Interpolate Two-dimensional Array
With a known X and Y, trying to solve for Z from a table. ie: IF a variable X is defined across a row, another variable Y defined down a column, the data field Z fills in-between. What do I need to use to interpolate for both X and Y to solve for Z?
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Creating A 2-dimensional Array From A 1-dimensional List
I've been a lurker on this forum for a long while and it's always been able to provide me with lots of excel tips, and for that I am grateful! But this time I have a question that I can't find the answer to here, or anywhere else on the web after a few hours of looking. As a note, I'm not very experienced with Excel, probably somewhere between novice and intermediate. What I need to create is a 2-dimensional array of data. The vertical (y-axis) are the tools, and the horizontal (x-axis) are the jobs. Where the y-axis and the x-axis intersect, will be the quantity of tools needed for that specific job. There are almost 1500 tools, and 100 jobs.
View Replies!
View Related
Interpolate An Array Of Numbers
I have an array of data like below: 1 3 5 7 9 I need that array interpolated to say 20 data points but the first and 20th data point must be the actual first and last data point of the array (1 & 9 in the example). I have downloaded the xlfun software but the interpolat function only does 1 point at a time...than as you drag the function down it changes the initial array. Of course I realy have anywhere from 40-60 data points to be interpolated to 100.
View Replies!
View Related
Function For 2-dimensional Array
I am trying to write a public function that fills a table for a 2-dimensional array and am having trouble with my named ranges. The x-axis is based on years (range F2:O2) and the y-axis is a q_factor (range E3:E23) so the data range would be (F3:O23. The following outlines my logic: Public Function bondValue(years As Range, q_factor As Range, z As Double) Dim nRow As Long, nCol As Long Dim bondPort As Range nRow = q_factor.Rows.Count nCol = years.Columns.Count sumTau = 0
View Replies!
View Related
Summing In A Multi Dimensional Array
I've created an array that is 60 pairs of cells wide. Each row in the array represents a different account. The 60 pairs of cells contain up to 60 payments in a payment stream. The first cell of each pair may contain an amount of interest to be paid, or zero if the time band in which it was/will be paid is not within the time range that I'm evaluating. The second cell of each pair may contain a number between 1 and 10 representing the time band in which the interest will be paid, or zero if the payment date falls outside of the time bands. I need to be able to sum the interest to be paid in each time band for all of the accounts in my database. Is there an Excel function that I could use or will I need to write some VBA code to loop through each row?
View Replies!
View Related
Multi-dimensional Array Solution
I am currently using a macro which highlights keywords and associated page views from an array in my website stats spreadsheet. Now I need to take it to the next level: I want to use a multi-dimensional array to pull out any keywords that are duplicated, and display them at the top of my spreadsheet with the totaled page views next to them in a different color (red). Here is my existing Keyword highlighting Sub Highlight_Keywords() Dim vntWords As Variant Dim lngIndex As Long Dim rngFind As Range Dim strFirstAddress As String Dim lngPos As Long
View Replies!
View Related
Populating A Multi-dimensional Array
I have a spreadsheet which I will be adding to over time. I need a macro that will look for the last 10 rows and then pull together a summary table based on data from several of the columns on each of those rows. I've tried to go about this by using an array. The array will always be the same size (it will always be 10 by 11, i.e. EngineArray(10,11)-basically the same size as my summary table). I've also set Option Base 1. What I’ve got so far is below. It isn’t working properly though. To start with I was getting ‘type mismatch errors’. Now instead of reading the numbers from the selected cells into the array, it just changes all the cells I’m trying to read from to ‘TRUE’?
View Replies!
View Related
Fill ComboBox With 2 Dimensional Array
I can set up a 2 dimensional array by using array = Workbooks("Workbook.xls").Worksheets("Data"). Range("D_all") as range D-all contains 2 columns and 20 rows I can send that list to a combo box by using Me.ComboBox1.List() = array If I have ColumnCount set to 2 then both columns will be listed If I have ColumnCount set to 1 then the 1st part of the array will be listed But how do I list just the 2nd part of the array
View Replies!
View Related
Data Type Of Coordinates Of 2-dimensional Array
I have a big array "DataArray" and want to access it: For i = 1 To 4 variable = DataArray(SourceArray(i)) Next i "DataArray" has two dimensions, so SourceArray has to consist of data like this: SourceArray(1) = 1,2 sourceArray(2) = 2,4 etc What data type does Sourcearray have to be? Integer doesnt seem to work, and DataArray doesnt like a string as coordinates. I have a workaround with two different arrays of integer for x and y coordinates, but this cannot be it.
View Replies!
View Related
Evaluate Multi-Dimensional Array Matrix
I'm trying to use VBA to do some matrix processing. I have successfully done matrix processing in the spreadsheet, but I'm looking to port the logic into VBA to more easily reuse central formulas and reduce the amount of code in the spreadsheet. The function shown below works. I had to hack around the variable declarations to eliminate processing/compile errors but it seems to function (no pun intended). While debugging I noticed that this function would seem to get called 4 times. I do have other modules running, although I don't think any other modules are affecting this. After some input from shg, I updated the variable declarations, but I'm getting an "Overflow" error reported. Sometimes (not always) a divide by zero also pops up. I do have the Msgbox for errors at the end, I haven't tried removing that part to see if the error reporting vanishes. I'm not sure 'hiding' error alerts is the best thing to do anyway...
View Replies!
View Related
Multi-dimensional Array Not Showing In Listbox
I have made the function below to return a variant multidimensional array. I pass the function an array of folder paths that I wish to search through looking at subfolders within that path where their name matches a search string that I pass to the function. eg., it will find a folder named "Catnap" if you pass the string searching for as "Cat*". The size of the array it builds depends on how many folders it finds that match the search string and so needs to be built dynamically. Hence, I believe it builds a 2 dimensional array horizontally and I transpose it at the end of the function. In each element I put the folder name that was found in the first dimension and the path to that folder in its second dimension. I have a 2 column listbox on a form that I set this array to. eg., Me.ListBox1.List = DirPaths("C:","Cat*",vbDirectory,100) This works fine and shows a list of folder items found by folder and path in the two columns of the listbox if there is greater than 1 search found. However, when the search only finds 1 then the listbox shows the folder name with the folder path in row 2 of the list box. (See below).....
View Replies!
View Related
Fill Range From Multi-dimensional Array
I searched and found a few posts about transposing arrays into a range of cells, but none of them seemed to solve my problem. So, my problem is, I have a .Net assembly which provides various functions to allow Excel to access our Oracle DB stored procedures/tables, etc. This assembly is exposed via COM Interop. I call the GetSPINTypes() method, which returns me a list of type pairs (ID, Name), in a CSV string format. I split the CSV into rows, and then put each row into a 2-dimensional array. I then need to dump that array into one of my sheets in Excel, so I try to do the usual Range.Value = Array, but this sometimes tells me there is a type mismatch, and most times just doesn't fill the range. I've checked my arrays in the watch window, and they have definitely been filled in correctly, the values just don't appear when they are put into the sheet. See the code I'm using below:......
View Replies!
View Related
Join Dynamic Multi-dimensional Array
the built in "Join" function can join all elements of a 1-dimensional array into a string with delimiter. Now, how do I do that with multi-dimensional array if I just want to join 1 dimension of it. For instance, I have: m = 10 n = 20 Redim my(m, n) 'assign values to array here... 'I want to join, say, my(5, 0 to n) only 'How to do that without declaring a new 1 dimension array? Also, I want to write a join sub/function to do the above for n-dimensional array, do I need to write each one for every number of dimension (1 sub for 2-dimension, 1 sub for 3 dimension, etc.)?
View Replies!
View Related
Fill & Rearrange Multi-dimensional Array From Another
I've got the folowing array's date1>company1>price >Company2>price >company3>price >enz Date2>company1>price >company2>price >enz enz. But these are not the array's that i need for a correlation that i want to make. Is it possible to transform the array's above to an array such as: Company>date1>price >date2>price >date3>price >enz
View Replies!
View Related
Index And Interpolate
I have data essentially comprising a set of points with x and y coordinates. Is there a way to index and interpolate between points? I can use INDEX or LOOKUP to look up a y value fo a valid x value but don't know a way to interpolate if the value is between x values. Is this possible?
View Replies!
View Related
Obtain An Interpolate Value For Z, Given A Value For X And A Value For Y
I just have a quick question with regards to two-way interpolation of data. I have a data table which has x-values, y-values and z-values. I need to obtain an interpolate value for z, given a value for x and a value for y. The x value specified is 1.569 and the y value specified is 1.66. I know how to use the FORECAST formula for a simple x, y table, but I have no idea what to do here when I need to find a z value, given the x and y values.
View Replies!
View Related
Interpolate Between The Corisponding Values
i have a spreadsheet with a column of numbers in increments of 5 ie 25, 30, 35, 40, 45, 50, etc. and an adjacent column of decending numbers ie 275,273,262,250,238 where the numbers in column b decrease by varying amounts each time. for a given value say 37 i want to interpolate between the corisponding values of 35 and 40 to give an answer.
View Replies!
View Related
Interpolate Missing Values
i'm trying to write a sheet that records weight from a date and user input trouble is people are likely to miss days out and i want to fill in the missing dates weight based on actual inputs from other days. if i make it easier and say it like this column A is the weight, column b is the number of days gone as an example i've made it straight forward but left 4 values out A1616B161 A1515B152 A14B143 A1313B134 A1212B125 A1111B116 A10B107.....................
View Replies!
View Related
Interpolate Between 2 List Of Values
I am looking to write excel function that would be able to interpolate between two list of values. One list containing xValues and another yValues and a x value the specified for which the appropriate y value is to be returned. For the moment I have written a short function interPLinear into which I wish to feed an array and then simply add those together. This is so that I can make sure that my syntax is correct. Unfortunately I am struggling with that at the moment. My function looks like this. Function InterPLinear(xValues() As Double) Dim Sum As Double InterPLinear = 0 InterPLinear = InterPLinear + xValues(1) InterPLinear = InterPLinear + xValues(2) InterPLinear = InterPLinear + xValues(3) InterPLinear = InterPLinear + xValues(4) InterPLinear = InterPLinear + xValues(5) 'I know that there will be only 5 values, will make it generic at a later stage. End Function In the spreadsheet I have created a short table with 5 rows and 1 column with values 1 to 5. In another cell I have entered the following =interplinear(A1:A5) and I have tried the following as well {=interplinear(A1:A5)} Could you perhaps tell me how I can correctly access this function so that it does not return #value I have attached the file if it is needed
View Replies!
View Related
Figure Out How To Interpolate Revenue Values
I have a question on data interpolation with Excel 2007. Normally, this wouldn't be too much of an issue for me, but for some reason I cannot figure it out. I'm working on an Income Statement, which is designed for 5 years. I have values 1 and 5, which are given to me (B7: 3,500,000 and F7: 5,200,000). I'm trying to figure out the other 3 years of revenue assuming a growth trend. The values should fill the series B7:F7.
View Replies!
View Related
Interpolate Along A Column, Where Cells Are Empty
I have pasted 5 fields with some random values that are in A1 to E1. E is the column I am trying to populate to fill in the missing data for C. I have written a function that will interpolate between 2 deltas using the dates. Assuming that June 09 will always have a corresponding delta (e.g. here 33) how can i populate the INTERP column using my YINT function. I can do this manually 1 at a time, but the already-filled cells in the Delta column will not always be the same and manually would take ages....
View Replies!
View Related
Custom Function To Interpolate Table
Actually, I've created the user defined function (UDF) to interpolate (both linear and bilinear). It's just, I keep getting this annoying error that says "A value used in the formula is of the wrong data type." But here's the kicker...I converted the UDF into a subroutine for trouble shooting, and I was able to step through the entire code and get the correct output. Function itcinter(efpd As Single, pwr As Single) As Variant Dim rnge, mtrnge As Range Dim w, x, y, z, xx, yy, b As Single Dim scenario, a As Integer Dim J As Variant scenario = Worksheets("Input").Range("B1").Value pwr = pwr / 100# If (scenario = 1) Then Worksheets("ITC").Select 'Make table into a range for VLookUp Set rnge = Worksheets("ITC").Range("A3", [A3].End(xlDown).End(xlToRight)) Set mtrnge = Worksheets("ITC").Range("A3", [A3].End(xlDown)) 'If the given value does not match a table value exactly On Error Resume Next.......................
View Replies!
View Related
Pass Multiple Tables Into Custom Interpolate Function
I have 5 worksheets each with tables that are formatted the same on each sheet. I have named each table as a named range (ex:filter5tsd15BSF). I have a userdefined function that interpolates values for a single table in a vba module. I can make this function work for a single table by calling the function as =Linterp(filter5tsd15BSF,C12) so I know the function is OK. However, I really rather program this some way that all the tables get passed to the function and then a select case for the conditions for which filter and which TSD (15 or 25) will then select the correct table.
View Replies!
View Related
Dimensional Table
i have a problem with my report. there is a dimensional table: DIM RESULTSDIM_111.1DIM_111.8DIM_111.2DIM_25.3DIM_25.5DIM_380.2DIM_380.1DIM_380.35 i need to make a new table in wich all "dim" will repeat only once and the results will be the average of the results that belongs to the same "dim" the times that the "dim" repeats can change and the "dims" could be not only till 3
View Replies!
View Related
Macro – Two Dimensional Look Up
The workbook has two sheets. Sheet1 has numbers in column A going down the sheet and dates in row 2 going across the sheet starting in column B. Sheet2 is similar but the column and rows do not line up with sheet1. I would like the macro to look at the numbers in column A and the dates in row 2 on sheet1 and find the same match of number and date in sheet2 and enter the value from sheet2 into the appropriate cell in sheet1. I understand it can be done in a formula with index and match but I would prefer a macro.
View Replies!
View Related
Dimensional Weight Formula
I have attached a sheet that contains a pretty simple formula that helps me figure out the dimensional weight of a shipment. It is just a simple vlookup that returns the proper rate (Column H) depending on DIM Weight and Zone. It works great. The issue I'm running into is with various exceptions that I need to put into the formula. The criterias that I need to put into the rate formula (Column H) are: 1-If the one of the Length (Column A), Width (Column B), and Height (Column C) is greater than 60 I need to add 7.50 to the the returned lookup value in Column H. 2-The second longest side the Length (Column A), Width (Column B), and Height (Column C) is greater than 30 I need to add 7.50 to the the returned lookup value in Column H. 3-If the grith (2x Column C + 2x Column B) is greater than 130 I need to add 45 to the the returned lookup value in Column H. I'm working with a few IF formulas but I can't seem to get all of them to work at the same time. Does anyone have any thoughts?
View Replies!
View Related
Bi-dimensional Dynamic Range
I've tried the below formula to get a bi-dimensional dynamic range that is defined by the last no blank column and last no blank row, too. =A1:INDEX(A1:D18,MAX(NOT(ISBLANK($A$1:$D$18))*ROW($A$1:$D$18)),MAX(NOT(ISBLANK($A$1:$D$18))*COLUMN($A$1:$D$18))) Does any one have a different approach to get this without using the offset function?
View Replies!
View Related
2-dimensional Date Range Criteria
Attached is a really simplified version of what I'm trying to accomplish. I'll attempt to get my brain working well enough to explain it: For each row, I have a person's name, their department, their site, and then a series of dates (representing dates of attendence). The four columns after the dates ("Counts" is the first) are me trying to keep all the right numbers in mind, and are the routes I've been trying to take on this. I have also tried to make a custom formula called ClassInRange, which isn't playing nicely. What I eventually need to populate is the little 2x3 section at the bottom where the three sites and the two departments I'm working with (down from 5 sites and 8 departments for the sake of sanity). What I need to be able to do is populate those cells with something that will tell me how many people from which site and department have attended something within the date range. So, for example, I need to know that the 2 guys in Wellesley attended something between January 1st and December 31st of 2007. (American date style, in case anyone's lost) If you're able to help, please keep in mind that I'm not the end-user; I'm just the slightly crazy dude trying to create this thing and make it simple to use. Eventually, the Dept/Site box will be part of a template which is copied and pasted up to four times on a report sheet, each fed by different date-range criteria. Also, the important information is the person's name, dept and site, which I hope gives some reason behind the organization; we want to find the person easily.
View Replies!
View Related
Double Lookup From Two Dimensional Table
I am trying to get a cell in my spreadsheet to look up a value based on two values. I have a dropdown list that lists the worksheets in the workbook, and each worksheet has a table with width measurements for the columns and height measurements for the rows. I have a function that is mostly working, it calls the data from the proper worksheet, but it rounds the measurement values down, and I need it to round to the next highest value on the table. For instance, the measurement may be 55" x 55" in, but the table has values for 54" and 60". The current formula rounds down to the 54" measurement, but I need it to round up to the 60". I have attached what I have so far with further notes and cells highlighted.
View Replies!
View Related
Checking If Variable Is Multi-dimensional
Is there a quick way to check if a variable is an array or multi-dimensional? I am trying to send variables to a sub to print to excel but I am sending mixed variables - some are one dimension, some are two dimensional. Here is what I am using: Private Sub Send(Item As Variant, Top As Integer, ToSheet As String, Row As Integer, Column As Integer) 'Sends values to Excel ' Loop counter Dim i As Integer For i = 0 To Top - 1 ActiveWorkbook. Sheets(ToSheet). Cells(i + Row, Column).Value = Item(i) Next End Sub I suppose I could set up a second routine to handle one dimensional variables, but I thought I would ask the pros -
View Replies!
View Related
2-dimensional Date Range With Dynamic Copy And Paste
Some of you may have seen my 2-dimensional Date Range Criteria thread . By request, that thread has been closed and I am opening a new one on a related, but infinitely more complex note. The solution to the previous thread worked, but not well with my project. I'll go a little more in depth into how my project works, and try not to be too detailed and irritating. I am trying to create a homebrew Learning Management System for some of the Training courses that my department offers. I've posted here a few times on the same project, and the advice from all previous posts has been excellent. What I have so far allows users to input all of the relevant information about a participant, and then keep track of the dates when they took a particular course. They input this information with a Userform. This data goes into a Participant Master List, which is where the majority of the functions take place. There is a Workings sheet set to xlVeryHidden, which houses some other information, including results for searches, and finally there is the Report Template--the source of my original question. The original question was how to make a formula that would track how many people from each department and site have attended training within a date range. That question was answered in the 2-dimensional Date Range Criteria of the report. What makes it potentially more complicated is that a user might want to generate two or three reports at the same time to compare side-by-side. I'm pretty sure I can make something that will do this, and allow it, but the way it's looking could be really complicated--extreme headache, and a lot of VBA coding.
View Replies!
View Related
Lookup Values From A Multi Dimensional Table / Data Sheet
I have a sheet that has to look up value on a report from a sheet sheet that has more than value. Ex) On the report I have values 123A and 1234A On the data tab I have table that has. Ref Tot Value Desc Value1 Value2 Value3 1 123A Widgets 1 2 3 2 123A Widgets 4 5 6 Ref Tot Value Desc Value1 Value2 Value3 1 123B Nuts 7 8 9 5 123B Nuts 1 3 5 Ref Tot Value Desc Value1 Value2 Value3 7 1234A Bolts 2 4 6 11 1234A Bolts 3 5 8 So the report need find the values for Value 1, 2, 3 on where the value matches the data tab.
View Replies!
View Related
Converting 3x10 Array To A 1X30 Array To Run A Match Formula
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1. Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows? Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet. And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column. I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
View Replies!
View Related
Filter An Array (the Longer One) Using The Shorter Array As The Criteria
I am trying to filter an array (the longer one) using the shorter array as the criteria. I am currently doing this using the following method IF(LOOKUP(lookup cell, array)=lookupcell, lookupcell, "FALSE") I then copy and paste 'values' and filter out the 'false' to get my final result. This has worked in the past, but for some reason that I simply can't figure out, the formula isnt working! I've attached the example, and I've highlighted a number in blue (cell E522 and C103), (that should be being found in the 'LOOKUP' function) but is returning a "FALSE". I have looked over the code and simply can't figure out why Excel isn't returning the right value. This is obviously happening for a quite a few of my numbers, as my filter result is returning an array that is about 1500 shorter than it should be. I have highlighted E522 as the 'example cell' to look at.
View Replies!
View Related
Looking Up Row Array Data In Column Array
On one sheet (KPI) I have either the values "x" or "" in the range A84:A89 to mark wheter to use the corresponding project in the range B84:B89. On the sheet X-ref I have the same project names in range T4:Y4 and a corresponding target value in T8:Y8 What I want is the sum (or average) of the marked-projects target-values. The result should end up in KPI!G31. In other words I want =sumif(A84:A89;"x";'X-ref'!T4:Y4) but it doesn't work since the first range is an column-array and the second range is an row-array.
View Replies!
View Related
Using Array Variable Instead Of Array Formula
i need to replicate what i did using array formulas with VBA macro (array variable). to make things clear and simple i created an example for illustration only. look at it & u will find what i did & what i need to do ,much of it in writing so that i accurately describe my problem. attached is my example
View Replies!
View Related
Return Array Elements From 2D Array
I'm trying to use an array to carry out string function on a range of excel cells. Here is the code I am using Dim arrXl As Variant arrXl = ws.Range("F1:F" & ws.Range("D1").End(xlDown).Row) For i = LBound(arrXl) To UBound(arrXl) MsgBox (LBound(arrXl)) 'If 1st char is different from 3rd char then remove all of string after 1st char If Left(arrXl(i), 1) <> Mid(arrXl(i), 3, 1) Then arrXl(i) = Left(arrXl(i), 1) End If 'If 1st char is different from 7th char then delete string after 5th char If Left(arrXl(i), 1) <> Mid(arrXl(i), 7, 1) Then arrXl(i) = Left(arrXl(i), 5) End If The lbound function returns the value of 1 as the lower bound, I do not have "Option base 1" set so I was expecting the lbound value to be 0. The first 2 cells in the F column are blank so this may have something to do with it, I am unsure if cells in excel can be null if they can be null one cell may be null and the other may be a zero length string but I am unsure about this. The ubound function returns a value of 487. The code breaks when I try to access an element in the array so it breaks on the line: If Left(arrXl(i), 1) <> Mid(arrXl(i), 3, 1) Then and returns the "Subscript out of range" error message.
View Replies!
View Related
|
TRACKER
