What formula would I use to populate a cell?
Example
e13 = 0 until after the 10th of the month on the 11th it = $100.00
If I13 has an amount in it on or before the 10th e13 remains $0.
Each of the 12 line of this rent roll needs to correspond to its own month.
I need a formula to calculate how many months has passed irregardless how many days had passed. What I mean by that is if I have a starting date of 1/31/2010 and an end date of 2/1/28/2010, that should count as 1 month passed. I tried using the DATEDIF function, but that function is counting number of days, so if only 28 days had passed, that would not count as 1 month.
I want to highlight the rows in my worksheet when the dates in column 'N' are in the past. I've seen codes to do this using conditional formatting when searching online and in here but the problem is is that it highlights blank cells as well. Is it possible to correct this?
View 8 Replies View RelatedMy original formula is:
=IF(ISBLANK(VLOOKUP($E39,'Players Scores'!$A$4:$AV$700,'Players Scores'!AA$3+6,FALSE)) = FALSE,VLOOKUP($E39,'Players Scores'!$A$4:$AV$700,'Players Scores'!AA$3+6,$E39),"")
I am using the above formula but would like it to get the value when the date has passed (when date has been inputed in another cell)
I have added an attachment, The formula begins at J44 to AY44 but when date has entered in the red (D44:D67)section I would like to retreive values for blue section(Q44 and onwards) and not the yellow section(J44 to P44)
This is so when players make a transfer it doesnt include the weeks before that date!!
I have a worksheet that has a drop down box with the options PPP, MONTHLY, TOKEN & DEFAULT, next to this i have a date when a payment is expected, what i want to do is automaticaly set this to default after the date has expired, the problem i have is that there is data validatrion in this box so i cant enter a formula, is there a way around this
In my excel sheet, I have date values stored in cells from D7 ti IV7. in cells C8 to C100, I have a data validation which selects the values from cells D7 to IV7. When user selects a particular date in coumns C8 from the list, using my code, I am trying to search for the value stored in cell C8 within the range D7:IV7 using function Application.Match
While running the code by clicking on "Distribute Budgeted Efforts" command button, I am getting an error "Type Mismatch" and error is coming from code line number 27 which is "lInitial = Application.Match(lInitialdate, Range("D7:IV7"), 0) - 1"
My code is as below
Private Sub cmdEffortDistribute_Click()
Dim lCount As Single
Dim lStartDate As Date
Dim lCounter As Single
Dim lBudget As Single
Dim lInitial As String
Dim lInitialdate As String
Dim lInitialWeek As String
I am also attaching excel sheet which I am using here for reference.
I want to make a sheet that will lock cells from rows that have passed the yesterday date. In A column i entred the days and the locked row must have the range from A to U. After i read the post from here Lock / Protect Rows Past Due Date any solution.
View 3 Replies View RelatedHave a macro where is some dates have passed the formulas are cleared but if the date is < than TODAY the value is left. All worked ok until I changed to formula to where the date calulated exclued weekends. Have attached example spreadsheet.
Forgot to add the marco was provided by the hard work of fellow Ozgrid memeber (Ger).
I am trying to lock cells after today's date has passed so that no one can make changes to it after today's date has lapsed. This is for protective reasons so that people do not remove their names from reserving something after using it. Now the code should disallow locking after cell input entry when today's date hasn't passed so that changes can still be made by the user. I am trying to determine the code to do this but I have no idea as to how to do it.
Here's a scenario: I reserve something for Aprill 11, 2009. I input my name. Since it's April 9th, 2009, I am still able to make changes up and until April 11, 2009. After this date, the cell is locked and no changes can be made, except for the administrator.
I am new to Excel programming, haven't done any before and not familiar with creating/editing macros. Using Excel 2007.
I would like to automatically lock all the cells in a row if the date in column A in that row is >= 7 days old. Data is entered once a week (some time Sunday - Saturday) and I would like historical data (rows) to be locked so that they can't be edited inadvertently.
If possible could I also highlight the current working week somehow?
I have attached the worksheet : testworksheet.xlsx
The following code sends the open workbook, as an attachment, to a predefined email address. It then inserts the date it was sent in a cell in another workbook. It works ok in three other modues going to different addresses, it works ok on other networked PCs. Unfortunately on one PC we get the error "Can't Find Project or Library". Initially this pointed to an undeclared variable, when this was declared, it pointed to another. All variables have now been declared but it fails and points to the DATE command".
VB:
Sub To_Design()
''
'=======================================================================================================
'This emails the current open file, which is named after the Log Number, to the Originator of the Doc 34.It opens up
'the Doc 34 Log and enters the date that it was sent in Column L. The email addressee has to be manually added as it
'could have been originated from anywhere in the company.
'=======================================================================================================
[Code] ....
I'm trying to come up with a formula that allows me to insert the date of the previous trading day. Because for several reasons I can't create a column array of manually entered holidays, I'm trying to find a formula that would produce this. I've tried this, but excel doesn't like it.
=DATUM(JAHR(ARBEITSTAG(HEUTE();-1;{DATUM(Jahr(heute());01;01);DATUM(Jahr(HEUTE());12;25))})); MONAT(ARBEITSTAG(HEUTE();-1;{DATUM(Jahr(heute());01;01);DATUM(Jahr(HEUTE());12;25))})); TAG(ARBEITSTAG(HEUTE();-1);{DATUM(Jahr(heute());01;01);DATUM(Jahr(HEUTE());12;25))}))
I created a calendar and made it so when I click on a cell, it pops up and allows me to choose the date. When I choose the date and press okay, it is supposed to put that date in the cell. I created the spreadsheet a while back and remember it working. Now however, it doesn't and I can't figure out how. When I made the calendar, I followed some help posted on here and copied the VBA from their calendar since I don't really know VBA at all. Here is the worksheet. It should have the calendar already created via VBA. I just need to know how to have the popup calendar to place the date selected in E5.
View 4 Replies View RelatedI have a workbook that requires refreshed source data each day. The workbook has all of the macros and formulas that analyze the data. I have the following code to import the worksheet with the raw data (onto a fresh worksheet in the calculation workbook), but I would like to create code that also adds the date and time to the imported data worksheet -- not the date/time the raw data was created; instead, when it was imported into my calculation workbook.
Below is my code for importing the raw data worksheet:
[Code] .....
Private Sub Workbook_Activate()
Dim user As String
If Worksheets("Setup"). Range("D6").Value = "" Then
user$ = InputBox("Hello. Please enter your name to inialize the program", "Enter Name")
Worksheets("Setup").Range("D6").Value = user
MsgBox ("Welcome " & user & ". Press 'OK' to continue on to the Main Menu.")
Else
user$ = Worksheets("Setup").Range("D6").Value
MsgBox ("Welcome back " & user & ". Press 'OK' to continue on to the Main Menu.")
End If
Exit Sub
but i would like to expand the "welcome back" msgbox to also display "the last time you were was was (eg: 2 days/3 hrs/14 min) ago" - which i presume would be calculated from the last save.
I would like to know a way to sum the future months dollars only once the month has passed to consider that amount only in my forecast. For eg. If I have a Vendor A contract from Jan - April for $1000/per month in total for $4000. My Forecast should only be Feb-April = $3000. So my total column should only display $3000. Once Feb has passed , the forecast should only be March-April i.e $2000. How to get rolling month sum of forecast once month has passed.
Attached is a sample spreadsheet with different vendors.
Rolling sum after month has passed.xlsx
[data] ....
Here I have 9 total requirements to be tested in any event. If I wanted to count the number of events passed it wouldn't be 7. See Blah2 it passed Design and Electrical. Separate Events yes, but only one requirement. I need to have a total could of 1 for that as passed. Not two. I'm comfusing myself because this inherited spreadsheet is over 1,000 requirements.
I have a formula which calculates number of days remaining. But I need a formula to to know how many days passed after a particular date.
Example :-
Date .Days passed
10-Feb-2010 .6
=IF(ISBLANK(G14),"",IF(TODAY() > G14,"LIC EXPIRED",G14-TODAY()))
The following afterupdate procedure for my txtStart1 text box sends the value to the FormatTimeValue function that is coded in a module.
Private Sub txtStart1_AfterUpdate()
MsgBox Len(Trim(Me.txtStart1.vaue)) '<= outputs 1
Me.txtStart1.Value = FormatTimeValue(Trim(Me.txtStart1.Value))
End Sub
As you can see from the bolded text, the length of the value is 1 when outputted from the forms code.
However, when I pass it to the following function in a module it outputs 2 as the length.
Function FormatTimeValue(vTarget As Integer) As String
Dim TimeStr As String
If IsNumeric(vTarget) Then
MsgBox Len(vTarget) '<= outputs 2
Select Case Len(vTarget)
Case 1 ' e.g., user entered 1 so time should be 01:00
TimeStr = "0" & vTarget & ":00"
All the subs below take place in Module4. I have a variable, MoreDates, defined as Boolean. At first it was just dimmed, now I have it as Public. When it's passed to a sub, it's true; in the called sub it's changed to false (and I see it as false when stepping through) and sub is exited. The next line of the calling routine checks if true/false...but it's true again. I'm not passing by value, so I don't know why this is happening.
MoreDates=True
Do Until MoreDates = False
Query_BigCharts (MoreDates) '***************
If MoreDates Then
temprow = temprow + 1
Range("A" & temprow).Select
lastdate = DateAdd("m", -1, lastdate) ' backs last-written date up a month
Range("D6").Value = lastdate 'send to eom cell
lastdate = Range("D8").Value ' formula in d8 converts to last weekday of the month.
End If
If lastdate < FromDate Then
MoreDates = False
End If
Loop
End Sub.............
If C2 = 21/06/14
I need F2 to highlight when 60 days have passed from the date entered in C2.
Would this work if placed in F2 =C2+60<TODAY()
No access to excel at the minute to try it
I have a query where I am trying to find out how many people passed in green, amber and red from a series of data. I know (from the attached file) how to find out how many greens, ambers and reds there were, but how can I find out how many of the 7 in cell B12 passed in Green?
View 2 Replies View RelatedI am trying to devise a service schedule that has the installation date in say cell D4 and I would like this to automatically place a date a year from there in to cell E4, then 4 weeks before date comes round i would like the text cell to turn yellow, then on & after the date to turn red. Is this even possible?
View 12 Replies View RelatedI am working on a sheet that has over 150 tabs of information. It is a simple audit that allows for Yes, No or N/A to be selected for each audit category. I have an Outcome Summary tab that is pulling totals for all the audit information on each tab. I did a CountA statement to count any cells (from all worksheets) that had anything selected, so I have my count for the amount of files audited, but for the life of me I cannot come up with a formula that counts the ones that passed or failed the audit. Needs a formula that counts for Yes as 1, No as 0, N/A as 1 (these don't count against us) and doesn't return an error for a tab that wasn't selected.
View 3 Replies View RelatedI would like to create a macro which I can use over and over again, with slight modifications.
I have included a sample worksheet with two (2) sheets. Sheet 1 is considered my 'master sheet' of which I want to add data to, if it exists. Sheet 2 is some additional data that may or may not be included. The common thread, between the two sheets is column A.
I would like to either add to sheet 1 or create a sheet 3 with the data, whatever is more effective.
In this 'sample' case, I would like to move the data on Sheet 2, column 'H' to Sheet 1, provided both column "A's" match. Again, if it makes more sense to combine the two on Sheet 3, no worries. However, the next time I do it the data may be in a different column so I hope to understand how to change the 'From' and 'To' columns. My rudimentary skills want to say If it exists, place it here. If not, move to the next entry.
The end result would be all the data on Sheet 1 (as it stands), joined with the data on Sheet 2 Column H, if Sheet 1 Col A = Sheet 2 Col A.
This would be a process that I would do over and over again as I populate Sheet 1 with the data I need.
i have a spread sheet that has a number of different addresses in them I need a vb code that will insert 5 rows between each row of data starting from row 42 and has the possiblity of running to the end of the rows 65536. i believe the best way to do it is via column B which will always have data in it. i have tried a number of methods but they all only insert the rows once or they do it the required ammount of times one after the other so i end up with a whole section of blank rows and all my data still together.
View 4 Replies View Relatedwhat i want to do is have an area where i can input data and then i have three options of inputing the data or resetting data that is already in the list of data so i start to create a list of data but i can reset/change values if i wish for example quantity. i would also like to have a way to subtract or add a number from the quantity assigned to a code/name of some form. i know that's quite a bit
View 3 Replies View RelatedI am trying to create an automated input of numbers which will only happen if text is present in a cell on the same line:
A
1Collumn 1 Column2
21 MR X
3(cell with formula: If text is present in column 2 insert (CellA2+1). Result is 3 being inserted in A3.
I have tried to combine a ISTEXT function with an IF function but to no avail.
how to display the result i made in macro to active worksheet so that i can keep a record of the result made in my random generator,
Sub timer()
TextBox1 = ""
TextBox2 = ""
TextBox3 = ""
TextBox4 = ""
Dim x As String, i As Byte
Randomize
x = Format$(Int(Rnd * 1899) + 1, "0000")
For i = 1 To Len(x)
Me.Controls("TextBox" & i).Value = Mid$(x, i, 1)
Application.Wait Now + TimeValue("00:00:03")
Next
End Sub
Private Sub CommandButton1_Click()
timer
End Sub
Private Sub TextBox1_Change()
End Sub
I have two worksheets.
1 worksheet I have a value and I need next to it the result i take from other worksheet.
LETTERS
AMOUNT
A
Result
C
Result
G
Result
[Code]...
The list goes on.
So Pretty much I need to compare the value "LETTERS" on the first worksheet with the array of letters from second worksheet and insert in the field of the Result, the value next to the correct find in the array of letters ...