Running A Macro When A Value Is Reached In A Specific Cell Used To Call Up Macro

Jan 7, 2009

I have a Sheet sheet1 and I want to run a macro when the cell D2 in Sheet1 is equal to 10,7,5,and 3. I only want this macro to run when those values are reached the macro then puts the data onto a sheet called wps. The macro is run as a module and is a sub macro.

View 9 Replies


Call Macro When Clicking In Specific Cell From Personal Macro Workbook

Aug 13, 2014

This is the code I use to call a macro when the macro Im calling is in the same workbook.


However, I would like to call this same macro when using another workbook. I copied the macro "Clearformating" and pasted into a personal macro workbook module. However when I add this code to the sheet tab it will not run the macro.

I also tried this code.

[Code] .....

View 2 Replies View Related

Repeat Macro Until Empty Cell Is Reached

May 6, 2014

I have the following Macro to transpose data from a column into succesive rows. I need it to repeat, until it has processed all data in column A / until it reaches an empty cell in A.

Sub Macro1()
' Macro1 Macro


View 3 Replies View Related

Running A Macro At A Specific Time

Jun 5, 2009

I want to know if I can schedule a macro to run at specific times?

If so would 6 requests at the same time slow excel down?

View 6 Replies View Related

Keep Row HIDDEN Until Specific Cell Has Been Reached

Feb 12, 2007

I want to Freeze my Header Row (A16 to T16) on my spreadsheet but I can't seem to get it to freeze. I wanted to have it freeze when that row reached the Top of the page but all I can do is freeze it and the 15 rows above it. Can one row be made to be visible at all times? I don't think so as I asked this question before but thought I would start by asking it again...

Now my workaround for that was to put the header row at the top of the page as well and freeze it. This works but when you initially open the spreadsheet it look weird because you see a header row on top and one 15 rows below it.

My question is is there a way to hide row 1 until a specific cell becomes active and then the code can undide the row? I want row one to become visible when the user gets to cell A41. Does anyone know how I can accomplish this or do you have any other suggestions for me to try?

View 9 Replies View Related

Call Macro - Use Macro Name From Cell?

Sep 30, 2009

My question: Is it possible to write a code that calls the macro with the name specified in a particular cell? Right now I have some AutoFilter going on making a list that has numbers 1, 2, 3... I also have alot of macros named Search1, Search2, Search3... So I can make a cell, say A28, that combines "Search" with whatever number is in Column C, row 29:

View 2 Replies View Related

SUM Until Specific Cell Is Reached And Heading Return?

Nov 18, 2013

I have a number of dates (columns) and under each date there is the demand value (Rows). Also, i have a column that has the current inventory. what im trying to do is to keep on adding the demand in one row (i.e multiple dates) until the sum just exceeds the inventory. After that, i would like to return sum the date at which we stopped adding. the point of this excercise is to see at which month will our inventory deplete according to the demand. Below is an example solved by hand.

Part #
month 1
month 2


View 9 Replies View Related

Call Macro On Entering Cell Value

Feb 9, 2013

I have a macro that is woking that is activated either via Ctrl-p or by an icon in my quick links.

I would like to call the macro when I enter text in the input cell C7.

At the moment I enter text in C7 and then call the macro to perform a series of tasks.

I would like to make the macro and tasks perform when I enter the text in C7 and hit return or enter key.

Is this possible??????

View 3 Replies View Related

Call Macro On Any Value Being Entered In A Cell

Oct 23, 2007

I'm trying to create a macro that will check that an Swedish corporate identification number (CIN) is correct. Swedish CIN conist of 10 numbers and are always written 123456-7890. The last number is a control digit to see if the CIN is correct. I've managed to get the macro working but I am not able to get it to work automatically. that is I want the macro to start running immediately after you have entered a companys CIN. In my template you are supposed to enter the CIN in cell A1, and I want the macro to check that immedately when you have pressed "enter". I can not get it to work. the macro works when I do it manually, that is Tools>Macro>Macro..>Run. I've read all about it here but I guess I just don't get it

View 5 Replies View Related

For EACH Cell In Specific Range Meeting Specific Criteria - Call Sub

Jul 1, 2014

Looking to have a macro call a subroutine every time it finds a cell meeting specific criteria.

Code in plain english would look like this:

For EACH cell in range A1:BZ500 meeting the following criteria:

Cell value is a date


Cell's date is at least a week or more in the future


Cell background (Fill) = RGB color code: (R:191 G:191 B:191)

DO the following:

Call repeatingsub

View 11 Replies View Related

Add Macro To Call Subs Depending On Cell Value

May 16, 2014

I am trying to add a macro to the ACCT DATA sheet, which calls one of two subs (AddCarriertoChecklist() - or - ClrPolChList() located in seperate modules). The macro should call them depending on whether "X" is entered in a cell in column "E". The issue lies in that I have macros doing a few things to this sheet already, and I am unable to tie this one in.

I have the two subs (AddCarriertoChecklist() - or - ClrPolChList()) working. I just can't seem to get them called. This small bit is how I was attempting to call them.

[Code] ......

Below is how I currently have it tied in with the rest of the code for this sheet:

[Code] .....

What is it that I am missing?

View 2 Replies View Related

Call Macro Based On Selected Cell Value?

Dec 27, 2012

code to do the following:

If any cell in range T75:KH1000 is selected whose value is "Exit", call the macro named View6.

(There are about 40 non-contiguous cells in this range whose value is "Exit".)

View 2 Replies View Related

Split Up Huge Macro Using Call Macro But Pivot Table Code Errors Out?

Jul 10, 2012

I'm using a CALL Macro to split up a HUGE macro into different pieces:

'Macro recorded 12/14/2010 by Ryan R. Koleno, Pharm.D.
'Last Updated 7/10/12 by Ryan R. Koleno, Pharm.D.
'Do Not Modify Code Unless Given Proper Privileges to do so.
Dim APPSPD As Worksheet
With Application
.ScreenUpdating = False
.Calculation = xlCalculationManual


The first few macros dealing with page setup and what not work fine but when it hits the Pivot table code for the STATSPIVOT macro it errors out stating: "Run-time error '1004': Unable to get the PivotItems property of PivotField class' at this point in the code:

objField2.PivotItems( _
"TRC").Position = 1
objField.PivotItems( _
"MEDCO MAIL OR AOB").Position = 2

When this macro is not split up it worked fine as written. Am I overlooking something in the Call Macro's code or is there a variable I'm not aware of. I have included the Pivot Table code that errors out as well.

Sheets("STATS DATA").Select
Dim objTable As PivotTable, objField As PivotField
ActiveWorkbook.Sheets("STATS DATA").Select


View 4 Replies View Related

Call Or Go Back To Macro After User Action Such As Clicking In A Cell

Sep 27, 2012

I am about to write a small macro to do a iteration calculation. I would like though for the user to select me a cell so that the macro uses the value in that cell to start calculations. Now, what I think would be the problem is how do I code a "time" or notice an action such as clicking in a cell to continue with the macro.

Would it be by inserting a pause in the code of a certain time so that gives the user time to click and wait for the code to start? If so, how would much time is enough? Is there another thing that could restart the code such as "noticing a click in a cell" command in VBA?

View 1 Replies View Related

Macro To Generate Email When Number Reached?

Feb 6, 2014

I have a spreadsheet that in column A has someones name, in Column B it has a number.

For example

Column A Column B
Bob Smith 1999

I am looking for a macro that will automatically send an email to this address for example, when the number in column B reaches 1200.

I need the email to have in the body - "Bob Smith has reached 1200"

I need this macro to run against 20 sheets in my workbook.

View 4 Replies View Related

Macro To Paste Values Until Count Reached?

Sep 17, 2012

On Sheet1, I have a list of names in Column A, with a corresponding value in Column B






On Sheet2, I have a list of items that need to be assigned based on the values on Sheet1 (Assign to column would be blank, filled in by the macro/formula)







best way to automate the data on Sheet2? The items can be assigned in any order, it just needs to match the count on Sheet1.

View 4 Replies View Related

Automatically Call Macro Based On Changed Cell Address & Text

Apr 13, 2009

I have the following code pasted into the worksheet module which used to work fine but no longer does. I didn't touch the code, it just stopped working.

Private Sub WorkSheet_Change(ByVal Target As Range)
Select Case Target.Address
Case "$A$16"
Select Case Target
Case "Custom Color 1": Call CustomColorInput1
Case "Custom Color 2": Call CustomColorInput1
Case "Custom Color 3": Call CustomColorInput1
Case "Custom Color 4": Call CustomColorInput1
Case Else:
End Select
Case "$A$17"
Select Case Target
Case "Custom Color 1": Call CustomColorInput2
Case "Custom Color 2": Call CustomColorInput2
Case "Custom Color 3": Call CustomColorInput2
Case "Custom Color 4": Call CustomColorInput2
Case Else:
End Select
Case "$A$18"

CustomColorInput 1-6 are the same except they input data into different cells F16-F21.

When I attach any of the CustomColorInput macros to a button it works fine. When I try to call it from the worksheet module, the data input box pops up but the data doesn't get entered into the cell. When I try to step through the CustomColorInput macros using F8, the input box pops up, I enter data and press ok. Then I continue with F8 and the debugger jumps to a custom function that I entered (below), which is not called for and is in no way related to the code.

Function PullAfterLast(rCell As Range, strLast As String)
PullAfterLast = Mid(rCell, InStrRev(rCell, strLast) + 1, 256)
End Function

When I close VBA, the data that I typed into the data input box is in the correct cell.

So basically, I'm getting three different responses from the offending code depending on how I call it up. Can anyone tell me what's going on?

More generally, in this and previous occasions, I've had problems with macros that cease to work for no reason that is apparent to me. What are some things that would cause a macro to stop working, without actually changing the code (other than the obvious, like referring to names or worksheets etc. that don't exist anymore)?

View 9 Replies View Related

Running Macro From A Cell

Jul 23, 2014

I am trying to utilise a vba script for DNS resolution which i got from Followup: DNS Lookup and Ping in Excel - CodeProject

I have a list of IP addresses that I want to use this on, however if I test this by using the test instructions, excel does nothing, its just text in a cell, so I would like to know how would this procedure get called from the spreadsheet?


GetHostname("") in any Excel cell.


Use: GetIpAddress("") in any Excel cell.

View 3 Replies View Related

Running Macro On Cell Change?

Jul 31, 2014

I am trying to run a macro when any cell in a range changes. I have got this to run, but only on one cell, not any of the cells in a range.

Working code:


Non working Code:

[Code] .........

I am at a loss as to why the range code won't work, or why the first code won't work without makig the cell reference absolute.

View 3 Replies View Related

Macro Only Running One Cell At A Time

Mar 25, 2014

I am new to the whole MACRO VBA thing and I am desperately trying to learn. So this is the Situation. I recorded a macro of an If statement on a row. very simple. Some of the rows below ( Like 700) need the same formula that I recorded. I would like to highlight the cells that need the formula and run the macro on them. however the macro only runs one at a time. Is there a way that this can be avoided?

View 11 Replies View Related

Running Macro After Typing Into A Cell?

Mar 23, 2012

Is it possible to have a macro run as soon as there is text typed into cell A2? Basically, I have a form that needs to be filled out, but somehow, users forget to put their name in the box. So I don't want any information to be able to be typed in until a name is entered.

View 9 Replies View Related

VBA - Macro Running On Cell Change

Apr 17, 2012

I have following macro run when the given cell changes:

HTML Code:

Private Sub Case_Checkout(ByVal Target As Range)
Dim KeyCells As Range
Dim WS As Worksheet
Dim LkUpVal As Range
Dim LkUpRng As Range


It was working...and then just stopped working. I scan a barcode into cell A1 and hit enter. Can't figure out why is stopped unhiding the tab. I haven't changed anything...

View 1 Replies View Related

Prevent Macro From Running If Cell Is Red

Apr 29, 2008

I have a macro that is run by clicking on a macro button. The macro copies the data from Sheet1 and pastes it in another sheet, Sheet2. I added some conditional formatting that colors certain cells red if others are blank on Sheet1. I would like to add some code to my macro that will not allow it to copy and paste from sheet1 to sheet2 if there are any red cells in the range.

View 9 Replies View Related

Check Cell Before Running Macro

Feb 16, 2010

I need to check cell G5 (which is G4-G3) before running a macro. if G5 is zero i need to pop up a message to inform the user to enter data in cells G3 & G4. And if G5 is greater than Zero the macro shud run.

View 10 Replies View Related

Macro To Copy Specific Cells From Row From Source & Stop When Next Row Cell = Specific Value

Nov 7, 2008

I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)

After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.

Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.

Sheets("ee template").Copy After:=Sheets(3)
ActiveCell.Offset(0, -11).Range("A1").Select

View 9 Replies View Related

Running Totals In A Single Cell- Macro

Feb 2, 2009

I have been trying to find a macro that would allow me to keep a running total in a cell by adding a number to that cell and the same cell would display the sum of the numbers entered. {i.e.} If cell a1 has 0 in it and i click on that cell and put 3 in it would display 3 if i added 2 to it it would display 5 and so on. I need it to do this for about 182 cells on one page.I found this macro that runs automatically every time and works great......But only for one cell so far..."D3"...Ugh!!! I need this macro to work for the following range of cells "colums d thru j from row 3 down to 28 in each colum. Each cell is an individual. There are 182 cells total that each need this macro to work ...all on one page

Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Static dAccumulator As Double
With Target
If .Address(False, False) = "D3" Then
If Not IsEmpty(.Value) And IsNumeric(.Value) Then
dAccumulator = dAccumulator + .Value
dAccumulator = 0
End If
Application.EnableEvents = False
.Value = dAccumulator
Application.EnableEvents = True
End If
End With
End Sub

As you see the macro includes cell D3 only, I have made several attempts to include more cells but have failed.... I tried like this

If .Address(False, False) = "D3,E3,F3,G3,H3,I3,J3,D4,E4...and so on" Then

I have tried ....If .Address(False, False) = "D3:J3" Then
and I have tried ....If .Address(False, False) = "23Rx7C" Then
I can make it work for cell d3 but not the others. Will I have to repeat this code for every cell?

View 9 Replies View Related

Return To Initial Cell After Running Macro

Oct 24, 2007

I've a workbook with 3 tabs with names "tab1, tab2, difference" and I've a macro that calculates tab1-tab2 and puts the results in tab "difference" This macro runs every time I open the workbook or every time dataset is refreshed on any tab.
everything works great but i've following issue.

let's say my cursor is in tab2 & i refresh/update dataset on tab2 which will trigger macro to update values in tab "difference".. this is good. but, soon after macro runs & updates tab "difference", cursor is no more in tab2 but in tab "difference" this is OK if I've 1 or 2 or few tabs but i've 25 tabs & the user has to go back to the initial tab everytime dataset is updated on any tab. Is there a way for the macro to recognize where the cursor initiallly was & run the macro & place the cursor back to the initial tab?

View 2 Replies View Related

Macro Stops Running The Macro Completely And Hangs In The Middle

Jul 3, 2007

Here in our department we made a pretty elaborate macro that takes a report and sorts them out to 17 different sheets in a one workbook. This Macro pulls a file from a specific location on our server and then opens the CSV sorts it out color codes all the important information and saves it back onto the server under you specific initials.

They are four PC's along with our Managers laptop that run this Macro daily.

About 3 weeks ago my Managers laptop stops running the Macro completely and hangs in the middle of the whole thing. Eventually crashing Excel.

We try to remove the modules and re-import them back into the personal macro workbork but this does not work. The Macro's did not change and still fully function on the other four desktops to this day.

I uninstall Office on my Managers laptop and reinstall. Import the Modules again and still hangs up in very same spot it did 3 weeks ago.

I've tried to lower the macro security to the lowest level also and I've still had no luck with this laptop. I don't understand. The Macro's function perfectly on other PC's but will not function on this laptop.

View 9 Replies View Related

Macro To Call Another Macro AFTER Ending

Apr 20, 2009

I want to execute a macro (MyMacro()) AFTER a different macro (Different_Macro()) ends. Different_Macro() is always run from a menu button while editing a codepane in the VBE. At the end of Different_Macro I have this code:

View 5 Replies View Related

Macro Running Very Slow - Cell (press Esc To Cancel)

Dec 10, 2009

I have written some very basic code to format a report in excel. When I run the code it take a very long time to execute and I receive the following error message at the foot of the page:

Cell (press esc to cancel)

Annoyingly I have had this error before and found the solution on the web but can't remember where. If memory serves my right I deleted some temp files from a specific location on my hard drive?

View 3 Replies View Related

Copyrights 2005-15, All rights reserved