I am working with flight numbers and want to split out the letters from the digits. Examples,
BA1234A
BA123
EZY4566H
BE7893B
In column A I need the first two or three letters only,
BA
BA
EZY
BE
In column B I need everything to the right of what appears in column A
1234A
123
4566H
893B
etc.
I receive an extraction from AutoCAD that lists the electrical devices in a drawing. I don't have any problems extracting the letters. I have a problem extracting the device number and the device number extension.
The device label extraction is similar to this:
DCM1005-1
DCM1005-10
DCM1005A
MTR1005-1
MTR1005-10
MTR1005A
I want to create 3 columns from the device label: (I separated the column with commas)
A1, B1, C1, D1
DCM1005-1, DCM, 1005, 1
DCM1005-10, DCM, 1005, 10
DCM1005A, DCM, 1005, A
MTR1005-1, MTR, 1005, 1
MTR1005-10, MTR, 1005, 10
MTR1005A, MTR, 1005, A
I am in need of a formula that will separate a string of text. Specifically, I want to pull out the number values (including cents) from the rest of the text. This is how the text reads:
10.00 OVERDRAFT PROTECTION TRANSFER FEE
10.00
56.00 ELECTRONIC/ACH DEBIT
56.00
199.00 ELECTRONIC/ACH DEBIT
199.00
2,017.64 ELECTRONIC/ACH DEBIT
2,017.64
The data to the left is the data I am working with and the I want the results to read similar to the results on the right.
Looking to extract a numeric value with two letters attached to it from text strings. The text strings vary. Below are the examples I'm looking to extract .51OZ from the first cell, 12CT from the second, and 30CT from the third.
BEANO AD A-G LIQ RS 0.51OZBEANO AD A-G TAB-CHW RS 12CTBEANO AD A-G TAB-CHW RS 30CT
Junior Fit Softstyle T-Shirt
Antique Cherry Red
Junior Fit Softstyle T-Shirt
Antique Cherry Red
Softstyle T-Shirt
Antique Heliconia
Softstyle T-Shirt
Antique Heliconia
Softstyle T-Shirt
Antique Heliconia
This is column a and b. Looking at b I am looking for a formula that will pull the first capital letter out of each word like ACR to create color codes.
I need a VBA function to extract number sequences from a string and separate them with hyphens In the example below cell A1 has the value 'xx2 yyy34 zz515' The code must produce the value '2-34-515' from the above example I have the following function that extracts the numbers but need a way to separate the groups with a hyphen
Code:
Function parseNum(strSearch As String) As String
Dim i As Integer, tempVal As String
For i = 1 To Len(strSearch)
[Code]....
I have the following type of info in A1,A2,A3...
Code:
nameGaryage40cityPittsburgheight190
age30height150
ameLindacityMichigan
citySan Jose
ameHarryheight180age50
My goal is to get as close as possible to this,so it will be easier to sort and manage
Code:
nameGaryage40cityPittsburgheight190
nameLindaage30cityMichiganheight150
nameHarryage50citySan Joseheight180
I can't use the "" sign as delimiter to separate them into different columns because the age,city,name and height fields are in random positions on different cells.The good thing is person's name will always come after "name" string, age is alwals followed by "age" string, so it cannot be like nameheight40Michigan180
I think the following would be the easiest method(not for me tho).If on B1 I had a formula that said "find the string "name" and write anything after it until you reach the next "" character".On C1 field I could have a formula "find the string "age" and write anything after it until you reach the next "" character.On D1 I would have the same for "height" string,then on E1 for city string.
My question is somewhat similar to this one
Extract A String Between Two Characters
Formula which outputs the data between 3rd and 4th instances of the "_" character.Can we substitute "3rd and 4th" with a specific strings like "age" or "height" ?
Code:
=TRIM(LEFT(SUBSTITUTE(MID(A1,FIND("|",SUBSTITUTE(A1,"_","|",3))+1,LEN(A1)),"_",REPT(" ",LEN(A1))),LEN(A1)))
I have a problems here. The problems is attached in the file. I wanna extract alpha/char from a string. Example: I wanna extract the words "(M)" with the bracket from the string "Toothbrush (M)" in column A. After extracting the (M) out, I wanna do a validation to compare the (M) in column B with another data in column C, if the (M) is same as the data called "Medium" in column c, the validation will return "Match" in the column d!
View 9 Replies View Relatedi have a list of 2000 fields which have the same format IE "AB10014"
I need to remove the "AB" from every field and leave the #.
Besides putting a space and running text to columns I'm not sure how.
I've found several posts but none seem to peform this varying function:
EX12345678....Result in Col B: "EX" and Result in Col C: "12345678"
RTZZ4567.......Result in Col B: "RTZZ" and Result in Col C: "4567"
The problem with the formulas I've got specifically define - pulling let's say LEFT, 2 characters.....when, I may need it to pull 2 or 3 or 4. I found something that's smart enough to look for ONLY ALPHA and strip those out and place them into one column. =LEFT(A1,MIN( FIND({0,1,2,3,4,5,6,7,8,9},A1&"0123456789"))-1)
* I need something that's smart enough to look for ONLY NUMERIC. no matter how long the string is...and place those in Column C (like I mention in the example at the top).
I am looking for a while for a macro or a function, which should change needed letters in string into needed ones.
Example:
A1 cell contains words "John Johnson Martinson". I want to switch "n" letter into my specified, lets say "m" and the result should be "Johm Johmson Martimsom".
I would like to get it within range of columnA. Is it possible to get?
A given string of some letters (from three to five, six) is followed by a single number (1-4). Then it ends, or is followed by another such combination, up to a maximum of, let's say, four.
Example:
xxxx1
yyy3yyyy1
xyzxx1yxz4xzx1
xxx2xxx2xxx2xxx2
What I would like to do is to divide a given chain of characters into the smallest chains which contain only letters and one number. To the examples given above, I'd like to receive the following sets:
xxxx1
yyy3 and yyyy1
xyzxx1 and yxz4 and xzx1
... and so on
Is it somehow possible to do it with simple functions? Or is VB necessary (which sadly I don't know)?
I have a set of letters in a single row DISATAGFOORCBORDQFINFCOBBKIEHDSMCNRSKARDFCJSLCQCECFVSBCBOYKPVYKC. I want to distibute them across 5 columns such that each letter occupies one cell. I might want to specify a different column width later on so the solution should be flexible.
View 5 Replies View RelatedI have a list of about 1,400 numbers ranging in different lengths. What I'm trying to accomplish with a formula is to remove the single letter at the end of each number (not all numbers have them) and in addition to removing all zeros at the beginning of the number (again not all numbers have them).
Here is an example...say I have the following 5 numbers:
8014554
45678456
87451245
0008014554b
0008014554c
And what I need my formula to do provide is the following results instead:
8014554
45678456
87451245
8014554
8014554
So far I have started with the following =LEFT(A1,LEN(A1)-1), but that will always remove the last character (number and letter).
I have a list of 3000 strings, all in seperate cells, in a column.
Within each string, are ( say 13 ) letters ( for convience) "A" through to "M" which are of interest to me
The 'letters' of interest occur either once or twice , or none within the individual strings. When a 'letter' of interest occurs within a string , putting a marker in a column on the same row is sufficient.
Using vba, I have extracted the cases where 2 'letters' exist within the strings, by using 3 nested FOR NEXT loops, with an IF test in the middle of
If (InStr(Cells(i, 2).Value, IndexLetter#1) > 0) and (InStr(Cells(i, 2).Value, IndexLetter#2) > 0)Then
and then put my marker in cells(i,3)
where : IndexLetter#1 is set in the outermost of the FOR NEXT loops as one of the 'letters' of interest, and similarly IndexLetter#2 is set on the next inner of the FOR NEXT loop . The inner most FOR NEXT loop ( i ) is the list of 3000 strings
I want to put a marker next to the string , when only ONE of the 'letters' is present in the string AND NONE OF THE OTHERS
I have text strings consisting of about 500 letters consisting of A, C, G and T. I need to switch A-->T, C-->G, G-->C and T-->A across the whole string. I've tried searching for methods and several techniques without success.
View 9 Replies View RelatedI would like to take the below strings and remove any numbers and just leave letters. Or extract the payee from the string. If at all possible, I'd prefer this in a formula.
Card Purchase WAL Wal-Mart Sup 320004 0532 WAL-SAMS CENTRAL LA
Card Purchase WAL-MART #0532 053201 308 N AIRLINE HWY CENTRAL LA
Card Purchase LEBLANC'S FOOD S 874301 209 S. AIRLINE HWY CENTRAL LA[code]....
Basically, (the first line above) I'd like to remove the words "Card Purchase" and any numbers...or preferably just leave "Wal-Mart Sup" instead of the full string. I'd like the product of the first line to match the product of the 2nd line.
So for a program I am writing, the user inputs a text string of 200+ alphabetic letters. Only 20 of the 26 alphabet can be in this input (excluding BJOUXZ). What I need to have a macro or function do is check to make sure none of these 6 alphabet letters are present in the string, and also check to make sure no numbers are present either.
Also, I would love for the input text to be converted to Uppercase for all letter as it does this check.
I've got this problem: I need to separate around 40 alphanumerical entry in Column'A' to Columns'B','C','D','E'..
View 6 Replies View RelatedI have got to extract a series of mixed letters & numbers from a cell. The format of the data i need to extract is always [Letter][Letter][Number][Letter][Letter]][Letter][Number][Number]. The problem I've got is the notes field is not in a standard format as it can be anywhere in the cell.
The table below shows the notes cell & the Data I require.
Notes
Required Data
Fault number AB1ABC12 is complete
AB1ABC12
BC2ABC12 status is unknown
BC2ABC12
pending job ws1abc12
ws1abc12
I have a string that has an IP that doesn't follow a fixed length.
Eg:
10.248.242.65Microsoft SQL Server Compact 3.5 Service
10.248.242.5EOL/Obsolete Software: Oracle Java SE/JRE/JDK 6/1.6
10.248.251.144Microsoft Sync Framework Service Pack
seperate that IP and the String. I tried the below formula =REPLACE(A2,MIN((FIND({"M","E","S"},A2))),0,"?")
It works fine for the above examples, but i want a formula that can seperate the string after the IP ranging from A-Z or a-z
getting any formula so that i can determine atleast the position of the First Letter(A-Z,a-z) from left.
I have the data like this :
03/07/2009;31267400;78168 in Cell A5
And here i want change that data like this :
Cell A6 = 03/07/2009
Cell B6 = 31267400
Cell C6 = 78168
On sheet one, in the column column C I have cells which have characters separated by a space character (For example cell C3 looks like this: "L C"; cell C12 looks like this: "S BF54FR"). There are only a few cells which have more than three characters. The characters are separated by a space character. I would like the macro to do the following: take out each on of the character in put in the same row next column. (For example if in column C has the value: "L C" then in the same row column D should have the value "L" and column E should have the value "C". Or if column C was "S BF54FR" then column D should have the value "S" and column E "BF54FR".
View 6 Replies View RelatedIs there any way to create a macro for the following:
I have the following format
First Name MI Last Name in Column A.
Sometimes there is a space on the last name for someone with a last name Mc Cormick (for example)
Also, sometimes the list of names is short and sometimes the list of names is long. Is there a way to get a "universal" macro in place, that will not depend on the number of names in the list but will be able to detect when the list ends?
So far I was able to run the macro to get them from text-to-column into cells A, B, and C. However, the middle column sometimes contains the last name if there isn't a middle initial. I need a way to test the middle column for more than one character. If there is more than one character, it is a last name and needs to be in the third column.
I'm looking for a short snippet of code to cut all rows with the string "W2 - No P.E Kit" in column E of the Raw Data tab into a tab called No kit. I don't want gaps in the rows of the Raw Data tab however.
View 4 Replies View RelatedIs there a way to separate text from numbers, (other than text to columns)
My data is all different lengths, nothing consistent,plus I want to put the separated data in another column.
Is there a way to separate text from numbers, (other than text to columns)
My data is all different lengths, nothing consistent,plus I want to put the separated data in another column.
I have a script to import all the data in a text file into an excel sheet. However, the data that is imported are in the first column of every row.
for e.g.
123454566788329929201012827192019128278111111111abc213123123123123
there is no comma nor / to separate the string of alphanumerics is there any vba script that i can incorporate to separate the first 3 digit in the first column then 5 digit in the second column then 7 digit in the 3rd columns and etc.
I have a string that follows this format: SAMSUNG CT797F-1
From this string I need to extract 797F only. Further complicating the problem is that its not always SAMSUNG it could be ABB CT797F-1 or KOMSATISU CT797F-1
I have implemented a function that can extract all the numbers, but can't think of how to extract 797F from the various different strings.
I have a list of names in a data set like the examle below. I would like to be able to isolate the last name so I can match the data in this data set with a data set with additional information. The only common set of data I have is the first and last names.
View 9 Replies View Related