. The cell number is based on user input. So if the user enters "24" in cell A2, then 8*24 = 192, 192 + 3 = 195, so the formula would be: =sum(B7:B195). Can I do this in a cell, or do I need to run it in a macro?
assuming user has inputed two numbers 1 and 5. I know you might have lots of questions like how the hell user input is coming when there is no usage of VBA.
What I am trying to do is get the ROW 13 and ROW 18 outputs depending on inputs in ROW 2 to 5. Inputs in ROW 2 to 5 can have any value in any year. I would like to perform the calculations if the value in column U is 2 (if 1 then no action required)
I don't need ROW 10, 11, 12 separately if that is easier ...I am interested in getting the ROW 13 basically.
I need to filter data based on criteria based on user input form that is in another workbook. For example, I have a list of departments, I want to create a userform for the user to enter department number and then have excel filter only the data belonging to that department. The person will then update the department records and save the file.
Here is partial code I have been working on but having difficulties:
Dim FilterCriteria Dim CurrentFileName As String 'Get the current file's name CurrentFileName = ActiveWorkbook.Name 'how do I call another workbook?
Excel 2003, I have a list of products with corresponding prices located on a hidden worksheet. I have a spot on another worksheet where users can select a certain product and next to that cell there is a column for price. What I want excel to do is auto-populate the price cell based on what product the user selects. For instance, if the user selects OD2000N, then I want the price to auto-populate with the corresponding price that is found on the hidden sheet. Like I said before, I know this has probably been answered, maybe even mulitple times but I can't seem to find the appropriate thread.
How would I reorder columns & tabs based on a form where the user can put them into order that they would like the columns? I forsee some type of form where the user can dsignate the order and then start a macro that will sort both the columns and tabs.
i have a macro which takes the results generated and puts them into a table and filters the data so that zeros does not show and arranges the table from largest to smallest. Now i have a problem where i need to select the power, fuel oil consumption, weight and area from one table and the other power, fuel oil consumption, weight and area from the other table and combine them together so that i can have all possible combinations of the data, but i don't want the zeros to show in the combinations. i need the combined data to show on a separate sheet. The data of table 1 varies with rows as shown:
The Data of Table 2 varies with rows as shown:
I would like to achieve a result like this in the following columns and rows without having to input them manually:
I'm trying to come up with a histogram chart that adjusts Bin Size based on user input. I've come up with the formulas for Bins and Frequency, but am struggling when it comes to charting the data to dynamically update when the user changes Bin Size. How to make the x-axis dynamically adjust with the number of Bins.
So my issue this time is that I have a bunch of columns that correspond to a month. If the user wants to view data from that month column then they have to link to that cell specifically (the worksheet being used is different than the one in which the month columns are)
My goal was to create a single cell in which the user typed in a month abbreviation such as jan, feb, mar.. so on and so forth. From there they correspond to a vlookup table which tells you which month is in what column (because that part never changes) so jan is in column c and feb is in column d... continuing until december is in column n. So the vlookup corresponds to the table and that works fine, type jan into the cell and the vlookup returns c. So i think this will work.
My problem is that in the cell I am typing this in I want it to be a part of a whole cell reference such as c5 or d7 where the 5 or 7 is a constant (I have that part down) however the reference is to another sheet. So in sheet 2 I want to reference sheet 1 i.e.
Formula: [Code].....
<-- is the desired return.
Right now (in sheet 2) I have
Formula: [Select Code] .....
Which returns the desired d5 but as text and not referencing sheet one. I tried
Formula: [Code]....
But this makes the vlookup malfunction (i think it starts looking in sheet 1 for the month cell but it is not and can not be there.
SO how do i force a vlookup to turn into a cell reference, and how do i make that cell reference come from a different worksheet without causing the vlookup to malfunction.
