i have a spreadsheet with a column of numbers in increments of 5 ie 25, 30, 35, 40, 45, 50, etc. and an adjacent column of decending numbers ie 275,273,262,250,238 where the numbers in column b decrease by varying amounts each time. for a given value say 37 i want to interpolate between the corisponding values of 35 and 40 to give an answer.
View 9 Repliesi'm trying to write a sheet that records weight from a date and user input
trouble is people are likely to miss days out and i want to fill in the missing dates weight based on actual inputs from other days. if i make it easier and say it like this column A is the weight, column b is the number of days gone
as an example i've made it straight forward but left 4 values out
A1616B161
A1515B152
A14B143
A1313B134
A1212B125
A1111B116
A10B107.....................
I am looking to write excel function that would be able to interpolate between two list of values. One list containing xValues and another yValues and a x value the specified for which the appropriate y value is to be returned. For the moment I have written a short function interPLinear into which I wish to feed an array and then simply add those together. This is so that I can make sure that my syntax is correct. Unfortunately I am struggling with that at the moment. My function looks like this.
Function InterPLinear(xValues() As Double)
Dim Sum As Double
InterPLinear = 0
InterPLinear = InterPLinear + xValues(1)
InterPLinear = InterPLinear + xValues(2)
InterPLinear = InterPLinear + xValues(3)
InterPLinear = InterPLinear + xValues(4)
InterPLinear = InterPLinear + xValues(5)
'I know that there will be only 5 values, will make it generic at a later stage.
End Function
In the spreadsheet I have created a short table with 5 rows and 1 column with values 1 to 5. In another cell I have entered the following =interplinear(A1:A5) and I have tried the following as well {=interplinear(A1:A5)} Could you perhaps tell me how I can correctly access this function so that it does not return #value
I have attached the file if it is needed
I have a question on data interpolation with Excel 2007. Normally, this wouldn't be too much of an issue for me, but for some reason I cannot figure it out.
I'm working on an Income Statement, which is designed for 5 years. I have values 1 and 5, which are given to me (B7: 3,500,000 and F7: 5,200,000). I'm trying to figure out the other 3 years of revenue assuming a growth trend. The values should fill the series B7:F7.
I just have a quick question with regards to two-way interpolation of data.
I have a data table which has x-values, y-values and z-values.
I need to obtain an interpolate value for z, given a value for x and a value for y.
The x value specified is 1.569 and the y value specified is 1.66.
I know how to use the FORECAST formula for a simple x, y table, but I have no idea what to do here when I need to find a z value, given the x and y values.
I have data essentially comprising a set of points with x and y coordinates. Is there a way to index and interpolate between points?
I can use INDEX or LOOKUP to look up a y value fo a valid x value but don't know a way to interpolate if the value is between x values. Is this possible?
I got a table of two columns (A1:B6). One column (A1:A6) got temperature values and the other column (B1:B6) got enthalpy values as a function of temperature values as shown in the attached file. All values in the table are empirical values and I am trying to use them to obtain the enthaly (B11:B21) for my own temperatures (A11:A21).
I can use VLookup formula to do so but it won't be accurate because the enthalpy values are very sensitive to temperature changes. I need to use table A1:B6 and interpolate for temperature values that are located in between the integer temperature valuse. e.g. if the temperature=1.5 (between 1 and 2 in the table), how can I obtain the enthalpy value=15 (between 10 and 20) using the table.
a formula that would interpolate the volume in the below worksheet....
View 9 Replies View RelatedI have an array of data like below:
1
3
5
7
9
I need that array interpolated to say 20 data points but the first and 20th data point must be the actual first and last data point of the array (1 & 9 in the example). I have downloaded the xlfun software but the interpolat function only does 1 point at a time...than as you drag the function down it changes the initial array. Of course I realy have anywhere from 40-60 data points to be interpolated to 100.
With a known X and Y, trying to solve for Z from a table. ie: IF a variable X is defined across a row, another variable Y defined down a column, the data field Z fills in-between. What do I need to use to interpolate for both X and Y to solve for Z?
View 9 Replies View RelatedI have pasted 5 fields with some random values that are in A1 to E1. E is the column I am trying to populate to fill in the missing data for C.
I have written a function that will interpolate between 2 deltas using the dates. Assuming that June 09 will always have a corresponding delta (e.g. here 33) how can i populate the INTERP column using my YINT function. I can do this manually 1 at a time, but the already-filled cells in the Delta column will not always be the same and manually would take ages....
I was using the macro provided by shg in post#6 of this thread: Interpolate Two-dimensional Array? ...
View 6 Replies View RelatedActually, I've created the user defined function (UDF) to interpolate (both linear and bilinear). It's just, I keep getting this annoying error that says "A value used in the formula is of the wrong data type." But here's the kicker...I converted the UDF into a subroutine for trouble shooting, and I was able to step through the entire code and get the correct output.
Function itcinter(efpd As Single, pwr As Single) As Variant
Dim rnge, mtrnge As Range
Dim w, x, y, z, xx, yy, b As Single
Dim scenario, a As Integer
Dim J As Variant
scenario = Worksheets("Input").Range("B1").Value
pwr = pwr / 100#
If (scenario = 1) Then
Worksheets("ITC").Select
'Make table into a range for VLookUp
Set rnge = Worksheets("ITC").Range("A3", [A3].End(xlDown).End(xlToRight))
Set mtrnge = Worksheets("ITC").Range("A3", [A3].End(xlDown))
'If the given value does not match a table value exactly
On Error Resume Next.......................
I have 5 worksheets each with tables that are formatted the same on each sheet. I have named each table as a named range (ex:filter5tsd15BSF). I have a userdefined function that interpolates values for a single table in a vba module. I can make this function work for a single table by calling the function as =Linterp(filter5tsd15BSF,C12) so I know the function is OK. However, I really rather program this some way that all the tables get passed to the function and then a select case for the conditions for which filter and which TSD (15 or 25) will then select the correct table.
View 2 Replies View RelatedI am trying to find some missing values compared to 6 base values. For instance, I have a sheet with some names translated to another language, I am trying to find the languages some names have not been translated too.
For example, if I have six languages, Arabic, Japanese, Russian, Chinese-Simplified, Chinese- Traditional, and Korean to compare too, I want to find any names that are not translated in certain languages.
Sample:
John Japanese
John Chinese - Simplified
John Korean
Martin Arabic
Martin Chinese - Simplified
Martin Russian
Ramon Arabic
Ramon Russian
Sam Arabic
Sam Chinese- Traditional
I need a Macro (not formula) which compares the comma separated values present in Column "I" with individual values present in Column "D" and generate the count of unique values in Column "J".
The sample sheet has been attached for reference.
Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
What I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username
The following is my code
[Code] ....
Above code runs without errors but does nothing.
I have set of data in multiple range ,need to fill the and replace the old values depends upon two column values (AH & AL)
IF Active Calls is "TATA" In AH:AH, and IF Action Onwer Col is "Blank",in AL:AL
Then Fill the Blank cells by Values "SVC" in the col Action Owner,Then Replace Old values by "Updates Awaited" in Status Col(AM:AM)
Find the attachment & basic code take this code for this task
[Code] ....
toggle-2.xlsb
I have some data with recurring key values and differing values in the second column, I need to produce a unique list of key values with the second values concatenated together.(See below)
The data can be 10 rows to 5000 and I can have anything from 5 to 150 sheets (Separate data sets), a macro would go a long way to keeping me sane.
Sample data Required Output
A | B Z
1| 10 | a 10,a,b,c
2| 10 | b 11,a
3| 10 | c 12,a,b
4| 11 | a
5| 12 | a
6| 12 | b
My system is Windows 8 Excel 2010.
I have set of user-form contains with Combox & 2 textbox and to generate report one cmd button
I have 3 different sheet contains report of daily activities ( Dispatch,Closed,Cancel)
If Dispatchcalls Select In Combobox1 ,Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from dispatchcalls Then Save Data Into Excel File As "Dispatchcalls".
If Closedcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Closedcalls Save Data Into Excel File As "Closedcalls".
If Cancelcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Cancelcalls Save Data Into Excel File As "Cancelcalls".
"C:UsersmaniDesktopNew folderLenvo_ReportsONSITE CasesVlokupuf" This is path i stored existing 3 file dispath,closed,cancel
1. Using a formula, I am trying to to obtain a list of unique values (string) (caveat: see #2) from the range E2:E10000 (arbitrarily chose 10000 - the row number is variable)(see #3).
I currently have a formula that seems to work for this purpose but I don't know how to add the condition in #2 (below)
2. To include all unique string values except those starting with the letters "IC"
3. Is there a way to make this formula so that it can only seek values up to the last row, and not go to the 10000th row if not necessary? The E column has no empty cells until after the last row that contains data.
Here is the formula I currently use which serves #1 (above):
[Code] .....
Any way to improve/simplfy this formula for the purpose describbed in #1? How can I add the condition in #2? Can you see a way to include #3? The most important issue here is #2.
Example of desired results:
Column A | Column B
AA | AA
DD | CC
AA | DD
CC |
DD |
DD |
IC |
IC |
I'm running into an issue trying to calculate unique values in a Data column based on a few variables in other columns.
My current formula in Summary tab D4:D19 is
{=SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$H$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))
+
SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$I$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))}
This is currently counting the number of times a date value (data column I) appears for that name (A4:A19) in the data when meeting all of the conditions. I need it to instead count the number of times a unique date appears for that name with the additional conditions met (which all appear to work fine).
The results in the pink highlighted cells (Summary column D) should be:
Names starting with A - 3
All others - 2
I've left some other columns in the data with X's so that I can easily convert this back to my working spreadsheet.
I'm trying to rank the values in cells S32:S38 in ascending order while ignoring zeros and negative values. I also need to rank duplicate values with a unique ranking, so that no ranking value is repeated. I tried the formula below, but the ranking values start at "2" instead of "1" and I can't figure out how to fix it.
Formula:
[Code] ....
I have data similar as shown in the following:
A1A11
B2AA1122
C3B22
D4C33
D44
The idea is to add compare the cells of the first column with the third column. Where same letters/words exist, the corresponding value of the first column should be added to the second column (where no letter exists equally, the space remains empty), so it will look like this
A111
AA1122
B222
C333
D444
the third column always will have at least the same letters as the first column, but new letters/entries can occur.
Is it possible to have a formula where it will retrieve a specific value on one sheet based on matching values? Unfortunately, hlookup wont work as there are several values in the table where the 'lookup_value' is the same.
Example:
On sheet 1 (titled BSRC), I have a table which has a list of values in column 1. On column two I have the 'lookup value' which needs to be matched and all values underneath it to be retrieved from sheet 2 (titled CSRD). The 'lookup_value' range is on row 9 of sheet 2.
I have attached a sample spreadsheet for clarification.
compare some list of values in order to fiind the common values.
View 1 Replies View RelatedI am working on creating a spreadsheet that can be updated by those unfamiliar to excel. I have a master list on one sheet and three separate lists for business, individual, and general. Each list has three columns giving name, address and postal code. There are numerous repeats on these lists and I wanted to hide any duplicates while keeping my cells aligned. So far I have been able to highlight any duplicates, but was interested in some function that would save at least one duplicate while hiding any additional ones.
View 2 Replies View RelatedOne aspect of my Excel-based project involves comparing the operator-entered part number (in Excel) to a predetermined list of part numbers in one column of an Access database table. Right now, my program is telling me that every part number entered in the spreadsheet (50+) does not match any part number in the database, which I've verified to be incorrect. I've checked that both the spreadsheet part number and the database part number are of the string datatype.
To the best of my knowledge, my looping logic seems valid and robust. To the best of my knowledge, there are no hidden characters in either the database cells or in the spreadsheet cells causing this apparent mismatch. I'm completely stumped at this point as to why my program doesn't detect any matches between the spreadsheet and the database table. Below is the Sub containing the code for checking that the part numbers match:
[Code] ....
This issue seems to be a hybrid issue between Excel and Access with (to me) more of the issue on the Access end.
I have .csv file from which the data is importing to master schedule. i have a column in .csv file which is spitted into multiple columns. and my need is i have to compare this each individual cell value with the range of header values in master schedule and if match found i have to place that cell in the row.
I am adding 2 attachments one is .csv and other is master schedule.
I couldn't able to find where i have to attach my files.