This macro clears all the contents of each sheet to which it refers, however, after putting it to use I find that I need it to clear only columns A-G starting at row 10. I am not sure how to modify it to do so though. Actually it would be even better if it would only clear columns A, B, C, E, F, and G.
View 14 RepliesI have a macro that copies data into another sheet (OR) from sheet1 (EDS) but as I don't want the data added from the last row I want it to overwrite and clear any data that was there before. However I still want to keep my headings which occupy rows 1 and 2.
This is the code I was using...
Sheets("OR").Select
Rows("2:30").Select
Selection.ClearContents
Sheets("EDS").Select
This is pretty inefficent but it works. I don't want to make a new macro I like keeping it inserted in my current one. However I couldn't figure out how to get it to delete the rows past row 2 (it could go to infinity but I don't think there will ever be more than 30 rows of data).
Macro to clear contents of entire row if any cell in Range A2:A17 is Empty.
View 9 Replies View RelatedIm looking to ensure the sheet contents are clear before continuing with the macro routine. At the moment however, the macro runs I see the data flash up and then off. So it appears the data is being cleared as soon as it loads. Current code is:
View 2 Replies View Relatedis their away to print a sheet/s and after printing to delete the contents but still leave a title
View 9 Replies View RelatedSub Delete()
Dim x As Long
For x = 28 To 8 Step -1
If Range("b" & x) = "" Then _
Range("b" & x).EntireRow.Delete
Next x
End Sub
I have written Macro to copy every row in "sheet1" 24 times into new sheet called "NewSheet". but it keep giving me error message. Actually, I don't know why. Can any one please help.
here is my macro
Sub CopyRowsBook2()
Worksheets.Add().Name = "NewSheet"
Sheets("Sheet1").Select
' Find the last row of data
FinalRow = Cells(Rows.Count, 1).End(xlUp).Row
' Loop through each row
For x = 2 To FinalRow
Worksheets("sheet1").Cells(x, 1).Select
ActiveCell.EntireRow.Select
Selection.Copy
' Loop to copy every row 24 times
For i = 1 To 24
Sheets("NewSheet").Select
NextRow = Cells(Rows.Count, 1).End(xlUp).Row + 1
Cells(NextRow, 1).Select
ActiveSheet.Paste
Next i
Sheets("Sheet1").Select
Next x
End Sub
I am looking to create a macro to copy sheet Day(1) and call it Day(2). I would like Y3 to increase one day with the date, I would like Y4 to increase day and 1 and clear data from G35-G65.
View 4 Replies View RelatedCurrently use this macro (see below) but occasionally I have more rows than 842. I could increase to 10000 and this would work but looking for a more automated macro that will automatically remove duplicates from all rows i.e. a macro that works out all rows.
Sub copyTab()
Cells.Select
Selection.Copy
Sheets("filtered_data").Select
Range("A1").Select
ActiveSheet.Paste
Columns("A:A").Select
Application.CutCopyMode = False
ActiveSheet.Range("$A$1:$J$842").RemoveDuplicates Columns:=1, Header:=xlYes
End Sub
I'm having a problem with a macro clearing a formula in a cell. I have the same type of cell that doesn't have the problem but I can't find the difference between the 2 cells or difference in vb that's making it happen. I have to intentionally cause this to happen but don't see why it's happening. Do I need to attach workbook and describe what's happening? I have been copying and pasting from different sources as well as paying to have it created/started but it was expensive(for me) and I make nothing off of it, just use it at work. I am not proficient in Excel or vb but I'm desperately trying to learn as I go so as not to fork out a few hundred dollars again.
here's atleast the vb for the macros:
VB:
Sub clearclientinfo() '
'
'
'
Sheet5.Select
[Code].....
I have a sheet that I want to have a double line border around the outside. Thats easy if there were a set number of rows but in my sheet the number of rows will depend on the size of the rows because of the different amount of information in each cell. So how do I make it print a border around the entire sheet no matter how many rows are in the sheet??
View 9 Replies View RelatedHow can I clear all elements in a sheet, including charts with vba code?
or
How can I select all chart in a sheet and then delete them?
I have many objects in a sheet, for example Picture(from file), Oval, command button... I want to clear these objects. How can I do ?
View 3 Replies View Relatedto clear all the filtering done to the sheet at once. Sometimes it works properly and sometimes it isnt.
Code:
Sub Cleardatafilter()
ActiveSheet.Unprotect "MyPass"
If ActiveSheet.AutoFilterMode Then
[Code]....
I have used the VBA and it works to select all data but I have an issue when there is no data to select beneath the column header. I am running this on multiple worksheets which vary with data week to week.
Sheets("sheet1"). Range("A6:G" & Range("G" & Rows.Count).End(xlUp).Row).Offset(0, 0).Select selection.ClearContents
How can I run this and not have it delete the column header when there is no data? Is there a way to change the formula so that it selects all cell columns of data without defining it?
In VBA, is there code to clear all filters from an inactive worksheet or does the worksheet need to be activated?
View 14 Replies View RelatedI have a spreadsheet that I have created as a door schedule for faculty members at our institution of higher education. The intention is for them to fill-in their office hours and courses along with a few other bits of information. One sheet should have their teaching and office hours and one sheet should not.
These are the cells that should be cleared once the sheet has been duplicated (F30, F31, G30, G31). Once the sheet is duplicated and those two cells' contents has been deleted, both sheets should be printed. Ideally, all of this would be initiated by clicking a hyperlink or something like that.
I have a sheet (1) of data, a1: e200. In another sheet (2) I want to search for values in column B in sheet (1). I want to import the entire row where the value is. The imported row should always go to ex a10:e10 in sheet(2). Because, in sheet (3) I have this letter who gets data from sheet (2) row a10:d10.
How to do this? I can't get it done without copy/paste.,.
I have a list of projects in several rows and at the column "K" is the status of the project, according to the status of the projects if the status is completed I want cut this entire rows and paste to another sheet calls Projects_Completed by using a macro
with VBA on below mentioned data names in column A on that some names are repeated . That repeated names with amount & doc number should be cuted & and paste in the next sheet ie sheet2 help with VBA ....
View 9 Replies View RelatedI need a command to copy an entire sheet into some variable, in order to paste that variable in the same sheet later, if necessary (classical undo functionality).
Something like:
Private Sub CopySheet()
w = Worksheets("test")
...
...
Worksheets("test") = w 'UNDO if necessary
End Sub
My tab ("dados"), has 21 columns, i need clear only column "L"
VB:
Sub CompareRemoveDupes() ' Stanley D. Grom, 04/06/2012
' [URL]http://www.ozgrid.com/forum/showthread.php?t=164160[/URL]
Dim wP As Worksheet, wN As Worksheet
[Code]....
How can I create a msg box which ask's for Yes or no option before clearing a sheet with all contents?
if code is this:
Sub Clear_sheet()
Dim ws As Worksheet
For Each ws In ThisWorkbook.Sheets
If Not ws.Name = "master*" Then ws.Cells.ClearContents
Next ws
End Sub
All I want to do is save a copy of one sheet called "Patient Stock Form", change the name to "Patient Order", and put it into an email. But my code is putting the entire workbook into the email. Here's the code:
VB:
Sub EMAILFORM()
Dim oApp As Object ' Outlook.Application
Dim oEmail As Object ' MailItem
[Code]....
I need a formula that finds each instance in shee1 column "L" where the row contains the text "1st" in them. If that criteria is met then the entire row from sheet1 is pasted into sheet2. I would like the rows pasted in order of appearance.
Example:
"L52" in sheet1 contains the text "1st" so the entire row 52 from column [A to COX] would be entered in sheet2 in A3 and the next instance where "1st" appears would be entered in in sheet2 in A4.
Please see the attached spreadsheet for a better explanation of what I'm trying to accomplish.
first_instance.xlsb
I have a workbook that uses Autofilter.
Column A has data. Column B is hidden, has no data, and is empty.
Colmn C has data, on through the rest of the sheet (to Column AB).
Why column B has no data is unimportant for now. It, however, must maintain its existance and cannot be deleted.
When I select the autofilter sort button on column A, it selects only that column, and not the rest of the sheet. Data is subsequently scrambled.
When I unhide the empty column B and select the sort button on column B, it selects the entire sheet. Data remains intact.
When I select the sort button on column C, it selects the rest of the sheet, but not column A (with data), or B (with no data). Data is subsequently scrambled.
I have a report that I use everyweek and split up into various sheets according to the criteria.
So if any cell in column C contains "Apple", then I want it copied into a new s/s (with the headers). I basically have to do a number of iterations on this, can someone assist please? The main problem I invisage is asking Excel to copy the row into the new sheet underneath the last one.
I have a range of data in Sheet1- if in column D the cell contains the word "Everyday" I need the entire row to be cut and pasted to Sheet2. Does anyone know of a way in which a macro could do this? I would need the entire row to be cut from Sheet1 and pasted into Sheet2.
View 3 Replies View RelatedI want to copy entire sheet from one workbook to another, my code is failing in this line.
Workbooks(Path).Sheets(i).Copy Destination:=Workbooks(Original).Sheets(i + 1).Range("a2")
is it possible to replace the value of all the cells which have value =customer in the entire sheet.
for this first i will have to first search for all those columns which have value = customer and then replace them all.