I'm using a CALL Macro to split up a HUGE macro into different pieces:
Code: Sub RSLDASHBOARDV2() 'Macro recorded 12/14/2010 by Ryan R. Koleno, Pharm.D. 'Last Updated 7/10/12 by Ryan R. Koleno, Pharm.D. 'Do Not Modify Code Unless Given Proper Privileges to do so. Dim APPSPD As Worksheet With Application .ScreenUpdating = False .Calculation = xlCalculationManual
The first few macros dealing with page setup and what not work fine but when it hits the Pivot table code for the STATSPIVOT macro it errors out stating: "Run-time error '1004': Unable to get the PivotItems property of PivotField class' at this point in the code:
Code: objField2.PivotItems( _ "TRC").Position = 1 objField.PivotItems( _ "MEDCO MAIL OR AOB").Position = 2
When this macro is not split up it worked fine as written. Am I overlooking something in the Call Macro's code or is there a variable I'm not aware of. I have included the Pivot Table code that errors out as well.
Code: Sub STATSPIVOT() 'STATS PAGE BASED ON STATS DATA TAB Sheets("STATS DATA").Select Dim objTable As PivotTable, objField As PivotField ActiveWorkbook.Sheets("STATS DATA").Select Range("A1").Select
I am trying to call a pre- recorded macro in Axys using VBA code. I've been able to copy a script from my predecessor's macro, but I now need to debug and create new codes. Can anyone explain the structure of the following command?
the "mdld_cbdg" is m for macro, then the name of the report in Axys. Although the script code is the same for most of my macros that succesfully call & export Axys reports, I receive an error with this one when I try to command it. I've already tested the waiting time in VBA to call the report, and I know that's not the problem.
I want a macro that run the application GetOpenFilename (or something that is similar) but when I push the OK button, i don't want to open the file, I just want the filename of the file I have browsed to.
This is the code I use to call a macro when the macro Im calling is in the same workbook.
However, I would like to call this same macro when using another workbook. I copied the macro "Clearformating" and pasted into a personal macro workbook module. However when I add this code to the sheet tab it will not run the macro.
I have a Sheet sheet1 and I want to run a macro when the cell D2 in Sheet1 is equal to 10,7,5,and 3. I only want this macro to run when those values are reached the macro then puts the data onto a sheet called wps. The macro is run as a module and is a sub macro.
I have a work book with 3 sheets. Sheet 1 is the main sheet and sheets 2 and 3 will use (I hope vlookup) to update 3 columns from info in sheet 1. my attempt at a vlookup call in sheet 2 is: =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
my understanding is that: - $b3 is the cell in sheet 2 that will be updated as a result of the vlookup call. - [master_AoJ_2.xls]Sheet1!$B$3;$B$65 refers to range $B$3:$B$65 on sheet1 of master_AoJ_2. it does not work... infact I get nothing at all. when I type the call into cell $b3 of sheet2 excel thinks it is stariaght text. this is how I coded the function call =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
I have UDF and would like to use a Macro Button to have it run whenever I need to. Now I have to disable macros with notification in trust center and after entering data, enable content. I have my UDF in a module, is it possible to have another module with a macro so I can run this UDF whenever I need to?
I am trying to run different macros by clicking various different buttons on the sheet, I then want different data to load into the user form depending which button was pressed. So I have buttons named "SV_1" and another named "SV_2". when either button is pressed then it runs a common macro that gets the name of the calling item. then I want to add "Macro" to the beginning of the calling item name and then call that macro. here is the code that I am working with, when using a watch i can see the value of the variable is "MacroSV_1" when button 1 is pressed but I cannot get it to run the Sub.
VB: Public ClkBtn As String Public CallMacro As String
I am trying to write a sub that executes a sub in an xla add-in. How can that be done in general?
More specifically I am wondering whether it can be done with the limited info that I have about the add-in and the to be executed macro within the add-in.
assume the name of the xla add-in is test.xla. The add-in is locked. I therefore do not know the name of the sub to be executed nor do I know the "on action" name of the sub in the ribbon. All I have is the Ribbon button label. Assume the ribbon button label is "ButtonLabel".
Is it possible to call the macro just by knowing the ribbon button label? If yes, how does the script look like assuming the above xla and button name?
I have created a custom menu and saved it as an .xla, one of the functions on the menu is to open up a workbook from a file path. The second option on the menu is to run a macro from the custom menu that is saved in this opened workbook.
Is it possible to write a code that will go off and find this macro from this open workbook?
The reason I wanted to do this is so the user has two options to enter data from however I didn't want to copy the macro over from the original workbook as in time the workbook will be updated
I have a named range, which pulls a text value from a vlookup. This text is the name of a vba sub I have written. What I would like to do, is call the macro based on this value. This is what I have so far but I can't get it to run.
Sub ControlSheets() ActiveSheet.Calculate
Hideallsheets Dim MacroSub As String MacroSub = sheets("Control").Range("SheetMacro").Value Call MacroSub 'this is the name taken above that i want to call
i want to create a lot of buttons, one in each line, that, when you click on them, open a file. The filename is in a cell in the same row as the button.
Of course every button should open a different file, and that is the problem. As far as i know (not very much) the buttons can only call other subs, and not with an argument.
What should i put into the "onAction" property of each button, so that each button opens a different file? I really dont want to create hundreds of subs just to get this done, there must be another way.
PS: By the way, how can i delete all but one buttons of a sheet with a vba script? Or shall I open another post for that?
Is it possible to disable The "Look In:" field of the GetOpenFilename dialogue? What I would like to do is to keep users from selecting folders other than the CurrentDirectory settings and if possible to keep the user from deleting,copying and pasteing to the files in the current dirrectory displayed. The code I have is:
I have one macro to call when any value changes in a range of cells then worksheet cvhange event fires and call this macro. This macro is used to copy pivot data from one sheet to the active sheet but this is not pasting the data. here is the code .
I am tyring to make my database as foolproof as possible and one thing I need to be able to do is run a macro when the excel dataform is closed. I am guessing this is a worksheet event, so this is what I put together but it does not sort.
I am Having trouble calling an macro that is not in the module that is calling it. I thought that all I had to do was label the Macro as Public instead of private, but it is not working. If I copy and Paste the Macro code into the module that is calling it, everything works just fine, but this is making it difficult to keep things organized.
I've made a user form and have it entering my data to "Sheet1". How do I get a macro that I already have in module1 in the same wookbook to be ran on "Sheet1" after the user clicks cmd1button. I've tried putting the code from the macro inside the user form with an if statement checking for true on optionbutton1 but it just skips the code. I know it goes to the end because my code to clear the user form values is at the end and it's clearing the form of all values. I can't find the proper way to call a macro inside the user form either.
I have a program that produces data while im working on it, i want to start an excel macro (excel app running in background) from a keyboard shortcut that imports the current data. I cant think of a workaround, letting the macro run on a timer isnt possible since i want to be able to decide when exactly it imports the data, without the need for alt-tabbing out of the program (since its an directX app so alt-tab takes time and is annoying).