Populate Separate UserForm From Row Of Selected Listbox Item
Oct 15, 2007
How do I populate a new userform from an entry selected in the listbox. The listbox only lists one item from the original table but I'd like to populate the new userform with related information from the same row.
I'd then like to save this information to a new sheet and store the original information on another sheet leaving the first sheet a table of information yet to be updated.
The attached workbook should make things clearer. The update button is the one in question.
I have 1 macro that i would like to be activated as soon as i select any item from a form control listbox (doesn't matter which item). i am not using an active X control but rather a form control.
It seems that when reloading a listbox (in my case in ppt, but triggered from vba in excel) the ppt application (office 2010) was not highlighting the selected row in the listbox, and was infact also losing the selected row information when the item lost focus.
indication in excel that new data is to be displayed triggers macro in ppt to fetch data and update:- 1. select the userform and listbox 2. fetch the data from excel worksheet range into a local array 3. save locally the current selected index in the listbox 4. reload the data into the listbox and adjust column widths 5. relocate the old selected item, and set the new selected index
Summary of key Code lines which did not work:
[Code] .....
Code which worked fine:
[Code] .....
So in summary, if you get problems with listbox selected items not being highlighted, double check you are not re-defining column widths after loading the data into the list.....
I have a userform that search for a value in column A, it displays the results in the listbox. Example: Search for value "111" and it brings me back the following results back in the listbox "111 David 35". So this means 3 columns matching data is returned.
I want the following to happen if I double click on the item in the listbox it needs to update the value selected in the worksheet eg. strikethrough the row on the sheet to show item has been selected/done.
I have created two dynamic named ranges namely FolderName (refers to B column which has lot of duplicates) and WorkflowName(refers to C column).
For the first combobox, the dynamic named range FolderName is the source. So combobox 1 is populated with 2 values AUDIT, EPG. Here, my intention is "when i select AUDIT from combobox 1, then combobox 2 should be populated with the 3 values which corresponds AUDIT in the source worksheet.
Hope this is fairly easy to solve. I have Screen #1 with a listbox with a CLICK event. The event populates a combobox below (with items based on listbox's selection). Listbox is NOT multi-select. Code runs fine manually, i.e., user opens screen selects from listbox, then can select from combobox.
I now what to open and make selections from another form/screen, Screen #2. I've written code to select the proper item from Screen #2's listbox but this does NOT trigger the listbox's CLICK event for me so the combobox isn't populated so I can then make that selection from Screen #1, also. I've tried setting focus to listbox first, then making selection, but that doesn't work.
QUESTION: Is there code that selects from a listbox in a way that mimics the user clicking the selected item in the listbox?
The alternatives I can think of are: 1) Change Screen #2's listbox code from CLICK to CHANGE event, but I'd rather not. 2) Move CLICK event code to sub-procedure and then call from both listbox CLICK and Screen #2 code 3) Some sendkey string like ENTER?
Would be easier to just mimic the user click, if possible.
With frm_Screen2 'Select item type from listbox With .LBox_Items
I am trying to take selected items from a listbox and put the selected items into an array. Basically I am trying to put the selected items into a variable that I can pass to other modules. I am close but something is off. I can't tell if it's the variable declaration or the code.
I get Run Time error 91. Object variable or with block variable not set
How can I adapt the following code to only show Columns; A, B, E, F and J from Sheet(3) into a Listbox called lbx_LiveAllocations?
As it stands, this code is only adding Column A. My only alternative has been to add all columns on the worksheet to the listbox, however there's a lot of unneeded information between.
Code:
Dim LR As Long Dim ctrl As Object Dim i As Long Dim dic As Object Dim arr As Variant
I've created and coded a vba userform that creates purchase orders for my projects. The user begins by selecting the project code from the combobox (the project code is a unique identifier of each project). Once the purchase order is created, the information is logged in a separate sheet called "POLog" and the userform is cleared. The project code is saved in the first column of the "POLog".
My problem is that when I have more than one purchase order to create for the same project (sometimes I have 20 or 30), the combobox starts out empty and I have to manually select the project code from the combobox. Is there a way to allow the userform to recall the last project code that was used? Maybe recalling it from the last row in the "POLog" sheet?
I have a (MultiSelect) ListBox1 that is populated with Customer Names for the user to select from. I want the user to be able to hit the CommandButton1 adjacent to the ListBox1, and the selected Customers copy into/get added to the ListBox2.
I have the following code, adapted from other code, but it is not working:
Returning items selected from a ListBox. I have a Multiselect Listbox with 15 items. Additionally, I have a worksheet with 15 columns (each one corresponding to the 15 ListBox items). I'm looking for code that will do the following:
After a user selects values from the ListBox (can be more than 1, thus the Multiselect), I would like for "TRUE" to appear in row 2 of the worksheet for each column. (IE: Column A is for Bikes, if a user selects "Bikes" from the ListBox and hits a CommandButton, I would like for A2 to say "TRUE".
I have created a custom Menu (excel add-in) to make my work easy in excel. My problem is to print only selected sheets from Workbook in one PDF file, for that I've created a Userform with 2 listboxes, add sheet and print buttons. In the first listbox are listed all the sheets and in the second listbox are the sellected sheets to be printed. What I've succeded so far is to print selected sheets, but it creates one PDF file for each sheet, only if I put my code in workbook and not in Menu add-in (.xla file). As PDF Printer I use PDF reDirect Pro v2.
So I am supposed to take the names of worksheets and populate a listbox with them, simple enough as I had it running, but now it isn't working. Here is my code:
Code: Private Sub UserForm1_Initialize() Dim ws As Worksheet i = 1 For Each ws In Worksheets Worksheets.Select Sheets(i).Activate ListBox.AddItem (ActiveSheet.Name) i = i + 1 Next ws
[Code] .......
Why it isn't populating the listbox anymore? There arent any errors just a blank box.
I am trying to populate a listbox in a userform using a dynamic list of data in column Y or worksheet "varhold".
Here is my code:
Code: Private Sub Userform2_Initialize() With UserForm2.listbox1 RowSource = ThisWorkbook.Sheets("varhold").Range("offset($y$1,0,0,counta($y:$y),1)") .BoundColumn = 1 .ColumnHeads = False .ColumnCount = 3 End With
End Sub
When I run this procedure, the box is blank. There is no list.
I would like to insert the count of items selected in a listbox in a Userform into a cell. I have been scowering the internet and all of the solutions seem pretty clunky (or don't work).
An alternate way that I could do this is if I have the values selected be entered into a column and then I can use the =count() formula, but I can't figure out how to do that either...
VB: 'enables user to click [U]highlight and select[/U] an item in ListBox1 and ListBox2 item (same row in index) is also [U]highlighted[/U] (highlighted only not selected) Private Sub ListBox1_Click() ListBox2.ListIndex = ListBox1.ListIndex End Sub
Question: Is it also possible to enable a user to click to select an item in ListBox1 and ListBox2 item is also selected simultaneously (same row in index). Is there excel vb code to do this?
I think the code may be along the lines of the ListBox SelectedIndex property. What would be the Excel VB code equivilant for the ListBox SelectedIndex property, if so?
I am getting close to finishing the drop down menu capability when filling in column L in tab Transactions. However, there is a snag. When I enter part of account say "fin" (the important part here is that the part of the word should not be the beginning of the account name) - then I select an account from the menu - but it does not stay in the cell if the part of the name is the beginning of the account name - all is fine.
I have a userform where I can select multiple items in a listbox and add them to another. I also have the ability to filter the first listbox to make finding items easier. The issue I am having concerns the clear filter button. As currently designed, the clear filter button will reset the initial listbox back to its default values. Ideally, I would like it to reset to the default values excluding those values that currently in the second listbox.
The entire code is below for reference, but it's the sub ClearFilter_Click that I am struggling with.
I am using this code to hide or unhide rows of text on another sheet:
VB: Sub ProcessSheet1ChangeOnCellJ7(ByVal Target As Range)
Dim sAddress As String Dim sValue As String
'Get the address of the cell that changed without '$' signs sAddress = Target.Address(False, False)
[Code]....
When the "Not Pursuing" list box option is selected (in cell "J7" or "J8" in Sheet 1) I need to add (or over-write) "Not Pursuing" to the range of cells in column "B" (in the "Tasks" sheet), but only for that particular Goal, meaning a limited range of cells in column "B". If the "Pursuing - Show All Tasks" option is selected for a Goal then these same cells need to be blank so that the appropriate person can enter their name into the cell.
The purpose for adding "Not Pursuing" automatically to these yellow highlighted cells is that it will facilitate filtering of tasks by individual in the "Tasks" sheet..
Again I have tried several times to upload a sample file and am unable to, which I know makes it more difficult to solve. (Is there some common mistake people make? I know it's an allowed format and is very small in file size....)
Code solution can be entered directly beneath:
VB: If Target.Value = "Not Pursuing" Then ActiveWorkbook.Sheets("Tasks").Rows("29:29").EntireRow.Hidden = False ActiveWorkbook.Sheets("Tasks").Rows("30:48").EntireRow.Hidden = True
I have the following sheet which functions as a table to store values for files that have been created using the application which this table is in. In this app., I have a form with 2 listboxes. When the form loads, I have the first listbox list values which each of these files are listed under (i.e. - "sub-directories"). With a selection of one of the list values and clicking of a button, I want the second list box to list the values of cells listed in a range directly below where the selected value in the first listbox came from.
I'd prefer, in the first listbox, to have only the values of the ranges that have a value in them in the listbox. However, this would cause my listbox.selected(array) not function properly. But since my current offsets (in the second sub) do not seem to be working anyway, maybe I am going about this totally wrong.
I have 1 listbox (lisbox1) that retrieve it's list items from a worksheet range (imported/database query from access). This works fine.
I have a second listbox (listbox2) that should display results from clicking a value in listbox1. Listbox1 contains companynames (1 column), listbox2 needs to be populated with quotes.
Range A3:D4800 contains company ID's, Company names, Quote Numbers. When I select a company name in listbox1, I need listbox2 to be populated with all quotes for that company.
I have tried (using vba) to do a vlookup using the listbox1 value, but I cannot seem to figure out how to populate listbox2 with "all" quotes. I get 1 quote and that's it. I realize I probably need to have the vlookup loop through each cell in the range to find the value, but when I try this, I get a type mismatch when using the .additem (only for the 2nd and subsequent passes).
I'm trying to add an item to a list box in alphabetical order.
Adding them at the end is easy, but is there an easy way to add an item part-way through a list?
THis is what I have so far..
Code: 'goes somewhere else For Count = 0 To lstEmployees.ListCount - 1 If cmbAmendmentsEmployees.List(cmbAmendmentsEmployees.ListIndex, 0) < lstEmployees.List(Count) Then
I have a 45 page spreadsheet with over 3500 contacts and the data is currently listed in individual cells as seen below:
John Smith Director of Business Travel Sales ABC Hotel 1200 Market St. Philadelphia, PA 19107 Phone (215) 555-1234 Fax (215) 555-4321 jsmith@abchotels.com www.abchotels.com
I want to convert the each item [data] above into separate columns so I can then save it as a CSV file and then export th data into an email list; but I have no idea how do to this.
within the userform contacts, when mouse-over the image two buttons are shown.
I want when one of these buttons are it displays the next image. the names of all images for the contact are loaded in userform1 listbox. also change the name of the label1.caption.
The part im having trouble with is knowing where the current picture name is loacated within the listbox.
on a side note, if insted of using a picture object i use a activex picture viewer thing. Can i play movies within the same object as being used for the pictures.
How do I select the first item in a listbox via code (userform).
Scenerio: A user starts with listbox3 and makes a selection for a font type. If the font selected doesnt exist on there system (code already taken care of, true or false) I want to automatically set the font to the first item in listbox3 as a default value transparently so the user can continue.
