I cannot determine why I am getting an N/A error in Cells I11:L11. The formula is copied and consistent throughout the sheet. The Table referenced in the formula appears to be fine. I just cannot figure this out.
View 5 RepliesI have two sheets, one is "Summary" sheet and the other is "Sheet1". Both sheets has the same template. The "Summary" has color bordered cells and the "Sheet1" has no color. Whenever new color had been added to "Summary" sheet, I would like color from "Summary" sheet to be copied to "Sheet1" in same locations like if red been added to D12 cell in "Summary" sheet, D12 in "Sheet1" will automatically filled in red from "Summary" sheet. Similar to Lookup.
View 3 Replies View RelatedWhen I use this code in the workbook I want it gets as far as creating a new workbook and pasting the data, but then an error comes up saying nothing but "400", and does not complete the saving part.
Private Sub Workbook_Open()
Sheets("Open").Activate
End Sub
Sub SaveASheet()
Dim fName As String
Dim myPath As String
Dim sht As Worksheet
myPath = "K:3. DesignSupply OrdersLog"
For Each sht In ThisWorkbook.Worksheets
If sht.Range("D1").Value "" Then
sht.Copy
With ActiveWorkbook
.SaveAs myPath & ActiveSheet.Range("G11").Value & ".xlsx"
.Close
End With
End If
Next sht...................
Expanding this code to make it do the following:
1. Start w/ "RULE-Table" sheet,
2. Take note of "TODAY" date,
3. LOOKUP date in "RULE-table"
4. Locate Coordinates found in Col D of RULE-Table,
5. LOOKUP the data that resides in those Coordinates on the "PRODUCTION" sheet & COPY
6. PASTE data into "REPORT" tab C2 and E2.
Here's an example to visualize:
Code will do everything it needs to do within an Undisclosed OPEN file with several sheets. The reason the Workbook file name is undisclosed/undefined is because the file name will vary based on clients, so I don't want the code to be limited to look for a specific filename.
*The sheet names within this OPEN client file will always have the same names.
The sheet called: "RULE-Table" holds coordinates based upon "TODAY's" computer date.
For example: If today is JAN 4, the desired coordinates to pull data from are "B5" and "D10" from the "PRODUCTION" sheet.
"RULE-Table" sheet
A......B.........C................D.......
Row1.DAY....WK RANGE....QTR RANGE
2......1/1.......1...............B2,D7
3......1/2.......1...............B3,D8
4......1/3.......1...............B4,D9
5......1/4.......1...............B5,D10
6......1/5.......1...............B6,D11
Since today is 1/4, its rules say go to B2 and D10 of the PRODUCTION tab and collect the data
"PRODUCTION" (data source) sheet (within the same open file)
A.......B......C....D....E....F...
Row1..Header..Hdr..Hdr..Hdr..Hdr.
2.......2.................................
3.......14...............................
4.......13...............................
5.......20...............................
6.......62..............................
7....................76.................
8...................184................
9...................375................
10.................410................
11.................525...............
Last, the collected data from those 2 coordinates should always get pasted onto the "REPORT" tab into C2 and E2 in this example.
"REPORT" (destination) sheet (within the same open file)
A........B.........C.....D....E.....
Row1..Header..Hdr..Hdr..Hdr..
2...................20........410......
This macro below is meant to search a sheet for a user selected value, select the entire row and copy it into a new sheet that has been created under the name of the user selected value. It will create said sheet, but isnt finding the value and/or copying the active cell row. Im not getting any errors so it has no issue with the coding itself, it just doesnt work, have i missed something obvious again?
[Code].....
I have a very basic code to copy "non-blank" data from one sheet and paste to another. The code is not complete yet - I am running in debug mode I get the above error. My code is as below.
Sub SampleFind()
Dim StrWord As String
Dim Quantity As String
Dim i As Long
Call nrows
For j = 2 To 2
For i = 2 To nrows1
[Code] ..........
my lookup isnt returning the correct data- already tried sorting it doesnt work im pretty sure ive put in the correct formula
View 6 Replies View RelatedI have MS Office 2003 with Excel and am comfortable creating formulas and have fun making spreadsheets, but have little experience with multiple tabs. They frustrate me. I'd like to set up a file that would essentially be a year of bookkeeping. Everything in view would be income, outgo, anticipated expenses, and running cash flow for a month. I'd like 12 or 14 tabs (1 per month plus overview and recap capability). If I make any format changes in row height or column width, I'd like those changes to apply to all tabs without having to copy the new layout to each of the other tabs. I think that would run the risk of also copying one months expenses/income erroneously to another month. Is this possible? I'd like to stretch a column, add column or row and have the changes apply to all tabs.
Also, most of the time, I like to have a tinted background behind my lists, but if a cost item needs to be copied from a green "expense list" to a blue "accounts paid" list, the color comes along. Can I copy only the text, not the format?
i have attached a sample spreadsheet that i am having a real problem with. each period i have to produce a report showing the week and period-to- date figures for various sites. the info is held in Adaytum and a view is created in excel that pulls in the data. i then run various formulae to create the report.
the cells in blue are a linked view from Cognos/Adaytum (an external database program). the cells in green contain a SUMIF formula that works correctly until the Adaytum view is changed, whereupon all formula with cell references within the blue area turn to REF#. don't ask me why, it seems to be a quirk of this version of Adaytum i use
so, in the example attached if i change from period 06 to period 07 in the Adaytum view, my criteria cells (B2:E2) would go to REF# and the green cells (J5:J8) go to REF# also.
the only way i have found to get around this is to use a vlookup, and extend the lookup range beyond the blue cells, ie. =VLOOKUP($H5,$A$5:$F$8,2,0). for some reason this works!
now, for a single weeks info this works ok, as the lookup is referencing a single offset column but i can't think of a way of then saying, "do the lookup and then sum columns B+C, or B+C+D"
does anyone have any ideas how this might work? can the Sum or Offset functions be used within a Vlookup?
In the attached file I am simply trying to get a percentage for a given group based on the column "annual starts". When I try and copy down the formula for the other cells it gives me an error because its using the wrong denominator (the errors show up in the excel sheet as #div/0).How can I make this consistent?
View 2 Replies View RelatedThis Subroutine:
[Code] .........
Seems to behave differently each time it is called from my main Loop. As an example the first loop finds:
TotalTubes = 6
TubeRows = 4
TopRowTubeCount = 2
Where 6/4 = 1.5 and is rounded up to 2
The controlling variable in my code for Length is TopRowTubeCount and it is a Public Variable Dimensioned as an Integer
However on the next loop it finds:
TotalTubes = 210
TubeRows = 4
TopRowTubeCount = 52
Where 210/4 = 52.5 and is rounded down to 52?
I even used the round function for the TopRowTubeCount calculation and the erratic behavior continues.
Is it possible to apply some kind of formatting to a range, that will force all numbers entered into that range to have the same number of decimal places as the cell with the maximum number of decimal places?
View 9 Replies View RelatedBasically my code is bombing at the red highlighted code. Error: "Run-time error '1004': Copy method of Worksheet class failed"
Sheet "Blank Form" is a hidden sheet. Can I alter the red section of code to work while being a hidden sheet? I tried a few variations but nothing seems to work..
I have 3 columns of data "Store", "Week" and "Cust" and use the code below to ensure that it was always 150 consecutive rows long regardless of whether any data is in the row.
This is fine if I just have one week to sort, but I find I now have 52 weeks of data and each week could have a different number of stores. I just need the macro below to run each time a new week starts. I can easily put a space (or something else) at the start of each new week so that a " loop" can check for it.
For i = 1 To 150
If ActiveSheet. Cells(i, 1).Value <> i Then
ActiveSheet.Rows(i).Insert
End If
Next
Newbie here. I have a very frustrating problem. I am using excel for my gradebook at school. I've tried several different ways to assign a letter grade to an number average. It works fine each different way I do it, VLOOKUP, IF, etc. But, I have about 5 grades out of 100 which give the wrong letter grade. For instance, my scale says that a grade of 85 should be lowest limit of a "B", but I get a "C" returned in the cell instead. Like I said, it only happens on a few grades. The biggest majority work fine. I can't figure out why. Any ideas? Attached is one of the "problems" with a student's grades. Note the Final Avg with a grade of "C", it should be "B".
View 12 Replies View Relatedas the title says, i need to rotate a range but to keep all defined names (single cell or range) consistent.
i.e.
lets say i have the following cells filled:
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
now i have a few defined ranges. lets say:
range name, refers to
mycell1row1, A1
mycell90roanything, B1
mysomething, C1
mysomthingrange, A1:F1
etc.
what i need in the end is this:
1 1 1 1 1 1 1
2 2 2 2 2 2 2
3 3 3 3 3 3 3
4 4 4 4 4 4 4
and for defined names:
mycell1row1, A1
mycell90roanything, A2
mysomething, A3
mysomthingrange, A1:A7
I have been struggling to get dates to remain in a consistent format within my Excel 2003 worksheets. I would like to work out how to keep them permanently in the "dd/mm/yyy" format. I have tried several formatting options. The current method I will explain below:
I have several forms into which the 'date' is automatically entered using the - Format(Date, "dd/mm/yyyy") code. This is then saved into cells on a worksheet using the code
ws.Cells(iRow, 1).NumberFormat = "dd/mm/yyyy"
ws.Cells(iRow, 1).Value = CDate(Me.Date1.Caption)
At this point if I do a search for a date, lets say 23/03/2012 I can retrieve it and everything related to it - all seems fine (also all dates are visually in the correct format in my cells etc).
The problem arises when I exit Excel and save the workbook. When I go back into the workbook at a later time and try and search for the same date it won't work. Although the dates in the cells still read for example 23/03/2012, the search requires me to now use the format 03/23/2012 to retrieve the information (It seems like in the background the date has reverted to the US date format upon saving and yet visually it is still how I've set it up).
I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6()
Cells.Select
selection.Copy
selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
For which I get 'Compile Error - Expected Function or Variable'
If you look at the attached xlsx file, you'll notice a drop down menu box (C5) which has two options 'wheat' and 'maize'. While the lookup function works fine for 'wheat' (i.e. it returns with the correct values from A33:A34, B33:B34 and C33:C34) it doesn't work for Maize. I've gone through the formula again and it beats me why it works fine for wheat, but using the same idea it doesn't seem to work for the maize option.
View 3 Replies View RelatedSo I can easily put together a formula that maintains a consistent markup price across varying costs. Is there a formula that will give me a consistent gross margin % as I drag down a series of costs?
So if the cost is 158 a 42% mark up would be 224.36 but the Gross Margin % is only 29.58. I want to be able to hit a 42% mark up across the board.
In my workbook I have multiple sheets but I'm attaching a very simple workbook to demonstrate what I'm trying to accomplish. In my "Lookup" tab/sheet. I want to have known Latitude and Longitude data that will exist in columns A&B. Columns C & D will have address numbers and Street Name. I would like my lookup formula to find the longitude and latitude data from my "lookup" sheet, when the matching address information is typed in, in my 2009 sheet. I have to keep the street numerics and street name separate on this worksheet as well. I believe I'll need two separate lookup formulas as I need these formulas to start in cell G4 & H4 in my "GeoCoding1" sheet. Is it possible to have four columns of data to be viewed in a lookup formula? I tried this formula in cell G4 (GeoCoding1 sheet)
View 3 Replies View RelatedIt appears my formula = lookup(B1, {"April","August","December","February","January","July","June","March","May","November","October","September"},{"04_","08_","12_","02_","01_","07_",06_","03_","05_","11_","10_","09_"})
is not complete with the last parenthesis and I cannot exit the cell with the formula as is above. It looks right to me, what am I missing?
Is it possible to do the following with a formula in Excel...
I have a list of users with the dates they first logged into a system and the date they last logged in. I'm trying to group them together into segments so I can analyse them using a Pivot table and chart to see how often different groups are using the system, e.g. New customers in December, November, October, etc.
The trouble I am having is trying to convert the different human-readable text strings into a consistent number of weeks from today's date, e.g.
USER FIRST LOGGED IN LAST LOGGED IN
user 1 2 years 20 weeks 54 sec ago
user 2 44 min 7 sec 1 min 37 sec ago
user 3 49 weeks 2 days 17 min 3 sec ago
user 4 5 weeks 2 days 33 min 32 sec ago
user 5 38 min 9 sec 38 min 9 sec ago
user 6 5 weeks 3 days 1 hour 7 min ago
user 7 2 hours 17 min 2 hours 11 min ago
user 8 45 seconds ago 45 seconds ago
Is there a formula I can use to convert these human readble text strings into a number of weeks elapsed since today's date?
i have two sheets, one to display results (Reults tab) & the other tab containing the data (Data tab)
what i am trying to do is some how create a search function and have a forumula which contains a LIKE function that looks up the data table
RANGE = Data!A2:K255
the search needs to lookup the primary column Data!B2:B255 ... if any results are found .. show them on the results tab.. and if multiple results are found, display those as well.. (in either instance, the whole row of information in respect to the results need to be dislayed and hopefully no duplicates are found .. eg, Data!A:K of a hit)
is there a formula that can achieve this? oh, the search is TEXT based and there should be no empty cells within the dataset
after some MASSIVE googling, i have stumbled accross this
B1 = Search box (txt field)
A6 (which will be a hidden column) contains =MATCH($B$1,Data!A2:A255,0). this formula provides the first instance of the result and provides the row number
A7 contains =MATCH($B$1,OFFSET(Data!$A$1,A6+1,0,8-(A6+1),1),0)+A6.
this is supposed to look for the next row number which contains a match and provide that row number
and througout my other columns, i have
B6=OFFSET(Data!$A$1,A6,1)
B7=OFFSET(Data!$A$1,A6,2)
B8=OFFSET(Data!$A$1,A6,3)
and so on
2 things i cannot recitify..
1, the match has to be EXACT ... unfortunately i cannot use exact .. needs to be LIKE .. eg, i cant use the search word "boat" as the range of data has "boats"
2, it comes up with multile .. irrelevent results.
see attached workbook. I want VBA to insert an index/match forumla on sheet 1 to lookup a value from sheet 2. I don't want it to specify a range though. I want VBA to look to see if there is data above and to the left of the cell and if it is true insert the index/match formula. Then it won't matter what row or column I put the headings in.
View 2 Replies View RelatedThe formula below is returing a 0 when vlookup does not find a match. Is there a way to return a space rather than a error or zero when the lookup is not met....
View 9 Replies View RelatedColumn D = Dates to be used in each of the matches.
Cell C2 = data-validation cell, for choosing the specific Named Range that contains the data to be returned from the closed wb.
VBA code automatically opens the closed data file and then closes it after returning the data to the main file.
find the error in the cell formula (or named range formula) that’s preventing this from working correctly? (see atttached files)
In the attached sheet I am trying to use the formula below but am getting a #NA error. I have narrowed the problem down to the use of the SEARCH and LEFT functions that I am using to determine the lookup value of the VLOOKUP formula.
what I am doing wrong? If I substitute the SEARCH and LEFT function with the number "14" it works just fine. You can find examples of both in cells B29 and C29 on the rename tab.
If lookup doesn't find a match in the first column, can I get it to return an
"ERR" or "0", something that would let me know there was no match? Right now
it returns the value in the second column of the closest value.
=INDEX([ipathfall07shoes.xls]Sheet1!$B$2:$W$139,MATCH(C17,0),1)
View 9 Replies View Related