I have a couple of listboxes and use the mouseup event to do stuff with the row that's clicked.
When a new listbox is clicked I'd like to remove the highlighting or selection from the last one.
I thought this would do it
".Selected(x)= true" where x would be that listbox's list index. But no.
Is there another way?
I have 1 macro that i would like to be activated as soon as i select any item from a form control listbox (doesn't matter which item). i am not using an active X control but rather a form control.
View 5 Replies View RelatedI can add an item from one list box to another using the following...
[Code].....
But I want to be able to remove the item from the listbox by clicking it. Tried this but doesn't work!
[Code] ......
Sorry, should be a simple one...
I can add an item from one list box to another using the following...
It seems that when reloading a listbox (in my case in ppt, but triggered from vba in excel) the ppt application (office 2010) was not highlighting the selected row in the listbox, and was infact also losing the selected row information when the item lost focus.
indication in excel that new data is to be displayed
triggers macro in ppt to fetch data and update:-
1. select the userform and listbox
2. fetch the data from excel worksheet range into a local array
3. save locally the current selected index in the listbox
4. reload the data into the listbox and adjust column widths
5. relocate the old selected item, and set the new selected index
Summary of key Code lines which did not work:
[Code] .....
Code which worked fine:
[Code] .....
So in summary, if you get problems with listbox selected items not being highlighted, double check you are not re-defining column widths after loading the data into the list.....
I have a userform that search for a value in column A, it displays the results in the listbox. Example: Search for value "111" and it brings me back the following results back in the listbox "111 David 35". So this means 3 columns matching data is returned.
I want the following to happen if I double click on the item in the listbox it needs to update the value selected in the worksheet eg. strikethrough the row on the sheet to show item has been selected/done.
Code for my listbox populate:
[Code].....
How can I update column B for each item selected in a Listbox populated as below:
Code:
Dim i As Integer
For i = 0 To ListBox1.ListCount - 1
If ListBox1.Selected(i) = True Then ListBox2.AddItem ListBox1.List(i)
Next i
For each item selected in Listbox1, I want Column B to show "CONFIRMED"
How do I populate a new userform from an entry selected in the listbox. The listbox only lists one item from the original table but I'd like to populate the new userform with related information from the same row.
I'd then like to save this information to a new sheet and store the original information on another sheet leaving the first sheet a table of information yet to be updated.
The attached workbook should make things clearer. The update button is the one in question.
Excel 2007/2010.
Hope this is fairly easy to solve. I have Screen #1 with a listbox with a CLICK event. The event populates a combobox below (with items based on listbox's selection). Listbox is NOT multi-select. Code runs fine manually, i.e., user opens screen selects from listbox, then can select from combobox.
I now what to open and make selections from another form/screen, Screen #2. I've written code to select the proper item from Screen #2's listbox but this does NOT trigger the listbox's CLICK event for me so the combobox isn't populated so I can then make that selection from Screen #1, also. I've tried setting focus to listbox first, then making selection, but that doesn't work.
QUESTION: Is there code that selects from a listbox in a way that mimics the user clicking the selected item in the listbox?
The alternatives I can think of are:
1) Change Screen #2's listbox code from CLICK to CHANGE event, but I'd rather not.
2) Move CLICK event code to sub-procedure and then call from both listbox CLICK and Screen #2 code
3) Some sendkey string like ENTER?
Would be easier to just mimic the user click, if possible.
With frm_Screen2
'Select item type from listbox
With .LBox_Items
[Code].....
I have a worksheet that has 8 activex listboxes. Each listbox is tied to the sames list of values (identified as a named range). The named range is a list of countries. Each country should only be selected once, therefore, I would like the selected country(ies) to not show up as a choice when the user makes a selection from another listbox. If this is too hard, maybe we can get a msgbx to appear anytime the users tries to select a country that has already been selected.
View 3 Replies View RelatedExcel Userform
VB:
'enables user to click [U]highlight and select[/U] an item in ListBox1 and ListBox2 item (same row in index) is also [U]highlighted[/U] (highlighted only not selected)
Private Sub ListBox1_Click()
ListBox2.ListIndex = ListBox1.ListIndex
End Sub
Question: Is it also possible to enable a user to click to select an item in ListBox1 and ListBox2 item is also selected simultaneously (same row in index). Is there excel vb code to do this?
I think the code may be along the lines of the ListBox SelectedIndex property. What would be the Excel VB code equivilant for the ListBox SelectedIndex property, if so?
I am getting close to finishing the drop down menu capability when filling in column L in tab Transactions. However, there is a snag. When I enter part of account say "fin" (the important part here is that the part of the word should not be the beginning of the account name) - then I select an account from the menu - but it does not stay in the cell if the part of the name is the beginning of the account name - all is fine.
View 4 Replies View RelatedI am using this code to hide or unhide rows of text on another sheet:
VB:
Sub ProcessSheet1ChangeOnCellJ7(ByVal Target As Range)
Dim sAddress As String
Dim sValue As String
'Get the address of the cell that changed without '$' signs
sAddress = Target.Address(False, False)
[Code]....
When the "Not Pursuing" list box option is selected (in cell "J7" or "J8" in Sheet 1) I need to add (or over-write) "Not Pursuing" to the range of cells in column "B" (in the "Tasks" sheet), but only for that particular Goal, meaning a limited range of cells in column "B". If the "Pursuing - Show All Tasks" option is selected for a Goal then these same cells need to be blank so that the appropriate person can enter their name into the cell.
The purpose for adding "Not Pursuing" automatically to these yellow highlighted cells is that it will facilitate filtering of tasks by individual in the "Tasks" sheet..
Again I have tried several times to upload a sample file and am unable to, which I know makes it more difficult to solve. (Is there some common mistake people make? I know it's an allowed format and is very small in file size....)
Code solution can be entered directly beneath:
VB:
If Target.Value = "Not Pursuing" Then
ActiveWorkbook.Sheets("Tasks").Rows("29:29").EntireRow.Hidden = False
ActiveWorkbook.Sheets("Tasks").Rows("30:48").EntireRow.Hidden = True
I have about 10,000 part numbers all with descriptions. These descriptions do not follow a uniform logic;
=============
Part 1: 5x10 Red Cotton candy
Part 2: Yellow 6/18 x7 TTC x11 Picture Frame
=============
My dilemma is that I need to figure out a way to remove everything aside from the "5x10" and "6/18 x7 TTC x11" from these descriptions. I just need the the item sizing.
What I've come up with so far is sorting items by description and working with batches of similar descriptions, then doing replace "Red*" with "blank". It works but it still takes me too much time and it's not perfect.
My question is there something else I can do that is easier and more accurate?
I'm trying to automatically add and remove one criterion from an autofilter without disturbing the previous existing criteria The autofilter code sounds like this:
Code:
ActiveSheet.Range("$A$1:$L$47").AutoFilter Field:=6, Criteria1:=Array( _
"Clay", "Grass"), Operator:=xlFilterValues
How would I go about referring to this array and adding another item called "Hard" to any pre-existing elements in this array?
I plan on attaching this code to a button and use it as a filter, so when the button is pressed, the item will be added to the list of criteria, and if it is "un-pressed" the item will be removed.
I'm trying to add an item to a list box in alphabetical order.
Adding them at the end is easy, but is there an easy way to add an item part-way through a list?
THis is what I have so far..
Code:
'goes somewhere else
For Count = 0 To lstEmployees.ListCount - 1
If cmbAmendmentsEmployees.List(cmbAmendmentsEmployees.ListIndex, 0) < lstEmployees.List(Count) Then
[Code].....
I have a userform with a ListBox and I'm trying to refer to each particular item in the Listbox for a range but it doesn't work.
[Code] .....
within the userform contacts, when mouse-over the image two buttons are shown.
I want when one of these buttons are it displays the next image. the names of all images for the contact are loaded in userform1 listbox. also change the name of the label1.caption.
The part im having trouble with is knowing where the current picture name is loacated within the listbox.
on a side note, if insted of using a picture object i use a activex picture viewer thing. Can i play movies within the same object as being used for the pictures.
How do I select the first item in a listbox via code (userform).
Scenerio:
A user starts with listbox3 and makes a selection for a font type. If the font selected doesnt exist on there system (code already taken care of, true or false) I want to automatically set the font to the first item in listbox3 as a default value transparently so the user can continue.
I have an excel column that includes many numbers. I want to add them to the listbox. But there are same numbers in the list. What I want to do is to add each number to the listbox only once. Example:
This is what I have__________________This is what I want
622768____________________________622768
622768____________________________631215
622768____________________________635054
631215____________________________647461
631215____________________________681216
635054
[Code]....
I wanted to make a List box the way we get when we filter any data
Select All
item 1
item 2
item 3.....
I have a list of values available. How can i add these select all option and after choosing Select All how to make all options checked?
I have created a form, with a textbox and a listbox, that loads when the workbook opens.
As the listbox is the 2nd field on the form, I'd like for the 1st item in the listbox to be highlighted once the user tabs to this field from the textbox field, in the event that the 1st item is actually the item the user wants to select. Currently, once you tab to the listbox field, the listbox item has a dotted line around it (forgive my not knowing the correct term to use for this; I would guess the item has focus at this point, it's just not selected), but the item is not actually highlighted. If I use the arrow keys to scroll up or down, then the first item can ultimately actually be highlighted.
I've search this message board, but was unable to come up with a solution. I assume I must not have been using the best search terms.
Currently (a part of) the form's code is:
Dim txtbox_EmplName As String
Dim lbox_Div As String
form_TERdata.txtbox_EmplName.SetFocus
I'm certain this must be simple, but I haven't been able to find a solution. What code would I need to add or change, and where?
I have a worksheet and for data validation, i do have a dropdown. This is working fine.
I am now trying to create a userform. And I feel for data integrity, I should be using a listbox on the form as well.
I have found examples of different ways to load the list, so I don't think this part will be an issue. But what I cannot find, is if the worksheet row currently has a value (say it is the third item on the list), how do I show THAT on my form?
Example, say we have a list of 10 cities.
Orlando
Tampa
San Francisco
London
Athens
Paris
Chicago
Cairo
Seattle
Atlanta
My wordsheet has the rows populated with the cutomers favorite city to visit.
For John Doe (row3) in column 5 is the city "San Francisco"
When I use my nav keys, how would I "stuff" San Francicso in to the display and still have it able to select a different city?
I think this should be simple to answer. I have a userform that has multiple listboxes on it. When the user makes a selection in Listbox1 it highlights the item selected then when the user makes a selection in Listbox2 it highlights that next item and the selection in listbox1 remains highlighted. What I want is to deselect the selection in Listbox1 when Listbox2 is selected. I have tried things like below:
Sub Listbox2_Click ()
Me.Listbox1.Deselect
End Sub
I wunder if it is in any way possible to delete an item if you drag it outside the boundries of the listbox
View 2 Replies View RelatedI'm using list boxes in an excel sheet. What I want to do, if at all possible, is to be able to TAB to the list box and then hit the first letter of the City I'm trying to go to. The list is in alphabetical order, but if I tab to it and want Philly, I want to just be able to hit the P button and get to the Ps.
View 3 Replies View RelatedI have listbox with 1 column source range B6:B25
Some time I want to remove some items before print is there possible to remove such item from listbox as well as corresponding cell without deleting row
I want to select single items in list box available to move to specific worksheet.
View 14 Replies View RelatedI have a 2 column listbox storing Policy Number and Number of pages. Suppose it has 10 records. Now I want the code so that when I double click on a particular policy number of the listbox then I should be able to make the changes in that. (it might be changing the ppolicy number or number of pages if the user types something wrong by mistake)
View 1 Replies View RelatedI am trying to get this code working. at the moment it allowed me to make multiple selection in a listbox. now i want each of the selected item to different cell.
Here is my code at the moment:
[Code] ....
Copy of the excel if need it.
ListBoxMultiSelect.xls