I am trying to create dependent list based off of what was selected from the first dependent list.
Example ~> I select something from B3 that then drives what C3 says, but now how do I get D3 to be dependent on what was selected in C3?
I have attached my doc that I am working to get this on, can you take a look and point me in the right direction? The lists are on the other sheet,
I have constructed a user form with a set of comboboxes containing a number of choices. However, the different alternatives depend on each other, and instead of having all the choices available in the second combobox I would like to only have the "correct" ones depending on the choice made in the earlier combobox.
For example;
---------------
A-B-C
Car-Blue-USA
Car-Red-USA
Truck-Green-Sweden
Truck-Blue-Sweden
If I choose Car in the first combobox, I would like to only have the choices [Blue, Red] available in the second combobox, not the full set of data [Blue,Red,Green] and so on. However, I have two problems construction this;
1) If I make the rowsource A1-A4 for the first combobox, I get the alternative [Car,Car,Truck,Truck], not [Car,Truck]. It is possible to come around this problem by making a unique list in addition to the linked list showed above, such as;........
I have a drop down combo box with 4 options in (1, 2,3 and 4). Under this I have a label. What I want to do is have it so if I select, for example "2", then it says "D11 DJJ" In the label. The name of my CBO is CBOCarNum and the name of the label is LBLRegi
View 2 Replies View RelatedI'm trying to continue on this post: Populate Cells After Choice From Drop-Down
I'm trying to expand on CNL's idea. What I need to do is create a spreadsheet that autopopulates two blocks based on the dropdown box that preceedes it. I've got it to partially work, but can't figure out the next step. The differnce between my sheet and CNL's sheet is my drop-down is an indirect data validation.
The easiest would be to have my data in one long list, but my goal is to make it easier on the user to find the specific procedure (I'm trying to build a budgeting spreadsheet for a medical office). So in box A15 there is a list of the different service area, which gives a list of choices in C15 based on the choice selected in A15. My goal is to have G15 and G16 list the cost and charge respectively.
M1 - O3 is the data for Radiology
Q1 - S4 is the data for Labs
U1 - W4 is the data for Office
I have a work book that contains various sheets with different information.
I have two different categories in one of the sheets,1 which contains counties and the other containing districts.
I have done a validation for the county which allows me to pick a county from a drop down list which works fine.I would like to create a drop down list for the districts aswell such that when i select i.e southyorkshire from the counties dropdown list,the districts drop down list will bring only districts in southyorkshire,excluding all the other districsts.hopefully i'll like the same to apply to all other counties.
I currently have a drop down menu in one of my worksheets, in which I have several different text values entered. What I would like to do is link each of those text values to a numerical value, which would be entered in to another cell. So if I select "Option A" from my drop down list, and Option A is equal to 200, I want "200" to show up in another cell. If I select "Option B" from my drop down list, and Option B is equal to 400, I want "400 to show up in that same other cell.
View 4 Replies View RelatedI want to make a lesson table which distribute the names to lesson choice priority.
You can see detail and explanation at attached file. LessonChoice.xlsx‎
I have a worksheet that has 8 activex listboxes. Each listbox is tied to the sames list of values (identified as a named range). The named range is a list of countries. Each country should only be selected once, therefore, I would like the selected country(ies) to not show up as a choice when the user makes a selection from another listbox. If this is too hard, maybe we can get a msgbx to appear anytime the users tries to select a country that has already been selected.
View 3 Replies View RelatedI need to amend that column to display 26 Mar ( or 12 Dec or 17 Apr etc depending on value).
Try as I might, using format cells, nothing results in the required display. I'm not even sure what format the cells were in as received, since highlighting the received column and selecting "format cells" does not reveal the initial formatting. If I try pasting special to a new column and selecting values, I just get the numerical date value as a 5digit number.
I'm trying to get the syntax correct, and not getting it right.
I need to calculate the Standard Deviation of values, but calc it based on more than one dummy variable.
EG: I need to Standard Deviation using data in column A, if the value in Column B (same row) is 1, and the value in Column C (again, same row) is 0. Right now, I have to reorder the data and calc it, then copy n paste values. I'd MUCH rather have a longer function so I don't have to reorder the data over and over again, and add and delete rows, etc.
I know it's a nested IF AND function, or I think it is, I just can't seem to get the syntax correct.
I got 2 sheets one with Employees name in col A number of hours worked in col B. Second sheet is download form time clock which has Name in Col A and Hours worked in Col B and other details in other columns. I want MACRO to delete matching rows depend on Col A and Col B .
View 9 Replies View Relatedi am wondering if there is a way that i can have these cells that depend on formulas to remain blank, until i have my data entered, or that they may remain blank, but give me running totals of only the cells i have inputted.
View 3 Replies View RelatedI am trying to add insert rows using macro.
L column fills with numbers. if L1 value is 5 then below need to insert 5 rows.
I tried below Macro.
But it getting Error.
Sub InsertRowswork1()
Dim LastNumber As Long: LastNumber = ActiveSheet.Range("L" & Rows.Count).End(xlUp).Row
While LastNumber >= 2
If Not IsEmpty(ActiveSheet.Range("L" & LastNumber)) Then
[Code] .....
My problem in the given excel file
1. Sheet1; how to Add "B000" in the List A or "B00" if the digits and 5 in the list
2. Sheet2; how to remove "B000" or "B00" from the list
3. Sheet3; how to highlight difference or find out the difference between to lists
Update_List.xlsx
I have a List of Different Fruits in Cells A1 to A5
Apple
Banana
Orange
Strawberry
Cherry
And I use data validation list in 5 different cells from Cells C1 to C5 then in every cell the list will show all the fruits,
But I want that if I select Any Fruit in cell C1 that should not be included in the remaining 4 cells, and the fruits selected in Cells C1 and Cell C2 should not be included in the remaining 3 cells and so on....
I Used the formula
=IF(C1=A1,OFFSET(A2,,,COUNTA($A$2:$A$5),1),0)
But this works fine if I select Apple in the Cell C1, then the List of C2 Shows all Fruits other than Apple, But if in Cell C1 I select any fruit other than Apple it does not work... (Using Excel2007 & Win XP)
Is there a way to make a drop-down list optional? When I create drop-down lists the user has to make a choice from that list.
Example: a list of doctors. I need the user to be able to select from that list if the patient saw one of those physicians, but if the patient saw another doctor not on the list, I need the user to be able to enter the name of that other doctor. Currently the user has to select from the list or not enter a doctor. I am using Excel 2003.
I have two worksheets, one with detail monthly information and one with YTD information. So let's say the three numbers I want to capture in the YTD sheet are in columns B, G and I on the monthly sheet. January's data might be in B5, G5 and I5. February's data is in B12, G12 and I12 and so on.
On the YTD sheet in cell C2 I link to Monthly!B5 and in C3 I link to Monthly!B12 so cells C2 to C13 on the YTD sheet show the monthly totals from column B on the detail sheet. On the YTD sheet, cells C20 to C31 show the monthly totals from column G on the monthly sheet, so cells G5, G12, etc. And finally, cells C40 to C51 on the YTD sheet show monthly totals form column I on the monthly sheet.
In the past I've always created all these links manually. After creating the links in C2 to C13 on the YTD sheet, is there a way to use a formula in C21 that uses the link in C2 to create a link for G5?
I have attached a file with VBA code. I want to be able to select more than one person in a drop down list (column C) and have those choices show up in that cell. The range you select from is called name, Column H.
I've looked at is a number of ways but my VBA code does not seem to work.
I have a spreadsheet which have data auto inported. (thanks to previous help on here). I have now come up against the next problem.
I wish to make the mark up variable depending on 5 options (workings I13;I17)
the choice is selected in column b after the data has been inported
then down on Rows 75 - 79 i have the totals of my choices.
Unfortunatly i do not know how to do a variable sum
I have attached a copy of the workbook.
I have a percentage based calculation I'm using to estimate monthly expenditures and such.
Say I have a Total Sales Dollars in cell A1
Now I have my total expenditure dollars in cell B1
In cell C1 I have the percentage of what my total expenditures are vs my Sales dollars (B1/A1)
What I would like to be able to do is either be able to enter in the Expenditure Dollars (B1) or the Expenditure % (C1) and have it calculate the other field.
For instance if I enter a value in B1 it will give me C1, or
I can enter a value in C1 and give it a value in B1.
Is it possible to just use these two cells with formulas or maybe a CF??
Not sure if it's late in the day, but my mind is drawing a blank on this.
I have to check boxes which when one is selected performs a function. I want when either one is selected the other is automatically deselected. How can i do this
View 2 Replies View Relatedis ther away of usin 1 button to open any 1 to 46 worksheets
i know i can make a button to open a sheet with the command
sheet2.activate
but this means i would have to have 46 buttons on the fron page and thats to many
is there a way to make a macro that runs on startup
and prompts with a yes/no question, if the user
wants to multiply all new data values time 1.0825,
and after having selected if they do or dont want
to allow that, would it be possible to have the
prompt minimize itself but still be present in
case they decide to toggle that on/off?
I am using an Excel Form, and trying to make the user choose a color for a new tab they are creating. I am currently forcing an input box to pop up when the user adds a new worksheet. The user inputs a name and a new box will pop up asking the user to select a color.
I can get the color box to come up using
Code:
Application.Dialogs.Item(xlDialogColorPalette).Show ' -- 56 colors
But I can not get the tab color to change to the color chosen..retrieve the information from the ColorPalette box?
I also know that this code:
Code:
Worksheets(a).Tab.ColorIndex = 56
Will change the selected "a" tab color to color "56" but I dont know how to retrieve a color from the color palette and insert it where the "56" is...
retrieving color from palette?
Also, is there any othere version of a color palette, that I could show the user? and what would the vba code be for that?
I have 2 option buttons and 3 userforms. The passage between those userforms are made with "next/back" command buttons.
Options buttons are € and $ and they are in the first userform.
If the user make a choice between € and $ in the userform1, the following macro plays
If Me.Dollar Then
Sheets("Data").Range("B2").Formula = "$"
Else
Sheets("Data").Range("B2").Formula = "€"
End If
Problem
The other 2 userforms contains texts that depends on the choice made in the first userform/option buttons (€ or $)
Private Sub UserForm_Initialize()
Application.ScreenUpdating = False
Text1.Caption = Worksheets("Data").Range("B2").Value
Text2.Caption = Worksheets("Data").Range("B2").Value
Text3.Caption = Worksheets("Data").Range("B2").Value
End Sub
so in theory userform initialize should change the text and get what s written in Data Sheet.B2 cell automatically and INSTANTLY. But it only gets the initial choice and when I go back/forward between userforms and even change the € to $ or vice versa the inital choice remains in the next userforms.
I'm trying to set up an Input Box that allows the user to have a set of options to select from. The only things I have found deal with a MsgBox with set options of Yes, No, or Cancel. I would like to allow the user to have multiple buttons, check boxes, or radio buttons to select from. (any of those will work). For example: "Select the Customer Service Representative you worked with: "
-Amy -Jill -Joseph -Christopher
I have a survey with 2 checkboxes for each question. Users need to tick only 1 checkbox for each question. The checkboxes have been created from Forms toolbar. However the feature of checkbox is such that the user can tick more than 1 checkbox.
Is there a way that for each question only 1 checkbox is ticked? I attached a sample for your reference.
I check the FAQ and couldn't understand the advice. How do you create a list to select a number of items to use in a spreadsheet. I wnat to us this list mutiple times in the same spreadsheet.
View 5 Replies View RelatedI have two different modules in my automation - to be specific one module to convert file from LH to RH and another module to do the reverse - convert RH to LH.
I have put up a radio button choice for the user and based on which radio button is selected would like to run that particular module.
Below is my code. It always throws an error "expected variable or function not module"
VB:
Option Explicit
Public Sub MAIN()
If ThisWorkbook.Worksheets("FRONT").OptionButton1.Value = True Then
Call LH_to_RH
[Code]....
I am following the correct procedure to call modules. A few minutes of search said the modules have to be public sub routines
Columns represent each student's test (There are 31 test numbers) The test consisted of 50 multiple choice questions, each listed in each row. The green column shows the correct answer for each question.
I need to tally the score for each test in the orange row.