I have a macro that is woking that is activated either via Ctrl-p or by an icon in my quick links.
I would like to call the macro when I enter text in the input cell C7.
At the moment I enter text in C7 and then call the macro to perform a series of tasks.
I would like to make the macro and tasks perform when I enter the text in C7 and hit return or enter key.
Is this possible??????
This is the code I use to call a macro when the macro Im calling is in the same workbook.
[Code].....
However, I would like to call this same macro when using another workbook. I copied the macro "Clearformating" and pasted into a personal macro workbook module. However when I add this code to the sheet tab it will not run the macro.
I also tried this code.
[Code] .....
I have a Sheet sheet1 and I want to run a macro when the cell D2 in Sheet1 is equal to 10,7,5,and 3. I only want this macro to run when those values are reached the macro then puts the data onto a sheet called wps. The macro is run as a module and is a sub macro.
In one column (Column A) I have a column of data which contains long descriptive text - i want to extract a specific piece of text from this descriptive text and enter it into the next Column (Column B).
E.g. Cell A1 = "Hello Buddy, how are you?" - i want to extract the word Buddy and enter it into cell B1
then A2 into B2, A3 into B3, etc, etc,...
Is there a simple macro out there that can do this?
I'm trying to create a macro that will check that an Swedish corporate identification number (CIN) is correct. Swedish CIN conist of 10 numbers and are always written 123456-7890. The last number is a control digit to see if the CIN is correct. I've managed to get the macro working but I am not able to get it to work automatically. that is I want the macro to start running immediately after you have entered a companys CIN. In my template you are supposed to enter the CIN in cell A1, and I want the macro to check that immedately when you have pressed "enter". I can not get it to work. the macro works when I do it manually, that is Tools>Macro>Macro..>Run. I've read all about it here but I guess I just don't get it
View 5 Replies View RelatedI am trying to add a macro to the ACCT DATA sheet, which calls one of two subs (AddCarriertoChecklist() - or - ClrPolChList() located in seperate modules). The macro should call them depending on whether "X" is entered in a cell in column "E". The issue lies in that I have macros doing a few things to this sheet already, and I am unable to tie this one in.
I have the two subs (AddCarriertoChecklist() - or - ClrPolChList()) working. I just can't seem to get them called. This small bit is how I was attempting to call them.
[Code] ......
Below is how I currently have it tied in with the rest of the code for this sheet:
[Code] .....
What is it that I am missing?
code to do the following:
If any cell in range T75:KH1000 is selected whose value is "Exit", call the macro named View6.
(There are about 40 non-contiguous cells in this range whose value is "Exit".)
I am about to write a small macro to do a iteration calculation. I would like though for the user to select me a cell so that the macro uses the value in that cell to start calculations. Now, what I think would be the problem is how do I code a "time" or notice an action such as clicking in a cell to continue with the macro.
Would it be by inserting a pause in the code of a certain time so that gives the user time to click and wait for the code to start? If so, how would much time is enough? Is there another thing that could restart the code such as "noticing a click in a cell" command in VBA?
I have the following code pasted into the worksheet module which used to work fine but no longer does. I didn't touch the code, it just stopped working.
Private Sub WorkSheet_Change(ByVal Target As Range)
Select Case Target.Address
Case "$A$16"
Select Case Target
Case "Custom Color 1": Call CustomColorInput1
Case "Custom Color 2": Call CustomColorInput1
Case "Custom Color 3": Call CustomColorInput1
Case "Custom Color 4": Call CustomColorInput1
Case Else:
End Select
Case "$A$17"
Select Case Target
Case "Custom Color 1": Call CustomColorInput2
Case "Custom Color 2": Call CustomColorInput2
Case "Custom Color 3": Call CustomColorInput2
Case "Custom Color 4": Call CustomColorInput2
Case Else:
End Select
Case "$A$18"
CustomColorInput 1-6 are the same except they input data into different cells F16-F21.
When I attach any of the CustomColorInput macros to a button it works fine. When I try to call it from the worksheet module, the data input box pops up but the data doesn't get entered into the cell. When I try to step through the CustomColorInput macros using F8, the input box pops up, I enter data and press ok. Then I continue with F8 and the debugger jumps to a custom function that I entered (below), which is not called for and is in no way related to the code.
Function PullAfterLast(rCell As Range, strLast As String)
PullAfterLast = Mid(rCell, InStrRev(rCell, strLast) + 1, 256)
End Function
When I close VBA, the data that I typed into the data input box is in the correct cell.
So basically, I'm getting three different responses from the offending code depending on how I call it up. Can anyone tell me what's going on?
More generally, in this and previous occasions, I've had problems with macros that cease to work for no reason that is apparent to me. What are some things that would cause a macro to stop working, without actually changing the code (other than the obvious, like referring to names or worksheets etc. that don't exist anymore)?
My question: Is it possible to write a code that calls the macro with the name specified in a particular cell? Right now I have some AutoFilter going on making a list that has numbers 1, 2, 3... I also have alot of macros named Search1, Search2, Search3... So I can make a cell, say A28, that combines "Search" with whatever number is in Column C, row 29:
View 2 Replies View RelatedI'm using a CALL Macro to split up a HUGE macro into different pieces:
Code:
Sub RSLDASHBOARDV2()
'Macro recorded 12/14/2010 by Ryan R. Koleno, Pharm.D.
'Last Updated 7/10/12 by Ryan R. Koleno, Pharm.D.
'Do Not Modify Code Unless Given Proper Privileges to do so.
Dim APPSPD As Worksheet
With Application
.ScreenUpdating = False
.Calculation = xlCalculationManual
[code]...
The first few macros dealing with page setup and what not work fine but when it hits the Pivot table code for the STATSPIVOT macro it errors out stating: "Run-time error '1004': Unable to get the PivotItems property of PivotField class' at this point in the code:
Code:
objField2.PivotItems( _
"TRC").Position = 1
objField.PivotItems( _
"MEDCO MAIL OR AOB").Position = 2
When this macro is not split up it worked fine as written. Am I overlooking something in the Call Macro's code or is there a variable I'm not aware of. I have included the Pivot Table code that errors out as well.
Code:
Sub STATSPIVOT()
'STATS PAGE BASED ON STATS DATA TAB
Sheets("STATS DATA").Select
Dim objTable As PivotTable, objField As PivotField
ActiveWorkbook.Sheets("STATS DATA").Select
Range("A1").Select
[code]...
I will have to insert the below table in the worksheet area whereever I am working. Batch No.Doc. No.DateRemarks22-May-12
Fox example I require the "Batch No." in the ActiveCell and "Doc No." in the same row next column, "Date" in the same row and next column and "Remarks" in the same row next column. I also require the Today's date below the "Date", by using =Today() function of excel.
I will have to repeat the above table over 100's of times.
I have a work book with 3 sheets. Sheet 1 is the main sheet and sheets 2 and 3 will use (I hope vlookup) to update 3 columns from info in sheet 1. my attempt at a vlookup call in sheet 2 is: =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
my understanding is that: - $b3 is the cell in sheet 2 that will be updated as a result of the vlookup call. - [master_AoJ_2.xls]Sheet1!$B$3;$B$65 refers to range $B$3:$B$65 on sheet1 of master_AoJ_2. it does not work... infact I get nothing at all. when I type the call into cell $b3 of sheet2 excel thinks it is stariaght text. this is how I coded the function call =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
i have a workbook that is doing a copy and paste between 2 workbooks.
the trouble i am having is every month workbook a changes to be the name of the current month and year workbook b never changes. so when a change in month happens the macro stops working due to new workbook name.
how could i have the macro reed the name of the work book and input that name into the necessary locations withing the macro.
i want a macro that will start on D25 and enter a 1 for five rows up to D29
than change and enter a 2 starting on d30 and enter a 2 for five rows
up to D34 than change an enter a 3 up to D39 ....... on and on up D225.
I have a concatenated value in a column D (from three colums A, B and C). Whenever a user enters data in colums A, B and C, I would like to get a sorted list of values from column D to be populated in column E. I use the sorted values in Column E for a dropdown list in another worksheet. Could somebody help me with the macro code?
View 9 Replies View RelatedI have UDF and would like to use a Macro Button to have it run whenever I need to. Now I have to disable macros with notification in trust center and after entering data, enable content. I have my UDF in a module, is it possible to have another module with a macro so I can run this UDF whenever I need to?
[Code] .....
I have an excel sheet which has a macro which captures the current time in a cell with the formula =now(). What I am looking for is that once a user runs a macro and the time is inserted into that cell then that cell should be locked and cannot be changed then. If this can be done by any formula / function or VBA.
View 2 Replies View RelatedI am trying to run different macros by clicking various different buttons on the sheet, I then want different data to load into the user form depending which button was pressed. So I have buttons named "SV_1" and another named "SV_2". when either button is pressed then it runs a common macro that gets the name of the calling item. then I want to add "Macro" to the beginning of the calling item name and then call that macro. here is the code that I am working with, when using a watch i can see the value of the variable is "MacroSV_1" when button 1 is pressed but I cannot get it to run the Sub.
VB:
Public ClkBtn As String
Public CallMacro As String
Sub ItemCall()
[Code] ......
I am trying to write a sub that executes a sub in an xla add-in. How can that be done in general?
More specifically I am wondering whether it can be done with the limited info that I have about the add-in and the to be executed macro within the add-in.
assume the name of the xla add-in is test.xla. The add-in is locked. I therefore do not know the name of the sub to be executed nor do I know the "on action" name of the sub in the ribbon. All I have is the Ribbon button label. Assume the ribbon button label is "ButtonLabel".
Is it possible to call the macro just by knowing the ribbon button label? If yes, how does the script look like assuming the above xla and button name?
I've created a simple UserForm, and with some great help from royUK. I've managed to get it working to suite my needs. The next thing I need to do is call it when the user runs the macro.
How do I call the UserForm from within the macro that I created?
Once the user gives the input, how do I take the values and pass them to the loop in the macro?
I have a macro call psc in one module
in a different module I would like to "call psc"
however, this does not work
I have created a custom menu and saved it as an .xla, one of the functions on the menu is to open up a workbook from a file path. The second option on the menu is to run a macro from the custom menu that is saved in this opened workbook.
Is it possible to write a code that will go off and find this macro from this open workbook?
The reason I wanted to do this is so the user has two options to enter data from however I didn't want to copy the macro over from the original workbook as in time the workbook will be updated
I have a named range, which pulls a text value from a vlookup. This text is the name of a vba sub I have written. What I would like to do, is call the macro based on this value. This is what I have so far but I can't get it to run.
Code:
Sub ControlSheets()
ActiveSheet.Calculate
Hideallsheets
Dim MacroSub As String
MacroSub = sheets("Control").Range("SheetMacro").Value
Call MacroSub 'this is the name taken above that i want to call
End Sub
Any way to actually execute a macro stored as a text file?
Without being long winded - I want to create different macro and physically save them as text files. Once saved - I could call them from a list.
can i use a hyperlink to call/invoke a macro...?
View 5 Replies View Relatedi want to create a lot of buttons, one in each line, that, when you click on them, open a file. The filename is in a cell in the same row as the button.
Of course every button should open a different file, and that is the problem. As far as i know (not very much) the buttons can only call other subs, and not with an argument.
What should i put into the "onAction" property of each button, so that each button opens a different file? I really dont want to create hundreds of subs just to get this done, there must be another way.
PS: By the way, how can i delete all but one buttons of a sheet with a vba script? Or shall I open another post for that?
This is what I'm trying to do:
1. When a user clicks on a Drop down box and selects "Add New", I would like a Macro to run
2. I want this Macro to open up a Dialog/Text box to say "Enter New Information" where the user can enter in some text
3. The text that is entered by the user into this box will be added as a new entry into the Drop down box selection
My VBA knowledge is still at a beginner's level and I know how to get a Macro to run based on a cell value. However I don't know how to create a Macro for the dialog box nor do I know how to create a Macro for updating the drop-down items.
I have one macro to call when any value changes in a range of cells then worksheet cvhange event fires and call this macro. This macro is used to copy pivot data from one sheet to the active sheet but this is not pasting the data. here is the code .
[Code] ......
I've got a macro working that updates things in different sheets, the sheets have peoples names in (this can't be changed).
When running the macro its fine, but if a new person is added i would need to update the macro for every sheet (the macro can be run from every sheet within the workbook).
I've noticed if you right click the sheet button and go to properties (or something) that it shows (Name) Sheet2 and Name Joe Blogs.
Instead of the macro calling to Name i want it to call to (Name), is this possible?
The code that calls the sheet looks something like this:
Sheets.("Joe Blogs")
Instead of looking for Joe Blogs i want it to look for Sheet2
