i have a list of 2000 fields which have the same format IE "AB10014"
I need to remove the "AB" from every field and leave the #.
Besides putting a space and running text to columns I'm not sure how.
I have a column of cells, some blank, some containing just numbers, some containing just letters, some containing numbers preceded by the the letter 'p'
E.g.
frt
34.2
36
p34.5
In the cells containing the number preceded by the 'p' - i would like to remove the 'p' leaving just the number, with all other cells remaining unchanged.
A given string of some letters (from three to five, six) is followed by a single number (1-4). Then it ends, or is followed by another such combination, up to a maximum of, let's say, four.
Example:
xxxx1
yyy3yyyy1
xyzxx1yxz4xzx1
xxx2xxx2xxx2xxx2
What I would like to do is to divide a given chain of characters into the smallest chains which contain only letters and one number. To the examples given above, I'd like to receive the following sets:
xxxx1
yyy3 and yyyy1
xyzxx1 and yxz4 and xzx1
... and so on
Is it somehow possible to do it with simple functions? Or is VB necessary (which sadly I don't know)?
I would like to take the below strings and remove any numbers and just leave letters. Or extract the payee from the string. If at all possible, I'd prefer this in a formula.
Card Purchase WAL Wal-Mart Sup 320004 0532 WAL-SAMS CENTRAL LA
Card Purchase WAL-MART #0532 053201 308 N AIRLINE HWY CENTRAL LA
Card Purchase LEBLANC'S FOOD S 874301 209 S. AIRLINE HWY CENTRAL LA[code]....
Basically, (the first line above) I'd like to remove the words "Card Purchase" and any numbers...or preferably just leave "Wal-Mart Sup" instead of the full string. I'd like the product of the first line to match the product of the 2nd line.
I am in need of a formula that will separate a string of text. Specifically, I want to pull out the number values (including cents) from the rest of the text. This is how the text reads:
10.00 OVERDRAFT PROTECTION TRANSFER FEE
10.00
56.00 ELECTRONIC/ACH DEBIT
56.00
199.00 ELECTRONIC/ACH DEBIT
199.00
2,017.64 ELECTRONIC/ACH DEBIT
2,017.64
The data to the left is the data I am working with and the I want the results to read similar to the results on the right.
So for a program I am writing, the user inputs a text string of 200+ alphabetic letters. Only 20 of the 26 alphabet can be in this input (excluding BJOUXZ). What I need to have a macro or function do is check to make sure none of these 6 alphabet letters are present in the string, and also check to make sure no numbers are present either.
Also, I would love for the input text to be converted to Uppercase for all letter as it does this check.
I've got this problem: I need to separate around 40 alphanumerical entry in Column'A' to Columns'B','C','D','E'..
View 6 Replies View RelatedI have got to extract a series of mixed letters & numbers from a cell. The format of the data i need to extract is always [Letter][Letter][Number][Letter][Letter]][Letter][Number][Number]. The problem I've got is the notes field is not in a standard format as it can be anywhere in the cell.
The table below shows the notes cell & the Data I require.
Notes
Required Data
Fault number AB1ABC12 is complete
AB1ABC12
BC2ABC12 status is unknown
BC2ABC12
pending job ws1abc12
ws1abc12
I receive an extraction from AutoCAD that lists the electrical devices in a drawing. I don't have any problems extracting the letters. I have a problem extracting the device number and the device number extension.
The device label extraction is similar to this:
DCM1005-1
DCM1005-10
DCM1005A
MTR1005-1
MTR1005-10
MTR1005A
I want to create 3 columns from the device label: (I separated the column with commas)
A1, B1, C1, D1
DCM1005-1, DCM, 1005, 1
DCM1005-10, DCM, 1005, 10
DCM1005A, DCM, 1005, A
MTR1005-1, MTR, 1005, 1
MTR1005-10, MTR, 1005, 10
MTR1005A, MTR, 1005, A
I have words in cell range (i.e. A1:A1000) and I want them to became upper letters.
Excel forum to EXCEL FORUM
how can I seperate small and big letters from one collumn, example:
NAME
name
NAME
NAME
name
name
Is there a VBA command to get the letters, instead of the numbers, of the column of a selected cell?
I have to letter a list whihc means setting up a loop using character codes.
I may have to go into double letters so I am working on how I would set up the loop for if and when it gets past 90 and starts on double letters. so far the highest is the letter "U"
of course the easiest would be to pick up a column value as a letter
NT values do not get a number
A_____ _____NT###
B_____1_______C####
C_____2_______RMK###
D____ _______NT####
i am guessing the loop might involve some arithmetic test between the count and the character set 65-90. or maybe a mod thing.
I am looking for a while for a macro or a function, which should change needed letters in string into needed ones.
Example:
A1 cell contains words "John Johnson Martinson". I want to switch "n" letter into my specified, lets say "m" and the result should be "Johm Johmson Martimsom".
I would like to get it within range of columnA. Is it possible to get?
I am working with flight numbers and want to split out the letters from the digits. Examples,
BA1234A
BA123
EZY4566H
BE7893B
In column A I need the first two or three letters only,
BA
BA
EZY
BE
In column B I need everything to the right of what appears in column A
1234A
123
4566H
893B
etc.
I have a set of letters in a single row DISATAGFOORCBORDQFINFCOBBKIEHDSMCNRSKARDFCJSLCQCECFVSBCBOYKPVYKC. I want to distibute them across 5 columns such that each letter occupies one cell. I might want to specify a different column width later on so the solution should be flexible.
View 5 Replies View RelatedI have a list of about 1,400 numbers ranging in different lengths. What I'm trying to accomplish with a formula is to remove the single letter at the end of each number (not all numbers have them) and in addition to removing all zeros at the beginning of the number (again not all numbers have them).
Here is an example...say I have the following 5 numbers:
8014554
45678456
87451245
0008014554b
0008014554c
And what I need my formula to do provide is the following results instead:
8014554
45678456
87451245
8014554
8014554
So far I have started with the following =LEFT(A1,LEN(A1)-1), but that will always remove the last character (number and letter).
I have a list of 3000 strings, all in seperate cells, in a column.
Within each string, are ( say 13 ) letters ( for convience) "A" through to "M" which are of interest to me
The 'letters' of interest occur either once or twice , or none within the individual strings. When a 'letter' of interest occurs within a string , putting a marker in a column on the same row is sufficient.
Using vba, I have extracted the cases where 2 'letters' exist within the strings, by using 3 nested FOR NEXT loops, with an IF test in the middle of
If (InStr(Cells(i, 2).Value, IndexLetter#1) > 0) and (InStr(Cells(i, 2).Value, IndexLetter#2) > 0)Then
and then put my marker in cells(i,3)
where : IndexLetter#1 is set in the outermost of the FOR NEXT loops as one of the 'letters' of interest, and similarly IndexLetter#2 is set on the next inner of the FOR NEXT loop . The inner most FOR NEXT loop ( i ) is the list of 3000 strings
I want to put a marker next to the string , when only ONE of the 'letters' is present in the string AND NONE OF THE OTHERS
I have text strings consisting of about 500 letters consisting of A, C, G and T. I need to switch A-->T, C-->G, G-->C and T-->A across the whole string. I've tried searching for methods and several techniques without success.
View 9 Replies View RelatedTallying entires from a PDF into excel. Such that
c=1000
d=15000
e=50000
f=100000
g=250000
h=500000
i=1000000
j=5000000
k=2500000
l=50000000
In a cell I would like to type =c+d+c for example and have it say 17,000 rather then me having to type in =1000+15000+1000.
I created this data worksheet with many tabs and multiple users. On the main tab, something weird has happened and I have no clue how it happened or how to fix it....
View 5 Replies View RelatedThis formula will add up the letters D,N,H with one value
Like =SUM(COUNTIF(B4:AZ4,{"D","N","H"}))*12 will =36
How can I add bN =17 bmN =19 bD=24
=SUM(COUNTIF(B4:AZ4,{"bN","bmN","bD"})) to add up to 60
Using the following data
R10-12128
R11-12x12x8
R11-12x12x8
R1-12x12x8
R1-12x12x8
R12-12x12x8
R14-12x12x8
R16-12x12x8
R18-12x12x8
R2-12x12x8
I want it to sort like this:
R1-12x12x8
R1-12x12x8
R2-12x12x8
R10-12128
R11-12x12x8
R11-12x12x8
R12-12x12x8
R14-12x12x8
R16-12x12x8
R18-12x12x8
What is the formula to achieve this?
Looking to extract a numeric value with two letters attached to it from text strings. The text strings vary. Below are the examples I'm looking to extract .51OZ from the first cell, 12CT from the second, and 30CT from the third.
BEANO AD A-G LIQ RS 0.51OZBEANO AD A-G TAB-CHW RS 12CTBEANO AD A-G TAB-CHW RS 30CT
I'm working on a function that will sum a row of cells containing letters and numbers. I am currently using :
=SUMPRODUCT((0&SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(B5:S5,"T",""),"TP",""),"TPE",""),"P",""))+0) as my base.
Right now the formula will work with T, TP, and P; however as soon as I type TPE I get #value.
Either way you get the point of what I am trying to do, however my cells can contain any one of the following combinations:
T,TP,TPE
P,PE,
E
In column A I have the following numbers
13710
14782H
9827
14782
14206B
a formula that looks at this range of cells and returns only the cells that have a letter at the end. The letter range goes A to M
I am a school teacher trying to adjust my tracking sheet to calculate pupils levels. I am looking for 2 potential formulas that will do the following.
1 - In cell AE I would like to generate a formula that will take the data entered in cells J:5, L:5, N:5, P:5, R:5, T:5, V:5, X:5, Z:5, AB:5 and AD:5 and give an average level.
2 - In cell AH is it possible to generate a formula that will calculate how many levels of progress the pupils are making - In other words I need Cell I to be calculated against cell J to see how much progress the pupils are making - for example if in cell I:5, a pupil is was given a 3a, and then in cell J:5 is given a 4b, they will have made 2 sub levels of progress. As well as this, can that progress then be averaged out across cells I:5, K:5, L:5, M:5, O:5, Q:5, S:5, U:5, W:5, Y:5, AA:5 and AC:5 to give an overall number of of levels of progress? An then..... can I colour co-ordinate the cell so that if the pupils are making 3 or more sub levels of progress it turns green, 2 sub levels orange and 1 sub level red?
Levels work like this
3c
3b
3a
4c
4b
4a
5c
5b
5a and so on
i want to convert numbers to letters in the excel Sheet
I.E: when the number is 1000.00$ it write in another cell
on thousand dollar only
1500.00$ one thousand five hundred dollar only
I have a word, for example ROCK. I asigned numbers to the word. R=1,O=2,C=3,K=4. My Question: If I type in ROC it must return 123. If I type in KR it must return 41, etc. Is there a basic formula I can use to solve this?
View 4 Replies View RelatedHow do I do data validation/cell formatting so that only alphabetic characters can be entered and no numbers?
(We use the cell for First Name, Last Name, etc. and I don't want potential entries like Mr. 56565 55454 because the cells are formatted as text and allow alphabet and numbers.)
I tried =NOT(ISNUMBER(H6)) for Data Validation, but that didn't work.
??
VR/Lost
I have in cell A1 the number 2 and in cell A2 the letter m.I want to add these two cells in cell A3 so as to appear 2+m.So i type in cell A3 =A1+A2 but it appears error.Is there a way to do what i am asking?
View 3 Replies View Related