Looking to extract a numeric value with two letters attached to it from text strings. The text strings vary. Below are the examples I'm looking to extract .51OZ from the first cell, 12CT from the second, and 30CT from the third.
BEANO AD A-G LIQ RS 0.51OZBEANO AD A-G TAB-CHW RS 12CTBEANO AD A-G TAB-CHW RS 30CT
I’m wanting to extract the numeric values & piece of text from the end of a text string. Example data set starting in A1;
Big Box Dom 40*20
Result wanted :
Column B1 : Big Box
Column B2 : 40*20
Column B3 : 40 x 30
I am working with flight numbers and want to split out the letters from the digits. Examples,
BA1234A
BA123
EZY4566H
BE7893B
In column A I need the first two or three letters only,
BA
BA
EZY
BE
In column B I need everything to the right of what appears in column A
1234A
123
4566H
893B
etc.
I have the following data.
Column A is for ID and column B is for Notes.
I need find a formula that will extract the number that is highlighted in red and place it in column C. Would this be possible?
ID
INTERNAL NOTES
355104
[Code] .......
Extract Numeric Part From The String End with a macro, that J8 will turn 8, and R4 will turn 4.
View 9 Replies View RelatedJunior Fit Softstyle T-Shirt
Antique Cherry Red
Junior Fit Softstyle T-Shirt
Antique Cherry Red
Softstyle T-Shirt
Antique Heliconia
Softstyle T-Shirt
Antique Heliconia
Softstyle T-Shirt
Antique Heliconia
This is column a and b. Looking at b I am looking for a formula that will pull the first capital letter out of each word like ACR to create color codes.
I have text strings consisting of about 500 letters consisting of A, C, G and T. I need to switch A-->T, C-->G, G-->C and T-->A across the whole string. I've tried searching for methods and several techniques without success.
View 9 Replies View RelatedI am in need of a formula that will separate a string of text. Specifically, I want to pull out the number values (including cents) from the rest of the text. This is how the text reads:
10.00 OVERDRAFT PROTECTION TRANSFER FEE
10.00
56.00 ELECTRONIC/ACH DEBIT
56.00
199.00 ELECTRONIC/ACH DEBIT
199.00
2,017.64 ELECTRONIC/ACH DEBIT
2,017.64
The data to the left is the data I am working with and the I want the results to read similar to the results on the right.
So for a program I am writing, the user inputs a text string of 200+ alphabetic letters. Only 20 of the 26 alphabet can be in this input (excluding BJOUXZ). What I need to have a macro or function do is check to make sure none of these 6 alphabet letters are present in the string, and also check to make sure no numbers are present either.
Also, I would love for the input text to be converted to Uppercase for all letter as it does this check.
I'm trying to extract alphanumeric data before and after a numeric string. The numeric string is in the middle of a URL, which is a varying distance from the start and end.
Here's a sample of my data:
URL Page ID Headline Section quiz.impression-http://www.stuff.co.nz/2677193 2677193
http://www.stuff.co.nz/travel/267779...flying-JetStar 2677794 Why-I-hated-flying-JetStar travel http://www.stuff.co.nz/technology/di...eo-a-smash-hit 1675213 Wedding-dance-video-a-smash-hit technology/digital-living http://www.stuff.co.nz/national/crim...ce-in-Auckland 2678248 Man-shot-by-police-in-Auckland national/crime http://www.stuff.co.nz/sport/rugby/s...it-for-Blackie 3674350 NZRU-set-to-bend-it-for-Blackie sport/rugby/super-14
I start with just column A and generate the other three from that.
I'm using some excellent code from a Mr Excel guru (thanks again Peter) to extract the 8-digit numeric string in column B, I just need C (after) and D (before).
That macro is:
Dim Bits
Dim c As Range
Dim i As Long
For Each c In Range("A4", Range("A" & Rows.Count).End(xlUp))....................
I have a set of task descriptions that I am attempting to trend on. Some of these (Column B) have the customer's name added to the description; others do not. I need to be able to make a list of task names (ColumnA), removing the name from the text string.
The formula I am using is [=LEFT(B3,FIND("for",B3)-2)].
The problem I am having is when the description does not contain the "for" built into the formula, I get "VALUE" error. What adjustment can I make to the formula to pull over the Description if the "for" does not appear in the text string?
i have a list of 2000 fields which have the same format IE "AB10014"
I need to remove the "AB" from every field and leave the #.
Besides putting a space and running text to columns I'm not sure how.
An original text string entry appearing in an Excel cell would be:
"N7C Neuroprotective J5Z Antiviral, other M2Z Antiarthritic, other J5A Antiviral, anti-HIV"
I need to extract N7C, J5Z, M2Z and J5A from this string and list these alphanumeric values in separate cells adjacent to the original text string. The challenge is that these alphanumeric references may appear in different positions within the original string with no fixed value e.g. a "," separating them. The alphanumeric references may also be 3 or 4 characters in length and there may be different numbers of alphanumeric references in the original string.
Another example would be (very different from the first):
"T2Z Recombinant, other K5B Radio-chemoprotective J3Z Antibacterial, other D3A Vulnerary A10C Symptomatic antidiabetic K6Z Anticancer, other R8A Antiasthma B6A Septic shock treatment I1Z Immunostimulant, other S1Z Ophthalmological R8B Antiallergic, non-asthma M1A1 Anti-inflammatory"
You can see that in this further example "A10C" & "M1A1" are 4 character alphanumeric strings wheras the others feature 3 characters.
I am trying to do is extract the volume size of products in 'ml'
from 10k plus products from a description field cell.
this description field could also contain the weight of the product in grams
so I cannot just do a search for a numeric string ,
it has to be associated with the milli-litres statement .
is is possible to do a sort of ' *ml ' search and then select and copy to another cell ???
I need to be able extract a string from within a longer string. The information I want will always start 5 chracters in and be bordered by an underscore either side, but could be of any length. For example in the following string, I would want to extract WF602.
DDR_WF602_____02_00_001_FLANGE_WR34_4_HOLE_PLAIN_CLEARANCE
I've been looking at the RegExp functions but can envisage problems with this as later parts of the string (WR34) have the same form as the part I need.
I can get rid of the first 4 characters using
I have thousands of address fields that look like this:
100 Broadway, Suite 1101 New York, NY?10005 United States
Sector 30, NH-8 Gurgaon, Haryana, ?122002
61 Broadway 17th floor New York, NY?10006 United States
11 Beacon Street, 3rd Floor Suite 305 Boston, MA?02108 United States
88 7th Avenue New York, NY?10109 United States
600 Pennsylvania Ave SE Suite 220 Washington, DC?20003 United States
1601 Elm Street Suite 3900 Dallas, TX?75201 United States
50 Federal Street Suite 600 Boston, MA?02110 United States
I need to separate the street address, city, state, zip and country.
Is there a relatively simple excel function which will extract the end of a text string. The end has two or three full stops / periods so I would like to count back three to six or more characters and use the full stops as 'cut off points' by passing other full stops?
Column1 Column 2simon.123Function hereAnswer = .12.3dan.123456Function hereAnswer = .123.456andrew.1234567Function hereAnswer = .123.45.67
I would like to extract whole word according to starting string.
I wrote following code, but function " find" is not exist.
Sub GetFullName()
Dim str As String
str = InputBox("Requested String?")
Range("A2").Select
Range(Selection, Selection.End(xlDown)).Select
For Each rng In Selection
rng.Offset(0, 1) = Mid(A2, Find(str, A2, 1), Find(" ", A2, Find(str, A2, 1)) - Find(str, A2, 1))
Next rng
End Sub
Below is a sample of data I need to extract the 8 digit number:
WO_32092_56228491_575482-113476-WP55
WO_32092_56228491_115130-WP55
WO_32092_56228491_115116-115118/115117-WP55
WO_32092_56228491_291881-318903-WP55
WO_259_56748761
WO_13895_52245652COUNTYRDN-30
WO_17368_51421730-A-ADDPOLEINFIELD
WO_17368_50885431-A-ADDMISSINGPOLE
WO_11021_52350485brock3377
In a spreadsheet, I had set up three columns where:
A: removed first three characters. WO_32092_56228491_115130-WP55 to 32092_56228491_115130-WP55
B: removed up to the _ . 32092_56228491_115130-WP55 to 56228491_115130-WP55
C: captured the first 8 characters left. 56228491_115130-WP55 to 56228491
I am pulling the data into Excel via an ODBC where there is thousands of rows of data. The three column process puts a tremendous strain on the processor.
Is there a formula that will extract the 8 character number without a three step process?
I have the following text string.
What formula can I use to extract these results on the right?
Sample file.xlsx
I have an example sheet attached with the value I need manually typed in B and C.
What I would like is the formula to do this without me having too manually (as the full workbook has over 5,000 lines)
The ID will be between 1 and 4 digits and always in the same position
The name cane vary in length, and also be in a different position (depending on the length of the ID)
I'm trying to find a formula which in essence is the same as 'text to columns'.
I'll be pasting in post strings such as: A=B&C=D&E=F etc etc.
I need a formula to break the url so i have all the individual parameters listed i.e
A=B
&C=D
&E=F
Can this be done without a macro? Also i'm not fussed where the '&' belongs either at the front or the end of the text string.
I have several lines with text strings containting three numbers in each line. I need a code to extract all three numbers from each text string. The numbers can be placed on the following columns in each row.
View 2 Replies View RelatedWhat formula can I use to extract this string text.
I need to be able to extract the name after "and"
I would like to extract the name Lana from:
I have a text strings that contains the word "CHQ 123456" or some other CHQ number. There might be another word/words after the word CHQ xxxxxx something like:
Payment by CHQ 123456 against your inv 45225
ABCD Company Limited - CHQ 187546
PO 4520061257/CHQ 745865/invoice Number 4125
I need a UDF that extracts the CHQ No. from the text string
Eg:-
CHQ 123456
CHQ 187546
CHQ 745865
i have used the RIGHT function to remove the 1L/1S and the 1L from the samples belows
the problem i have is when the 1L is in its cell there are 3 spaces before it
how can i remove those spaces so that all the data is to the left of the cell
BYA001 1L/1S
BYA003 1L
I need to extract just the text from cells which contain both letters and numbers. There can be one or two letters, followed by one, two or three numbers. (For info, these are chemical elements and their masses). So for instance,a cell could contain anything from the following B9, B11, S32, Ca44, Mo100, I129, Th226, U238 etc etc. I know I've seen this done before, but I can't find it now. It also has to be formula based, not using VBA.
View 4 Replies View RelatedCREATE TABLES LIKE BELOW?Column 1 Column 2
8 6CSS130 + 2CSS200g x10hanger 200 GM
250ml B2G1 Towel in bagx24 0607 250 ML
18 g-Mint 18 GM
100g 100 GM
150GM 150 GM
i have a data as above, i wanna to extract the 250ml from the column 1, only 250ml (basically i want to extract the size code like 150g, 100gm from the data above).
I am trying to extract numbers after a specific text in a text string, for eg :abc SN 12345 xyzedf SN No. 456 mnoAs per above, i want to extract any numbers afters "SN". the numbers can be vary in digits i.e. it can be 3 digit numbers or 4 or 6. Also, at times there is some other text in between (like SN No.) numbers and search word (i.e. SN)Any formula to get result as "12345" and "456".
View 5 Replies View RelatedAs per title, I am trying to compare a column of text cells which contain "Yes" or are empty and a columns of numbers. If they are "Yes" and "1" on the same row, I want to output an "OK" message. Excel seems happy with the following code but it does not work and returns an empty cell if the two conditions are true.
[Code] .....