I have put together a workbook that utilzes 28 seperate worksheets. Of which I currently get it to show 9 worksheet names. Is there a way to show more tab names, like by having 2 rows of tabs instead of 1 or something like that?
View 5 Replies
I have looked through alot of this board and see the codes to hide all tabs old and new and code for each sheet.
My question is:
Is there a macro that can be used to do this as well. Say a button to hide all tabs and a button to show all tabs or does it only hide/show when the workbook is re-opened?
You could use:
If ActiveWorkbook.Sheets.Count < 17 Then
Application.CommandBars("Workbook tabs").ShowPopup
Else
Application.CommandBars("Workbook tabs").Controls("more Sheets...").Execute
End If
The code doesn't do anything on my excel workbook which currently has like 20 workbooks, and it grows daily by like 4 or 5 worksheets.
I have been trying to get Excel (2007) to change the colour of tabs to match other tabs in the workbook
Using this code I get the colour code of the current tab
Code:
x = ActiveSheet.Tab.ColorIndex
But when I use this value in a procedure like this:
Code:
ActiveSheet.Tab.ColorIndex = x
The tab is a different colour!
I have a summary page that includes the titles for each tab within the excel 2003 workbook. I want to use the names of the tabs in the summary page and create it into a formula to lookup fixed cells within the various tabs. Sorry for not uploading an excel doc but I was at work earlier and the thread did not load for some reason, so I am reposting it.
View 3 Replies View RelatedI'm using Excel '03SP2 on Win 2000sp4. I believe I have a case where old tabs originally written in Excel ' 97 behave differently than new tabs in the same workbook, which is saved in 2003 format.
Specifically, the formula ="PLAN" & budyr-1 where budyr is a named range on a different tab containing 2008 . This formula yields PLAN 2007 on a new tab and #VALUE! on an old tab.
How do I get Excel to update the old tabs so that they behave as Excel 2003 tabs?
I have an excel 2003 sheet that collects data from Infopath forms. The forms are to record students who have broken school rules, when, where, repercussions etc. One column shows their class and there is a separate column for each rule broken.
I want to create another sheet to show each class down the rows and the columns to show each school rule. Therefore, each cell would show the number of each particular rule broken for each particular class. I have tried to do countif and sumproduct (if on sheet 1, column B the class is KA and on sheet 1, column M, the rule is bullying = how many times this has occurred).
I have a column of data held in column B.
I am required to show the following.
If there is data in the cell then it is to be left. If there is no data in the cell then I would like to show the value 0.
I have tried using a circular reference, using the formula =IF(ISBLANK(B1),0,B1) and other similar formulas but they dont work as the formula overwrites the data in it.
do I need a macro?, or conditional formatting?
i use function countif "aa" in range A2:F2 COUNTIF(A2:E2,"aa")how i can do, if i do not need 0 to show when it not found "aa". i want it show blank
View 4 Replies View RelatedI have 2 different formulas that I need changed in a similar way.
The first formula is for cell AV11:
=SUM(BI11,BP11,BW11,CD11,CK11,CR11,CY11,DF11,DM11,DT11,EA11)+10
Every cell starts off blank.
What I need is for cell AV11 to always start off blank until data is entered into one of the other cells. The problem is that since the sum always needs to be +10 only when data is entered in the other cells, I don't know how to keep 10 from showing in cell AV11 when no data is typed in the other cells.
The other formula is for cell CO39:
=(CU8)+3
I pretty much need the same thing. If no data is entered in cell CU8, then I do not want cell CO39 to show the 3.
Is there anyway to have tabs within tabs? Right now there are only two layers...workbooks and worksheets within workbooks (tabs). Is there anyway to have more than two layers?
So right now:
1) Workbook
a. Worksheet
b. Worksheet
Can we get to:
1) Workbook
a. Worksheet
i. ?
b. Worksheet
i. ?
ii. ?
No?
I am trying to run a VLookup across 19 tabs. The formula and result are below
=Vlookup(2255099,INDIRECT("'"&CENTERS&"!A5:R395""),13,0) returns a #VALUE
When I evaluate the formula, the result is:
=Vlookup(2255099,INDIRECT("'"&#VALUE&"!A5:R395""),13,0)
Does the #VALUE where CENTER was mean there is a problem with my Named Range?
Is there a way to group tabs? For instance, I have 3 tabs that go with one section and 3 with another and so forth. Is there a way to group them? Also, can you change their color?
View 3 Replies View RelatedIs it possible to Sum across sheet tabs, if so how?
View 8 Replies View Relatedif there is a quick way to add any number of tabs to a spreadsheet.
ie one particular spreadsheet i need to have 32 sheets (tabs) but am getting seriously bored to right click insert worksheet time after time. there must be a quicker way?
i have included an example spreadsheet, hopefully someone can help me
i want a print button that when pressed with always print 'tab 1' and will print 'tab 2 3 4 etc... if a certain cell in 'tab 1' is greater than zero
please see my example spreadsheet and hopefully my problem will become clear if ive not explained myself very well.
I am having some trouble with a handy formula I learned over this forum and its application between two tabs.
Referencing the attached workbook, the formulas in cell C6 & C7 are working for the end range I want, but the first section doesn't want to work. I'm not sure if it has something to do with the quotes (") or not.
I currently have the following code below set up which sends out two seperate emails to the same person out of excel. I'm trying to combine this to only send out one email with both tabs:
View 2 Replies View RelatedI have a workbook where each tab represents a 'base.' You can select which base to view by selecting an option from a drop down box on a menu page.
The data for each base is of a confidential nature so I would like to password protect each tab so that it asks for a password BEFORE the page opens. I don't think Excel has the functionality to do this unless I make the pages 'Very Hidden'?
I have a workbook with several tabs. The top tab is the main spreadsheet
were I enter all my gathered data. The other tabs are the same spreadsheet,
the same data, but broken out by specific building.
Right now, I enter the data (alpha and numeric) into the main spreadsheet,
then manually copy/paste it to the respective sub-level spreadsheet.
I can specify the "IF" part of the line item that would identify which sheet
to copy it to, but is it possible to have a "THEN copy and paste [these
cells]" to the other spreadsheets?
How can I get my tabs to collaborate. If I make a change to the main tab I would like it to carry out through the rest of the tabs. Like the table format and formulas.
View 1 Replies View RelatedI have a file with around 20 tabs. Can I merge all the tabs into just one tab?
View 1 Replies View RelatedIs it possible to create tabs within a tab? If so how?
View 1 Replies View RelatedHow can I get the worksheet tabs to show?
I have gone to : Tools,option and the sheet tabs box is checked
I have created a simple button that I want to take me to a certain number of tabs.
I have about 24 tabs. I can't see them all. I create a button that will take me to a specific tab from my main page. This works fine till I rename the tab. I want the code to read a sheet number or something like that instead of the specific name.
Sheets("JobList").Select
Range("A8").Select
This works till i change the name "JobList"
To automatically make the name of a sheet tab the same as in cell A8 of the same sheet, I'm currently using the following code ...
Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
ActiveSheet.Name = Range("A8")
End Sub
however, I find that if I change the name that is in cell A8, the tab name doesn't change accordingly.
I need a code that will name the tab whatever is in cell A8 but also be fluid enough to change the tab name if the contents of cell A8 changes.
I do not want this code to operate all sheets, but only a few.
Is there a way to rename tabs from a seperate list. Or link the Tab name to a list?
View 9 Replies View RelatedI have a workbook with roughly 100 tabs and a summary tab for the data within the 100 other tabs. on the summary tab I have column A with the name of each tab, i would like to copy a formula down column B that pulls the data from each tab on cell C5 for example, maybe even look up other info too, but that is another question.
What i need to know is can i write a formula that uses the tab named in column A and pulls the cell C5 from that named tab without having to manually change the name of each tab in the formula?
The basic formula would be ='17003.05'!C5 however since i have 100 tabs, i did not want to have to go in and edit each tab name.
I am unable to view my tabs in excel - the tabs are there, they just can't be clicked on per say. I have double-check the tools option and verified the correct box is check to view tabs, however, I can't view the tabs. I tried to color a tab and it colored it red, but I can't really view the tab. I can see a red line underneath the directional arrows when I am working on that particular worksheet, but again, I can't view/click on the tab.
View 9 Replies View RelatedI have in column M ( starting at M2 and going through to M273 ) a list of names I wish to have new Tabs automatically made for.
There are some cells in this column that are blank and therefore have no name.
I need each new Tab to be a copy of a template sheet called 'DataTemplate'.
I am currently using the following formula, and I have it pasted in the sheet code of the worksheet where the list is found ....
Sub test()
Dim r As Range
On Error Resume Next
For Each r In Range("m2", Range("m" & Rows.Count).End(xlUp))
If r.Value "" Then
Application.DisplayAlerts = False
Sheets(r.Value).Delete
Application.DisplayAlerts = True
Sheets.Add.Name = r.Value
End If
Next r
End Sub
However, the new Tabs are not being generated. I've tried saving the file, exiting and coming back in, but still no new Tabs.
What am I doing incorrectly ?
