I am trying to get this code working. at the moment it allowed me to make multiple selection in a listbox. now i want each of the selected item to different cell.
Here is my code at the moment:
[Code] ....
Copy of the excel if need it.
ListBoxMultiSelect.xls
I have a Listbox (Listbox2) in column C. The listbox allows users to select multiple items (in this case it is countries). So the user could select 1 or 20 countries based on the previous criteria.
What I would ideally like is for the next column (column D) to automatically list the selected items without having to use a command button in the actualy cell. However, I could put a command button at the end to say "Confirm" which would then transfer the above into the relevant cells.
This is an excel file, and each row would works the same. Basically users are entering products for set up row by row, so the file could be 10 rows or 200.
Just to be clear, it would look a little like this:
Drop Down Listbox
Column C Column D
Canada (Selected) Canada, USA
South Africa
USA (Selected)
I have a listbox with 8 columns. Multiselect is enabled, and it must stay this way. As part of my program, after the user presses a command button, I need to use the row indexes of the selected rows in order to copy the selected information into an array which is then placed in a different listbox, and then delete the items from the original list. Pseudocode of what I want to do:
[Code] .....
But my understanding is that .ListIndex does not work this way with multiselect listboxes. I've tried searching for a solution for a while, but I cannot find one.
Enter Data To Multi Sheet Through Userform. How can I enter Data from entryform to multisheet?
View 6 Replies View RelatedI am not grasping how to setup a multi column listbox (2 columns).
View 13 Replies View RelatedI have a mulit-extended listbox, a textbox and a button on a form.
I have populated the listbox with a list of files from a directory no problems.
First Part (Single Selection):
When I click on one/single filename in the list I want:
1. The textbox to be populated with the name I have selected
2. When I click the button (With the single filename selected, I want to call a function passing the filename I have selected.
The function could contain a msgbox(selecteditemname) for now.
Second Part (Multi Selection):
When I multi select filenames from the list I want:
1. The textbox to be populated with "Multiple Files Selected"
2. When I click the same button as before (With multiple filenames selected, I want to call a different function and pass each filename individually in may be a for loop)
The function could contain the loop and with each filename in the loop msgbox(selecteditemname)
I have tried the above and noticed that the listbox1.value property for multi listboxes dont seem to work and I am not really sure how to distinguish between one selection or multiselection to get a button to pass off to two separate functions.
I am reading info from a sheet via array into a listbox which displays the results on a user form. One of the columns has a long text and I need to wrap the text.
From my searches I think I need to have an actove x listbox.
I have right clicked on the toolbox but can not see one with the name for active x lisrbox.
what one I should select and if possible how to set it up to wrap the text.
I have written a VB-excel program after a lot of reading on this forum. Purpose of the program is to load a number of log-files with lots of data.
I load these files in a 2 column listbox, were the 1st column is the name of the file and the second column is a number, starting with 1, 2, 3 etc.
Since I don't get the files in the order I want them to be, I created a button to change the number in the 2nd column.
Now my problem: I need to sort the listbox according to the 2nd column. I have a routine that works ok, but whenever I make a mistake like duplicate numbers in the 2nd column, I lose all the data in the listbox and can start over again.
Dim listarray(20, 2) As Variant, Log_name As String, k, i, n, m, listnum, pos, remove_num
listnum = ListBox2.ListCount
For n = 0 To listnum - 1
pos = ListBox2.List(n, 1) - 1
Log_name = ListBox2.List(n, 0)
listarray(pos, 0) = Log_name
listarray(pos, 1) = pos + 1
Next n.................
I am using the following piece of code to 'link' a value from a cell in one workbook into another.
ActiveCell.FormulaR1C1 ="='[filepath]Front Sheet FIT'!r7c4"
However, i have come across a cell which displays the result of a reference to another cell (something simple like =b32). Normally I would just link to b32, however, the macro has to be applied to a large number of documents and in some cases text has been specifically entered, while in others the reference has been used. Is there any way of using VBA to display either the result of a formula (if there is one) or text if this is the case?
I'm trying to add an item to a list box in alphabetical order.
Adding them at the end is easy, but is there an easy way to add an item part-way through a list?
THis is what I have so far..
Code:
'goes somewhere else
For Count = 0 To lstEmployees.ListCount - 1
If cmbAmendmentsEmployees.List(cmbAmendmentsEmployees.ListIndex, 0) < lstEmployees.List(Count) Then
[Code].....
I am currently setting up a userform where one of the options is for an error code (chosen from a listbox) but the user has to be able to select multiple codes. I have the below working if it is NOT multi select, works a dream and goes in the right column.
VB:
If ListBox2.Text = "A1" Then
LastRow.Offset(1, 20).Value = "x"
ElseIf ListBox2.Text = "A2" Then
LastRow.Offset(1, 21).Value = "x"
But as soon as I set it to mutliselect and choose say A1 and A2 neither one writes, I imagine because Listbox2.text is now A1,A2 and not just one or the other.
Is it possible to have a listbox with each line with a different colour?
View 2 Replies View RelatedI have a form with a list box on it, I want the listbox to display a number (1 through 20), the agents name, and a count of how many observations they have had. Unfortunately I have been unable to find an example of how to add multiple columns to a list box. I found the usual listbox1.list(x,x)= "whatever" type stuff but that doesn't seem to work right.
how to populate multiple columns including the headers, or point me to a site that explains it or has code examples?
Here is the data I want to put in the multicolumn listbox (the number and the agent name are from a worksheet, the deskside is a calculation sumproduct based on the 3 sheets that make up the quarter....
Is it possible to have some VBA in Sheet1:
1. That when a user click on a cell in a particular column within a specific sheet:
1.1 That they are presented with a multi select listbox (Showing 20 items stored in a column in Sheet2 )
1.2 And when the items are selected that the items are automatically written in the same cell that was clicked in Sheet1 with a new line break in between each item?
Is there is any chance to AlignRight for numbers and AlignLeft for texts in a multi column listbox?
View 5 Replies View RelatedI have made the function below to return a variant multidimensional array. I pass the function an array of folder paths that I wish to search through looking at subfolders within that path where their name matches a search string that I pass to the function. eg., it will find a folder named "Catnap" if you pass the string searching for as "Cat*".
The size of the array it builds depends on how many folders it finds that match the search string and so needs to be built dynamically. Hence, I believe it builds a 2 dimensional array horizontally and I transpose it at the end of the function. In each element I put the folder name that was found in the first dimension and the path to that folder in its second dimension.
I have a 2 column listbox on a form that I set this array to. eg., Me.ListBox1.List = DirPaths("C:","Cat*",vbDirectory,100)
This works fine and shows a list of folder items found by folder and path in the two columns of the listbox if there is greater than 1 search found. However, when the search only finds 1 then the listbox shows the folder name with the folder path in row 2 of the list box. (See below).....
I have multiple rows within a cell separated by Alt+Enter, and would like to combine them as follows:
Desired Result
First
First
Name
Name
First Name
First Name
I have 1 macro that i would like to be activated as soon as i select any item from a form control listbox (doesn't matter which item). i am not using an active X control but rather a form control.
View 5 Replies View RelatedI have a userform with a ListBox and I'm trying to refer to each particular item in the Listbox for a range but it doesn't work.
[Code] .....
I can add an item from one list box to another using the following...
[Code].....
But I want to be able to remove the item from the listbox by clicking it. Tried this but doesn't work!
[Code] ......
Sorry, should be a simple one...
I can add an item from one list box to another using the following...
within the userform contacts, when mouse-over the image two buttons are shown.
I want when one of these buttons are it displays the next image. the names of all images for the contact are loaded in userform1 listbox. also change the name of the label1.caption.
The part im having trouble with is knowing where the current picture name is loacated within the listbox.
on a side note, if insted of using a picture object i use a activex picture viewer thing. Can i play movies within the same object as being used for the pictures.
How do I select the first item in a listbox via code (userform).
Scenerio:
A user starts with listbox3 and makes a selection for a font type. If the font selected doesnt exist on there system (code already taken care of, true or false) I want to automatically set the font to the first item in listbox3 as a default value transparently so the user can continue.
I have an excel column that includes many numbers. I want to add them to the listbox. But there are same numbers in the list. What I want to do is to add each number to the listbox only once. Example:
This is what I have__________________This is what I want
622768____________________________622768
622768____________________________631215
622768____________________________635054
631215____________________________647461
631215____________________________681216
635054
[Code]....
I wanted to make a List box the way we get when we filter any data
Select All
item 1
item 2
item 3.....
I have a list of values available. How can i add these select all option and after choosing Select All how to make all options checked?
I have a couple of listboxes and use the mouseup event to do stuff with the row that's clicked.
When a new listbox is clicked I'd like to remove the highlighting or selection from the last one.
I thought this would do it
".Selected(x)= true" where x would be that listbox's list index. But no.
Is there another way?
I have created a form, with a textbox and a listbox, that loads when the workbook opens.
As the listbox is the 2nd field on the form, I'd like for the 1st item in the listbox to be highlighted once the user tabs to this field from the textbox field, in the event that the 1st item is actually the item the user wants to select. Currently, once you tab to the listbox field, the listbox item has a dotted line around it (forgive my not knowing the correct term to use for this; I would guess the item has focus at this point, it's just not selected), but the item is not actually highlighted. If I use the arrow keys to scroll up or down, then the first item can ultimately actually be highlighted.
I've search this message board, but was unable to come up with a solution. I assume I must not have been using the best search terms.
Currently (a part of) the form's code is:
Dim txtbox_EmplName As String
Dim lbox_Div As String
form_TERdata.txtbox_EmplName.SetFocus
I'm certain this must be simple, but I haven't been able to find a solution. What code would I need to add or change, and where?
I have a worksheet and for data validation, i do have a dropdown. This is working fine.
I am now trying to create a userform. And I feel for data integrity, I should be using a listbox on the form as well.
I have found examples of different ways to load the list, so I don't think this part will be an issue. But what I cannot find, is if the worksheet row currently has a value (say it is the third item on the list), how do I show THAT on my form?
Example, say we have a list of 10 cities.
Orlando
Tampa
San Francisco
London
Athens
Paris
Chicago
Cairo
Seattle
Atlanta
My wordsheet has the rows populated with the cutomers favorite city to visit.
For John Doe (row3) in column 5 is the city "San Francisco"
When I use my nav keys, how would I "stuff" San Francicso in to the display and still have it able to select a different city?
I think this should be simple to answer. I have a userform that has multiple listboxes on it. When the user makes a selection in Listbox1 it highlights the item selected then when the user makes a selection in Listbox2 it highlights that next item and the selection in listbox1 remains highlighted. What I want is to deselect the selection in Listbox1 when Listbox2 is selected. I have tried things like below:
Sub Listbox2_Click ()
Me.Listbox1.Deselect
End Sub
I wunder if it is in any way possible to delete an item if you drag it outside the boundries of the listbox
View 2 Replies View Related