My tab ("dados"), has 21 columns, i need clear only column "L"
VB:
Sub CompareRemoveDupes() ' Stanley D. Grom, 04/06/2012
' [URL]http://www.ozgrid.com/forum/showthread.php?t=164160[/URL]
Dim wP As Worksheet, wN As Worksheet
[Code]....
I have a workbook with two sheets of data. I want to hide column B of Sheet2 and clear contents of range B2:B50 if the value in A1 of Sheet1 is "a".
View 2 Replies View RelatedI have a sheet1 with following column name Ab,Bb,Cb,Db,Eb,Fb and sheet two contains Ab,Xc,Eb,Sv,Db,Fb,Gm,Cb,Hb these headings are on 7 line of both excel sheet.
Now I want to check each cell under column name Ab in Sheet1 and compare it with all the cells under column name Ab in Sheet2. If both matches then update Cb,Db,Eb,Fb of Sheet1 to the corresponding columns in sheet2 for that column name.
I need to find the data in the sheet SKU & match it to the data in import_215 column F if it matches then delete the entire row (see Attachment SKU3)
View 12 Replies View RelatedI have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.
My attempt is in cell D2 on sheet1.
I am trying to create a macro so that when i save an entry the form sheet looks in the tavela master sheet to see if there is a match on the record number (in the A column) and saves there as an update if it matches and then if there is no match, saves it in the last empty row. this is a column to row copy so it has to be paste special to transpose. also i have a password on the sheet which i use to unprotect then reprotect. i have successfully done these two things separately but cannot combine them! i know not very much about visual basic code just what i have read here and so i am trying to make this code work.
Code:....
A--------------b----------------c
1 abc klm-sometext
2 def nop-sometext
3 ghi def-sometext
4 klm
5 nop ghi-sometext
6 abc-sometext
i want a macro , so that when it is run,
it matches the value in column A with value in Column C
and update the same in Column B
For example the macro should find
A1 Value = abc with C6 Value= abc-sometext
and update
B1 value as = abc-sometext
So after running the macro
the excel sheet should look like this
A-----------------b------------------------c
1 abc abc-sometext klm-sometext
2 def def-sometext nop-sometext
3 ghi ghi-sometext def-sometext
4 klm klm-sometext
5 nop nop-sometext ghi-sometext
6 abc-sometext
Find a match in a column, move over two columns and copy sales amount. I have a column (column A) of week starting dates (52 each -- e.g., 4/10/06, 4/17/06, etc.).
I have captured a date in a vba variable and I would like to search through this column (52 rows) and when I find a match, move over two cells and copy another variable (a sales amount figure)...?
I have to match table column name with the column name in the sheets and get the values from column 6 in sheet2 if "# of values" in sheet1 matches with "Counter" of sheets for the same column.
if ("Table Column Name sheet1"="Column Name sheet2" then
if("Counter sheet2"="# of Values sheet1" then
return "Total # of rows Sheet2" from same row.
I am using Excel 2003.
Sheet 1 ....
I am having a slight VBA issue I need a little help with. I have created a catalog of books in Column A. As each new letter is reached there is a new heading. For example:
Cell A1 : A
Cell A2 : Book beginning with A #1
Cell A2 : Book beginning with A #2
Cell A3 : Book beginning with A #3
Cell A4: B
Cell A5 : Book beginning with B #1
Cell A6 : Book beginning with B #2
Cell A7 : Book beginning with B #3
Cell A8 : C
etc.
What I am looking to do is create a macro for each letter so that if I went to the "B" macro it would make the active cell A4. However the list of books will grow as my library does, so the macros have to find the letter rather than go to a predefined cell.
The code I have so far is (this example is for the letter B):
Sub B()
Columns("A:A").Select
Selection.Find(What:="B", After:=ActiveCell, _
LookIn:=xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False, _
SearchFormat:=False).Activate
ActiveCell.Select
End Sub
However this code finds the first time the letter B is used in a word, not the cell that only has the letter B in it. Also I need to make sure that if the active cell when the macro is run is below the letter that it needs to find that it will still find it. I'm not sure if my current code would do that or not.
I'm trying to do something similar to the Vlookup function (or Index/Match method) but with two or more parameters to match instead of just one. I want to returnn the Row where two columns match the input parameters. Using Vlookup is a problem because it only returns the first one.
Is the standard method to us Vlookup for one parameter, then check the second and if it doesn't match reduce the search field, find the next and check the second again etc? That would work but it would be much simpler if there's a 2 parameter function.
I'm using Index/Match to find a value in another workbook, but there is one value that I want to ignore. For example here is my function --
=INDEX(ZZANALYSIS_PATTERN.xls!$A:$H,MATCH(D8,ZZANALYSIS_PATTERN.xls!$G:$G,0),2)
In D8, the value is Blue. Here is an example with made-up values (X is meaningless values) --
A B C D E F G
X Apple X X X X Blue
X Pie X X X X Blue
When I use the function, I want it to retrieve Pie, but it always retrieves Apple. Is there a way to ignore Apple? I've tried throwing "Apple" in there a couple different ways, but nothing is working. Or, if I can search from the bottom up, that would work as well.
I am trying to use =MATCH to find a value in one column that matches a cell. The cell contains a formula and I want to match to the result.
At the moment it isn't working.
Here's what I have:
=MATCH(G2,$A$2:$A$2189,0)
where G2 is
=K2&L2
i tried using the lookup but it gave a different result. i want to search a value from sheet1 A to sheet2 A and copy the remarks from sheet2 B and paste it to sheet 1 B and if not found leave it blank.
here's the attach file i just trim it down.
I am going to explain the issue with a photo linked below
Capture2 | Flickr - Photo Sharing!
Basically i want to match data from column one with data from column 3 if true then copy the data in column 2 to columns 4 in the same match row.
I need to work with the run times for some equipment. This is just hours and minutes and I get the raw data as like "Pump # 1 - 35:30". This is not date/time data per se, just a raw number of hours. I thought I would format the cells as hh:mm and for 15:00 I would just enter 15 to save time. No go, that becomes 1/15/00 00:00 and displays as 00:00. I discovered that if I just leave the formatting as general and enter 15:00 it works fine and displays right but the formula bar says 3:00 PM (Excel figured to format it hh:mm). When I enter 30:00 it again seems fine but the formula bar says Excel stores it as 1/1/00 6:00:00 AM (Excel figured to format it [h]:mm:ss but I deleted the seconds).
I can just set the formatting as [h]:mm to be consistent and enter the full 15:00 but I guess that after working that out I am just curious - can Excel store hours:minutes as just hours:minutes without turning it into a meaningless date? And without converting it to a decimal number? I don't want to total 1:30 + 1:45 = 3.25; I want the total to be 3:15. Again, it appears that [h]:mm will do what I need but it just seems unelegant to me that it is stored as some weird date and I wonder if it will cause a problem at any point.
table1.jpg
I am looking for a formula that will satisfy the following:
1) find all the values in column "A" that match
2) In column "G", sum up all the values in "F" that go with the matching values in column "A"
3) For example, in rows 14-16, the values in column "A" match. Cell G16 sums up F14:F16
I have a file with multiple column headers and data entries (dropdowns) into the rows. I wanted to create a secondary sheet...like a pivot table..if the vertical and the horizontal are both in the two columns selected it returns a value in the table.
I would use a pivot table, but it is a data entry sheet and the pivot table does not bring up all the horizontal and vertical values unless they have already been selected in the sheet.
I'm looking for a formula that will match columnA sheet1 with columnA sheet 2 and where theres a match (alphanumeric) will copy the whole of the row in sheet 2 onto an entire new sheet.
View 3 Replies View RelatedI am working with a file where I have to clear all the rows where the numbers match. Lets say if there is a row in which /in the amount column/ there is a number: 53 and have another row where /in the amount column/ the number is -53 I can match these two rows and put them to a new sheet. So what I would like to have is something which sorts out all the rows in which the amounts can be matched out. Like 53 and -53, 23587 and -23587, 98 and -98. Is it possible to have something like this? Sorry for the language..
I want to write a Formula or Macro :
To clear Second Leg score in First Leg of Cup match
in Attached file, I explained detailed what to do. [URL]
if u need to know anything about Football,
I have a excel workbook. which have a master data sheet or table as drawn.
[Code] ........
The above sheet is master sheet. I have also worksheets which named are matching with column head from "DARCL", "MMT", SSL"......till "GRT" (No "order" named worksheet is there). So I want to feed data or value as total order in "ORDER" column, (it is not necessary to put the value in each row) and the total value or number is distributed by me in particular column or colums. After data feeding I have required a command button or any button that can copy or show the reference row (customer name) with its cell value in the matched column head worksheet. As example: total order is 200 put in "ORDER" column in row 3, and 200 is distributed as by myself 100 in column "E" (MMT) and 100 in column "H" (RITC) and so on...after this feeding, I click the button and the data will show or copy as table M/S UIW : 100 in "MMT" worksheet and M/S UIW: 100 in "RITC" worksheet.
As example layout of others worksheets.(attach pic)
After click command button on the master sheet the related customer name and the value will be populated in respective matched column head with worksheet. If there is no cell value in master sheet the below mentioned cell are hides.
master sheet.jpg
others worksheets.jpg
(File is attached here)
I am trying to work on Sheet 2(Details per person). I want to be able to display all items in a row that matches the 2 criteria (Skype ID and Date) and the items are based from Master Raw file which is in another sheet. I would like to just use index and match.
I am trying to figure out a formula that performs the following function:
I want it to find the date in column A in Sheet2 in column A in Sheet1 and return the highest value of column D(sheet1) for that same date. Is there a formula that can solve me that?
I attach an example of my worksheet.
I am having some trouble getting a formula to work. I am building a report that pulls figures from a pivot table in another workbook. I am using a vlookup with match function to get the column index to find the relevant data I want. Where I need to add two columns together I am using sum, with the vlookup & match formulas nested in them e.g.:
=SUM(VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("FAID",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("BPCM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMD",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE))
Where:
F13 = Employee number
Column C on the pivot 156 workbook is where the employee number is based.
The Match formula is then getting the column index from the column headings of the pivot table ie. "FAID"
This in itself works fine, as long as it finds a match in the column headings. This is where i get the error as in the above function "COMD" is not in the pivot table. However I need to keep it included as it may appear on a future pivot table. Is there a way of getting the sum function to complete even though later in the formula it can't complete the vlookup? So it will ignore it, or assume the value is zero if it can't find it? The formula probably needs to do this for all the vlookups as some headings may drop off in future pivot tables.
In microsoft word you can clear find criteria like below.
With Selection.Find
.clearformatting
.Replacement.clearformatting
.Text = ""
.Replacement.Text = ""
.Forward = True
.Wrap = wdFindStop
.Format = False
.MatchCase = False
.MatchWholeWord = False
.MatchWildcards = False
.MatchSoundsLike = False
.MatchAllWordForms = False
End With
I'm trying to find the first empty cell in a column on one sheet, then insert the value in the adjacent cell to the left into a cell on a different sheet,
using this formula:
=offset((LOOKUP(1E+307,'[PO Log.xlsx]PO Log'!B:B)),0,-1)
But I keep getting an error popup.
how to reference the drang (named range) and the cell propertly as i keep getting an error.
Everything in the below code works except the parts below in blue
details:
I have in column X lots of names and in column Y (dynamic column
anges as the users chooses them as per the code) and I want to loop through all names in 'X' and if there are multiple of the same names then for the corresponding 'Y' row entry of each be checked and if they are equal (same $ value) then for one of them of cells in the Y column to be cleared.
Basically if the same name appears more than once it will most likley have the same $ value and if i do a calculation on the $'s it will be 2,3,10 times the amount it should be, hence the need for this .
As per the below code I am trying to use 2 for Each loops though I keep getting an error when trying to reference the drng range which has the values in them..
Essentially, I have 2 Sheets:
"SheetWSS" = data to be copied
"SheetWSD" = destination of copied data.
Below is a sample of the data in "SheetWSS"
----------A------------------------B-------------------------C
1------Trade ID -------Description---------System no.
2--------579----------------Loan ---------------------- 7
3--------580----------------Deposit---------------------22
4--------702----------------Deposit--------------------- 11
5--------703----------------Loan ----------------------- 58
6--------732 ---------------Loan------------------------66
7--------733----------------Deposit-------------------- 99
etc...(no more than 10000)
Now, an explanation of the data:
1) I work for a small bank (CORP) that takes deposits and gives loan.
2) CORP books these trades using only system no. 7 and 11; other system nos. belong to customers.
3) When a single trade is booked, the 2 sides of the transaction is recorded (by Trade IDs) . E.g rows 2 and 3 relates to one trade. So if CORP loans money with system no.7 to CUSTB, who uses system no.22, it shows for CORP a loan and for CUSTB, a deposit.
4) Everyday, the data in "SheetWSS" is updated with a different number of rows from previous, but the number of columns remain the same.
So, here's what i'ld like the macro to do:
1) Go into Column C, find system no.7 and 11.
2) For each 7 and 11 found, Copy the next row . So if for e.g, system no.11 was found in C4, i want the ENTIRE ROW 5 to be copied.
3) Paste the entire next row in "SheetWSD" until we have a list of all opposing sides of the same transactions initiated by CORP.
I am currently trying to write a macro that will search a column for different strings. These strings are inside the cell (as in it is not the only value in the cell) and then copy the entire cell over to another column, then delete the two cells to the right of the originally found cell.
Heres an example of what I want to:
There are four columns, the first has a name with both the first and last (amanda white)the second just the first name (amanda), the third just the last name(white), and the forth an organization name. if the first column contains an organzation name, it has to clear out the first name and last name columns, and copy the name column to the organization column.
NAME | FIRST | LAST| ORG|
amanda white amanda white
mike jones mike Jones
pizza hut pizza hut
I have a list of organization keywords to search the first column (e.g. enterprise, variety, management, pizza). I want it to recongnise the "pizza", copy that entire cell over to the organization column and delete the first name and last name for that row.I've been trying to modify a code like this but i can't seem to make anything work.
VB:
FindWhat = "pizza"
For Each Cell In Range("B2", Range("B" & Rows.Count).End(xlUp)) [code]....